posilam vypisy z terminalu pro lsmod a dmesg:
jan@desktop:~$ lsmod
Module Size Used by
nls_iso8859_1 12032 0
nls_cp437 13696 0
vfat 18816 0
fat 58272 1 vfat
usb_storage 82880 0
binfmt_misc 16776 1
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
input_polldev 11912 0
video 25360 0
output 11008 1 video
lp 17156 0
ppdev 15620 0
snd_emu10k1_synth 14336 0
snd_emux_synth 40832 1 snd_emu10k1_synth
snd_seq_virmidi 13440 1 snd_emux_synth
snd_seq_midi_emul 14592 1 snd_emux_synth
snd_emu10k1 144288 4 snd_emu10k1_synth
snd_ac97_codec 112292 1 snd_emu10k1
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 82948 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 16904 2 snd_emu10k1,snd_pcm
snd_util_mem 12288 2 snd_emux_synth,snd_emu10k1
snd_hwdep 15108 2 snd_emux_synth,snd_emu10k1
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event 15104 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 56880 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29704 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 14988 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 62628 19 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 61972 0
pcspkr 10496 0
serio_raw 13316 0
soundcore 15200 1 snd
sis_agp 15360 1
parport_pc 40100 1
parport 42220 3 lp,ppdev,parport_pc
i2c_sis96x 12420 0
i2c_sis630 14348 0
shpchp 40212 0
agpgart 42696 1 sis_agp
8139too 32128 0
8139cp 27776 0
mii 13312 2 8139too,8139cp
floppy 64324 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
[ 0.000000] modified: 00000000ffee0000 - 00000000fff00000 (reserved)
[ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-16000
[ 0.000000] RAMDISK: 1f8ae000 - 1ffdf5e9
[ 0.000000] ACPI: RSDP 000FA420, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 1FFF0000, 002C (r1 AMIINT SiS735XX 1000 MSFT 100000B)
[ 0.000000] ACPI: FACP 1FFF0030, 0081 (r1 AMIINT SiS735XX 11 MSFT 100000B)
[ 0.000000] ACPI: DSDT 1FFF0110, 32F2 (r1 SiS 745 100 MSFT 100000D)
[ 0.000000] ACPI: FACS 1FFF8000, 0040
[ 0.000000] ACPI: APIC 1FFF00C0, 0050 (r1 AMIINT SiS735XX 1000 MSFT 100000B)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 00000000 - 1fff0000
[ 0.000000] bootmap 00012000 - 00016000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [001f8ae000 - 001ffdf5e9] RAMDISK ==> [001f8ae000 - 001ffdf5e9]
[ 0.000000] #5 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000016000] BOOTMAP ==> [0000012000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00fb980] 000fb980
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fff0
[ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fff0
[ 0.000000] On node 0 totalpages: 130943
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125968 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919
[ 0.000000] Kernel command line: root=UUID=dbad45e8-4e03-4bf8-a19f-828415402f13 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1500.094 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] allocated 2620800 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 501404k/524224k available (4126k kernel code, 22192k reserved, 2208k data, 532k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xe07f0000 - 0xff3fe000 ( 492 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004020] Calibrating delay loop (skipped), value calculated using timer frequency.. 3000.18 BogoMIPS (lpj=6000376)
[ 0.004055] Security Framework initialized
[ 0.004068] SELinux: Disabled at boot.
[ 0.004114] AppArmor: AppArmor initialized
[ 0.004129] Mount-cache hash table entries: 512
[ 0.004373] Initializing cgroup subsys ns
[ 0.004380] Initializing cgroup subsys cpuacct
[ 0.004384] Initializing cgroup subsys memory
[ 0.004391] Initializing cgroup subsys freezer
[ 0.004412] CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
[ 0.004417] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004421] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004448] Checking 'hlt' instruction... OK.
[ 0.020667] SMP alternatives: switching to UP code
[ 0.225016] Freeing SMP alternatives: 18k freed
[ 0.225027] ACPI: Core revision 20080926
[ 0.229025] ACPI: Checking initramfs for custom DSDT
[ 0.618263] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.657958] CPU0: AMD Athlon(tm) XP 1800+ stepping 01
[ 0.660002] Brought up 1 CPUs
[ 0.660002] Total of 1 processors activated (3000.18 BogoMIPS).
[ 0.660002] CPU0 attaching NULL sched-domain.
[ 0.660002] net_namespace: 776 bytes
[ 0.660002] Booting paravirtualized kernel on bare hardware
[ 0.660002] Time: 16:59:45 Date: 04/27/09
[ 0.660002] regulator: core version 0.5
[ 0.660002] NET: Registered protocol family 16
[ 0.660002] EISA bus registered
[ 0.660002] ACPI: bus type pci registered
[ 0.660002] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2
[ 0.660002] PCI: Using configuration type 1 for base access
[ 0.661747] ACPI: EC: Look up EC in DSDT
[ 0.668636] ACPI: Interpreter enabled
[ 0.668645] ACPI: (supports S0 S1 S4 S5)
[ 0.668670] ACPI: Using IOAPIC for interrupt routing
[ 0.674915] ACPI: No dock devices found.
[ 0.674932] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.675009] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff]
[ 0.675143] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.675189] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f]
[ 0.675223] pci 0000:00:02.2: reg 10 32bit mmio: [0xcfffe000-0xcfffefff]
[ 0.675274] pci 0000:00:02.3: reg 10 32bit mmio: [0xcffff000-0xcfffffff]
[ 0.675348] pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f]
[ 0.675406] pci 0000:00:0a.0: reg 10 io port: [0xdc00-0xdc3f]
[ 0.675444] pci 0000:00:0a.0: supports D1 D2
[ 0.675477] pci 0000:00:0b.0: reg 10 32bit mmio: [0xcff90000-0xcff9ffff]
[ 0.675485] pci 0000:00:0b.0: reg 14 io port: [0xd800-0xd807]
[ 0.675517] pci 0000:00:0b.0: supports D1 D2
[ 0.675521] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.675527] pci 0000:00:0b.0: PME# disabled
[ 0.675561] pci 0000:00:0c.0: reg 10 io port: [0xd400-0xd4ff]
[ 0.675569] pci 0000:00:0c.0: reg 14 32bit mmio: [0xcfffdf00-0xcfffdfff]
[ 0.675596] pci 0000:00:0c.0: reg 30 32bit mmio: [0xcffe0000-0xcffeffff]
[ 0.675606] pci 0000:00:0c.0: supports D1 D2
[ 0.675609] pci 0000:00:0c.0: PME# supported from D1 D2 D3hot D3cold
[ 0.675614] pci 0000:00:0c.0: PME# disabled
[ 0.675683] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
[ 0.675691] pci 0000:01:00.0: reg 14 32bit mmio: [0xc0000000-0xc7ffffff]
[ 0.675715] pci 0000:01:00.0: reg 30 32bit mmio: [0xcfee0000-0xcfefffff]
[ 0.675769] pci 0000:00:01.0: bridge 32bit mmio: [0xcdd00000-0xcfefffff]
[ 0.675776] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbda00000-0xcdbfffff]
[ 0.675786] bus 00 -> node 0
[ 0.675795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.677304] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.677493] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.677670] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.677846] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.678021] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.678197] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.678373] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.678548] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.678672] ACPI: Power Resource [URP1] (off)
[ 0.678725] ACPI: Power Resource [URP2] (off)
[ 0.678772] ACPI: Power Resource [FDDP] (off)
[ 0.678817] ACPI: Power Resource [LPTP] (off)
[ 0.678939] ACPI: WMI: Mapper loaded
[ 0.679361] SCSI subsystem initialized
[ 0.679451] libata version 3.00 loaded.
[ 0.679544] usbcore: registered new interface driver usbfs
[ 0.679575] usbcore: registered new interface driver hub
[ 0.679627] usbcore: registered new device driver usb
[ 0.679834] PCI: Using ACPI for IRQ routing
[ 0.680025] Bluetooth: Core ver 2.13
[ 0.680112] NET: Registered protocol family 31
[ 0.680115] Bluetooth: HCI device and connection manager initialized
[ 0.680121] Bluetooth: HCI socket layer initialized
[ 0.680125] NET: Registered protocol family 8
[ 0.680128] NET: Registered protocol family 20
[ 0.680145] NetLabel: Initializing
[ 0.680147] NetLabel: domain hash size = 128
[ 0.680150] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.680181] NetLabel: unlabeled traffic allowed by default
[ 0.680353] AppArmor: AppArmor Filesystem Enabled
[ 0.680367] pnp: PnP ACPI init
[ 0.680367] ACPI: bus type pnp registered
[ 0.686019] pnp: PnP ACPI: found 13 devices
[ 0.686023] ACPI: ACPI bus type pnp unregistered
[ 0.686030] PnPBIOS: Disabled by ACPI PNP
[ 0.720847] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.720850] pci 0000:00:01.0: IO window: disabled
[ 0.720859] pci 0000:00:01.0: MEM window: 0xcdd00000-0xcfefffff
[ 0.720864] pci 0000:00:01.0: PREFETCH window: 0x000000bda00000-0x000000cdbfffff
[ 0.720887] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.720890] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.720893] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.720896] bus: 01 index 1 mmio: [0xcdd00000-0xcfefffff]
[ 0.720899] bus: 01 index 2 mmio: [0xbda00000-0xcdbfffff]
[ 0.720902] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.720925] NET: Registered protocol family 2
[ 0.721127] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.721541] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.721873] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.722217] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.722221] TCP reno registered
[ 0.722448] NET: Registered protocol family 1
[ 0.722703] checking if image is initramfs... it is
[ 1.224048] Switched to high resolution mode on CPU 0
[ 1.599695] Freeing initrd memory: 7365k freed
[ 1.599920] cpufreq: No nForce2 chipset.
[ 1.600201] audit: initializing netlink socket (disabled)
[ 1.600241] type=2000 audit(1240851585.600:1): initialized
[ 1.610707] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.612598] VFS: Disk quotas dquot_6.5.1
[ 1.612694] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.613624] fuse init (API version 7.10)
[ 1.613735] msgmni has been set to 994
[ 1.614096] alg: No test for stdrng (krng)
[ 1.614118] io scheduler noop registered
[ 1.614122] io scheduler anticipatory registered
[ 1.614125] io scheduler deadline registered
[ 1.614148] io scheduler cfq registered (default)
[ 1.614264] pci 0000:01:00.0: Boot video device
[ 1.619054] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.619068] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.619290] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.619295] ACPI: Power Button (FF) [PWRF]
[ 1.619374] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.619378] ACPI: Power Button (CM) [PWRB]
[ 1.619592] processor ACPI_CPU:00: registered as cooling_device0
[ 1.622232] isapnp: Scanning for PnP cards...
[ 1.975538] isapnp: No Plug & Play device found
[ 1.977648] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.977765] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.977862] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.978231] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.978372] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.979571] brd: module loaded
[ 1.980124] loop: module loaded
[ 1.980272] Fixed MDIO Bus: probed
[ 1.980283] PPP generic driver version 2.4.2
[ 1.980394] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.980453] Driver 'sd' needs updating - please use bus_type methods
[ 1.980476] Driver 'sr' needs updating - please use bus_type methods
[ 1.981266] pata_sis 0000:00:02.5: version 0.5.2
[ 1.981649] scsi0 : pata_sis
[ 1.981844] scsi1 : pata_sis
[ 1.983150] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.983155] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 2.200571] ata1.00: ATA-6: ST3120022A, 3.06, max UDMA/100
[ 2.200575] ata1.00: 234441648 sectors, multi 16: LBA48
[ 2.216378] ata1.00: configured for UDMA/100
[ 2.388360] ata2.00: ATAPI: LITE-ON DVDRW SOHW-1653S, CS02, max UDMA/66
[ 2.388399] ata2.01: ATAPI: CD-W540E, 1.0D, max UDMA/33
[ 2.388423] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 2.404253] ata2.00: configured for UDMA/33
[ 2.420279] ata2.01: configured for UDMA/33
[ 2.421089] scsi 0:0:0:0: Direct-Access ATA ST3120022A 3.06 PQ: 0 ANSI: 5
[ 2.421262] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 2.421294] sd 0:0:0:0: [sda] Write Protect is off
[ 2.421298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.421343] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.421475] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 2.421500] sd 0:0:0:0: [sda] Write Protect is off
[ 2.421503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.421544] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.421551] sda: sda1 sda2 < sda5 >
[ 2.455736] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.455836] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.456640] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1653S CS02 PQ: 0 ANSI: 5
[ 2.460539] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.460545] Uniform CD-ROM driver Revision: 3.20
[ 2.460712] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.460788] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.462429] scsi 1:0:1:0: CD-ROM TEAC CD-W540E 1.0D PQ: 0 ANSI: 5
[ 2.464799] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.464900] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.464953] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 2.465182] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.465209] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.465254] ohci_hcd 0000:00:02.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.465309] ohci_hcd 0000:00:02.2: OHCI Host Controller
[ 2.465426] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 2.465482] ohci_hcd 0000:00:02.2: irq 19, io mem 0xcfffe000
[ 2.522115] usb usb1: configuration #1 chosen from 1 choice
[ 2.522159] hub 1-0:1.0: USB hub found
[ 2.522182] hub 1-0:1.0: 3 ports detected
[ 2.522341] ohci_hcd 0000:00:02.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.522357] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 2.522429] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 2.522458] ohci_hcd 0000:00:02.3: irq 23, io mem 0xcffff000
[ 2.578067] usb usb2: configuration #1 chosen from 1 choice
[ 2.578114] hub 2-0:1.0: USB hub found
[ 2.578132] hub 2-0:1.0: 3 ports detected
[ 2.578249] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.578396] usbcore: registered new interface driver libusual
[ 2.578452] usbcore: registered new interface driver usbserial
[ 2.578469] USB Serial support registered for generic
[ 2.578510] usbcore: registered new interface driver usbserial_generic
[ 2.578513] usbserial: USB Serial Driver core
[ 2.578588] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.578892] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.578903] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.579076] mice: PS/2 mouse device common for all mice
[ 2.579260] rtc_cmos 00:02: RTC can wake from S4
[ 2.579318] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.579346] rtc0: alarms up to one month, 114 bytes nvram
[ 2.579445] device-mapper: uevent: version 1.0.3
[ 2.579646] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.579746] device-mapper: multipath: version 1.0.5 loaded
[ 2.579752] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.579900] EISA: Probing bus 0 at eisa.0
[ 2.579942] EISA: Detected 0 cards.
[ 2.579996] cpuidle: using governor ladder
[ 2.580029] cpuidle: using governor menu
[ 2.580813] TCP cubic registered
[ 2.580939] NET: Registered protocol family 10
[ 2.581555] lo: Disabled Privacy Extensions
[ 2.582022] NET: Registered protocol family 17
[ 2.582053] Bluetooth: L2CAP ver 2.11
[ 2.582055] Bluetooth: L2CAP socket layer initialized
[ 2.582060] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.582063] Bluetooth: SCO socket layer initialized
[ 2.582127] Bluetooth: RFCOMM socket layer initialized
[ 2.582142] Bluetooth: RFCOMM TTY layer initialized
[ 2.582145] Bluetooth: RFCOMM ver 1.10
[ 2.582178] powernow-k8: Processor cpuid 681 not supported
[ 2.582226] Using IPI No-Shortcut mode
[ 2.582409] registered taskstats version 1
[ 2.582550] Magic number: 5:157:996
[ 2.582720] rtc_cmos 00:02: setting system clock to 2009-04-27 16:59:47 UTC (1240851587)
[ 2.582725] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.582727] EDD information not available.
[ 2.584160] Freeing unused kernel memory: 532k freed
[ 2.584342] Write protecting the kernel text: 4128k
[ 2.584399] Write protecting the kernel read-only data: 1532k
[ 2.623398] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.908054] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 3.088117] usb 1-1: device descriptor read/64, error -62
[ 3.227261] Floppy drive(s): fd0 is 1.44M
[ 3.247911] FDC 0 is a post-1991 82077
[ 3.376088] usb 1-1: device descriptor read/64, error -62
[ 3.420129] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.420201] 8139cp 0000:00:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.432909] 8139too Fast Ethernet driver 0.9.28
[ 3.433014] 8139too 0000:00:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.434227] eth0: RealTek RTL8139 at 0xd400, 00:00:00:00:00:00, IRQ 19
[ 3.434231] eth0: Identified 8139 chip type 'RTL-8100'
[ 3.656131] usb 1-1: new full speed USB device using ohci_hcd and address 3
[ 3.836144] usb 1-1: device descriptor read/64, error -62
[ 4.120066] usb 1-1: device descriptor read/64, error -62
[ 4.172239] PM: Starting manual resume from disk
[ 4.172248] PM: Resume from partition 8:5
[ 4.172251] PM: Checking hibernation image.
[ 4.172581] PM: Resume from disk failed.
[ 4.223164] kjournald starting. Commit interval 5 seconds
[ 4.223191] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.400049] usb 1-1: new full speed USB device using ohci_hcd and address 4
[ 4.808047] usb 1-1: device not accepting address 4, error -62
[ 4.984049] usb 1-1: new full speed USB device using ohci_hcd and address 5
[ 5.392033] usb 1-1: device not accepting address 5, error -62
[ 5.392079] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 5.568048] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 5.777633] usb 2-1: configuration #1 chosen from 1 choice
[ 5.780456] hub 2-1:1.0: USB hub found
[ 5.783410] hub 2-1:1.0: 4 ports detected
[ 9.187328] udev: starting version 141
[ 9.464019] Linux agpgart interface v0.103
[ 9.477092] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.487728] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
[ 9.503665] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 9.503678] ACPI: I/O resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f]
[ 9.503682] ACPI: Device needs an ACPI driver
[ 9.552125] parport_pc 00:0a: reported by Plug and Play ACPI
[ 9.552238] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 9.566241] agpgart-sis 0000:00:00.0: SiS chipset [1039/0745]
[ 9.572586] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[ 9.831552] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.071839] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 10.417830] EMU10K1_Audigy 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.420433] Audigy2 value: Special config.
[ 10.528099] psmouse serio1: ID: 10 00 64<6>ppdev: user-space parallel port driver
[ 11.034571] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 11.185284] lp0: using parport0 (interrupt-driven).
[ 11.359976] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k
[ 11.943496] EXT3 FS on sda1, internal journal
[ 13.357224] type=1505 audit(1240851598.273:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1838
[ 13.454259] type=1505 audit(1240851598.369:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1842
[ 13.454752] type=1505 audit(1240851598.369:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1842
[ 13.454900] type=1505 audit(1240851598.369:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1842
[ 13.455029] type=1505 audit(1240851598.369:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1842
[ 13.728096] type=1505 audit(1240851598.645:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1847
[ 13.728734] type=1505 audit(1240851598.645:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1847
[ 13.789453] type=1505 audit(1240851598.705:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1851
[ 17.372468] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 17.372475] Bluetooth: BNEP filters: protocol multicast
[ 17.431072] Bridge firewalling registered
[ 17.620024] usb 1-1: new full speed USB device using ohci_hcd and address 6
[ 17.800034] usb 1-1: device descriptor read/64, error -62
[ 18.088053] usb 1-1: device descriptor read/64, error -62
[ 18.368803] usb 1-1: new full speed USB device using ohci_hcd and address 7
[ 18.548028] usb 1-1: device descriptor read/64, error -62
[ 18.837505] usb 1-1: device descriptor read/64, error -62
[ 19.104060] usb 1-1: new full speed USB device using ohci_hcd and address 8
[ 19.524026] usb 1-1: device not accepting address 8, error -62
[ 19.700151] usb 1-1: new full speed USB device using ohci_hcd and address 9
[ 20.109246] usb 1-1: device not accepting address 9, error -62
[ 20.109293] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 738.793985] usb 2-1.2: new full speed USB device using ohci_hcd and address 3
[ 738.946423] usb 2-1.2: configuration #1 chosen from 1 choice
[ 739.003996] Initializing USB Mass Storage driver...
[ 739.007206] scsi2 : SCSI emulation for USB Mass Storage devices
[ 739.007756] usbcore: registered new interface driver usb-storage
[ 739.007764] USB Mass Storage support registered.
[ 739.010823] usb-storage: device found at 3
[ 739.010829] usb-storage: waiting for device to settle before scanning
[ 744.010081] usb-storage: device scan complete
[ 744.017037] scsi 2:0:0:0: Direct-Access Kingston DataTraveler II+ PMAP PQ: 0 ANSI: 0 CCS
[ 744.489950] sd 2:0:0:0: [sdb] 2030592 512-byte hardware sectors: (1.03 GB/991 MiB)
[ 744.496972] sd 2:0:0:0: [sdb] Write Protect is off
[ 744.496982] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 744.496987] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 744.522904] sd 2:0:0:0: [sdb] 2030592 512-byte hardware sectors: (1.03 GB/991 MiB)
[ 744.529943] sd 2:0:0:0: [sdb] Write Protect is off
[ 744.529954] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 744.529958] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 744.529972] sdb: sdb1
[ 744.540691] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 744.540872] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 895.366547] usb 2-1.2: USB disconnect, address 3
[ 1174.746009] usb 2-1.2: new full speed USB device using ohci_hcd and address 4
[ 1174.898474] usb 2-1.2: configuration #1 chosen from 1 choice
[ 1174.944894] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1174.948857] usb-storage: device found at 4
[ 1174.948864] usb-storage: waiting for device to settle before scanning
[ 1179.950092] usb-storage: device scan complete
[ 1179.957049] scsi 3:0:0:0: Direct-Access Kingston DataTraveler II+ PMAP PQ: 0 ANSI: 0 CCS
[ 1180.383929] sd 3:0:0:0: [sdb] 2030592 512-byte hardware sectors: (1.03 GB/991 MiB)
[ 1180.390944] sd 3:0:0:0: [sdb] Write Protect is off
[ 1180.390954] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1180.390959] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1180.416929] sd 3:0:0:0: [sdb] 2030592 512-byte hardware sectors: (1.03 GB/991 MiB)
[ 1180.423927] sd 3:0:0:0: [sdb] Write Protect is off
[ 1180.423936] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1180.423940] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1180.423955] sdb: sdb1
[ 1180.439577] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1180.439732] sd 3:0:0:0: Attached scsi generic sg3 type 0
jan@desktop:~$
Téma: problem s UPC, Ubuntu 9.04 (Přečteno 3412 krát)
