Fórum Ubuntu CZ/SK

Ubuntu pro osobní počítače => Obecná podpora => Téma založeno: crowack 25 Dubna 2008, 21:07:08

Název: Obraz na Acer Extensa 5620G - "duchy" (v.8.04) (vyřešeno)
Přispěvatel: crowack 25 Dubna 2008, 21:07:08
Ahoj.
Právě jsem nainstaloval novou verzi ubuntu (předtím jsem jel na openSUSE) a mám menší problém s obrazovkou. Rozlišení běží na 1280x800 60Hz, za což pochvala, ale obraz se třese , jdou přes něj "duchy" přechází přes něj pruhy...taková distortion trochu, nevím přesně jak to popsat, snad jsem se vyjádřil přesně...nedá se to zachytit snímkem obrazovky, ten je bez chyb.
prosím o pomoc, nemám na "hraní" si a ladění moc času - zkouškové...
tady moje HW konfigurace:
Acer Extensa 5620G - 1A1G16Mi
Centrino Duo (santa rosa)
ATI Radeon HD 2400 XT
1GB RAM
Displej 1280x800
přepnutí na proprietární driver GK nemá na funkci vliv

Díky za rady...
Název: Re: Obraz na Acer Extensa 5620G - "duchy" (v.8.04)
Přispěvatel: crowack 25 Dubna 2008, 21:24:56
ještě mě napadlo:
lspci:
Kód: [Vybrat]
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon HD 2400 XT
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
04:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
0f:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0f:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
0f:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0f:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
cat /etc/usplash.conf
Kód: [Vybrat]
# Usplash configuration file
# These parameters will only apply after running update-initramfs.

xres=1280
yres=800
a /etc/X11/xorg.conf
Kód: [Vybrat]
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
Díky :)
Název: Re: Obraz na Acer Extensa 5620G - "duchy" (v.8.04)
Přispěvatel: crowack 26 Dubna 2008, 12:20:18
Tak jsem na druhý pokus spustil nesvobodný ovladač ati a vše je ok. Včera se asi nemohl stáhnout kvůli přetížení serveru (všichni tahali 8.04 jako o život) a já si toho díky tomu "super" efektu nevšiml. Nicméně pokud by měl někdo podobný problém, je to zde :).