Fórum Ubuntu CZ/SK
Ubuntu pro osobní počítače => Hardware => Téma založeno: Dave11 05 Května 2009, 01:30:41
-
Ahoj, prosim nekoho, kdo by me pomohl zprovoznit TV kartu Pinnacle 330e na Ubuntu 9.04. Zkousel jsem to podle navodu na http://mcentral.de/wiki/index.php5/Installation_Guide , ale bohuzel neuspesne, s linuxem nemam zatim moc zkusenosti, pokud by se me podarilo rozchodit tu kartu, bylo by o moc snadnejsi prejit na linux uplne. Pokud nekdo mate tuto kartu, dejte prosim vedet. Diky, Dave
-
a kde vám to podle toho postupu píše chybu?
-
Zacina to u kroku 7 :
dave@dave-laptop:~$ sudo cp --verbose /boot/config-$(uname -r) /usr/src/linux/.config
`/boot/config-2.6.28-11-generic' -> `/usr/src/linux/.config'
cp: cannot create regular file `/usr/src/linux/.config': No such file or directory
U kroku 8 jsou jen tyto soubory:
dave@dave-laptop:~$ ls -hal /usr/src
total 55M
drwxrwsr-x 5 root src 4.0K 2009-05-05 08:13 .
drwxr-xr-x 11 root root 4.0K 2009-04-20 15:00 ..
lrwxrwxrwx 1 root src 28 2009-05-05 08:13 linu -> /usr/src/linux-source-2.6.26
drwxr-xr-x 22 root root 4.0K 2009-05-03 09:11 linux-headers-2.6.28-11
drwxr-xr-x 7 root root 4.0K 2009-05-03 09:11 linux-headers-2.6.28-11-generic
drwxr-xr-x 25 root root 4.0K 2009-04-17 04:39 linux-source-2.6.28
-rw-r--r-- 1 root root 55M 2009-04-17 04:41 linux-source-2.6.28.tar.bz2
A u kroku 9 me to u tech modulu pise:
dave@dave-laptop:~$ sudo ls -hal /lib/modules/$(uname -r)/source/drivers/media/dvb/dvb-core/dmxdev.h
ls: cannot access /lib/modules/2.6.28-11-generic/source/drivers/media/dvb/dvb-core/dmxdev.h: No such file or directory
ten adresar source neexistuje
A u tech dalsich:
dave@dave-laptop:/lib/modules$ sudo ls -hal /usr/src/linux/drivers/media/dvb/dvb-core/dmxdev.h
ls: cannot access /usr/src/linux/drivers/media/dvb/dvb-core/dmxdev.h: No such file or directory
dave@dave-laptop:/lib/modules$
ten adresar linux neexistuje, jsou tam
dave@dave-laptop:/usr/src$ ls
linu linux-source-2.6.28
linux-headers-2.6.28-11 linux-source-2.6.28.tar.bz2
linux-headers-2.6.28-11-generic
-
tipnul bych si že v bodu 6. vám uteklo písmenko x...
-
Jo, to je pravda, to uz jsem napravil, ale ten problem to nevyresilo, vse je porad stejne, vsechny ty chyby
dave@dave-laptop:~$ ls /usr/src/
linux linux-source-2.6.28
linux-headers-2.6.28-11 linux-source-2.6.28.tar.bz2
linux-headers-2.6.28-11-generic
dave@dave-laptop:~$ sudo cp --verbose /boot/config-$(uname -r) /usr/src/linux/.config
`/boot/config-2.6.28-11-generic' -> `/usr/src/linux/.config'
cp: cannot create regular file `/usr/src/linux/.config': No such file or directory
dave@dave-laptop:~$ sudo ls -hal /usr/src/linux/drivers/media/dvb/dvb-core/dmxdev.h
ls: cannot access /usr/src/linux/drivers/media/dvb/dvb-core/dmxdev.h: No such file or directory
dave@dave-laptop:~$ sudo ls -hal /lib/modules/$(uname -r)/source/drivers/media/dvb/dvb-core/dmxdev.h
ls: cannot access /lib/modules/2.6.28-11-generic/source/drivers/media/dvb/dvb-core/dmxdev.h: No such file or directory
-
ukažte
ls -laF /usr/src
jestli linux máte linkovaný do /usr/src/linux-source-2.6.28
nebo jste si nepřečetl poznámku u bodu 6 # change the kernel to its current version!
a jen jste jej opsal
pokud jen opsal, tak pokračujte bodem 5.
-
Dekuji, instalace uspesne dokoncena. Jaky program s GUI bych mohl pouzit pro skenovani stanic? Momentalne jsem v Anglii, tak bych uvital, abych si mohl primo vybrat, kde se nachazim.....
-
Nevím, já raději terminál, ale podívejte se na wiki: http://wiki.ubuntu.cz/Televize
-
Tak nevim, co delam zase spatne, pri pokusu o skenovani tato hlaska:
dave@dave-laptop:~$ scan /usr/share/dvb/dvb-t/uk-Lancaster > ~/.tzap/channels.conf
scanning /usr/share/dvb/dvb-t/uk-Lancaster
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2273: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
-
ukažte
dmesg
lsusb
A teď koukám že instalace vaší karty je popsána i na wiki (http://wiki.ubuntu.cz/Pinnacle%20PCTV%20Hybrid%20Pro%20Stick)
-
dave@dave-laptop:~$ lsusb
Bus 001 Device 004: ID 2304:0226 Pinnacle Systems, Inc. [hex] PCTV 330e
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root h
Toto je kousek z dmesg:
ut11
[ 405.272052] em28xx-input.c: remote control handler attached
[ 405.272063] em28xx #0: Found Pinnacle Hybrid Pro (em2882)
[ 405.272116] usbcore: registered new interface driver em28xx
[ 405.376106] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 405.376116] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 405.376823] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 405.522857] em2880-dvb.c: DVB Init
[ 405.623025] Em28xx: Initialized (Em2880 DVB Extension) extension
[ 405.997837] opening radio device and trying to acquire exclusive lock
[ 405.997852] switching device to FM mode
[ 406.098102] NULL PTR
[ 406.160547] tvp5150 1-005c: tvp5150am1 detected.
[ 406.263562] retrieved mode from tuner: 1
[ 406.264397] changing alternate number to 7
[ 1090.558512] usb 1-1: USB disconnect, address 3
[ 1090.573976] em28xx #0: reading key failed (error=-19=-ENODEV)
[ 1090.579331] em28xx-input.c: remote control handler detached
[ 1090.579342] audio: deinitializing audio device
[ 1090.579348] audio: before waitstream
[ 1090.579352] audio: after waitstream
[ 1090.579356] audio: waiting for audioclients to release audio node
[ 1090.579885] em28xx #0: disconnecting em28xx#0 video
[ 1090.579891] em28xx #0: V4L2 VIDEO devices /dev/video0 deregistered
[ 1090.579975] em28xx #0: V4L2 VBI devices /dev/vbi0 deregistered
[ 3140.684080] usb 1-1: new high speed USB device using ehci_hcd and address 4
[ 3140.832087] usb 1-1: configuration #1 chosen from 1 choice
[ 3140.832377] em28xx: new video device (2304:0226): interface 0, class 255
[ 3140.832384] em28xx: device is attached to a USB 2.0 bus
[ 3140.832392] em28xx #0: Alternate settings: 8
[ 3140.832398] em28xx #0: Alternate setting 0, max size= 0
[ 3140.832403] em28xx #0: Alternate setting 1, max size= 0
[ 3140.832408] em28xx #0: Alternate setting 2, max size= 1448
[ 3140.832414] em28xx #0: Alternate setting 3, max size= 2048
[ 3140.832419] em28xx #0: Alternate setting 4, max size= 2304
[ 3140.832424] em28xx #0: Alternate setting 5, max size= 2580
[ 3140.832430] em28xx #0: Alternate setting 6, max size= 2892
[ 3140.832435] em28xx #0: Alternate setting 7, max size= 3072
[ 3141.388475] attach_inform: tvp5150 detected.
[ 3141.452531] tvp5150 1-005c: tvp5150am1 detected.
[ 3143.064870] successfully attached tuner
[ 3143.069315] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[ 3143.088121] em28xx #0: V4L2 device registered as /dev/video0
[ 3143.088131] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 3143.088137] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 3143.091091] em2880-dvb.c: DVB Init
[ 3143.192786] input: em2880/em2870 remote control as /devices/virtual/input/input12
[ 3143.210450] em28xx-input.c: remote control handler attached
[ 3143.210463] em28xx #0: Found Pinnacle Hybrid Pro (em2882)
[ 3143.837849] opening radio device and trying to acquire exclusive lock
[ 3143.837862] switching device to FM mode
[ 3143.938048] NULL PTR
[ 3144.000499] tvp5150 1-005c: tvp5150am1 detected.
[ 3144.103514] retrieved mode from tuner: 1
[ 3144.108191] changing alternate number to 7
[ 3812.690889] tg3: eth0: Link is down.
[ 3814.278655] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 3814.278665] tg3: eth0: Flow control is on for TX and on for RX.
[ 3816.633579] tg3: eth0: Link is down.
[ 3818.221455] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 3818.221466] tg3: eth0: Flow control is on for TX and on for RX.
Kdyz spustim Me TV, tak dostanu hlasku, ze:
There are no available DVB tuner devices.
A Kaffeine me pise:
Can't bind info socket
-
Tak uz jsem to konecne rozbehal, kdyz by mel nekdo stejnej problem, zde je navod:
http://ubuntuforums.org/archive/index.php/t-112800.html
A diky kiklhorn za pomoc se sprovoznenim karty.