Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Nerozpoznaná gk  (Přečteno 2088 krát)

mrkrenek

  • Aktivní člen
  • *
  • Příspěvků: 215
Nerozpoznaná gk
« kdy: 31 Března 2012, 17:39:20 »
Chtěl bych se poradit ohledně grafické karty v notebooku nc6120 od HP.
Předtím jsem tam měl 1x ubuntu a pak mint a vždy to grafiku po čase detekovalo, ale teďka jsem zase na 11.10 a po měsící mi to pořád grafiku nerozpoznalo. Mohu mu nějak v tom pomoct ?
Grafika je integrovaná.. díky ;)

Rover623

Re:Nerozpoznaná gk
« Odpověď #1 kdy: 31 Března 2012, 18:07:21 »
Dej sem výpis příkazu
Kód: [Vybrat]
lspci

mrkrenek

  • Aktivní člen
  • *
  • Příspěvků: 215
Re:Nerozpoznaná gk
« Odpověď #2 kdy: 31 Března 2012, 18:46:12 »
Kód: [Vybrat]
honza@honza-HP-Compaq-nc6120-PY507EA-AKB:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
02:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:06.1 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
02:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
02:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
02:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
02:06.5 Communication controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Smart Card Controller
02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)
honza@honza-HP-Compaq-nc6120-PY507EA-AKB:~$
Tady jí to evidentně rozpoznalo, ale v systémovém info je napsáno "neznámá"

sabraq

  • Závislák
  • ***
  • Příspěvků: 3448
  • Bootloader-není téma k hovoru,ani zbytný prostor
Re:Nerozpoznaná gk
« Odpověď #3 kdy: 31 Března 2012, 19:35:08 »
A ještě obsah /var/log/Xorg.0.log
PP v kolečku - není licence,pouze upozornění na reklamu
"Dress code" - oblečení podle předpisu(ne kódované oblečení)
CC v kolečku - je licence,značí,že se někdo nesmírně snaží

Rover623

Re:Nerozpoznaná gk
« Odpověď #4 kdy: 31 Března 2012, 19:59:52 »
Funguje ti akcelerace, nejlepší test bude asi ExtremeTuxRacer

mrkrenek

  • Aktivní člen
  • *
  • Příspěvků: 215
Re:Nerozpoznaná gk
« Odpověď #5 kdy: 01 Dubna 2012, 13:54:57 »
A ještě obsah /var/log/Xorg.0.log
Kód: [Vybrat]
[    23.691]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[    23.691] X Protocol Version 11, Revision 0
[    23.691] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[    23.691] Current Operating System: Linux honza-HP-Compaq-nc6120-PY507EA-AKB 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 i686
[    23.691] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-17-generic root=UUID=1d521895-b339-431b-a629-47f877c42a09 ro quiet splash vt.handoff=7
[    23.691] Build Date: 19 October 2011  05:09:41AM
[    23.691] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support)
[    23.691] Current version of pixman: 0.22.2
[    23.691] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    23.691] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.693] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr  1 12:22:19 2012
[    23.712] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.712] (==) No Layout section.  Using the first Screen section.
[    23.712] (==) No screen section available. Using defaults.
[    23.712] (**) |-->Screen "Default Screen Section" (0)
[    23.712] (**) |   |-->Monitor "<default monitor>"
[    23.712] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    23.712] (==) Automatically adding devices
[    23.712] (==) Automatically enabling devices
[    23.713] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.713] Entry deleted from font path.
[    23.713] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    23.713] Entry deleted from font path.
[    23.713] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    23.713] Entry deleted from font path.
[    23.713] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    23.713] Entry deleted from font path.
[    23.713] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    23.713] Entry deleted from font path.
[    23.713] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[    23.713] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    23.713] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.713] (II) Loader magic: 0x823ada0
[    23.713] (II) Module ABI versions:
[    23.713] X.Org ANSI C Emulation: 0.4
[    23.713] X.Org Video Driver: 10.0
[    23.713] X.Org XInput driver : 12.3
[    23.713] X.Org Server Extension : 5.0
[    23.714] (--) PCI:*(0:0:2:0) 8086:2592:103c:099c rev 3, Mem @ 0xd0400000/524288, 0xc0000000/268435456, 0xd0480000/262144, I/O @ 0x00007000/8
[    23.714] (--) PCI: (0:0:2:1) 8086:2792:103c:099c rev 3, Mem @ 0xd0500000/524288
[    23.714] (II) Open ACPI successful (/var/run/acpid.socket)
[    23.714] (II) LoadModule: "extmod"
[    23.748] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    23.748] (II) Module extmod: vendor="X.Org Foundation"
[    23.748] compiled for 1.10.4, module version = 1.0.0
[    23.748] Module class: X.Org Server Extension
[    23.748] ABI class: X.Org Server Extension, version 5.0
[    23.748] (II) Loading extension MIT-SCREEN-SAVER
[    23.748] (II) Loading extension XFree86-VidModeExtension
[    23.748] (II) Loading extension XFree86-DGA
[    23.748] (II) Loading extension DPMS
[    23.748] (II) Loading extension XVideo
[    23.748] (II) Loading extension XVideo-MotionCompensation
[    23.748] (II) Loading extension X-Resource
[    23.748] (II) LoadModule: "dbe"
[    23.748] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    23.748] (II) Module dbe: vendor="X.Org Foundation"
[    23.749] compiled for 1.10.4, module version = 1.0.0
[    23.749] Module class: X.Org Server Extension
[    23.749] ABI class: X.Org Server Extension, version 5.0
[    23.749] (II) Loading extension DOUBLE-BUFFER
[    23.749] (II) LoadModule: "glx"
[    23.749] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.749] (II) Module glx: vendor="X.Org Foundation"
[    23.749] compiled for 1.10.4, module version = 1.0.0
[    23.749] ABI class: X.Org Server Extension, version 5.0
[    23.749] (==) AIGLX enabled
[    23.749] (II) Loading extension GLX
[    23.749] (II) LoadModule: "record"
[    23.749] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    23.749] (II) Module record: vendor="X.Org Foundation"
[    23.749] compiled for 1.10.4, module version = 1.13.0
[    23.749] Module class: X.Org Server Extension
[    23.749] ABI class: X.Org Server Extension, version 5.0
[    23.749] (II) Loading extension RECORD
[    23.749] (II) LoadModule: "dri"
[    23.749] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    23.750] (II) Module dri: vendor="X.Org Foundation"
[    23.750] compiled for 1.10.4, module version = 1.0.0
[    23.750] ABI class: X.Org Server Extension, version 5.0
[    23.750] (II) Loading extension XFree86-DRI
[    23.750] (II) LoadModule: "dri2"
[    23.750] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.750] (II) Module dri2: vendor="X.Org Foundation"
[    23.750] compiled for 1.10.4, module version = 1.2.0
[    23.750] ABI class: X.Org Server Extension, version 5.0
[    23.750] (II) Loading extension DRI2
[    23.750] (==) Matched intel as autoconfigured driver 0
[    23.750] (==) Matched vesa as autoconfigured driver 1
[    23.750] (==) Matched fbdev as autoconfigured driver 2
[    23.750] (==) Assigned the driver to the xf86ConfigLayout
[    23.750] (II) LoadModule: "intel"
[    23.750] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.751] (II) Module intel: vendor="X.Org Foundation"
[    23.751] compiled for 1.10.4, module version = 2.15.901
[    23.751] Module class: X.Org Video Driver
[    23.751] ABI class: X.Org Video Driver, version 10.0
[    23.751] (II) LoadModule: "vesa"
[    23.751] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.751] (II) Module vesa: vendor="X.Org Foundation"
[    23.751] compiled for 1.10.2, module version = 2.3.0
[    23.751] Module class: X.Org Video Driver
[    23.751] ABI class: X.Org Video Driver, version 10.0
[    23.751] (II) LoadModule: "fbdev"
[    23.751] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.756] (II) Module fbdev: vendor="X.Org Foundation"
[    23.756] compiled for 1.10.0, module version = 0.4.2
[    23.756] ABI class: X.Org Video Driver, version 10.0
[    23.756] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    23.756] (II) VESA: driver for VESA chipsets: vesa
[    23.756] (II) FBDEV: driver for framebuffer: fbdev
[    23.756] (++) using VT number 7

[    23.758] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.758] (WW) Falling back to old probe method for vesa
[    23.758] (WW) Falling back to old probe method for fbdev
[    23.758] (II) Loading sub module "fbdevhw"
[    23.758] (II) LoadModule: "fbdevhw"
[    23.759] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.759] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.759] compiled for 1.10.4, module version = 0.0.2
[    23.759] ABI class: X.Org Video Driver, version 10.0
[    23.759] drmOpenDevice: node name is /dev/dri/card0
[    23.759] drmOpenDevice: open result is 9, (OK)
[    23.759] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    23.759] drmOpenDevice: node name is /dev/dri/card0
[    23.759] drmOpenDevice: open result is 9, (OK)
[    23.759] drmOpenByBusid: drmOpenMinor returns 9
[    23.759] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    23.759] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    23.759] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.759] (==) intel(0): RGB weight 888
[    23.759] (==) intel(0): Default visual is TrueColor
[    23.759] (II) intel(0): Integrated Graphics Chipset: Intel(R) 915GM
[    23.759] (--) intel(0): Chipset: "915GM"
[    23.759] (**) intel(0): Relaxed fencing disabled
[    23.759] (**) intel(0): Wait on SwapBuffers? enabled
[    23.759] (**) intel(0): Triple buffering? enabled
[    23.759] (**) intel(0): Framebuffer tiled
[    23.759] (**) intel(0): Pixmaps tiled
[    23.759] (**) intel(0): 3D buffers tiled
[    23.759] (**) intel(0): SwapBuffers wait enabled
[    23.759] (==) intel(0): video overlay key set to 0x101fe
[    23.759] (II) intel(0): Output LVDS1 has no monitor section
[    23.759] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    23.944] (II) intel(0): Output VGA1 has no monitor section
[    24.309] (II) intel(0): Output TV1 has no monitor section
[    24.309] (II) intel(0): EDID for output LVDS1
[    24.309] (II) intel(0): Manufacturer: SEC  Model: 0  Serial#: 0
[    24.309] (II) intel(0): Year: 2003  Week: 0
[    24.309] (II) intel(0): EDID Version: 1.3
[    24.309] (II) intel(0): Digital Display Input
[    24.309] (II) intel(0): Max Image Size [cm]: horiz.: 31  vert.: 23
[    24.309] (II) intel(0): Gamma: 2.20
[    24.309] (II) intel(0): No DPMS capabilities specified
[    24.309] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    24.309] (II) intel(0): First detailed timing is preferred mode
[    24.309] (II) intel(0): redX: 0.589 redY: 0.337   greenX: 0.322 greenY: 0.524
[    24.309] (II) intel(0): blueX: 0.152 blueY: 0.137   whiteX: 0.315 whiteY: 0.330
[    24.309] (II) intel(0): Manufacturer's mask: 0
[    24.309] (II) intel(0): Supported detailed timing:
[    24.309] (II) intel(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
[    24.309] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[    24.309] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[    24.309] (II) intel(0): Unknown vendor-specific block f
[    24.309] (II) intel(0):  SAMSUNG
[    24.309] (II) intel(0):  LTN150XB-L03
[    24.309] (II) intel(0): EDID (in hex):
[    24.309] (II) intel(0): 00ffffffffffff004ca3000000000000
[    24.309] (II) intel(0): 000d0103801f17780ad90e9656528627
[    24.309] (II) intel(0): 23505400000001010101010101010101
[    24.309] (II) intel(0): 01010101010164190040410026301888
[    24.309] (II) intel(0): 360030e4100000190000000f00047e18
[    24.309] (II) intel(0): ff0105026f18ff027401000000fe0053
[    24.309] (II) intel(0): 414d53554e470a2020202020000000fe
[    24.309] (II) intel(0): 004c544e31353058422d4c30330a0049
[    24.309] (II) intel(0): EDID vendor "SEC", prod id 0
[    24.309] (II) intel(0): Printing DDC gathered Modelines:
[    24.309] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    24.309] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    24.309] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    24.309] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    24.309] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    24.309] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    24.309] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    24.309] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    24.309] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    24.310] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    24.310] (II) intel(0): Printing probed modes for output LVDS1
[    24.310] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    24.310] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    24.310] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    24.310] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    24.508] (II) intel(0): EDID for output VGA1
[    25.081] (II) intel(0): EDID for output TV1
[    25.081] (II) intel(0): Output LVDS1 connected
[    25.081] (II) intel(0): Output VGA1 disconnected
[    25.081] (II) intel(0): Output TV1 disconnected
[    25.081] (II) intel(0): Using exact sizes for initial modes
[    25.081] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    25.081] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    25.081] (II) intel(0): Kernel page flipping support detected, enabling
[    25.081] (**) intel(0): Display dimensions: (310, 230) mm
[    25.081] (**) intel(0): DPI set to (83, 84)
[    25.081] (II) Loading sub module "fb"
[    25.081] (II) LoadModule: "fb"
[    25.081] (II) Loading /usr/lib/xorg/modules/libfb.so
[    25.082] (II) Module fb: vendor="X.Org Foundation"
[    25.082] compiled for 1.10.4, module version = 1.0.0
[    25.082] ABI class: X.Org ANSI C Emulation, version 0.4
[    25.082] (II) Loading sub module "dri2"
[    25.082] (II) LoadModule: "dri2"
[    25.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    25.082] (II) Module dri2: vendor="X.Org Foundation"
[    25.082] compiled for 1.10.4, module version = 1.2.0
[    25.082] ABI class: X.Org Server Extension, version 5.0
[    25.082] (II) UnloadModule: "vesa"
[    25.082] (II) Unloading vesa
[    25.082] (II) UnloadModule: "fbdev"
[    25.082] (II) Unloading fbdev
[    25.082] (II) UnloadModule: "fbdevhw"
[    25.082] (II) Unloading fbdevhw
[    25.082] (==) Depth 24 pixmap format is 32 bpp
[    25.082] (II) intel(0): [DRI2] Setup complete
[    25.082] (II) intel(0): [DRI2]   DRI driver: i915
[    25.082] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    25.082] (II) UXA(0): Driver registered support for the following operations:
[    25.082] (II)         solid
[    25.082] (II)         copy
[    25.082] (II)         composite (RENDER acceleration)
[    25.082] (II)         put_image
[    25.082] (II)         get_image
[    25.082] (==) intel(0): Backing store disabled
[    25.082] (==) intel(0): Silken mouse enabled
[    25.082] (II) intel(0): Initializing HW Cursor
[    25.104] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    25.106] (==) intel(0): DPMS enabled
[    25.106] (==) intel(0): Intel XvMC decoder disabled
[    25.106] (II) intel(0): Set up textured video
[    25.106] (II) intel(0): Set up overlay video
[    25.106] (II) intel(0): direct rendering: DRI2 Enabled
[    25.106] (==) intel(0): hotplug detection: "enabled"
[    25.106] (--) RandR disabled
[    25.106] (II) Initializing built-in extension Generic Event Extension
[    25.106] (II) Initializing built-in extension SHAPE
[    25.106] (II) Initializing built-in extension MIT-SHM
[    25.106] (II) Initializing built-in extension XInputExtension
[    25.106] (II) Initializing built-in extension XTEST
[    25.106] (II) Initializing built-in extension BIG-REQUESTS
[    25.106] (II) Initializing built-in extension SYNC
[    25.106] (II) Initializing built-in extension XKEYBOARD
[    25.106] (II) Initializing built-in extension XC-MISC
[    25.106] (II) Initializing built-in extension SECURITY
[    25.106] (II) Initializing built-in extension XINERAMA
[    25.106] (II) Initializing built-in extension XFIXES
[    25.106] (II) Initializing built-in extension RENDER
[    25.106] (II) Initializing built-in extension RANDR
[    25.106] (II) Initializing built-in extension COMPOSITE
[    25.106] (II) Initializing built-in extension DAMAGE
[    25.106] (II) Initializing built-in extension GESTURE
[    25.120] (II) AIGLX: Trying DRI driver /usr/lib/i386-linux-gnu/dri/i915_dri.so
[    25.124] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    25.124] (II) AIGLX: enabled GLX_INTEL_swap_event
[    25.124] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    25.124] (II) AIGLX: enabled GLX_SGI_make_current_read
[    25.124] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    25.124] (II) AIGLX: Loaded and initialized i915
[    25.124] (II) GLX: Initialized DRI2 GL provider for screen 0
[    25.125] (II) intel(0): Setting screen physical size to 270 x 203
[    25.137] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    25.150] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    25.150] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    25.150] (II) LoadModule: "evdev"
[    25.791] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.792] (II) Module evdev: vendor="X.Org Foundation"
[    25.792] compiled for 1.10.2, module version = 2.6.0
[    25.792] Module class: X.Org XInput Driver
[    25.792] ABI class: X.Org XInput driver, version 12.3
[    25.792] (II) Using input driver 'evdev' for 'Power Button'
[    25.792] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.792] (**) Power Button: always reports core events
[    25.792] (**) Power Button: Device: "/dev/input/event2"
[    25.793] (--) Power Button: Found keys
[    25.793] (II) Power Button: Configuring as keyboard
[    25.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    25.793] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    25.793] (**) Option "xkb_rules" "evdev"
[    25.793] (**) Option "xkb_model" "pc105"
[    25.793] (**) Option "xkb_layout" "cz"
[    25.798] (II) XKB: reuse xkmfile /var/lib/xkb/server-583B992BBA3776030BA62AC94FC7F0AE9B04119F.xkm
[    25.800] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    25.800] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    25.800] (II) Using input driver 'evdev' for 'Video Bus'
[    25.800] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.801] (**) Video Bus: always reports core events
[    25.801] (**) Video Bus: Device: "/dev/input/event5"
[    25.801] (--) Video Bus: Found keys
[    25.801] (II) Video Bus: Configuring as keyboard
[    25.801] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5"
[    25.801] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    25.802] (**) Option "xkb_rules" "evdev"
[    25.802] (**) Option "xkb_model" "pc105"
[    25.802] (**) Option "xkb_layout" "cz"
[    25.807] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    25.807] (II) No input driver/identifier specified (ignoring)
[    25.807] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    25.807] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    25.807] (II) Using input driver 'evdev' for 'Sleep Button'
[    25.807] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.807] (**) Sleep Button: always reports core events
[    25.807] (**) Sleep Button: Device: "/dev/input/event0"
[    25.807] (--) Sleep Button: Found keys
[    25.807] (II) Sleep Button: Configuring as keyboard
[    25.807] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0"
[    25.807] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[    25.807] (**) Option "xkb_rules" "evdev"
[    25.807] (**) Option "xkb_model" "pc105"
[    25.807] (**) Option "xkb_layout" "cz"
[    25.810] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[    25.810] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    25.810] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[    25.810] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.810] (**) USB Optical Mouse: always reports core events
[    25.810] (**) USB Optical Mouse: Device: "/dev/input/event4"
[    25.811] (--) USB Optical Mouse: Found 3 mouse buttons
[    25.811] (--) USB Optical Mouse: Found scroll wheel(s)
[    25.811] (--) USB Optical Mouse: Found relative axes
[    25.811] (--) USB Optical Mouse: Found x and y relative axes
[    25.811] (II) USB Optical Mouse: Configuring as mouse
[    25.811] (II) USB Optical Mouse: Adding scrollwheel support
[    25.811] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    25.811] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    25.811] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input4/event4"
[    25.811] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[    25.811] (II) USB Optical Mouse: initialized for relative axes.
[    25.811] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[    25.811] (**) USB Optical Mouse: (accel) acceleration profile 0
[    25.811] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[    25.811] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[    25.812] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[    25.812] (II) No input driver/identifier specified (ignoring)
[    25.818] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    25.818] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    25.818] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    25.818] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.818] (**) AT Translated Set 2 keyboard: always reports core events
[    25.818] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    25.818] (--) AT Translated Set 2 keyboard: Found keys
[    25.818] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    25.818] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    25.818] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    25.818] (**) Option "xkb_rules" "evdev"
[    25.818] (**) Option "xkb_model" "pc105"
[    25.818] (**) Option "xkb_layout" "cz"
[    25.819] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    25.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    25.819] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    25.819] (II) LoadModule: "synaptics"
[    25.819] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    25.820] (II) Module synaptics: vendor="X.Org Foundation"
[    25.820] compiled for 1.10.4, module version = 1.4.1
[    25.820] Module class: X.Org XInput Driver
[    25.820] ABI class: X.Org XInput driver, version 12.3
[    25.820] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    25.820] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    25.820] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.820] (**) Option "Device" "/dev/input/event7"
[    25.820] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    25.820] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    25.820] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    25.820] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    25.820] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[    25.820] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    25.820] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    25.820] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input7/event7"
[    25.820] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[    25.820] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    25.820] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    25.820] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    25.820] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    25.820] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    25.820] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    25.820] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    25.821] (II) SynPS/2 Synaptics TouchPad: failed to open grail, no gesture support
[    25.821] (--) SynPS/2 Synaptics TouchPad: touchpad found
[    25.821] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    25.821] (II) No input driver/identifier specified (ignoring)
[    25.828] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[    25.828] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    25.828] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    25.828] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    25.828] (**) HP WMI hotkeys: always reports core events
[    25.828] (**) HP WMI hotkeys: Device: "/dev/input/event6"
[    25.828] (--) HP WMI hotkeys: Found keys
[    25.828] (II) HP WMI hotkeys: Configuring as keyboard
[    25.828] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event6"
[    25.828] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[    25.828] (**) Option "xkb_rules" "evdev"
[    25.828] (**) Option "xkb_model" "pc105"
[    25.828] (**) Option "xkb_layout" "cz"
[    27.951] (II) intel(0): EDID vendor "SEC", prod id 0
[    27.951] (II) intel(0): Printing DDC gathered Modelines:
[    27.951] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    31.347] (II) intel(0): EDID vendor "SEC", prod id 0
[    31.347] (II) intel(0): Printing DDC gathered Modelines:
[    31.347] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    33.301] (II) intel(0): EDID vendor "SEC", prod id 0
[    33.301] (II) intel(0): Printing DDC gathered Modelines:
[    33.301] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    34.356] (II) intel(0): EDID vendor "SEC", prod id 0
[    34.356] (II) intel(0): Printing DDC gathered Modelines:
[    34.356] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    35.245] (II) intel(0): EDID vendor "SEC", prod id 0
[    35.245] (II) intel(0): Printing DDC gathered Modelines:
[    35.245] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    36.800] (II) intel(0): EDID vendor "SEC", prod id 0
[    36.800] (II) intel(0): Printing DDC gathered Modelines:
[    36.800] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    41.094] (II) XKB: reuse xkmfile /var/lib/xkb/server-3C2EA826D38C0E9DCCF897457B6117E0ACB24BCB.xkm
[  1953.359] (II) intel(0): EDID vendor "SEC", prod id 0
[  1953.359] (II) intel(0): Printing DDC gathered Modelines:
[  1953.359] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1954.148] (II) intel(0): EDID vendor "SEC", prod id 0
[  1954.148] (II) intel(0): Printing DDC gathered Modelines:
[  1954.148] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1955.954] (II) intel(0): EDID vendor "SEC", prod id 0
[  1955.954] (II) intel(0): Printing DDC gathered Modelines:
[  1955.954] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1957.024] (II) intel(0): EDID vendor "SEC", prod id 0
[  1957.024] (II) intel(0): Printing DDC gathered Modelines:
[  1957.024] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1957.797] (II) intel(0): EDID vendor "SEC", prod id 0
[  1957.797] (II) intel(0): Printing DDC gathered Modelines:
[  1957.797] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1959.060] (II) intel(0): EDID vendor "SEC", prod id 0
[  1959.061] (II) intel(0): Printing DDC gathered Modelines:
[  1959.061] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1959.945] (II) intel(0): EDID vendor "SEC", prod id 0
[  1959.945] (II) intel(0): Printing DDC gathered Modelines:
[  1959.945] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1960.964] (II) intel(0): Allocated new frame buffer 832x600 stride 4096, tiled
[  1961.126] (II) intel(0): EDID vendor "SEC", prod id 0
[  1961.126] (II) intel(0): Printing DDC gathered Modelines:
[  1961.126] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1962.115] (II) intel(0): Allocated new frame buffer 640x480 stride 4096, tiled
[  1962.321] (II) intel(0): EDID vendor "SEC", prod id 0
[  1962.321] (II) intel(0): Printing DDC gathered Modelines:
[  1962.321] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1970.007] (II) intel(0): EDID vendor "SEC", prod id 0
[  1970.007] (II) intel(0): Printing DDC gathered Modelines:
[  1970.007] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  1970.979] (II) intel(0): Allocated new frame buffer 832x600 stride 4096, tiled
[  1971.195] (II) intel(0): EDID vendor "SEC", prod id 0
[  1971.195] (II) intel(0): Printing DDC gathered Modelines:
[  1971.195] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  2154.060] (II) intel(0): EDID vendor "SEC", prod id 0
[  2154.060] (II) intel(0): Printing DDC gathered Modelines:
[  2154.060] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[  2155.077] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled

mrkrenek

  • Aktivní člen
  • *
  • Příspěvků: 215
Re:Nerozpoznaná gk
« Odpověď #6 kdy: 01 Dubna 2012, 14:08:34 »
Funguje ti akcelerace, nejlepší test bude asi ExtremeTuxRacer
Ta hra funguje uplně v pohodě, plynule a na plné rozlišení, ale grafika je pořád neznámá

ntz_reloaded

  • Lokaj
  • Závislák
  • ***
  • Příspěvků: 3735
  • skill :: ur home erly
Re:Nerozpoznaná gk
« Odpověď #7 kdy: 01 Dubna 2012, 14:23:38 »
omg, podle ceho soudis ze ta grafika je nerozpoznana ??
tikejte mi, taky Vam tikam ...
song of the day - openSUSE, openindiana, DuckDuckGo
The noise ain't noise anymore, who's to blame, WHO'S TO BLAME ??

mrkrenek

  • Aktivní člen
  • *
  • Příspěvků: 215
Re:Nerozpoznaná gk
« Odpověď #8 kdy: 01 Dubna 2012, 14:30:10 »
V systémovém infu to píše, že je neznámá.
A to mě docela irituje :D

[příloha smazaná administrátorem]
« Poslední změna: 01 Dubna 2012, 14:31:46 od mrkrenek »

mskopek

  • Návštěvník
  • Příspěvků: 13
Re:Nerozpoznaná gk
« Odpověď #9 kdy: 05 Dubna 2012, 13:49:11 »
Mám ten samý problém na DELLU GX520 tam to také jede ale v systémovém infu není grafika napsaná. jen se občas trhají videa např. youtube a co jsou na webových stránkách. Mám Ubuntu 12.04.


Kód: [Vybrat]
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 01)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
04:02.0 Ethernet controller: Atheros Communications Inc. AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg] (rev 01)
« Poslední změna: 05 Dubna 2012, 13:49:39 od Tadeáš Pařík »

mrkrenek

  • Aktivní člen
  • *
  • Příspěvků: 215
Re:Nerozpoznaná gk
« Odpověď #10 kdy: 07 Dubna 2012, 12:18:46 »
Alespoň v tom nejsem sám, koho to irituje  :D
Mě se občas trhají taky, když jsou vě větším rozlišení ale to je tím, že je ta grafika sdílená a procesor není zrovna silák

Rover623

Re:Nerozpoznaná gk
« Odpověď #11 kdy: 07 Dubna 2012, 20:39:40 »
12.04 je BETA, tam se nedivím, že se to trhá

 

Provoz zaštiťuje spolek OpenAlt.