Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Zobrazit příspěvky

Tato sekce Vám umožňuje zobrazit všechny příspěvky tohoto uživatele. Prosím uvědomte si, že můžete vidět příspěvky pouze z oblastí Vám přístupných.


Příspěvky - haid

Stran: [1] 2
1
takže je to tak, že budu čekat až to nějaký update vyřeší.  ano?

2
Rovano a GdH díky za vedení. Upravil jsem grub, spustil update grubu, ale stále bohužel nic.

Jde o toto?: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1069031

3
tak jestli přidávám nomodeset na správné místo, tak to nezabralo.
přidal jsem to k "linux /boot/vmlinuz...."  mezi "ro"  a "quiet"

4
Zdravím,

postupně:
lspci vyhodilo
Kód: [Vybrat]
00:00.0 Host bridge: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
02:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)

lspci | grep VGA
Kód: [Vybrat]
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09)

Xorg.0.log
Kód: [Vybrat]
[    15.642]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[    15.642] X Protocol Version 11, Revision 0
[    15.642] Build Operating System: Linux 3.2.0-30-generic x86_64 Ubuntu
[    15.642] Current Operating System: Linux TPBoetheia001 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64
[    15.642] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=b544218a-d436-4c2c-8c1a-d92c5339456e ro quiet splash
[    15.642] Build Date: 08 October 2012  03:34:01PM
[    15.642] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[    15.642] Current version of pixman: 0.26.0
[    15.642] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    15.642] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.643] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 22 14:24:57 2012
[    15.952] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.952] (==) No Layout section.  Using the first Screen section.
[    15.952] (==) No screen section available. Using defaults.
[    15.952] (**) |-->Screen "Default Screen Section" (0)
[    15.952] (**) |   |-->Monitor "<default monitor>"
[    15.953] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    15.953] (==) Automatically adding devices
[    15.953] (==) Automatically enabling devices
[    15.953] (==) Automatically adding GPU devices
[    15.953] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.953] Entry deleted from font path.
[    16.077] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    16.077] Entry deleted from font path.
[    16.106] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    16.106] Entry deleted from font path.
[    16.106] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    16.106] Entry deleted from font path.
[    16.106] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
[    16.106] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    16.106] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    16.106] (II) Loader magic: 0x7ff3a46abc40
[    16.106] (II) Module ABI versions:
[    16.106] X.Org ANSI C Emulation: 0.4
[    16.106] X.Org Video Driver: 13.0
[    16.106] X.Org XInput driver : 18.0
[    16.106] X.Org Server Extension : 7.0
[    16.107] (II) config/udev: Adding drm device (/dev/dri/card0)
[    16.111] (--) PCI:*(0:0:2:0) 8086:0be2:1025:061f rev 9, Mem @ 0x46000000/1048576, I/O @ 0x000050d0/8
[    16.111] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    16.112] Initializing built-in extension Generic Event Extension
[    16.112] Initializing built-in extension SHAPE
[    16.112] Initializing built-in extension MIT-SHM
[    16.112] Initializing built-in extension XInputExtension
[    16.112] Initializing built-in extension XTEST
[    16.112] Initializing built-in extension BIG-REQUESTS
[    16.112] Initializing built-in extension SYNC
[    16.112] Initializing built-in extension XKEYBOARD
[    16.112] Initializing built-in extension XC-MISC
[    16.112] Initializing built-in extension SECURITY
[    16.112] Initializing built-in extension XINERAMA
[    16.112] Initializing built-in extension XFIXES
[    16.112] Initializing built-in extension RENDER
[    16.112] Initializing built-in extension RANDR
[    16.112] Initializing built-in extension COMPOSITE
[    16.112] Initializing built-in extension DAMAGE
[    16.112] Initializing built-in extension MIT-SCREEN-SAVER
[    16.112] Initializing built-in extension DOUBLE-BUFFER
[    16.112] Initializing built-in extension RECORD
[    16.112] Initializing built-in extension DPMS
[    16.112] Initializing built-in extension X-Resource
[    16.113] Initializing built-in extension XVideo
[    16.113] Initializing built-in extension XVideo-MotionCompensation
[    16.113] Initializing built-in extension XFree86-VidModeExtension
[    16.113] Initializing built-in extension XFree86-DGA
[    16.113] Initializing built-in extension XFree86-DRI
[    16.113] Initializing built-in extension DRI2
[    16.113] (II) LoadModule: "glx"
[    16.195] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.196] (II) Module glx: vendor="X.Org Foundation"
[    16.196] compiled for 1.13.0, module version = 1.0.0
[    16.196] ABI class: X.Org Server Extension, version 7.0
[    16.196] (==) AIGLX enabled
[    16.196] Loading extension GLX
[    16.196] (==) Matched intel as autoconfigured driver 0
[    16.196] (==) Matched intel as autoconfigured driver 1
[    16.196] (==) Matched vesa as autoconfigured driver 2
[    16.196] (==) Matched modesetting as autoconfigured driver 3
[    16.196] (==) Matched fbdev as autoconfigured driver 4
[    16.196] (==) Assigned the driver to the xf86ConfigLayout
[    16.196] (II) LoadModule: "intel"
[    16.197] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    16.197] (II) Module intel: vendor="X.Org Foundation"
[    16.197] compiled for 1.13.0, module version = 2.20.9
[    16.197] Module class: X.Org Video Driver
[    16.197] ABI class: X.Org Video Driver, version 13.0
[    16.197] (II) LoadModule: "vesa"
[    16.198] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    16.198] (II) Module vesa: vendor="X.Org Foundation"
[    16.198] compiled for 1.12.99.902, module version = 2.3.2
[    16.198] Module class: X.Org Video Driver
[    16.198] ABI class: X.Org Video Driver, version 13.0
[    16.198] (II) LoadModule: "modesetting"
[    16.199] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    16.199] (II) Module modesetting: vendor="X.Org Foundation"
[    16.199] compiled for 1.13.0, module version = 0.5.0
[    16.199] Module class: X.Org Video Driver
[    16.199] ABI class: X.Org Video Driver, version 13.0
[    16.199] (II) LoadModule: "fbdev"
[    16.199] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    16.200] (II) Module fbdev: vendor="X.Org Foundation"
[    16.200] compiled for 1.12.99.902, module version = 0.4.3
[    16.200] Module class: X.Org Video Driver
[    16.200] ABI class: X.Org Video Driver, version 13.0
[    16.200] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
Haswell Server (GT2+), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
ValleyView PO board
[    16.202] (II) VESA: driver for VESA chipsets: vesa
[    16.202] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    16.202] (II) FBDEV: driver for framebuffer: fbdev
[    16.202] (++) using VT number 7

[    16.202] (II) intel(0): using device path '/dev/dri/card0'
[    16.202] (WW) Falling back to old probe method for vesa
[    16.202] (WW) Falling back to old probe method for modesetting
[    16.203] (WW) Falling back to old probe method for fbdev
[    16.203] (II) Loading sub module "fbdevhw"
[    16.203] (II) LoadModule: "fbdevhw"
[    16.203] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    16.203] (II) Module fbdevhw: vendor="X.Org Foundation"
[    16.203] compiled for 1.13.0, module version = 0.0.2
[    16.204] ABI class: X.Org Video Driver, version 13.0
[    16.204] (EE) intel(0): [drm] Failed to detect GEM.  Kernel 2.6.28 required.
[    16.204] (EE) intel(0): Failed to become DRM master.
[    16.204] (II) UnloadModule: "intel"
[    16.204] (EE) Screen(s) found, but none have a usable configuration.
[    16.204]
Fatal server error:
[    16.204] no screens found
[    16.204] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
 for help.
[    16.204] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    16.204] (EE)
[    16.211] Server terminated with error (1). Closing log file.

spustit x server se mi nepovedlo. vždy se to seklo na lightdm start ->
Kód: [Vybrat]
CPU interrupts balacing daemon

5
Dobrý den,

mám podobný problém na stejném stroji. Aktualizace proběhla, nicméně x-ka nenaběhly. Mohu se normálně přihlásit, pracovat v řádce, připojit se k síti atd.
Přes zkoumání různých fór (přes - nebo možná pro - mizernou angličtinu) jsem nic nenašel žádné řešení.
Prozatím jsem vedle 12.10 nainstaloval znovu 12.04.

Díky za případnou pomoc

6
myslíš, že by pomohlo přejít na jádro 2.6.30, nebo mám čekat na ubuntu 9.10?

7
hry z linuxu fungují jak mají, compiz též. Šťourám se v tom, protože správná odpověď na Direct rendering má být: Yes :)
navíc mi nejedou některé oblíbené hry pod wine a tady jsem čul problém.

mimochodem, když máš stejný stroj, prosím testni to též. (sudo glxinfo | grep direct + glxinfo | grep direct)
Díky

8
http://wiki.cchtml.com/index.php/Main_Page

tak už se mi to podařilo otevřít, ale jsem na rozpacích. Jak aplikovat poznatky z ATI na Intel?

9
Notebooky a přenosné počítače / Re: HP6730s direct rendering: No
« kdy: 24 Července 2009, 14:31:36 »
Díky moc za snahu,
ta stránka se mi odmítá byť jen načíst. Už na to kašlu.

10
Notebooky a přenosné počítače / Re: HP6730s direct rendering: No
« kdy: 27 Června 2009, 01:22:23 »
v celé komunitě nemá nikdo žádný nápad  ???  :'(

prosím...

11
Notebooky a přenosné počítače / Re: HP6730s direct rendering: No
« kdy: 24 Června 2009, 22:35:36 »
takže ve skupině video jsem

Kód: [Vybrat]
haid@haid-laptop:~$ groups haid
haid adm dialout cdrom audio video plugdev lpadmin admin sambashare

výpis /dev pro video
Kód: [Vybrat]
haid@haid-laptop:/etc$ find /dev -gid 44
/dev/dri/card0
/dev/video0
/dev/agpgart

root je pouze ve skupině "root"
když jsem drze přidal k uživateli haid skupinu root, stějně direct rendering odpovídá: no  :-[

nějaký další nápad?

12
Notebooky a přenosné počítače / Re: HP6730s direct rendering: No
« kdy: 24 Června 2009, 21:46:01 »
návodu na archlinuxu bohužel vůbec nerozumím, takže tudy to nepůjde  :-[

ještě jsem zjistil, že když zadám
Kód: [Vybrat]
sudo glxinfo | grep direct
 

pak je odpověď "Yes"

prosím, nějaký další nápad?

13
Notebooky a přenosné počítače / Re: HP6730s direct rendering: No
« kdy: 24 Června 2009, 17:30:24 »
Zkus vyzkoušet řešení z tohoto odkazu
http://bbs.archlinux.org/viewtopic.php?id=39711

Děkuji, moje angličtina, ni znalosti linuxu nejsou nijak úžasné, ale pokusím se vydat touto cestou.

14
Notebooky a přenosné počítače / Re: HP6730s direct rendering: No
« kdy: 24 Června 2009, 17:22:09 »
:D dyk ti to pise ::

direct rendering: No (LIBGL_ALWAYS_INDIRECT set)

zkus schvalne `LIBGL_ALWAYS_INDIRECT=0 glxinfo | grep ^direct

no jó, ale to bych tomu musel rozumět  ???  ;)

`LIBGL_ALWAYS_INDIRECT=0 glxinfo | grep ^direct

je odpověď
Kód: [Vybrat]
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)

15
Notebooky a přenosné počítače / HP6730s direct rendering: No
« kdy: 24 Června 2009, 12:23:05 »
Prosím o pomoc se zprovozněním 3D akcelerace

grafická karta
Kód: [Vybrat]
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

xorg.conf
Kód: [Vybrat]
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection

glxinfo:
Kód: [Vybrat]
name of display: :0.0
display: :0  screen: 0
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
    GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
    GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
    GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
    GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
    GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group,
    GLX_EXT_texture_from_pixmap
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset GEM 20090326 2009Q1 RC2 x86/MMX/SSE2
OpenGL version string: 1.4 (2.0 Mesa 7.4)
OpenGL extensions:
    GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
    GL_ARB_fragment_program_shadow, GL_ARB_multisample, GL_ARB_multitexture,
    GL_ARB_occlusion_query, GL_ARB_point_parameters, GL_ARB_point_sprite,
    GL_ARB_shadow, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
    GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
    GL_ARB_transpose_matrix, GL_ARB_vertex_program, GL_ARB_window_pos,
    GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
    GL_EXT_clip_volume_hint, GL_EXT_copy_texture, GL_EXT_draw_range_elements,
    GL_EXT_fog_coord, GL_EXT_framebuffer_object, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
    GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
    GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
    GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_vertex_array,
    GL_3DFX_texture_compression_FXT1, GL_APPLE_packed_pixels,
    GL_ATI_draw_buffers, GL_ATI_texture_env_combine3,
    GL_ATIX_texture_env_combine3, GL_IBM_texture_mirrored_repeat,
    GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
    GL_NV_blend_square, GL_NV_light_max_exponent, GL_NV_point_sprite,
    GL_NV_texgen_reflection, GL_NV_texture_rectangle, GL_NV_vertex_program,
    GL_NV_vertex_program1_1, GL_SGIS_generate_mipmap,
    GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
    GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SUN_multi_draw_arrays

36 GLX Visuals
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x21 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x22 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x79 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x7a 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x7b 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x7c 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x7d 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x7e 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x7f 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x80 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x81 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x82 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x83 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x84 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x85 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x86 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x87 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x88 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x89 24 dc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x8a 24 dc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x8b 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x8c 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x8d 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x8e 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x8f 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x90 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x91 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x92 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x93 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x94 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x95 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x96 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x97 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x98 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x99 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x54 32 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None

36 GLXFBConfigs:
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x55  0 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x56  0 tc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x57  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x58  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x59  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x5a  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x5b  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x5c  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x5d  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x5e  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x5f  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x60  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x61  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x62  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x63  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x64  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x65  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x66  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x67  0 dc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x68  0 dc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x69  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x6a  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x6b  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x6c  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x6d  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x6e  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x6f  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x70  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x71  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x72  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x73  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x74  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x75  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x76  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x77  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x78  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow


cat /var/log/Xorg.0.log
Kód: [Vybrat]
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux haid-laptop 2.6.28-13-generic #44-Ubuntu SMP Tue Jun 2 07:57:31 UTC 2009 i686
Build Date: 09 April 2009  02:10:02AM
xorg-server 2:1.6.0-0ubuntu14 (buildd@rothera.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 24 11:49:43 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0x98000000/4194304, 0x80000000/268435456, I/O @ 0x000070f0/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x98000000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 65532 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0xa1000000 to 0x4c004200
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 475136 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1900540 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0x98000000
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): Disable render standby.
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00063fff: compressed frame buffer (400 kB, 0x000000007c000000 physical
)
(II) intel(0): 0x00064000-0x01323fff: exa offscreen (19200 kB)
(II) intel(0): 0x01324000-0x01324fff: power context (4 kB)
(II) intel(0): 0x03fff000:            end of stolen memory
(II) intel(0): 0x03fff000-0x0e4befff: DRI memory manager (168704 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x03fff000:            start of memory manager
(II) intel(0): 0x04020000-0x0465ffff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x04820000-0x04e5ffff: back buffer (6400 kB) X tiled
(II) intel(0): 0x05020000-0x0565ffff: front buffer (6400 kB) X tiled
(II) intel(0): 0x05820000-0x05829fff: HW cursors (40 kB)
(II) intel(0): 0x0e4bf000:            end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0): [drm] mapped front buffer at 0x85020000, handle = 0x85020000
(II) intel(0): [drm] mapped back buffer at 0x84820000, handle = 0x84820000
(II) intel(0): [drm] mapped depth buffer at 0x84020000, handle = 0x84020000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "cz"
(**) AT Translated Set 2 keyboard: xkb_layout: "cz"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "cz"
(**) Video Bus: xkb_layout: "cz"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event3"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event9"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): EDID vendor "CMO", prod id 5459
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
(II) intel(0): EDID vendor "CMO", prod id 5459

no a výsledek
Kód: [Vybrat]
direct rendering: No (LIBGL_ALWAYS_INDIRECT set)
:(

V LiveCD šlapala

Díky za pomoc

16
a na disku máš tedy místa dost? máš 2 disky (oddíly) pro / a /home?  Dělalo mi to něco podobného v FF, tak jsem promazal /home a šlo to, jak má.

17
tak bych se nejraději vyliskal. přišel jsem na to, že se snažím nastavit časovou zónu v kalendáři orage a ne tam, kde mám. tedy v:systém-datum a čas.
no i to se bohužel stává. děkuji ale za pomoc

18
díky, provedl jsem, ale výsledek není dobrý.
hodiny v biosu jsem nastavil a nejdřív mi mé xubuntu ukazovalo +1hod a po restartu nastavilo -1hod.

tož tak

19
Od přechodu na letní čas mi blbne systémový čas. V průběhu noci se mi vždy automaticky sníží o 1 hodinu (v BIOSU).
v jiné diskusi (http://usenet.jyxo.cz/cz.comp.linux/0407/posun-systemoveho-casu.html) jsem objevil něco málo rad, ale nikam mně to neposunulo.
Zatím jsem jen udělal toto:

v /etc/rc0.d/@K25hwclock.sh
řádku: # hwclock --adjust $GMT $BADYEAR
jsem dle textu nad ním poslušně odkomentoval a taktéž poslušně smazal (respektive přesunul do /home/zaloha -co kdyby, že) soubor /etc/adjtime.

Nicméně /etc/adjitime se automaticky obnovilo a já jsem, kde jsem byl.

nevím, nakolik je to relevantní informace, ale mám notebook toshibu satelite L35.
pro moderátory:nepřišel jsem na to, kam dotaz zařadit (a atk je tady), když tak prosím o přesunutí. Díky

Díky za rady


přidávám výpis /etc/rc0.d/@K25hwclock.sh
#!/bin/sh
# hwclock.sh   Set and adjust the CMOS clock, according to the UTC
#      setting in /etc/default/rcS (see also rcS(5)).
#
# Version:   @(#)hwclock.sh  2.00  14-Dec-1998  miquels@cistron.nl
#
# Patches:
#      2000-01-30 Henrique M. Holschuh <hmh@rcm.org.br>
#       - Minor cosmetic changes in an attempt to help new
#         users notice something IS changing their clocks
#         during startup/shutdown.
#       - Added comments to alert users of hwclock issues
#         and discourage tampering without proper doc reading.

# WARNING:   Please read /usr/share/doc/util-linux/README.Debian.hwclock
#      or /usr/share/doc/util-linux/README.Debian.hwclock
#      before changing this file. You risk serious clock
#      misbehaviour otherwise.

### BEGIN INIT INFO
# Provides:          hwclock
# Required-Start:    mountdevsubfs
# Required-Stop:     $local_fs
# Default-Start:     S
# Default-Stop:      0 6
### END INIT INFO

FIRST=no   # debian/rules sets this to 'yes' when creating hwclockfirst.sh

# Set this to any options you might need to give to hwclock, such
# as machine hardware clock type for Alphas.
HWCLOCKPARS=

hwclocksh()
{
    [ ! -x /sbin/hwclock ] && return 0
    . /etc/default/rcS

    . /lib/lsb/init-functions
    verbose_log_action_msg() { [ "$VERBOSE" = no ] || log_action_msg "$@"; }

    [ "$GMT" = "-u" ] && UTC="yes"
    case "$UTC" in
       no|"")   GMT="--localtime"
      UTC=""
      if [ "X$FIRST" = "Xyes" ] && [ ! -r /etc/localtime ]; then
          if [ -z "$TZ" ]; then
         log_action_msg "System clock was not updated at this time"
         return 1
          fi
      fi
      ;;
       yes)   GMT="--utc"
      UTC="--utc"
      ;;
       *)   log_action_msg "Unknown UTC setting: \"$UTC\""; return 1 ;;
    esac

    case "$BADYEAR" in
       no|"")   BADYEAR="" ;;
       yes)   BADYEAR="--badyear" ;;
       *)   log_action_msg "unknown BADYEAR setting: \"$BADYEAR\""; return 1 ;;
    esac

    case "$1" in
   start)
       if [ -w /etc ] && [ ! -f /etc/adjtime ] && [ ! -e /etc/adjtime ]; then
      echo "0.0 0 0.0" > /etc/adjtime
       fi

       if [ ! -w /etc/adjtime ]; then
      NOADJ="--noadjfile"
       else
          NOADJ=""
       fi

       if [ "$FIRST" != yes ]; then
      # Uncomment the hwclock --adjust line below if you want
      # hwclock to try to correct systematic drift errors in the
      # Hardware Clock.
      #
      # WARNING: If you uncomment this option, you must either make
      # sure *nothing* changes the Hardware Clock other than
      # hwclock --systohc, or you must delete /etc/adjtime
      # every time someone else modifies the Hardware Clock.
      #[M V0
      # Common "vilains" are: ntp, MS Windows, the BIOS Setup
      # program.
      #
      # WARNING: You must remember to invalidate (delete)
      # /etc/adjtime if you ever need to set the system clock
      # to a very different value and hwclock --adjust is being
      # used.
      #
      # Please read /usr/share/doc/util-linux/README.Debian.hwclock
      # before enablig hwclock --adjust.

      #hwclock --adjust $GMT $BADYEAR
      :
       fi

       if [ "$HWCLOCKACCESS" != no ]; then
      log_action_msg "Setting the system clock"

      # Copies Hardware Clock time to System Clock using the correct
      # timezone for hardware clocks in local time, and sets kernel
      # timezone. DO NOT REMOVE.
      if /sbin/hwclock --hctosys $GMT $HWCLOCKPARS $BADYEAR $NOADJ; then
          #   Announce the local time.
          verbose_log_action_msg "System Clock set to: `date $UTC`"
      else
          log_warning_msg "Unable to set System Clock to: `date $UTC`"
      fi
       else
      verbose_log_action_msg "Not setting System Clock"
       fi
       ;;
   stop|restart|reload|force-reload)
       #
       # Updates the Hardware Clock with the System Clock time.
       # This will *override* any changes made to the Hardware Clock.
       #
       # WARNING: If you disable this, any changes to the system
       #          clock will not be carried across reboots.
       #
       if [ "$HWCLOCKACCESS" != no ]; then
      log_action_msg "Saving the system clock"
      if [ "$GMT" = "-u" ]; then
          GMT="--utc"
      fi
      if /sbin/hwclock --systohc $GMT $HWCLOCKPARS $BADYEAR; then
          verbose_log_action_msg "Hardware Clock updated to `date`"
      fi
       else
      verbose_log_action_msg "Not saving System Clock"
       fi
       ;;
   show)
       if [ "$HWCLOCKACCESS" != no ]; then
      /sbin/hwclock --show $GMT $HWCLOCKPARS $BADYEAR
       fi
       ;;
   *)
       log_success_msg "Usage: hwclock.sh {start|stop|reload|force-reload|show}"
       log_success_msg "       start sets kernel (system) clock from hardware (RTC) clock"
       log_success_msg "       stop and reload set hardware (RTC) clock from kernel (system) clock"
       return 1
       ;;
    esac
}

hwclocksh "$@"

 

20
Archiv / Re: Compiz fusion-po aktualizaci nefunkční
« kdy: 02 Října 2007, 20:57:58 »
Takže mi nakonec pomohl odebrání a nová instalace. díky za rady.

21
Archiv / Compiz fusion - po aktualizaci nefunkční [vyřešeno]
« kdy: 19 Září 2007, 20:45:37 »
Zdravím,

po poslední aktualizaci (18.9.) mi přestal fungovat compiz.
Výpis z konsole:
 haid@haid-laptop:~$ compiz
A handler is already registered for the path starting with path[0] = "org"
<toto je tady hodněkrát :-)>
A handler is already registered for the path starting with path[0] = "org"
A handler is already registered for thaid@haid-laptop:~$ compiz
A handler is already registered for the path starting with path[0] = "org"
<a ještě vícekrát>
A handler is already registered for the path starting with path[0] = "org"
/usr/bin/compiz: line 777:  6910 Segmentation fault      (core dumped) $*
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  145
  Minor opcode:  3
  Resource id:  0x0
Failed to open device
X Error: BadDevice, invalid or uninitialized input device 169
  Major opcode:  145
  Minor opcode:  3
  Resource id:  0x0
Failed to open device

výpis z /usr/bin/compiz line<hned ta první závorka je 777>:
function run_command
{
   verbose Executing: "$*" "\n"
   if [ "x$DRY" = "xyes" ]; then return 0; fi
   if [ -n "$STDOUTPUT" ] && [ -n "$ERROUTPUT" ]; then
      $* 1>> $STDOUTPUT 2>> $ERROUTPUT
   elif [ -n "$STDOUTPUT" ] && [ -z "$ERROUTPUT" ]; then
      $* 1>> $STDOUTPUT
   elif [ -z "$STDOUTPUT" ] && [ -n "$ERROUTPUT" ]; then
      $* 2>> $ERROUTPUT
   else
      $*
   fi
   return $?
}

Díky za radu.

22
Citace: XomboX
Nefrci :-( Nekde jsem vycetl, ze ManDVD schroustne ceske titulky, pouze pokud jsou v kodovani ISO-8859-2. Tak jsem to do tohoto formatu prevedel, ale stejne se mi vsechna pismeka s diakritkou spravne nezobrazuji, třeba "ř, ě".
Uz fakt nevim co s tim.
Běžně používám UTF-8, tam problém nebude. vyzkoušej jiné titulky.

23
Archiv / Video - barvy + titulky
« kdy: 19 Srpna 2007, 08:18:20 »

24
Archiv / Video - barvy + titulky
« kdy: 18 Srpna 2007, 01:20:19 »
co toto: pravé tlačítko do okna s videem. Nastavení a nastavit video.output na "xv".

http://forum.ubuntu.cz/viewtopic.php?id=12089

25
Zdravím!
v posledním okně ManDVD (kde vytváříš samotné DVD a pak pálíš) je dole cosi jako options a tam nastavíš jak kódování titulků, tak jejich velikost, font...
mně se akorát nepovedly titulky v kódování UTF-8, tak jsem je dělal v windows1250.  
Ať se podaří.

jinak já se učil z:
www.abclinuxu.cz/faq/multimedia/prevod-avi-mpg-do-dvd
http://www.abclinuxu.cz/clanky/navody/prevod-filmu-na-dvd
a samozřejmně: http://wiki.ubuntu.cz/ManDVD
(na předposledním obrázku je to okno, kde se nastavuje kódování)

Stran: [1] 2

Provoz zaštiťuje spolek OpenAlt.