USB DVB TV - nefunkční

[Taby]

Zkoušel jsem dle tohoto návodu (http://forum.ubuntu.cz/index.php?topic=35002.0) nainstalovat usb tv, ale nezdařilo se.
Koffeine ho nedetekuje.
Mám usb tv s čipem af9015. 
Nevím, co mám poslat za výpis, aby můj dotaz byl jasnější, ale pokud bude někdo odhoten pmoci, budu rád.

[Jan__]

Skus to odznova  nainstalovat
Po kazdom prikaze hod sem aj vypis. Potom uvidime 

[ufaak]

zacal bych vypisy lsusb a dmesg. Pak uvidime co dal

[pavel81]

pokud máš DVB s čipem AF9015, tak potřebuješ firmware pro AF9015 a ne pro ec168. jinak výpis "dmesg" nám hodně pomůže. doporučuju nastartovat PC bez DVB donglu, poté zasunout dongle a potom v terminálu napsat dmesg at se v tom líp zorientujem.

[Taby]

Výpis lsusb je zde:

Kód: [Vybrat]

Bus 005 Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Výpis dmesg je v příloze

Jinak jsem použil firmware pro AF9015

[attachment deleted by admin]

[pavel81]

Jasne, ta tvoje TV karta ma tuner TDA18218, kterej neni ztim podporovanej, ale existuje na to driver.
Ten nainstalujes pomocí těchto příkazů:

sudo apt-get install mercurial linux-headers-$(uname -r) build-essential
hg clone -r 0f41fd7df85d http://linuxtv.org/hg/~anttip/af9015/
wget http://jusst.de/manu/fw/AFA/dvb-usb-af9015.fw_a-link
sudo mv dvb-usb-af9015.fw_a-link /lib/firmware/dvb-usb-af9015.fw
cd af9015
wget http://media.ubuntuusers.de/forum/attachments/2466878/af9015.patch
patch -p1 <af9015.patch
make
sed -i 's/CONFIG_DVB_FIREDTV=m/CONFIG_DVB_FIREDTV=n/' ./v4l/.config
make
sudo make install

A na závěr reboot a mělo by ti to fungovat.
make je tam dvakrát protože po tom prvním to nahlásí chybu.

[Taby]

Tak vše funguje. Díky.

Ještě nastavit Kaffeine a bude to.  

[pavel81]

Bezva. Můžeš toto vlákno označit za vyřešené?

[Roman Vacho]

Jasne, ta tvoje TV karta ma tuner TDA18218, kterej neni ztim podporovanej, ale existuje na to driver.
Ten nainstalujes pomocí těchto příkazů:

sudo apt-get install mercurial linux-headers-$(uname -r) build-essential
hg clone -r 0f41fd7df85d http://linuxtv.org/hg/~anttip/af9015/
wget http://jusst.de/manu/fw/AFA/dvb-usb-af9015.fw_a-link
sudo mv dvb-usb-af9015.fw_a-link /lib/firmware/dvb-usb-af9015.fw
cd af9015
wget http://media.ubuntuusers.de/forum/attachments/2466878/af9015.patch
patch -p1 <af9015.patch
make
sed -i 's/CONFIG_DVB_FIREDTV=m/CONFIG_DVB_FIREDTV=n/' ./v4l/.config
make
sudo make install

A na závěr reboot a mělo by ti to fungovat.
make je tam dvakrát protože po tom prvním to nahlásí chybu.

To by si zasloužilo dát na Wiki

[pavel81]

Souhlasím, jen musím překonat lenost  

[Taby]

Chci se zeptat na jednu věc.

Všechno běželo fajně, ale když jsem aktualizoval jádro, tak kaffeine přestal detekovat tuner (na tom nižším jádře to vše funguje).
Existuje na to nějaká vychytávka nebo budu muset při každém upgradu jádra také znovu procházet celým procesem instalace?

[pavel81]

existuje, neaktualizovat jádro
Jinak by možná stačilo zopakovat akorát make install, protože V4L drivery se neaktualizují.
Zkus to a dej vědět jestli to funguje.

[pavel81]

dobrá zpráva,
překonal jsem lenost a návod je na wiki

[conpet]

Mě se to nepodařilo rozjet podle tohoto návodu  

Kód: [Vybrat]

petr@petr-linux:~$ lsusb
Bus 009 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 002: ID 13b1:000b Linksys WUSB11 v4.0 802.11b Adapter
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 093a:2460 Pixart Imaging, Inc. Q-TEC WEBCAM 100
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 1726:1000 Axesstel, Inc. wireless modem
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
petr@petr-linux:~$


[pavel81]

Návod jsem psal tuším pro ubuntu 10.04. Přiznávám že v 10.10 jsem jej nezkoušel, ale dobrá zpráva je že v příštím vydání ubuntu 11.04 by měl být ovladač už v jádře
Nicméně chápu že čekat na další verzi se Ti nechce, tak pro začátek napiš do Ti to vypisuje po řekladu a co ti to vypíše když připojíš dongle a zadáš "dmesg" ať se máme od čeho odrazit.

[conpet]

Výpis :

Kód: [Vybrat]

   0.050937] pci 0000:00:0b.2: reg 10: [mem 0xcfffde00-0xcfffdeff]
[    0.050979] pci 0000:00:0b.2: supports D1 D2
[    0.050982] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.050987] pci 0000:00:0b.2: PME# disabled
[    0.051022] pci 0000:00:0f.0: reg 10: [io  0xd400-0xd43f]
[    0.051049] pci 0000:00:0f.0: reg 30: [mem 0xcffe0000-0xcffeffff pref]
[    0.051086] pci 0000:00:11.0: reg 10: [io  0xd000-0xd0ff]
[    0.051129] pci 0000:00:11.0: supports D1 D2
[    0.051192] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
[    0.051199] pci 0000:01:00.0: reg 14: [io  0xa800-0xa8ff]
[    0.051206] pci 0000:01:00.0: reg 18: [mem 0xcfef0000-0xcfefffff]
[    0.051224] pci 0000:01:00.0: reg 30: [mem 0xcfec0000-0xcfedffff pref]
[    0.051245] pci 0000:01:00.0: supports D1 D2
[    0.051275] pci 0000:01:00.1: reg 10: [mem 0xb8000000-0xbfffffff pref]
[    0.051282] pci 0000:01:00.1: reg 14: [mem 0xcfee0000-0xcfeeffff]
[    0.051316] pci 0000:01:00.1: supports D1 D2
[    0.051358] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.051364] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.051370] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.051376] pci 0000:00:01.0:   bridge window [mem 0xafc00000-0xcfcfffff pref]
[    0.051386] pci_bus 0000:00: on NUMA node 0
[    0.051391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.053710] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[    0.053844] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.053975] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.054104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.054233] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.054363] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.054492] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.054622] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
[    0.054676] HEST: Table is not found!
[    0.054846] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.054851] vgaarb: loaded
[    0.055153] SCSI subsystem initialized
[    0.055316] libata version 3.00 loaded.
[    0.055418] usbcore: registered new interface driver usbfs
[    0.055438] usbcore: registered new interface driver hub
[    0.055489] usbcore: registered new device driver usb
[    0.055729] ACPI: WMI: Mapper loaded
[    0.055732] PCI: Using ACPI for IRQ routing
[    0.055740] PCI: pci_cache_line_size set to 32 bytes
[    0.055825] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[    0.055831] reserve RAM buffer: 000000001fff0000 - 000000001fffffff
[    0.056043] NetLabel: Initializing
[    0.056046] NetLabel:  domain hash size = 128
[    0.056049] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.056074] NetLabel:  unlabeled traffic allowed by default
[    0.056156] Switching to clocksource tsc
[    0.073800] AppArmor: AppArmor Filesystem Enabled
[    0.073846] pnp: PnP ACPI init
[    0.073890] ACPI: bus type pnp registered
[    0.074376] ERROR: Unable to locate IOAPIC for GSI 8
[    0.074470] ERROR: Unable to locate IOAPIC for GSI 13
[    0.074584] ERROR: Unable to locate IOAPIC for GSI 12
[    0.074629] ERROR: Unable to locate IOAPIC for GSI 1
[    0.074884] ERROR: Unable to locate IOAPIC for GSI 6
[    0.075469] ERROR: Unable to locate IOAPIC for GSI 4
[    0.076083] ERROR: Unable to locate IOAPIC for GSI 3
[    0.076847] ERROR: Unable to locate IOAPIC for GSI 7
[    0.077955] ERROR: Unable to locate IOAPIC for GSI 10
[    0.078345] pnp: PnP ACPI: found 13 devices
[    0.078348] ACPI: ACPI bus type pnp unregistered
[    0.078356] PnPBIOS: Disabled by ACPI PNP
[    0.115314] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.115324] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.115333] pci 0000:00:01.0:   bridge window [mem 0xcfe00000-0xcfefffff]
[    0.115340] pci 0000:00:01.0:   bridge window [mem 0xafc00000-0xcfcfffff pref]
[    0.115360] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.115364] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.115368] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.115372] pci_bus 0000:01: resource 1 [mem 0xcfe00000-0xcfefffff]
[    0.115375] pci_bus 0000:01: resource 2 [mem 0xafc00000-0xcfcfffff pref]
[    0.115464] NET: Registered protocol family 2
[    0.115571] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.115915] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.116233] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.116515] TCP: Hash tables configured (established 16384 bind 16384)
[    0.116520] TCP reno registered
[    0.116525] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.116546] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.116702] NET: Registered protocol family 1
[    0.116913] pci 0000:01:00.0: Boot video device
[    0.116920] PCI: CLS 32 bytes, default 32
[    0.117337] cpufreq-nforce2: No nForce2 chipset.
[    0.117380] Scanning for low memory corruption every 60 seconds
[    0.117570] audit: initializing netlink socket (disabled)
[    0.117595] type=2000 audit(1292423584.112:1): initialized
[    0.130332] Trying to unpack rootfs image as initramfs...
[    0.144249] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.156362] VFS: Disk quotas dquot_6.5.2
[    0.156564] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.157610] fuse init (API version 7.14)
[    0.157748] msgmni has been set to 971
[    0.158694] modprobe[32]: segfault at 4 ip 004de6f6 sp bf89d9a8 error 4 in ld-linux.so.2[4cf000+1c000]
[    0.164588] modprobe[34]: segfault at 4 ip 00b4e6f6 sp bff8a548 error 4 in ld-linux.so.2[b3f000+1c000]
[    0.164923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.164928] io scheduler noop registered
[    0.164931] io scheduler deadline registered
[    0.164948] io scheduler cfq registered (default)
[    0.165156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.165193] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.165517] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.165538] ACPI: Sleep Button [SLPB]
[    0.165611] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.165616] ACPI: Power Button [PWRF]
[    0.165751] ACPI: acpi_idle registered with cpuidle
[    0.168560] ERST: Table is not found!
[    0.168940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.169092] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.169229] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.169621] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.169788] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.171675] brd: module loaded
[    0.175969] isapnp: Scanning for PnP cards...
[    0.182362] loop: module loaded
[    0.182837] pata_sis 0000:00:02.5: version 0.5.2
[    0.188197] scsi0 : pata_sis
[    0.231994] scsi1 : pata_sis
[    0.233112] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    0.233118] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    0.233720] Fixed MDIO Bus: probed
[    0.233780] PPP generic driver version 2.4.2
[    0.233930] tun: Universal TUN/TAP device driver, 1.6
[    0.233933] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.234099] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.234359] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[    0.234364] PCI: setting IRQ 5 as level-triggered
[    0.234371] ehci_hcd 0000:00:09.3: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
[    0.234409] ehci_hcd 0000:00:09.3: EHCI Host Controller
[    0.234483] ehci_hcd 0000:00:09.3: new USB bus registered, assigned bus number 1
[    0.234538] ehci_hcd 0000:00:09.3: debug port 1
[    0.256073] ehci_hcd 0000:00:09.3: irq 5, io mem 0xcfffdf00
[    0.267958] ehci_hcd 0000:00:09.3: USB 2.0 started, EHCI 1.00
[    0.268289] hub 1-0:1.0: USB hub found
[    0.268301] hub 1-0:1.0: 6 ports detected
[    0.268750] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.268755] PCI: setting IRQ 11 as level-triggered
[    0.268762] ehci_hcd 0000:00:0b.2: PCI INT C -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    0.268801] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[    0.268883] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 2
[    0.268961] ehci_hcd 0000:00:0b.2: irq 11, io mem 0xcfffde00
[    0.280221] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
[    0.280566] hub 2-0:1.0: USB hub found
[    0.280578] hub 2-0:1.0: 4 ports detected
[    0.280703] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.280749] ohci_hcd 0000:00:02.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    0.280788] ohci_hcd 0000:00:02.2: OHCI Host Controller
[    0.280859] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[    0.280899] ohci_hcd 0000:00:02.2: irq 11, io mem 0xcfffe000
[    0.338210] hub 3-0:1.0: USB hub found
[    0.338225] hub 3-0:1.0: 3 ports detected
[    0.338662] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[    0.338670] ohci_hcd 0000:00:02.3: PCI INT A -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[    0.338709] ohci_hcd 0000:00:02.3: OHCI Host Controller
[    0.338787] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 4
[    0.338826] ohci_hcd 0000:00:02.3: irq 11, io mem 0xcffff000
[    0.417805] hub 4-0:1.0: USB hub found
[    0.417820] hub 4-0:1.0: 3 ports detected
[    0.418230] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.418238] ohci_hcd 0000:00:09.0: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.418277] ohci_hcd 0000:00:09.0: OHCI Host Controller
[    0.418351] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 5
[    0.418392] ohci_hcd 0000:00:09.0: irq 11, io mem 0xcfffa000
[    0.505911] hub 5-0:1.0: USB hub found
[    0.505927] hub 5-0:1.0: 2 ports detected
[    0.506360] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.506369] ohci_hcd 0000:00:09.1: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    0.506407] ohci_hcd 0000:00:09.1: OHCI Host Controller
[    0.506487] ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 6
[    0.506530] ohci_hcd 0000:00:09.1: irq 11, io mem 0xcfffb000
[    0.506560] ata1.00: ATA-7: ST3160812A, 3.AAE, max UDMA/100
[    0.506564] ata1.00: 312581808 sectors, multi 16: LBA48
[    0.595778] ata1.00: configured for UDMA/100
[    0.598156] hub 6-0:1.0: USB hub found
[    0.598170] hub 6-0:1.0: 2 ports detected
[    0.598307] ohci_hcd 0000:00:09.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    0.598348] ohci_hcd 0000:00:09.2: OHCI Host Controller
[    0.598424] ohci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 7
[    0.598467] ohci_hcd 0000:00:09.2: irq 11, io mem 0xcfffc000
[    0.689797] hub 7-0:1.0: USB hub found
[    0.689813] hub 7-0:1.0: 2 ports detected
[    0.689933] uhci_hcd: USB Universal Host Controller Interface driver
[    0.690050] uhci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[    0.690065] uhci_hcd 0000:00:0b.0: UHCI Host Controller
[    0.690147] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 8
[    0.690187] uhci_hcd 0000:00:0b.0: irq 11, io base 0x0000d800
[    0.690397] hub 8-0:1.0: USB hub found
[    0.690405] hub 8-0:1.0: 2 ports detected
[    0.690481] uhci_hcd 0000:00:0b.1: PCI INT B -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[    0.690491] uhci_hcd 0000:00:0b.1: UHCI Host Controller
[    0.690563] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 9
[    0.690592] uhci_hcd 0000:00:0b.1: irq 11, io base 0x0000dc00
[    0.690777] hub 9-0:1.0: USB hub found
[    0.690784] hub 9-0:1.0: 2 ports detected
[    0.690952] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    0.691302] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.691324] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.691596] mice: PS/2 mouse device common for all mice
[    0.694968] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.695003] rtc0: alarms up to one month, 114 bytes nvram
[    0.695253] device-mapper: uevent: version 1.0.3
[    0.699003] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.701943] device-mapper: multipath: version 1.1.1 loaded
[    0.701954] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.704639] EISA: Probing bus 0 at eisa.0
[    0.704686] EISA: Detected 0 cards.
[    0.710371] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.710555] cpuidle: using governor ladder
[    0.710558] cpuidle: using governor menu
[    0.711047] TCP cubic registered
[    0.711298] NET: Registered protocol family 10
[    0.711807] lo: Disabled Privacy Extensions
[    0.712136] NET: Registered protocol family 17
[    0.712205] powernow-k8: Processor cpuid 662 not supported
[    0.712244] Using IPI No-Shortcut mode
[    0.712415] PM: Resume from disk failed.
[    0.712445] registered taskstats version 1
[    0.712737]   Magic number: 6:677:586
[    0.712913] rtc_cmos 00:02: setting system clock to 2010-12-15 14:33:05 UTC (1292423585)
[    0.712918] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.712920] EDD information not available.
[    0.867493] isapnp: No Plug & Play device found
[    0.867873] scsi 0:0:0:0: Direct-Access     ATA      ST3160812A       3.AA PQ: 0 ANSI: 5
[    0.868221] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.868505] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    0.868604] sd 0:0:0:0: [sda] Write Protect is off
[    0.868609] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.868652] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.868934]  sda: sda1 sda2 < sda5 sda6 sda7 >
[    0.942728] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.948952] Freeing initrd memory: 10508k freed
[    1.048390] ata2.00: ATAPI: ATAPI   DVD A  DH20A4P, 9P54, max UDMA/66
[    1.080250] ata2.00: configured for UDMA/66
[    1.082057] scsi 1:0:0:0: CD-ROM            ATAPI    DVD A  DH20A4P   9P54 PQ: 0 ANSI: 5
[    1.086248] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.086254] Uniform CD-ROM driver Revision: 3.20
[    1.086477] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.086595] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.086699] Freeing unused kernel memory: 684k freed
[    1.088253] usb 2-3: new high speed USB device using ehci_hcd and address 3
[    1.088342] Write protecting the kernel text: 4932k
[    1.088385] Write protecting the kernel read-only data: 1976k
[    1.131409] udev[67]: starting version 163
[    1.532187] usb 6-2: new full speed USB device using ohci_hcd and address 2
[    1.559362] Floppy drive(s): fd0 is 1.44M
[    1.601728] 3c59x 0000:00:0f.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[    1.601738] 3c59x: Donald Becker and others.
[    1.601754] 0000:00:0f.0: 3Com PCI 3c905 Boomerang 100baseTx at 0001d400.
[    1.624052] usbcore: registered new interface driver hiddev
[    1.630407] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 16 -> 8
[    1.633608] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:0b.2/usb2/2-3/2-3:1.1/input/input3
[    1.633854] generic-usb 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:0b.2-3/input1
[    1.633892] usbcore: registered new interface driver usbhid
[    1.633896] usbhid: USB HID core driver
[    1.637265] FDC 0 is a post-1991 82077
[    1.951229] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    1.957083] usb 7-2: new full speed USB device using ohci_hcd and address 2
[    2.496083] usb 8-1: new full speed USB device using uhci_hcd and address 2
[    2.912071] usb 9-2: new full speed USB device using uhci_hcd and address 2
[   13.850778] Adding 979964k swap on /dev/sda7.  Priority:-1 extents:1 across:979964k
[   14.054920] udev[288]: starting version 163
[   14.202124] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   14.254798] lp: driver loaded but no devices found
[   14.335030] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[   14.335046] ACPI: resource 0000:00:02.1 [io  0x0c00-0x0c1f] conflicts with ACPI region SMRG [??? 0x00000c00-0x00000c1f flags 0x47]
[   14.335051] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   14.335783] sis630_smbus 0000:00:02.0: SIS630 comp. bus not detected, module not inserted.
[   14.415304] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.536281] Linux agpgart interface v0.103
[   14.856317] agpgart-sis 0000:00:00.0: SiS chipset [1039/0735]
[   15.008717] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xd0000000
[   15.090749] Disabling lock debugging due to kernel taint
[   15.147948] type=1400 audit(1292419999.927:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=461 comm="apparmor_parser"
[   15.232770] psmouse serio1: ID: 10 00 64
[   15.280964] type=1400 audit(1292420000.063:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=461 comm="apparmor_parser"
[   15.281278] type=1400 audit(1292420000.063:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=461 comm="apparmor_parser"
[   15.311380] Linux video capture interface: v2.00
[   15.311388] WARNING: You're using an experimental version of the V4L stack. As the driver
[   15.311390]          is backported to an older kernel, it doesn't offer enough quality for
[   15.311393]          its usage in production.
[   15.311394]          Use it with care.
[   15.349278] usbcore: registered new interface driver usbserial
[   15.349305] USB Serial support registered for generic
[   15.349428] usbcore: registered new interface driver usbserial_generic
[   15.349432] usbserial: USB Serial Driver core
[   15.359606] parport_pc 00:0a: reported by Plug and Play ACPI
[   15.359686] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   15.508316] gspca: main v2.9.0 registered
[   15.510503] gspca: probing 093a:2460
[   15.510601] lp0: using parport0 (interrupt-driven).
[   15.617759] pac207: Pixart Sensor ID 0x27 Chips ID 0x00
[   15.617764] pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2460)
[   15.625240] input: pac207 as /devices/pci0000:00/0000:00:09.2/usb7/7-2/input/input4
[   15.625445] gspca: video0 created
[   15.625451] gspca: found int in endpoint: 0x83, buffer_len=2, interval=50
[   15.625515] usbcore: registered new interface driver pac207
[   15.625518] pac207: registered
[   15.635609] USB Serial support registered for GSM modem (1-port)
[   15.635793] option 6-2:1.0: GSM modem (1-port) converter detected
[   15.636107] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB0
[   15.636136] option 6-2:1.1: GSM modem (1-port) converter detected
[   15.636240] usb 6-2: GSM modem (1-port) converter now attached to ttyUSB1
[   15.636329] usbcore: registered new interface driver option
[   15.636332] option: v0.7.2:USB Driver for GSM modems
[   15.647175] ndiswrapper version 1.56 loaded (smp=yes, preempt=no)
[   15.648381] Bluetooth: Core ver 2.15
[   15.648444] NET: Registered protocol family 31
[   15.648447] Bluetooth: HCI device and connection manager initialized
[   15.648453] Bluetooth: HCI socket layer initialized
[   15.651728] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   15.661271] WARNING: You're using an experimental version of the DVB stack. As the driver
[   15.661275]          is backported to an older kernel, it doesn't offer enough quality for
[   15.661277]          its usage in production.
[   15.661279]          Use it with care.
[   15.713615] usbcore: registered new interface driver btusb
[   15.750161] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   15.912242] gameport gameport0: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x201, speed 641kHz
[   15.928619] ppdev: user-space parallel port driver
[   16.059555] [drm] Initialized drm 1.1.0 20060810
[   16.332425] af9015: tuner id:177 not supported, please report!
[   16.332569] usbcore: registered new interface driver dvb_usb_af9015
[   16.588480] usb 8-1: reset full speed USB device using uhci_hcd and address 2
[   16.758150] C-Media PCI 0000:00:11.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[   16.956445] ndiswrapper: driver wusb11v4 (Cisco-Linksys LLC.,05/13/2004, 3.110.0513.2004) loaded
[   17.000448] [drm] radeon defaulting to kernel modesetting.
[   17.000458] [drm] radeon kernel modesetting enabled.
[   17.000600] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 5 (level, low) -> IRQ 5
[   17.077606] [drm] initializing kernel modesetting (RV280 0x1002:0x5961).
[   17.109729] [drm] register mmio base: 0xCFEF0000
[   17.109737] [drm] register mmio size: 65536
[   17.110142] agpgart-sis 0000:00:00.0: AGP 2.0 bridge
[   17.110175] agpgart-sis 0000:00:00.0: putting AGP V2 device into 4x mode
[   17.110258] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[   17.110270] radeon 0000:01:00.0: GTT: 64M 0xD0000000 - 0xD3FFFFFF
[   17.110276] [drm] Generation 2 PCI interface, using max accessible memory
[   17.110283] radeon 0000:01:00.0: VRAM: 128M 0xC0000000 - 0xC7FFFFFF (128M used)
[   17.110327] [drm] radeon: irq initialized.
[   17.110560] [drm] Detected VRAM RAM=128M, BAR=128M
[   17.110570] [drm] RAM width 128bits DDR
[   17.143305] [TTM] Zone  kernel: Available graphics memory: 254242 kiB.
[   17.143313] [TTM] Initializing pool allocator.
[   17.143361] [drm] radeon: 128M of VRAM memory ready
[   17.143364] [drm] radeon: 64M of GTT memory ready.
[   17.143568] [drm] Loading R200 Microcode
[   17.183299] [drm] radeon: ring at 0x00000000D0000000
[   17.183327] [drm] ring test succeeded in 1 usecs
[   17.183775] [drm] radeon: ib pool ready.
[   17.183939] [drm] ib test succeeded in 0 usecs
[   17.186918] [drm] Default TV standard: PAL
[   17.186925] [drm] 27.000000000 MHz TV ref clk
[   17.186932] [drm] DFP table revision: 4
[   17.188229] [drm] Default TV standard: PAL
[   17.188236] [drm] 27.000000000 MHz TV ref clk
[   17.188473] [drm] Radeon Display Connectors
[   17.188476] [drm] Connector 0:
[   17.188479] [drm]   VGA
[   17.188484] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   17.188486] [drm]   Encoders:
[   17.188489] [drm]     CRT1: INTERNAL_DAC1
[   17.188491] [drm] Connector 1:
[   17.188493] [drm]   DVI-I
[   17.188495] [drm]   HPD1
[   17.188499] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   17.188516] [drm]   Encoders:
[   17.188518] [drm]     CRT2: INTERNAL_DAC2
[   17.188521] [drm]     DFP1: INTERNAL_TMDS1
[   17.188523] [drm] Connector 2:
[   17.188525] [drm]   S-video
[   17.188527] [drm]   Encoders:
[   17.188529] [drm]     TV1: INTERNAL_DAC2
[   17.309971] type=1400 audit(1292420002.091:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=795 comm="apparmor_parser"
[   17.331297] type=1400 audit(1292420002.111:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=799 comm="apparmor_parser"
[   17.331771] type=1400 audit(1292420002.111:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=799 comm="apparmor_parser"
[   17.359419] type=1400 audit(1292420002.139:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=799 comm="apparmor_parser"
[   17.456946] type=1400 audit(1292420002.239:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=805 comm="apparmor_parser"
[   17.522663] type=1400 audit(1292420002.303:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=805 comm="apparmor_parser"
[   17.531171] eth0:  setting full-duplex.
[   17.537728] type=1400 audit(1292420002.319:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=805 comm="apparmor_parser"
[   17.777760] [drm] fb mappable at 0xC0040000
[   17.777769] [drm] vram apper at 0xC0000000
[   17.777772] [drm] size 3145728
[   17.777775] [drm] fb depth is 24
[   17.777777] [drm]    pitch is 4096
[   17.863622] wlan0: ethernet device 00:0f:66:f0:1e:95 using NDIS driver: wusb11v4, version: 0x36e, NDIS version: 0x501, vendor: 'M4301 NDIS Miniport Driver', 13B1:000B.F.conf
[   17.865259] ndiswrapper (set_iw_encr_mode:708): setting encryption mode to 6 failed (C00000BB)
[   17.866804] wlan0: encryption modes supported: WEP; TKIP with WPA
[   17.887342] usbcore: registered new interface driver ndiswrapper
[   17.891580] Console: switching to colour frame buffer device 128x48
[   17.906194] fb0: radeondrmfb frame buffer device
[   17.906198] drm: registered panic notifier
[   17.939540] Slow work thread pool: Starting up
[   17.949532] Slow work thread pool: Ready
[   17.949564] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[   18.752336] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.833129] nf_conntrack version 0.5.0 (7945 buckets, 31780 max)
[   18.838587] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   18.838599] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   18.838602] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   19.773042] Bluetooth: L2CAP ver 2.14
[   19.773054] Bluetooth: L2CAP socket layer initialized
[   19.817611] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   19.817622] Bluetooth: BNEP filters: protocol multicast
[   19.855616] Bluetooth: SCO (Voice Link) ver 0.6
[   19.855627] Bluetooth: SCO socket layer initialized
[   19.999681] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.028634] ndiswrapper (iw_set_ap_address:566): setting AP mac address failed (C0000001)
[   20.053006] Bluetooth: RFCOMM TTY layer initialized
[   20.053026] Bluetooth: RFCOMM socket layer initialized
[   20.053030] Bluetooth: RFCOMM ver 1.11
[   22.928449] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[   25.388119] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[   28.288021] eth0: no IPv6 routers present
[   34.755150] PPP BSD Compression module registered
[   34.765769] PPP Deflate Compression module registered
[ 5871.900083] usb 2-2: new high speed USB device using ehci_hcd and address 5
[ 5872.069807] WARNING! power/level is deprecated; use power/control instead
[ 5872.589616] usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04A9 pid 0x173A
[ 5872.589663] usbcore: registered new interface driver usblp
[ 5873.863029] audit_printk_skb: 12 callbacks suppressed
[ 5873.863037] type=1400 audit(1292425857.984:16): apparmor="DENIED" operation="open" parent=2079 profile="/usr/sbin/cupsd" name="/dev/ttyUSB0" pid=2081 comm="serial" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[ 5873.863075] type=1400 audit(1292425857.984:17): apparmor="DENIED" operation="open" parent=2079 profile="/usr/sbin/cupsd" name="/dev/ttyUSB1" pid=2081 comm="serial" requested_mask="w" denied_mask="w" fsuid=0 ouid=0
[ 5873.941084] usb 2-2: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 6038.514034] usb 2-2: USB disconnect, address 5
[ 6038.514371] usblp0: removed
petr@petr-linux:~$


[pavel81]

Tak to ti asi nepomůžu. Tvůj tuner má id:177 a návod je psaný pro id:179. Je mi líto.