Spadla 3d Accelerace (ATi X600 Pro) [vyřešeno]

[Lukáš]

Zdravím, až do dnes mi šlapalo vše bez problému. Chtěl jsem si zahrát a baflo na mě že nejede 3D acc

Zde jsou výpisy:
Xorg.conf

Kód: [Vybrat]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Ati Radeon X600 Pro Generic"
Driver "fglrx"
BusID "PCI:7:0:0"
        Option          "Capabilities" "0x00000800"
        Option          "UseFastTLS" "off"
        Option          "KernelModuleParm" "locked-userpages=0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-70
VertRefresh 50-160
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Ati Radeon X600 Pro Generic"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
        Option  "Composite" "0"
EndSectionfglrxinfo:

Kód: [Vybrat]

gfhacker@gfhacker-pc:~$ fglrxinfo
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5.1)Direct rendering:

Kód: [Vybrat]

gfhacker@gfhacker-pc:~$ glxinfo | grep direct
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
direct rendering: No
OpenGL renderer string: Mesa GLX Indirect
gfhacker@gfhacker-pc:~$glxgears

Kód: [Vybrat]

gfhacker@gfhacker-pc:~$ fgl_glxgears
Using GLX_SGIX_pbuffer
Xlib:  extension "XFree86-DRI" missing on display ":0.0".
X Error of failed request:  BadMatch (invalid parameter attributes)
  Major opcode of failed request:  143 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  30
  Current serial number in output stream:  30Xlib:  extension "XFree86-DRI" missing on display ":0.0". na tomhle řádku asi něco bude.. A pořád se všude hlásí mesa..

Díky za případnou pomoc

Ghafan

[Lukáš]

Nikdo neví? Co mám špatně? Nebo jsem zvolil špatnou sekci?

[machy]

Neaktualizoval jsi teď někdy kernel? Zkus ovladače fglrx nainstalovat znovu. Já na to používám  Envy.

[Martin]

machy a jake mas ubuntu a jakou mas grafickou kartu?

[machy]

Já mám ubuntu 7.04 a integrovanou X200. Envy ale používám už od 6.06 a v pohodě. Stáhne si automaticky nejnovější ovladače, udělá z nich deb balíčky a nainstaluje. To jsem dřív dělal ručně.

[Lukáš]

Díky moc, reinstalace ovladačů v envy pomohla, všecko už zase jede