Spojenie na internet cez usb modem o2 v 9.04 je spravne ... [vyriesene]

[Jan__]

Ahojte. Spojazdnujem USB modem (mobilny tel.)  pripojenie do o2 siete, po nakonfigurovani  v Aplet NetworkManager a kliknuti na profil pripojenia  system vypise hlasku o uspesnom pripojeni do siete a taktiez na displeji mobilu vypise hlasku o uspenom pripojeni potial je to ok.
Problem vznika  po spusteni firefoxu alebo ineho net prehliadaca po zdani lubovolnej adresy sa net stranka nenacita teda nezobrazi. Spojenie a konfiguraciu som skusil aj na notebooku kde mam Ubuntu 8.10 a  pracuje to bez problemov. Na dvoch pc kde mam 9.04 mam ten ist problem.
 Viete mi niekto poradit popripade na co sa mam zamerat? Dakujem   
 Ospravedlnujem sa za temu ktora je duplicitna ak sa to tu uz raz riesilo... mne sa akosi nepodarilo najst vhodnu temu riesenim mojho problemu 

[fish]

Už sa to rieši - pozri na http://forum.ubuntu.cz/index.php/topic,36689.msg278705.html#msg278705 a postni sem výpisy.
Mne O2-SK internet ide, používam wvdial a nie network manager.

[Jan__]

Postujem sem tie vypisy 

Pred pripojenim (pripojene ku sieti cez utp kabel):

Kód: [Vybrat]

jansmd@jansmd-desktop:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:21:85:99:2e:81 brd ff:ff:ff:ff:ff:ff
    inet 10.162.40.202/27 brd 10.162.40.223 scope global eth0
    inet6 fe80::221:85ff:fe99:2e81/64 scope link
       valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
    link/ether 16:c4:0b:07:ad:fa brd ff:ff:ff:ff:ff:ff
4: ham0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1200 qdisc pfifo_fast state UNKNOWN qlen 500
    link/ether f6:2f:19:0b:ca:28 brd ff:ff:ff:ff:ff:ff
    inet 5.192.90.139/8 brd 5.255.255.255 scope global ham0

Kód: [Vybrat]

jansmd@jansmd-desktop:~$ ip r
10.162.40.192/27 dev eth0  proto kernel  scope link  src 10.162.40.202  metric 1
169.254.0.0/16 dev eth0  scope link  metric 1000
5.0.0.0/8 dev ham0  proto kernel  scope link  src 5.192.90.139
default via 10.162.40.222 dev eth0  proto static

Kód: [Vybrat]

jansmd@jansmd-desktop:~$ cat /etc/resolv.conf
# Generated by NetworkManager
domain iptv.slovanet.sk
search iptv.slovanet.sk
nameserver 10.5.18.2
nameserver 195.80.171.4
nameserver 195.28.64.119

Po pripojeni mobilneho telefonu (utp kabel odpojeny):

Kód: [Vybrat]

jansmd@jansmd-desktop:~$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:21:85:99:2e:81 brd ff:ff:ff:ff:ff:ff
    inet6 fe80::221:85ff:fe99:2e81/64 scope link
       valid_lft forever preferred_lft forever
3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
    link/ether 16:c4:0b:07:ad:fa brd ff:ff:ff:ff:ff:ff
4: ham0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1200 qdisc pfifo_fast state UNKNOWN qlen 500
    link/ether f6:2f:19:0b:ca:28 brd ff:ff:ff:ff:ff:ff
    inet 5.192.90.139/8 brd 5.255.255.255 scope global ham0
6: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 3
    link/ppp
    inet 10.96.35.136 peer 10.64.64.64/32 brd 10.96.35.136 scope global ppp0

Kód: [Vybrat]

jansmd@jansmd-desktop:~$ ip r
10.64.64.64 dev ppp0  proto kernel  scope link  src 10.96.35.136
169.254.0.0/16 dev ppp0  scope link  metric 1000
5.0.0.0/8 dev ham0  proto kernel  scope link  src 5.192.90.139
default via 10.64.64.64 dev ppp0  proto static

Kód: [Vybrat]

jansmd@jansmd-desktop:~$ cat /etc/resolv.conf
# Generated by NetworkManager
nameserver 194.154.230.66
nameserver 194.154.230.74

Kód: [Vybrat]

jansmd@jansmd-desktop:~$ dmesg | tail
[  470.527173] ohci_hcd 0000:00:04.0: dma_pool_free buffer-2048, f5d75b00/35d75b00 (bad dma)
[  625.787034] eth0: link up.
[  774.102651] eth0: link down.
[  838.348026] usb 2-7: new full speed USB device using ohci_hcd and address 5
[  838.575415] usb 2-7: configuration #1 chosen from 1 choice
[  838.583470] cdc_acm 2-7:1.1: ttyACM0: USB ACM device
[  838.595268] cdc_acm 2-7:1.3: ttyACM1: USB ACM device
[  838.638114] cdc_wdm 2-7:1.7: cdc-wdm0: USB WDM device
[ 1176.155910] eth0: link up.
[ 1206.707101] eth0: link down.

Kód: [Vybrat]

jansmd@jansmd-desktop:~$ tail /var/log/messages
Aug  4 18:40:49 jansmd-desktop pppd[4277]: pppd 2.4.5 started by root, uid 0
Aug  4 18:40:49 jansmd-desktop pppd[4277]: Using interface ppp0
Aug  4 18:40:49 jansmd-desktop pppd[4277]: Connect: ppp0 <--> /dev/ttyACM0
Aug  4 18:40:50 jansmd-desktop pppd[4277]: Could not determine remote IP address: defaulting to 10.64.64.64
Aug  4 18:40:50 jansmd-desktop pppd[4277]: local  IP address 10.96.35.136
Aug  4 18:40:50 jansmd-desktop pppd[4277]: remote IP address 10.64.64.64
Aug  4 18:40:50 jansmd-desktop pppd[4277]: primary   DNS address 160.218.43.200
Aug  4 18:40:50 jansmd-desktop pppd[4277]: secondary DNS address 160.218.10.200
Aug  4 18:46:14 jansmd-desktop kernel: [ 1176.155910] eth0: link up.
Aug  4 18:46:45 jansmd-desktop kernel: [ 1206.707101] eth0: link down.
Zatial dakujem za prejavenu ochotu riesit problem 

[fish]

http://forum.ubuntu.cz/index.php/topic,36689.msg278728.html#msg278728 - Presne to isté riešenie.

[Jan__]

Vdaka za poradenie , uz to bezi. I ked stale treba nastavit tie ip ale to je v poho. Oznacujem za vyriesene.