Nazdar,
googloval som, cumel som na rozdne vlakna, mno nic mne vhodne som nenasiel. Dost delikatny problem (nie je priliz zavazny)
Kedze nemam moc cas hrat gamesy ani som to nepostrehol kedy sa to vlastne stalo, ale dosiel som na to az pri warcraft 3 vcera (cez cedegu)
myslel som ze je to problem cedegy (1024x768x32 na 40-100 fps, podla zatazenia). Obcasne, mozno kazdych 20 sec mi hra na milisekundu sekne (nic vazne, da sa na to zvyknut)
Isiel som robit testy native hier (doomsday, doom3) avsak to iste.... ked som sa *censored* spustil som glxgears.... a to by uz fakt seknut nemalo.
Nvidia driver version : 1.0-9746 (cez envy)
Takze skoda slov, vypisi detaily :
uname -a
Linux fatbastard 2.6.15-27-386 #1 PREEMPT Fri Dec 8 17:51:56 UTC 2006 i686 GNU/Linux
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 75
model name : AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
stepping : 2
cpu MHz : 1200.105
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy
bogomips : 2402.08
free -m
total used free shared buffers cached
Mem: 2027 1022 1005 0 44 700
-/+ buffers/cache: 277 1750
Swap: 580 0 580
uptime
12:35:41 up 1:26, 2 users, load average: 0.14, 0.27, 0.36
cat /proc/interrupts
CPU0
0: 1373953 XT-PIC timer
1: 12216 XT-PIC i8042
2: 0 XT-PIC cascade
5: 36103 XT-PIC libata, EMU10K1
7: 10 XT-PIC parport0
8: 0 XT-PIC rtc
9: 0 XT-PIC acpi
10: 611643 XT-PIC libata, libata, ohci_hcd:usb1, eth0, nvidia
11: 2 XT-PIC ehci_hcd:usb2
14: 95261 XT-PIC ide0
NMI: 0
LOC: 1373717
ERR: 2
MIS: 0
lspci | grep nVidia
0000:00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
0000:00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
0000:00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
0000:00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
0000:00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
0000:00:05.0 RAID bus controller: nVidia Corporation MCP55 SATA Controller (rev a2)
0000:00:05.1 RAID bus controller: nVidia Corporation MCP55 SATA Controller (rev a2)
0000:00:05.2 RAID bus controller: nVidia Corporation MCP55 SATA Controller (rev a2)
0000:00:06.0 PCI bridge: nVidia Corporation: Unknown device 0370 (rev a2)
0000:00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 0374 (rev a2)
0000:00:0c.0 PCI bridge: nVidia Corporation: Unknown device 0374 (rev a2)
0000:00:0d.0 PCI bridge: nVidia Corporation: Unknown device 0378 (rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 0375 (rev a2)
0000:00:0f.0 PCI bridge: nVidia Corporation: Unknown device 0377 (rev a2)
0000:06:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0392 (rev a1)
cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Fri Dec 15 10:12:14 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
glxgears -printfps
26434 frames in 5.0 seconds = 5286.784 FPS
27415 frames in 5.0 seconds = 5482.874 FPS
27453 frames in 5.0 seconds = 5490.501 FPS
27355 frames in 5.0 seconds = 5470.915 FPS
26719 frames in 5.0 seconds = 5343.702 FPS
27247 frames in 5.0 seconds = 5449.366 FPS
* poznamka, v case testu bezal firefox, gaim2, gnome
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Generic Monitor"
VendorName "Unknown"
ModelName "PHILIPS 107X4"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NVIDIA Default Card"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NVIDIA Default Card"
Monitor "Generic Monitor"
DefaultDepth 24
Option "metamodes" "CRT: 1024x768_85 +0+0; CRT: 1024x768 +0+0; CRT: 832x624 +0+0; CRT: 800x600 +0+0; CRT: 720x400 +0+0; CRT: 640x480 +0+0; CRT: 640x350 +0+0"
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
Dufam ze pomoze a na nieco prideme....