nefunguje restart - ntb Toshiba Tecra S1 [vyřešeno]

[Cust]

Zdravim vsechny.
(Jsem totalni zacatecnik na linuxu. Nainstaloval jsem Ubuntu hned po testu win Vista .)

Mam problem na mem notebooku Toshiba Tecra S1 (P - Centrino 1.6GHz, 1G RAM, ATI Radeon 9000). Pri pokusu restartovat Ubuntu (7.10 FF) se system jakoby vypina, pak naskoci cerna obrazovka a po pul minute najednou z niceho nic pracovni plocha WinXP (primo z cerne obrazovky ikony win). Nevite jak bych to mohl opravit? (WinXP mam na primarnim oddile - zacatek disku, Ubuntu je na logickych discich na konci). Misto restartu provadim vypnout a zapnout. Jeste, pokud nemam zprovoznene X a jsem jen v text modu, tak bezproblemu restartuju pomoci sudo shutdown -r now

Dekuji za pripadne rady.

[Martin 'Želva' Malý]

To vypadá na to, že se počítač restartuje, ale nezapne se display a zapne se až ve win.
Jak máte seřazený grub? Jestli máte 1. windowsy, tak se počítač poslepu dostane až k nim a zapne monitor až na ploše. U widlí to taky takhle blbne nebo je to jenom u Ubuntu?

[Cust]

Nene, tak to nebude. Grub jsem nekolikrat prehazoval, startuje se prvni Ubuntu. Na grub to nemelo nikdy vliv.
Widle se chovaji dobre. Chyba jen u Ubuntu. Spis si myslim, ze Ubuntu provede restart na (hd0,0), kde jsou win, ubuntu je na (hd0,6)

[MacHala]

Nene, tak to nebude. Grub jsem nekolikrat prehazoval, startuje se prvni Ubuntu. Na grub to nemelo nikdy vliv.
Widle se chovaji dobre. Chyba jen u Ubuntu. Spis si myslim, ze Ubuntu provede restart na (hd0,0), kde jsou win, ubuntu je na (hd0,6)

afaik Linux neni schopen udelat neco jako restart na urcitou partition bez zmeny v grubu...
pro jistotu muzete ukazat vas /boot/grub/menu.lst

[Cust]

posilam cast /boot/grub/menu.lst

Kód: [Vybrat]

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,6)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro

## Setup crashdump menu entries
## e.g. crashdump=1
# crashdump=0

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,6)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash locale=cs_CZ

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## ## End Default Options ##

#title Ubuntu, kernel 2.6.20.3-ubuntu1
#root (hd0,6)
#kernel /boot/vmlinuz-2.6.20.3-ubuntu1 root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro quiet splash locale=cs_CZ
#initrd /boot/initrd.img-2.6.20.3-ubuntu1
#quiet
#savedefault

#title Ubuntu, kernel 2.6.20.3-ubuntu1 (recovery mode)
#root (hd0,6)
#kernel /boot/vmlinuz-2.6.20.3-ubuntu1 root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro single
#initrd /boot/initrd.img-2.6.20.3-ubuntu1

#title Ubuntu, kernel 2.6.20-16-386
#root (hd0,6)
#kernel /boot/vmlinuz-2.6.20-16-386 root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro quiet splash locale=cs_CZ
#initrd /boot/initrd.img-2.6.20-16-386
#quiet
#savedefault

#title Ubuntu, kernel 2.6.20-16-386 (recovery mode)
#root (hd0,6)
#kernel /boot/vmlinuz-2.6.20-16-386 root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro single
#initrd /boot/initrd.img-2.6.20-16-386

title Ubuntu, kernel 2.6.20-16-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro quiet splash locale=cs_CZ
initrd /boot/initrd.img-2.6.20-16-generic
quiet
savedefault

title Ubuntu, kernel 2.6.20-16-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.20-16-generic root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro single
initrd /boot/initrd.img-2.6.20-16-generic

title Ubuntu, kernel 2.6.20-15-generic
root (hd0,6)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro quiet splash locale=cs_CZ
initrd /boot/initrd.img-2.6.20-15-generic
quiet
savedefault

title Ubuntu, kernel 2.6.20-15-generic (recovery mode)
root (hd0,6)
kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=dfd4ea4c-f3c1-4283-a74a-01771914657e ro single
initrd /boot/initrd.img-2.6.20-15-generic

title Ubuntu, memtest86+
root (hd0,6)
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1

[truhlik]

Jeste asi bude potreba ta horni cast. Zejmena radek kde je napsano "default" a za nim nejake cislo.

[anicka]

Trochu jsem upravila a doplnila název tématu (původní název "Nefunguje RESTART") na "nefunguje restart - ntb Toshiba Tecra S1". Děkuji za pochopení. :-)

[Cust]

tak uz jsem to doplnil, ted je tam to menu cele....
default je tedy 0


taky jsem smazal ten druhy dotaz a dam to do noveho vlakna....

[Cust]

opravdu nikdo netusi co s tim?

[Cust]

Problem vyresen, dostal jsem nabidku levneho noveho notebooku Sony. Toshiba je prodana.