Fórum Ubuntu CZ/SK
Ostatní => Archiv => Téma založeno: hovEdo 05 Dubna 2007, 19:20:51
-
ahoj, som v KUbuntu novacik, pred tym som skusal ine distra, ale nikdy som sa tak netrapil so sietovkou:-(
Mam notas Hp nc6000, bezdrat/chit poslucha na Atheros, preto som zvolil madwifi, ale nejde:-(
mam problem s nastavenim sifrovania, ak router nastavim len na blokovanie MAC adresy, pripjim sa v pohode. Ked tam dam i sifrovanie, nepripojim sa nikdy.
Skusal som Knoppix, islo bez problemov...
Nechapem, co sa deje, ze v Kubuntu mi to nejde ani zaboha..
Dalsia vec, Kwlan v Kubuntu sa mi sprava inak: V Knoppixe si zvolim driver a potom si spistim wpa_supplicant, vyhladam siete a ku pripojenie este zadam pump -i ath0-bez toho mi neprideli adresu dhcp. V Kubuntu mi vsak pump nie je nic platne, nepozna ho, a tak radsej pouzivam wlassitant..
vie mi niekto poradit co s tym pls..?
#lsmod
ath_pci 100384 0
ath_rate_sample 19072 1 ath_pci
wlan 201404 5 wlan_tkip,wlan_scan_sta,ath_pci,ath_rate_sample
ath_hal 195920 3 ath_pci,ath_rate_sample
#iwconfig ath0
ath0 IEEE 802.11g ESSID:"smcnetwork" Nickname:""
Mode:Managed Frequency:2.462 GHz Access Point: 00:13:F7:1E:8D:FD
Bit Rate:54 Mb/s Tx-Power:15 dBm Sensitivity=0/3
Retry:off RTS thr:off Fragment thr:off
Encryption key:8E7C-7C04-A39D-6A54-722C-C87E-79DE-7A2F Security mode:restricted
Power Management:off
Link Quality=41/94 Signal level=-51 dBm Noise level=-92 dBm
Rx invalid nwid:937 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
#sudo wlassistant
wifi0: unknown hardware address type 801
Listening on LPF/ath0/00:0f:20:94:f4:3f
Sending on LPF/ath0/00:0f:20:94:f4:3f
Sending on Socket/fallback
DHCPRELEASE on ath0 to 192.168.2.1 port 67
send_packet: Network is unreachable
send_packet: please consult README file regarding broadcast address.
ifup: /sbin/ifconfig ath0 up
iwconfig_set: /sbin/iwconfig ath0 mode managed channel 11 key restricted ae01c9e93f1b4a8852fcaa0217645fe0c0dc57849a7456b6a32bf579987ecd5c essid smcnetwork
==>stderr: Error for wireless request "Set Encode" (8B2A) :
SET failed on device ath0 ; Invalid argument.
iwconfig_ap: /sbin/iwconfig ath0 ap 00:13:F7:1E:8D:FD
ifconfig_dhcp: /sbin/dhclient -q ath0
==>stderr: There is already a pid file /var/run/dhclient.pid with pid 134993416
kill_dhcp: /sbin/dhclient -r ath0
==>stderr: There is already a pid file /var/run/dhclient.pid with pid 134993416
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
#/etc/network/interfaces
auto ath0
iface ath0 inet dhcp
wpa-driver madwifi
wpa-conf managed
wpa-ssid smcnetwork
wpa-ap-scan 1
wpa-proto WPA RSN
wpa-pairwise TKIP CCMP
wpa-group TKIP
wpa-key-mgmt WPA-PSK
wpa-psk MOJE_HESLO_SIFROVANE
#auto ath0
#iface ath0 inet dhcp
#wireless-mode managed
#wireless-essid smcnetwork
#pre-up wpa_supplicant -Dmadwifi -iath0 -c/etc/wpa_supplicant.conf -Bw
#post-down killall -q wpa_supplicant
#/etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="smcnetwork"
scan_ssid=1
proto=WPA
pairwise=TKIP
group=TKIP
key_mgmt=WPA-PSK
psk=MOJE_HESLO_SIFROVANE
}
-
zdar, pre pripadnych pacientov s podobnym postihnutim, ako som mal ja, mam riesenie:
-> pre ath0
#/etc/network/interfaces
auto ath0
iface ath0 inet dhcp
pre-up sleep 10
+odkaz na wpa_supplicant.conf#/etc/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="smcnetwork"
scan_ssid=1
proto=WPA
pairwise=TKIP
group=TKIP
key_mgmt=WPA-PSK
psk=MOJE_HESLO_SIFROVANE
}teraz to frci jedna basen:-D
-
nedávno jsem s madwifi měl taky malý problém na serveru po upgrade ubuntu z 6.10 na 7.04, ale pomohly návody na www.madwifi.net