mám problém. Nainstaloval jsem Kubuntu Edgyho, ale systém nechce nastavit rozlišsní 1024 x 1280 s 80 hz. přitom by to muj monitor podle papírů měl umět.
Zde je obsah Xorg.conf (ovladače nemam nainstalovane):
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "int10"
Load "type1"
Load "vbe"
load "glx"
load "GLcore"
load "v4l"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
option "CoreKeyboard"
option "XkbRules" "xorg"
option "XkbModel" "pc105"
option "XkbLayout" "cz"
option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
option "CorePointer"
option "Device" "/dev/input/mice"
option "Protocol" "ExplorerPS/2"
option "ZAxisMapping" "4 5"
option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
option "Device" "/dev/wacom"# Change to
option "Type" "stylus"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
option "Device" "/dev/wacom"# Change to
option "Type" "eraser"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
option "Device" "/dev/wacom"# Change to
option "Type" "cursor"
option "ForceDevice" "ISDV4"# Tablet PC ONLY
# /dev/input/event
# for USB
EndSection
Section "Device"
identifier "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
boardname "nv"
busid "PCI:1:0:0"
driver "nv"
screen 0
EndSection
Section "Monitor"
identifier "Generic Monitor"
modelname "Custom 1"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
modeline "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
gamma 1.0
EndSection
Section "Screen"
Identifier "Default Screen"
Device "NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x]"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
depth 24
virtual 1280 1024
modes "1280x1024@60" "1280x960@60" "1280x854" "1152x768@54" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "device" #
identifier "device1"
boardname "nv"
busid "PCI:1:0:0"
driver "nv"
screen 1
EndSection
Section "screen" #
identifier "screen1"
device "device1"
defaultdepth 24
monitor "monitor1"
EndSection
Section "monitor" #
identifier "monitor1"
gamma 1.0
EndSection
Section "ServerFlags"
EndSectionA ani 1024x 768 nejde v 80 hz. Dík.
Téma: Rozlišení (Přečteno 1728 krát)
