Obnovoací frekvence/edit xorgu

[Ancestor]

Takže sem zeditoval xorg takto>

#nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@yellow)  Thu Jun  5 09:27:12 UTC 2008

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ACI ASUS VW193D"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "1440x900_80 +0+0; nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Ale zdá se mi,že stejně je to na oči nepříjemné.Zkontrolujte mi ten xorg pls jěště díky moc

[Ancestor]

Trošku sem to změnil,ale i tak,zdá se že to 80hz není.Tady je rozsah frekvencí mýho monitoru,myslíte,že můžu zkusit alespoň 90?A nebo by stačilo 80 ale mám někde chybu a proto se nenastavily?dik.

                                       Vodorovná       Svislá      Pixel
                 1440 x 900    55,935 KHz      60 Hz     106,5 MHz
 WXGA+
                 1440 x 900    70,635 KHz      75 Hz     136,75 MHz

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@yellow)  Thu Jun  5 09:27:12 UTC 2008

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ACI ASUS VW193D"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
# 1440x900 @ 80.00 Hz (GTF) hsync: 75.36 kHz; pclk: 147.10 MHz
  Modeline "1440x900_80.00"  147.10  1440 1536 1696 1952  900 901 904 942  -HSync +Vsync
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "1440x900_80 +0+0; nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

[TIBOR]

Skutocnu frekvenciu u nvidie si zistis prikazom

Kód: [Vybrat]

nvidia-settings -q RefreshRate

[Ancestor]

hm ja třo tusil takze co ted lidi
Attribute 'RefreshRate' (lukas-desktop:0.0; display device: CRT-0): 60,17
  Hz.
    'RefreshRate' is an integer attribute.
    'RefreshRate' is a read-only attribute.
    'RefreshRate' is display device specific.
    'RefreshRate' can use the following target types: X Screen, GPU.

[TIBOR]

Aku verziu ubuntu pouzivas? Ak to nechas nadetekovat automaticky(povodny xorg.conf) a nastavis ju cez nvidia-settings, co to pise? Aku frekvenciu.

[Ancestor]

Aku verziu ubuntu pouzivas? Ak to nechas nadetekovat automaticky(povodny xorg.conf) a nastavis ju cez nvidia-settings, co to pise? Aku frekvenciu.

Mam 8.04 Najel sem do systém>správa>nvidia x server settings a mam tam na vyber bud 60 nebo 75,dal sem 75 a apply,blik vypada ok,jenze me nejde ulozit.Kdyz dam save to X configiration file tak me to napise Unable to remove old X config backup file '/etc/X11/xorg.conf.backup'.
Takze sem si dal náhled,zkopcil to a podle toho editoval rucne xorg ale po restartu mi to azse vypisuje 60 jak predchili.Pritom v xorgu je nastaveno

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "ACI ASUS VW193D"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 8800 GTS"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "1440x900_75 +0+0; nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

[TIBOR]

Ak to spustas cez system-sprava ... tak to nema prava na zapis. Musis to spustat cez terminal prikazom

Kód: [Vybrat]

gksu nvidia-settingsPripadne system-predvolby-hlavne menu tam sprava a pravym na ten spustac. Vlastnosti a v policku prikaz dat pred prikaz gksu. Po tomto sa ti cez menu bude spustat s pravom zapisu.

[Ancestor]

Pořád nic,po restartu je to opět na 60!!Hm takze me tu asi nikdo neporadí.To s ebudu muset zase vratit k xp jen kvůli o frekvenci??No ták.

[Ancestor]

Tak fajn tohle je to nahrazeni xp jak se pise?ignorace nastveni xorgu a takova primitivnost jako nastaveni o frekvence to ani nezvladne,takze s ubuntu koncim podruhy a uz nefinitivne.Boze to je system,a podpora na forech jeste lepsi.

[karel kudrna]

podle mě to má být

Kód: [Vybrat]

gksudo nvidia-settingsjestli se mýlím, tak mě opravte, tak jak to tady bylo to zřejmě nefungovalo...