Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: PetanKovaru 28 Února 2007, 12:44:58
-
Mám takový problém vždycky jsem mohl nastavit 1280*1024 85Hz ale teďkaj de pouze 51Hz nevíte čím by to mohlo být a jak to napravit? Předem všem děkuji!
-
musis poslat xorg jinak nikdo nic nepozna
/etc/X11/xorg.conf
-
Nainstaloval si si najnovsi nvidia ovladac?
-
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Dec 15 10:12:14 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "DELL M993s"
Option "DPMS"
# 1280x1024 @ 80.00 Hz (GTF) hsync: 85.76 kHz; pclk: 149.57 MHz
Modeline "1280x1024_80.00" 149.57 1280 1376 1512 1744 1024 1025 1028 1072 -HSync +Vsync
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV43 [GeForce 6600 GT]"
Driver "nvidia"
Option "XAANoOffscreenPixmaps" "true"
Option "AGPFastWrite" "on"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV43 [GeForce 6600 GT]"
Monitor "DELL M993s"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
Tohle je můj xorg.conf
-
Ano mám nejnovější ovladač...bez něj mi to chodilo ale po instalaci berylu to nešlape
-
to iste sa stalo aj mne po tom, co som si nainstaloval tieto drivere: http://forum.ubuntu.cz/viewtopic.php?id=6060. ukazuje mi to v System->Predvolby->Rozlisenie obrazovky ze mam 1280*1024*51Hz. Roznymi samaninami od reinstalacie po odinstalovanie som sa to snazil napravit, ale nepodarilo sa. kazdopadne to ale vyzera, ze udaj sa sice ukazuje zly (51Hz), ale monitor zobrazuje standardnych 85Hz. K tomuto udaju som sa dopatral jednak empiricky (vidno ze monitor neblika), jednak mi to vyhodil # gconf-editor: Desktop->Gnome->Screen->Default->0. takze sice to vypisuje bludy, ale funguje to standardne.
-
Tak to děkuju mockrát! Protože mi to trošku kazilo radost! Ale když se tak na to kouknu je to pravda nebliká!
-
Možná,že aby se to zobrazilo i v tom menu, mělo by být to rozlišení 1280x1024_80.00 dopsáno i do:
SubSection "Display"
Depth 24
Modes 1280x1024_80.00
EndSubSection
Já to tak mám a je to bez problému.
-
no, tak som to teda vyskusal, doplnil som len ten kusok co mi chybal, tu je ten xorg.conf:
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34 [GeForce FX 5200]"
Monitor "NEW PANDA 17"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1600x1200" "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024_85.00" "1024x768" "832x624" "800x600" "720x400" "640x480"
EndSubSectionpo restarte gnoma sa vobec nic nestalo. Rozlisenie obrazovky si pise jedno a gconf-editor a xorg.conf pisu nieco ine. to bude asi nejaky bug nvidia driveru. ale pokial v xorg.conf ma Petan Kovaru toto:
Section "Monitor"
Identifier "DELL M993s"
Option "DPMS"
# 1280x1024 @ 80.00 Hz (GTF) hsync: 85.76 kHz; pclk: 149.57 MHz
Modeline "1280x1024_80.00" 149.57 1280 1376 1512 1744 1024 1025 1028 1072 -HSync +Vsync
EndSectiontak to beha na 80Hz a teda vsetko ako ma. len si to vypisuje co chce a to sa hadam nejakym updatom driveru vyriesi.
-
Já radím a teď koukám, že mám v rozlišení taky zobrazenou frekvenci 50 Hz :D. A určitě jsem tam ještě nedávno měl 75 Hz(monitor ale běží normálně, jako u Vás). Určitě to bude tím ofic. ovladačem od Nvidie (u mě konkrétně NVIDIA-Linux-x86-1.0-9746-pkg1 ), protože nic jiného jsem za tu dobu neměnil. Ale všechno včetně Berylu šlape, tak to nemá cenu řešit :).
-
Je to chyba v ovladačích, jenom se špatně zobrazují frekvence.
nvidia-settings -q RefreshRate
vypíše frekvenci monitoru
-
Je to paráda děkuju za vaše odpovědi byl jsem z toho zmaten.....:D
-
já se v tom moc nevyznám, ale to rozlišení
# 1280x1024 @ 80.00 Hz (GTF) hsync: 85.76 kHz; pclk: 149.57 MHz Modeline "1280x1024_80.00" 149.57 1280 1376 1512 1744 1je zakomentovaný, není to problém?
-
to sice ano, ale ten riadok pod tym nie.
-
Zrovna jsem na to take koukal a dosel jsem k tomu ze je lepe to naklikat v "sudo nvidia-settings" a pak dat ulozit do /etc/X11/xorg.conf.
-
Ja fakt nechapu, proc v blbym SLAXu jde komfortne nastavit rozliseni i frekvence monitoru prakticky jakekoliv (a jednoduse pres demona v panelu KDE) a v K/ubuntu jsem s tim vzdycky takove "boje"!
Vcera jsem zkousel Kubuntu 7.04 a no a co myslite?
Znechucene jsem to CD zas hodil do zasuvky - moje 1440x900 se mi nepodarilo nastavit ani za boha, i kdyz jsem v Control Centre nastavil "TFT LCD 1440x900" coby typ monitoru. :-(