nvidia fx5200 rozlišení pouze 640x480

[Tomik158]

Zdravim všechny a prosím o pomoc,
S linuxem teprve začínám tak se předem omlouvám za mé možna tupé dotazy.
Používám Ubuntu 9.10 a ovladače k nvidia grafice verze 173.
Včera vše fungovalo v pohodě, ale když jsem dneska pustil počítač, tak je zozlišení pouze 640x480. Systém nenapsal žádnou chybu, ani varování prostě nic.
Po marném snažení najit nějakou radu doufám v poslední záchranu tady na fóru.

[ladarozan]

Také jsem nějakou dobu zápasil s tímto jevem, na který má vliv nevhodný kabel mezi PC a monitorem. Instalace se vždy povedla a po restartu bylo malé rozlišení. Čili první možnost zkusit jiný kabel, pozor na redukce vga-dvi a podobně. To byl můj případ.

[Tomik158]

Omezené rozlišení se vyskytlo až po třech týdnech, do dneška vše fungovalo jak mělo.
Monitor mám Aoc 9k+ (postarší CRT  ) VGA kabel je v monitoru bohužel napevno, takže výměna kabelu moc nepřipadá v úvahu a redukci nepoužívám.
Ještě jsem zkoušel vypnou ruzne žrouty grafiky (compiz a spol) ale bez efektu.

[ladarozan]

Takže zbývá jedině laborovat se souborem xorg.conf. Leží v adresáři /etc/X11 a má několik forem - originál a zálohy. Někdy se daří prohlédnout obsah aktuálního (bude nápadně kratší) a vymazat, náhradu provést přejmenováním bývalé verze ze záloh (xorg.cong.backup) a restartovat.

[Tomik158]

Se souborem xorg.conf už jsem laboroval, ale taky nic.
Obsah aktuálního souboru je stejny jako v zálohách tedy:

Kód: [Vybrat]

Section "Screen"
Identifier "Default Screen"
Option "AddARGBGLXVisuals" "True"
DefaultDepth 24
EndSection

Section "Module"
Load "glx"
EndSection

Section "Device"
Identifier "Default Device"
Option "NoLogo" "True"
Driver "nvidia"
EndSection


[ladarozan]

Tak to je ten "hubenej". Zkusme reinstal xorgu:

Kód: [Vybrat]

sudo nvidia-xconfig

[Tomik158]

Bohužel je to bez efektu, pouze se generují další soubory xorg.conf_xconfig.20100201190612 a podobně. Všechny mají shodně 251B a obsahují to stejné jak jsem posílal dřív.
Hlavně nevím proč se to rozlišení najednou omezilo max na 640x480. Kdybych něco udělal a podelala se grafika, tak to pochopím a snažím se ten můj zásah nějak opravit, ale když se to rozhodí bez mého přičinění, tak ani nevím kde mám začít hledat nebo co opravovat 

[ladarozan]

A co tohle ?

Kód: [Vybrat]

sudo nvidia-settingsa když to nikam nepovede, zkusíme z nabídky nahoře - Systém- správa - hardware drivers ... jestli nabídne tabulku.

[Tomik158]

nvidia-settings spustí NVIDIA X Server setting, jenže tam jde vybrat mezi rozlišením 640x480 a 320x240, už jsem to parkrát prošel a nic jsem tam nenašel.
Ještě jsem zkoušl přepnout monitor z 24bit na 16bit, ale vyhodí to tohle když chci změny uložit
Failed to parse existing X config file '/etc/X11/xorg.conf'!

V ovladačích Hardware je výběr ze dvou
"Akcelerovaný ovladač grafických karet NVIDIA(verze 173)[Doporučeno]"
"Akcelerovaný ovladač grafických karet NVIDIA(verze 96)"
Jak jsem psal hned v dotazu tak používám ten první. Ovladače už jsem taky zkoušel přehodit na ten 96, ale bylo to bez efektu.

Jediné co jsem vygooglil, tak v xorg.conf přepsat driver z "nvidia" na "nv" to mělo ten efekt že po rebootu bylo max rozlišení 800x600, ale po dalším restartu bylo opět na 640x480.

[Hellvis]

Kód: [Vybrat]

## vypise dostupne mody
$ xrandr -q

## nastavi napr. output VGA na pozadovane rozliseni
$ xrandr --output VGA --mode 1280x1024
jinak zkus dodat vypis z "hwinfo --gfxcard", mozna budes muset doinstalovat hwinfo

[Tomik158]

Dostupné módy:

Kód: [Vybrat]

Screen 0: minimum 320 x 240, current 640 x 480, maximum 640 x 480
default connected 640x480+0+0 0mm x 0mm
   640x480        50.0*
   320x240        51.0

a odpověď na hwinfo

Kód: [Vybrat]

21: PCI 100.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.318]
  UDI: /org/freedesktop/Hal/devices/pci_10de_322
  Unique ID: VCu0.Hj+k_rvGEWB
  Parent ID: vSkL.uvrveDpO5n6
  SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "nVidia GeForce FX 5200 (0x0322)"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0322 "GeForce FX 5200 (0x0322)"
  Revision: 0xa1
  Driver: "nvidia"
  Driver Modules: "nvidia"
  Memory Range: 0xfd000000-0xfdffffff (rw,non-prefetchable)
  Memory Range: 0xe8000000-0xefffffff (rw,prefetchable)
  Memory Range: 0xfeae0000-0xfeafffff (ro,prefetchable,disabled)
  IRQ: 16 (315258 events)
  I/O Ports: 0x3c0-0x3df (rw)
  Module Alias: "pci:v000010DEd00000322sv00000000sd00000000bc03sc00i00"
  Driver Info #0:
    XFree86 v4 Server Module: nv
  Driver Info #1:
    XFree86 v4 Server Module: nvidia
    3D Support: yes
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #10 (PCI bridge)


[Hellvis]

to vypada, ze karta patrne *ohorela .. rekl bych, ze to neni softwarova pricina, takze toho s tim moc nenadelas .. muzes zkusit nejakou jinou livecd distribuci ..

ps. mozna to muze byt monitorem

[ladarozan]

Já bych ještě zkusil tohle ....

Kód: [Vybrat]

sudo apt-get install nvidia-glx nvidia-kernel-common
sudo nvidia-glx-config enable

[Tomik158]

wokna běží normálně 1280x1024 takže kartou ani monitorem to nebude

[Hellvis]

ukaz tedy /var/log/Xorg.0.log

[Tomik158]

Tady je.
Pro dnešek to balím, musím ráno do práce.
zatím dík za ochotu

Kód: [Vybrat]

X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux tom-desktop 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=1cd70d71-99b4-4118-9cf7-6095eed23fef ro quiet splash
Build Date: 14 November 2009  05:48:26PM
xorg-server 2:1.6.4-2ubuntu4.1 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb  1 23:05:57 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) |   |-->Device "Default Device"
(==) No monitor specified for screen "Default Screen".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0322:0000:0000 nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xfd000000/16777216, 0xe8000000/134217728, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module  173.14.20  Thu Jun 25 19:49:59 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  173.14.20  Thu Jun 25 19:28:52 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "True"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-0
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 (NV34) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.34.20.18.a5
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:1:0:0:
(--) NVIDIA(0):     CRT-0
(--) NVIDIA(0): CRT-0: 350.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(==) NVIDIA(0):
(==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) NVIDIA(0):     will be used as the requested mode.
(==) NVIDIA(0):
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "nvidia-auto-select"
(II) NVIDIA(0): Virtual screen size determined to be 640 x 480
(WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
(WW) NVIDIA(0):     from CRT-0's EDID.
(==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Power Button
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "cz,us"
(**) Option "xkb_variant" ","
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "cz,us"
(**) Option "xkb_variant" ","
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "cz,us"
(**) Option "xkb_variant" ","
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
(**) ImPS/2 Generic Wheel Mouse: always reports core events
(**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
(**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Generic Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Generic Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Generic Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.


[Tomik158]

Zatím se mi problém nepovedlo vyřešit.
Máte ještě nekdo nápad co s tím?

[ladarozan]

Jak dopladlo to, co jsem dal v odpovědi 12?

[Tomik158]

Bohužel bez efektu 

[ladarozan]

Tak to risknem, - posílám xorg.conf - nakopčete text a uložte jako  xorg.conf

Kód: [Vybrat]

Section "Files"
        FontPath        "/usr/share/X11/fonts/misc"
        FontPath        "/usr/share/X11/fonts/cyrillic"
        FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/share/X11/fonts/Type1"
        FontPath        "/usr/share/X11/fonts/CID"
        FontPath        "/usr/share/X11/fonts/100dpi"
        FontPath        "/usr/share/X11/fonts/75dpi"
        # paths to defoma fonts
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
        FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
        Load    "GLcore"
        Load    "i2c"
        Load    "bitmap"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "type1"
        Load    "vbe"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "gb"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "Emulate3Buttons"       "true"
        Option          "ZAxisMapping"          "4 5"
EndSection

Section "Device"
        Identifier      "NVIDIA Corporation NV34 [GeForce FX 5200]"
        Driver          "nvidia"
        BusID           "PCI:1:0:0"
        Option          "ConnectedMonitor"      "TV"
        Option          "TVStandard"            "PAL-I"
        Option          "TVOutFormat"           "COMPOSITE"
EndSection

Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
        HorizSync       12-21
        VertRefresh     49-51
        Modeline "720x576" 12.58 720 752 792 824 576 589 592 605 interlace
        Modeline "800x600" 14.50 800 832 880 912 600 614 617 631 interlace
        Modeline "1024x768" 23.77 1024 1056 1144 1176 768 785 789 807 interlace
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "NVIDIA Corporation NV34 [GeForce FX 5200]"
        Monitor         "Generic Monitor"
        DefaultDepth    24
        SubSection "Display"
                Depth           24
                Modes           "800x600"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
EndSection

Section "DRI"
        Mode    0666
EndSection


[Tomik158]

  Asi bylo předem jasné co se stane, ale zoufalé sitouce si žádají zoufalé činy 

[ladarozan]

No asi bude lepší koupit krapet mladší Nvidii a pořešit to takhle.