Špatné rozlišení širokoúhlého monitoru [vyřešeno]

[Taby]

Hledal jsem odpověď na fóru, ale prozatím neúspěšně, proto jsem založil nové téma.
Nainstaloval jsem Ubuntu a podle tohoto článku jsem změnil sources.list, aktualizoval jádro a nastavil monitor (grafiku mám integrovanou intel 915G, tak jsem ji neupravoval). Jinak mám LCD LG 194WT 19".
Zde je výpis z xorg.conf:

Kód: [Vybrat]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
Identifier "Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Section "Monitor"
Identifier "L194WT"
Option "DPMS"
        HorizSync       30-83
        VertRefresh     56-75
        # 1440x900 @ 75.00 Hz (GTF) hsync: 70.50 kHz; pclk: 136.49 MHz
        Modeline "1440x900_75.00"  136.49  1440 1536 1688 1936  900 901 904 940  -HSync +Vsync
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller"
Monitor "L194WT"
DefaultDepth 24
        SubSection "Display"
                Depth           24
                Modes           "1440x900_75.00"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice     "stylus" "SendCoreEvents"
InputDevice     "cursor" "SendCoreEvents"
InputDevice     "eraser" "SendCoreEvents"
EndSection

Section "DRI"
Mode 0666
EndSectionVýsledek je ten, že jsem požadované rozlišení do nabídky "Systém -> Volby -> Rozlišení obrazovky" nedostal, ale k těm stávajícím, které jsem tam měl (určené pro poměr obrazovky 4:3) přibylo ještě jedno: 1920 x 1440, ale to, co jsem napsal do xorg.conf. Tam ani zdaleka není.
Napadá mě, že to bude asi integrovanou grafikou, ale vůbec netuším, jak na to.

[LS]

Hledejte 915resolution.

[Taby]

Cená rada nad zlato! :cool:
Dík. 915resolution byla správná volba.