Tripple view - nefunkcna Xinerama

[bajo]

Pozdravujem citajucich. Moj problem spociva v tom, ze pouzivam 3x lcd. Na kazdom si viem spustit aplikaciu, no nieje ju mozne presuvat na iny desktop (monitor). Po odfajknuti "enable Xinerama" sa Gnome nevie nastartovat a miesto logovacieho screenu to ustavicne len preblikava. Da sa to nejak spojazdnit? Aktualne pouzivam poslednu distribuciu 9.10 - Carmic Coala
Prikladam xorg.conf

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@crested)  Sun Feb  1 20:25:37 UTC 2009

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 1920 0
    Screen      1  "Screen1" RightOf "Screen0"
    Screen      2  "Screen2" LeftOf "Screen0"
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#    InputDevice    "Keyboard0" "CoreKeyboard"
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
#
#    # generated from default
#    Identifier     "Keyboard0"
#    Driver         "kbd"
#EndSection

# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
#
#    # generated from default
#    Identifier     "Mouse0"
#    Driver         "mouse"
#    Option         "Protocol" "auto"
#    Option         "Device" "/dev/psaux"
#    Option         "Emulate3Buttons" "no"
#    Option         "ZAxisMapping" "4 5"
#EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "DELL E248WFP"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "DELL E248WFP"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "DELL E248WFP"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
    Option         "NoLogo" "True"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9600 GT"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 9600 GT"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GS"
    BusID          "PCI:2:0:0"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-0: 1920x1200 +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 960x600 +0+0; DFP-0: 800x512 +0+0; DFP-0: 400x300 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "DFP-1: nvidia-auto-select +0+0; DFP-1: 800x512 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "nvidia-auto-select +0+0"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "nvidia-auto-select +0+0; 960x600 +0+0; 832x624 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Vdaka za kazdy dobry napad