Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: Stov1k 26 Března 2007, 14:36:16
-
Protoze uz docela dost lidi pouziva Feisty Fawn, rozhodl jsem se taky upgradnou ubuntu z Edgy Elf na nevejsi verzi.
Pomoci programu synaptic jsem spustil upgrade, ale bohuzel se behem upgradu sekl pocitac. Upgrade sem dodelal pomoci aptitude, protoze se nespustily Xka. Zjistil sem, ze Xka nejdou kvuli problemu z grafikou NVidia. Problem je tento:
(EE) Failed to load module "wfb" (module does not exist, 0)
Error API mismatch: the NVIDIA kernel module has the version 1.0-8762,
but this X module has the version 1.0-9746.
Please make sure that the kernel module and all NVIDIA driver components have the some version.
(EE) NVIDIA(0): Failed to initialize the NVIDIA kernel module!
(EE) NVIDIA(0): Please ensure that there is a supported NVIDIA GPU in this system,
(EE) NVIDIA(0): and that the NVIDIA device files have been created properly.
(EE) NVIDIA(0): Please consult the NVIDIA README for details.
(EE) NVIDIA(0): ***Aborting***
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens foundxorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Dec 15 10:12:14 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV34 [GeForce FX 5500]"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV34 [GeForce FX 5500]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSectionXka jsem spustil tak, ze sem dal misto ovladace "nvidia" ovladac "vesa".
Prosil by sem o pomoc z rozchozenim ovladace "nvidia".
-
Mno jednou jsem se s timhle setkal, tak jsem odebral nvidia-glx
sudo apt-get remove nvidia-glxa to vcetne zavislosti a pak jsem znova nainstaloval ten balicek nvidia glx opet se zavislostmi...
nevim kde je chyba, ale potom mi to bezelo... (proste tam zustala spatna verze kernel modulu... a znovunainstalovani asi pomohlo...)
drzim palec... :)
-
Stale to nejde, ale uz se nepise
(EE) Failed to load module "wfb"a zmenilo se toto Error API mismatch: the NVIDIA kernel module has the version 1.0-8762,
but this X module has the version 1.0-9746.na
Error API mismatch: the NVIDIA kernel module has the version 1.0-9755,
but this X module has the version 1.0-9631.
-
Mno nvidia ovladac 9755 se mi aktualizoval dnes... zkus znova odebrat nvidia-glx
pak zadej
sudo apt-get updatea pak ho znova nainstaluj... vice me uz nenapada... :(
-
Ja vzdycky po aktualizaci jadra udelam toto: nabootuju do safe terminalu (mam namysli tu volbu z menu GRUBu), a pak akorat (bez sudo,protoze jsem v root terminalu)
apt-get install --reinstall nvidia-glxa pak restart
-
Problém ja vidím v tom, že Feisty je len beta verzia a v tom čase už bolo k dispozíci nové jadro, ale ešte nie restricted modules. Až dnes sa mi natiahli aj tie spolu s novým nvidia-glx driverom. Ale vyriešiť sa to dalo dočasne tak, že stačilo zmeniť v xorg.conf driver nvidia z nv.
-
Dekuji za pomoc, NVIDIA uz fuguje i z akceleraci v kernelu 2.6.20-13 ve starsich nejde. Ale bohuzel mam s kernelem teto verze problem. Nemohu napsat v Xkach male pismena e, j, n a nefuguje diakrituka. Mohl by mi jeste nekdo prosim poradit stimto problemem?
V kernelu 2.6.15 pismena e, j, n fuguji, ale tam zase nejde akcelerace.
-
Problém ja vidím v tom, že Feisty je len beta verzia a v tom čase už bolo k dispozíci nové jadro, ale ešte nie restricted modules. Až dnes sa mi natiahli aj tie spolu s novým nvidia-glx driverom. Ale vyriešiť sa to dalo dočasne tak, že stačilo zmeniť v xorg.conf driver nvidia z nv.
hmm tak dnes v 22:50 zkousim aktualizaci a restricted modules s novým nvidia-glx driverom zatim nejsou... Cely den jedu na nv.
-
Pocitam,ze balik linux-restricted-modules-generic bude az zejtra.A proc mazete strare jadro kdyz jeste nejde to nove.Ja zatim jedu na stare jadro a az bude linux-restricted-modules-generic, tak prejdu na nove.Takze pocitam zejtra.
-
Mohl by mi nekdo poradit se zprovoznenim klaves e, j, n v Xkach? Nebo aspon rict kam a na co se mam podivat. Ja nevim kde mam hledat problem.
Kdyz dam Caps Lock a pisu, tak Xka opet ignoruji klavesy E, J, N, i kdyz se jedna o velka pismena.
-
zkus
sudo dpkg-reconfigure xserver-xorg
-
Vyzkousel sem to a stale bohuzel nejde. Myslim, ze neni problem v souboru xorg.conf, uz driv jsem zkousel tam dat xorg.conf z Dappera (To je asi xorg 7.0) a taky tyto pismena nesli.
xorg.conf ted vypada takto:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "nVidia Corporation NV34 [GeForce FX 5500]"
Driver "nvidia"
BusID "PCI:1:0:0"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Obecný monitor"
Option "DPMS"
HorizSync 30-57
VertRefresh 47-150
EndSection
Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV34 [GeForce FX 5500]"
Monitor "Obecný monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
-
Toto:
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
Option "XkbOptions" "lv3:ralt_switch"
EndSectionbych udělal takto:Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz,us"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
-
Bohuzel taky nepomohlo. Muze to byt problem kernelu? Mam upravenej soubor /boot/grub/menu.lst, kvuli tomu, ze u novejsich kerneluch od verze 2.6.17 mi to hlasilo kernel panic.
Pouzivane menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.20-13-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-13-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro quiet splash
initrd /boot/initrd.img-2.6.20-13-386
savedefault
title Ubuntu, kernel 2.6.20-13-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-13-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro single
initrd /boot/initrd.img-2.6.20-13-386
title Ubuntu, kernel 2.6.20-12-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-12-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro quiet splash
initrd /boot/initrd.img-2.6.20-12-386
savedefault
title Ubuntu, kernel 2.6.20-12-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-12-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro single
initrd /boot/initrd.img-2.6.20-12-386
title Ubuntu, kernel 2.6.17-11-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.17-11-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro quiet splash
initrd /boot/initrd.img-2.6.17-11-386
savedefault
title Ubuntu, kernel 2.6.17-11-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.17-11-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro single
initrd /boot/initrd.img-2.6.17-11-386
title Ubuntu, kernel 2.6.15-23-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.15-23-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro quiet splash
initrd /boot/initrd.img-2.6.15-23-386
savedefault
title Ubuntu, kernel 2.6.15-23-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.15-23-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro single
initrd /boot/initrd.img-2.6.15-23-386
title Ubuntu, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LISTstare menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro
## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## ## End Default Options ##
title Ubuntu, kernel 2.6.20-12-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-12-386 init=/bin/bash root=/dev/hda1 #root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro quiet splash
initrd /boot/initrd.img-2.6.20-12-386
savedefault
title Ubuntu, kernel 2.6.20-12-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.20-12-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro single
initrd /boot/initrd.img-2.6.20-12-386
title Ubuntu, kernel 2.6.17-11-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.17-11-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro quiet splash
initrd /boot/initrd.img-2.6.17-11-386
savedefault
title Ubuntu, kernel 2.6.17-11-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.17-11-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro single
initrd /boot/initrd.img-2.6.17-11-386
title Ubuntu, kernel 2.6.15-23-386
root (hd0,0)
kernel /boot/vmlinuz-2.6.15-23-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro quiet splash
initrd /boot/initrd.img-2.6.15-23-386
savedefault
title Ubuntu, kernel 2.6.15-23-386 (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.15-23-386 root=UUID=977924e8-08dc-4026-bcf6-7f2653df2867 ro single
initrd /boot/initrd.img-2.6.15-23-386
title Ubuntu, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
-
a nezůstal v /etc/rc2.d starý init script? skus update-rc.d nvidia-glx remove & update-rc.d nvidia-glx remove
a přeinstaluj nvidia-glx
-
Klavesy e, j, n uz mi funguji, vyresil jsem to upgradem na xorg 7.2.
-
Zdravim, vcera som si nainstaloval Ubuntu 7.04, nova instalacia nie upgrade, a mam problem s grafikou. Dost ma prekvapila polozka v System / Sprava - Restricted drivers manager. Hned po instalacii mi vypisal ze mam NVIDIU a odskrtavacie policka na Povolenie a Pouzitie. To by bolo celkom fajn, dobre smerovanie Ubuntu. Ale este pred tym ako som si dal instalovat grafiku tak som urobil aktualizacie. No a tu zacina moj problem. Po aktualizacii mi Restricted drivers manager vypisuje hlasku "Your hardware does not need any restricted drivers." A to mam grafiku NVIDIA GeForce 4 440 GO. Tak som dal rucne instalovat nvidia-glx, potom som nakonfiguroval Xserver, ale po restarte mi nenabehnu Xka. Takze zatial bezim na NV driveri, a to nie je bohvie co.
EDIT:
Teraz som skusil preinstalovat nanovo a hned po instalacii som spustil Restricted drivers manager a v nom povolil gafiku. Bohuzial vysledok ten isty, Xka nenabehnu :(
-
No nasiel som na nete, ze ma viac ludi podobny problem, ale nikde nebolo ziadne riesenie. Skusal som nainstalovat drivery z nvidie, ale tam mi hadzalo chybu ze nemoze najst subor nvidia.ko
Este pre uprsesnenie problemu, pri starte mi vypie chybu xservera:
No devices detected
Fatal server error: no screens found
-
taky mi to píše, jak v jádru 20-13 tak i 20-14... jde mi jen ovladač nv
-
taky mi to nejede, mam GF4 MX440...
-
sakra, neví někdo, jak to rozchodit? zkoušel jsem reinstall nvidia-glx-legacy i restricted modulů a začlo mi najíždět logo nvidia, ale pak hadr a restartovalo se to dokola.... a ovladač nv mě už nebaví :(
-
Dnes som si nahodil Feisty aj na desktop, kde mam GF6200 a tam mi vsetko beha OK. Tak uz fakt neviem co s tym...
-
Mne to tiež nejde:(. Po upgrade na feisty fawn mi to išlo, ale chcel som dať nový ovladač a odvtedy nejde:(.