Nefunkční vypalování

[On]

Už jsem z toho zoufalý.. už ve verzi 7.10 mi vypalování dělalo problémy, doufal jsem, že se to změní přechodem na 8.04 nějakou aktualizací, ale ani to nepomohlo..chybu budu mít asi někde v systému, bůh ví, co jsem kde změnil, když jsem systém zaváděl..Takže, používám k3b, při vypálení dvd to vypáli tak z 20ti procent, pak to rychle přeskočí na 100 procent a následuje hláška "write error"..při vypálení CD se vypalování ani nerozjede. CD tedy aspoň zůstane zachováno, ale dvd je pak už nepoužitelné. Když to dvd vypálí z nějakých těch 20ti procent, tak nějaké data na něm jsou (opticky), ale po vložení do mechaniky to nenačte nic. Zničil jsem už pokusama hodně nosičů, tak se tedy obracím na odbornou pomoc ...Zkoušel jsem i změnit práva v /dev/scd0 na 777, zkoušel jsem i jiný program - Brasero, to hlásilo, že vypálení brání nějaká knihovna z k3b..tak jsem ho odinstaloval, teď mi to pro změnu hlásí  "nelze zapsat na cd" nebo tak něco..přikládám protokol z Brasera, jestli se v tom někdo vyzná.

Kód: [Vybrat]

Checking session consistency (brasero_burn_check_session_consistency burn.c:1794)
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack called brasero_job_get_input_type
BraseroLocalTrack no foreign URIs
BraseroLocalTrack stopping
BraseroWodim called brasero_job_get_action
BraseroWodim creating input
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim got varg:
BraseroWodim deactivating
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage getting varg
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_current_track
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_data_label
BraseroGenisoimage called brasero_job_get_flags
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_set_current_action
BraseroGenisoimage called brasero_job_start_progress
BraseroGenisoimage got varg:
/usr/bin/genisoimage
-input-charset
utf8
-r
-J
-graft-points
-path-list
/tmp/brasero_tmp_YHDAHU
-exclude-list
/tmp/brasero_tmp_2JDAHU
-V
Datový disk (12 zář 08)
-A
Brasero-0.8.1
-sysid
LINUX
-quiet
-print-size
BraseroGenisoimage launching command
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage stderr: HUP
BraseroGenisoimage stdout: 53206
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_set_output_size_for_current_track
BraseroGenisoimage stdout: HUP
BraseroGenisoimage process finished with status 0
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage finished track successfully
BraseroGenisoimage got killed
BraseroGenisoimage stopping
BraseroWodim called brasero_job_get_action
BraseroWodim creating input
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_get_device
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_speed
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_fd_in
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_session_output_size
BraseroWodim called brasero_job_set_current_action
BraseroWodim got varg:
wodim
-v
dev=/dev/scd0
gracetime=0
speed=48
driveropts=burnfree
fs=4m
tsize=53206s
-dao
-data
-nopad
-
BraseroWodim launching command
BraseroWodim called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage linked to BraseroWodim
BraseroGenisoimage getting varg
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_current_track
BraseroGenisoimage called brasero_job_get_tmp_dir
BraseroGenisoimage called brasero_job_get_data_label
BraseroGenisoimage called brasero_job_get_flags
BraseroGenisoimage called brasero_job_get_action
BraseroGenisoimage called brasero_job_get_fd_out
BraseroGenisoimage called brasero_job_set_current_action
BraseroGenisoimage got varg:
/usr/bin/genisoimage
-input-charset
utf8
-r
-J
-graft-points
-path-list
/tmp/brasero_tmp_X4RZGU
-exclude-list
/tmp/brasero_tmp_Z5RZGU
-V
Datový disk (12 zář 08)
-A
Brasero-0.8.1
-sysid
LINUX
BraseroGenisoimage launching command
BraseroGenisoimage called brasero_job_get_fd_out
BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: devname: '/dev/scd0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Linux sg driver version: 3.5.27
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Wodim version: 1.1.6
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: SCSI buffer size: 64512
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: communication breaks or freezes immediately after that.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 1 = CD-ROM
BraseroWodim stdout: Driveropts: 'burnfree'
BraseroWodim stdout: Device type    : Removable CD-ROM
BraseroWodim stdout: Version        : 5
BraseroWodim stdout: Response Format: 2
BraseroWodim stdout: Capabilities   :
BraseroWodim stdout: Vendor_info    : 'HL-DT-ST'
BraseroWodim stdout: Identification : 'DVDRAM GSA-H62N '
BraseroWodim stdout: Revision       : 'CL00'
BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW.
BraseroWodim stdout: Current: 0x0009 (CD-R)
BraseroWodim stdout: Profile: 0x0012 (DVD-RAM)
BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording)
BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording)
BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording)
BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording)
BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite)
BraseroWodim stdout: Profile: 0x001A (DVD+RW)
BraseroWodim stdout: Profile: 0x001B (DVD+R)
BraseroWodim stdout: Profile: 0x002B (DVD+R/DL)
BraseroWodim stdout: Profile: 0x0010 (DVD-ROM)
BraseroWodim stdout: Profile: 0x0009 (CD-R) (current)
BraseroWodim stdout: Profile: 0x000A (CD-RW)
BraseroWodim stdout: Profile: 0x0008 (CD-ROM)
BraseroWodim stdout: Profile: 0x0002 (Removable disk)
BraseroWodim stdout: Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
BraseroWodim stdout: Driver flags   : MMC-3 SWABAUDIO BURNFREE
BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
BraseroWodim stdout: Drive buf size : 1053696 = 1029 KB
BraseroWodim stdout: Drive DMA Speed: 16932 kB/s 96x CD 12x DVD
BraseroWodim stdout: FIFO size      : 4194304 = 4096 KB
BraseroWodim stderr: Speed set to 8468 KB/s
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01: data   103 MB       
BraseroWodim stdout: Total size:      119 MB (11:49.41) = 53206 sectors
BraseroWodim stdout: Lout start:      119 MB (11:51/31) = 53206 sectors
BraseroWodim stdout: Current Secsize: 2048
BraseroWodim stdout: ATIP info from disk:
BraseroWodim stdout:   Indicated writing power: 5
BraseroWodim stdout:   Is not unrestricted
BraseroWodim stdout:   Is not erasable
BraseroWodim stdout:   Disk sub type: Medium Type B, low Beta category (B-) (4)
BraseroWodim stdout:   ATIP start of lead in:  -12369 (97:17/06)
BraseroWodim stdout:   ATIP start of lead out: 359849 (79:59/74)
BraseroWodim stdout: Disk type:    Short strategy type (Phthalocyanine or similar)
BraseroWodim stdout: Manuf. index: 69
BraseroWodim stdout: Manufacturer: Moser Baer India Limited
BraseroWodim stdout: Manufacturer is guessed because of the orange forum embargo.
BraseroWodim stdout: The orange forum likes to get money for recent information.
BraseroWodim stdout: The information for this media may not be correct.
BraseroWodim stdout: Blocks total: 359849 Blocks current: 359849 Blocks remaining: 306643
BraseroWodim stdout: Starting to write CD/DVD at speed  48.0 in real SAO mode for single session.
BraseroWodim stdout: Last chance to quit, starting real write in  0 seconds. Operation starts.
BraseroWodim called brasero_job_set_dangerous
BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready.
BraseroWodim stdout: Performing OPC...
BraseroWodim stdout: Sending CUE sheet...
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_set_current_action
BraseroWodim stderr: wodim: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Errno: 5 (Input/output error), send_cue_sheet scsi sendcmd: no error
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: CDB:  5D 00 00 00 00 00 00 00 20 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: status: 0x2 (CHECK CONDITION)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Bytes: 70 00 05 00 00 00 00 0A 5D 34 02 80 26 00 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Key: 0x5 Illegal Request, Segment 0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense flags: Blk 0 (not valid)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: cmd finished after 0.004s timeout 200s
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Cannot send CUE sheet.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Could not write Lead-in.
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
error = 1
message = "nelze zapsat cd informace"
BraseroGenisoimage stopping
BraseroGenisoimage got killed
BraseroGenisoimage disconnecting BraseroGenisoimage from BraseroWodim
BraseroWodim stopping
BraseroWodim got killed
BraseroWodim closing connection for BraseroWodim
Session error : nelze zapsat cd informace (brasero_burn_record burn.c:2384)
Určitě to bude nějaká capina, kterou jsem udělal při nastavování systému..je to už ale tak půl roku, tuto dobu jsem se to snažil nějak překousnout, ale už vypalování potřebuju.

edit: Data jsem zapisoval jak z disku, který je běžně "pod zámkem", ale taky z disku,kde je přístup pro všechny. Ikdyž se to nemá,tak jsem na zkoušku spouštěl k3b i jako root a ani to nepomohlo. Jestli je problém v hardwaru samotném netuším, ten samý problém mi to dělá i doma..ale doma to jednu dobu fungovalo, nejsem si ale vědom toho, že bych někde něco měnil :/

[On]

Opravdu se s tím nikdo nesetkal?

[Ender Wiggin]

Je to opravdu /dev/scd0 ?

[On]

opravdu je, má jich tam víc..jiný než scd0 jsem nezkoušel

Kód: [Vybrat]

ladik@ladik:~$ sudo lshw -C disk
[sudo] password for ladik:
  *-cdrom                 
       description: DVD-RAM writer
       product: DVDRAM GSA-H62N
       vendor: HL-DT-ST
       physical id: 0.0.0
       bus info: scsi@1:0.0.0
       logical name: /dev/cdrom2
       logical name: /dev/dvd2
       logical name: /dev/scd0
       logical name: /dev/sr0
       version: CL00
       capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
       configuration: ansiversion=5 status=open
 

Výpis z fstab:
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0

[On]

pořád nikdo, kdo by poradil?

[Lukee159]

pořád nikdo, kdo by poradil?

Nezkoušel jsi jen pro ujištění nějakou jinou mechaniku, než co máš v PC?

[On]

No, při instalaci ubuntu tam byla jen čtečka na kabel IDE..až po čase jsem si ji vyměnil za vypalovačku SATA. Jediná tato výměna proběhla...každopádně jinou vypalovačku jsem nezkoušel. Divné je totiž to, že podobný problém, ne-li stejný (už jsem dlouho nevypaloval, pač si nechci ničit nosiče)mám i doma. Z toho usuzuji, že bude problém softwarový

[nettezzaumana]

zkus vypalit z cmdlajny aka ::

mkisofs -J -R -o /path/to/image.iso /nejaka/slozka // vytvori image.iso ktere vypalis
wodim -v dev=/dev/sr1 speed=8 /path/to/image.iso // /dev/sr1 je nutno nahradit za tvoji device

[On]

Tak udělalo to výpis:

Kód: [Vybrat]

ladik@ladik:~$ sudo wodim -v dev=/dev/cdrom2 speed=8 /home/ladik/zaloha/new.iso //
[sudo] password for ladik:
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrom2'
devname: '/dev/cdrom2'
scsibus: -2 target: -2 lun: -2
Error trying to open /dev/cdrom2 exclusively (Device or resource busy)... retrying in 1 second.
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-H62N '
Revision       : 'CL00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R) (current)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 16712 kB/s 94x CD 12x DVD
FIFO size      : 12582912 = 12288 KB
Track 01: data   642 MB       
Track 02: data  unknown length
Total size:      737 MB (73:06.88) = 329016 sectors
Lout start:      738 MB (73:08/66) = 329016 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -12369 (97:17/06)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 69
Manufacturer: Moser Baer India Limited
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 30833
Speed set to 1411 KB/s
Starting to write CD/DVD at speed   8.0 in real TAO mode for single session.
Last chance to quit, starting real write i   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of  642 MB written.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 5D 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0C 00 00 00 02 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 50.500s timeout 40s

write track data: error after 190464 bytes
wodim: A write error occured.
wodim: Please properly read the error message above.
Writing  time:   65.585s
Average write speed  66.9x.
Fixating...
Fixating time:   35.234s
Errno: 5 (Input/output error), prevent/allow medium removal scsi sendcmd: fatal error
CDB:  1E 00 00 00 00 00
cmd finished after 0.000s timeout 40s
wodim: fifo had 195 puts and 4 gets.
wodim: fifo was 0 times empty and 2 times full, min fill was 98%.
 
Chování stejné jak při normálním vypalování, tzn. ubuntu už nerozpozná "Prázdný disk", na ploše se ikona pro nosič v mechanice neobjeví, CD je nejspíš nečitelné, bez zápisu = nepoužitelné. Jsou to nosiče z práce, takže můžem laborovat..pokud má ještě někdo nějaký nápad, případně zná příčinu problému