Ahoj,
doteď jsem používal Madrivu, ale jelikož mě Ubuntu nadchlo (používám ho teď na svém notebooku), rozhodl jsem se ho nainstalovat i na hlavní počítač. Bohužel Ubuntu nepřečte partition table na sata disku - půl roku stará Mandriva to přitom zvládá bez problémů. Disk ale najde, zařízení /dev/sda existuje.
Výpis z dmesg:
ubuntu@ubuntu:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x000f73a0
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7700
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:c0000000)
[ 0.000000] Detected 1830.034 MHz processor.
[ 20.121098] Built 1 zonelists. Total pages: 260081
[ 20.121102] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 20.121301] mapped APIC to ffffd000 (fee00000)
[ 20.121303] mapped IOAPIC to ffffc000 (fec00000)
[ 20.121307] Enabling fast FPU save and restore... done.
[ 20.121309] Enabling unmasked SIMD FPU exception support... done.
[ 20.121319] Initializing CPU#0
[ 20.121376] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 20.123161] Console: colour VGA+ 80x25
[ 20.123726] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.124229] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.152146] Memory: 1028188k/1048512k available (1992k kernel code, 19652k reserved, 893k data, 328k init, 131008k highmem)
[ 20.152157] virtual kernel memory layout:
[ 20.152158] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 20.152159] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.152161] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 20.152162] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 20.152164] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 20.152165] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 20.152166] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 20.152170] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.229279] Calibrating delay using timer specific routine.. 3662.91 BogoMIPS (lpj=7325826)
[ 20.229327] Security Framework v1.0.0 initialized
[ 20.229335] SELinux: Disabled at boot.
[ 20.229353] Mount-cache hash table entries: 512
[ 20.229521] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 20.229531] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 20.229534] CPU: L2 Cache: 512K (64 bytes/line)
[ 20.229537] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 20.229549] Compat vDSO mapped to ffffe000.
[ 20.229554] Remapping vsyscall page to ffffe000
[ 20.229565] Checking 'hlt' instruction... OK.
[ 20.245401] SMP alternatives: switching to UP code
[ 20.245686] Freeing SMP alternatives: 11k freed
[ 20.245925] Early unpacking initramfs... done
[ 20.574756] ACPI: Core revision 20060707
[ 20.581836] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 20.585060] CPU0: AMD Athlon(tm) XP 2500+ stepping 00
[ 20.585082] Total of 1 processors activated (3662.91 BogoMIPS).
[ 20.585280] ENABLING IO-APIC IRQs
[ 20.585471] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 20.732851] Brought up 1 CPUs
[ 20.733109] Booting paravirtualized kernel on bare hardware
[ 20.733179] Time: 21:12:30 Date: 04/08/107
[ 20.733213] NET: Registered protocol family 16
[ 20.733314] EISA bus registered
[ 20.733319] ACPI: bus type pci registered
[ 20.768277] PCI: PCI BIOS revision 2.10 entry at 0xfbbd0, last bus=2
[ 20.768280] PCI: Using configuration type 1
[ 20.768282] Setting up standard PCI resources
[ 20.783825] ACPI: Interpreter enabled
[ 20.783828] ACPI: Using IOAPIC for interrupt routing
[ 20.784459] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.784463] PCI: Probing PCI hardware (bus 00)
[ 20.785423] Boot video device is 0000:02:00.0
[ 20.785471] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.841916] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 20.842440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 20.843646] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 20.843990] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.844331] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.844671] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 20.845019] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.845361] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 20.845705] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 20.846046] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 20.846389] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.846734] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 20.847074] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.847421] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 20.847766] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 20.848112] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.848454] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.848805] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 20.849115] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[ 20.849414] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[ 20.849712] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[ 20.850016] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[ 20.850315] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 20.850700] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[ 20.851083] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[ 20.851474] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[ 20.851858] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 20.852265] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[ 20.852647] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 20.852961] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 20.853342] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[ 20.853740] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 20.854121] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 20.854514] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 20.857505] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.857522] pnp: PnP ACPI init
[ 20.863182] pnp: PnP ACPI: found 14 devices
[ 20.863187] PnPBIOS: Disabled by ACPI PNP
[ 20.863246] PCI: Using ACPI for IRQ routing
[ 20.863250] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 20.899777] NET: Registered protocol family 8
[ 20.899779] NET: Registered protocol family 20
[ 20.900409] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[ 20.900413] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[ 20.900416] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[ 20.900419] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[ 20.900422] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[ 20.900425] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[ 20.900430] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[ 20.900433] pnp: 00:01: ioport range 0x5040-0x507f has been reserved
[ 20.900725] PCI: Bridge: 0000:00:08.0
[ 20.900728] IO window: 9000-afff
[ 20.900734] MEM window: ea000000-eaffffff
[ 20.900738] PREFETCH window: 50000000-500fffff
[ 20.900743] PCI: Bridge: 0000:00:1e.0
[ 20.900745] IO window: disabled.
[ 20.900749] MEM window: e8000000-e9ffffff
[ 20.900753] PREFETCH window: e4000000-e7ffffff
[ 20.900764] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 20.900798] NET: Registered protocol family 2
[ 20.936715] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 20.936924] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 20.938265] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.938928] TCP: Hash tables configured (established 131072 bind 65536)
[ 20.938931] TCP reno registered
[ 20.948761] checking if image is initramfs... it is
[ 21.576548] Freeing initrd memory: 6966k freed
[ 21.577036] audit: initializing netlink socket (disabled)
[ 21.577051] audit(1178658751.548:1): initialized
[ 21.577120] highmem bounce pool size: 64 pages
[ 21.577177] VFS: Disk quotas dquot_6.5.1
[ 21.577199] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 21.577250] io scheduler noop registered
[ 21.577253] io scheduler anticipatory registered
[ 21.577256] io scheduler deadline registered
[ 21.577264] io scheduler cfq registered (default)
[ 21.632230] isapnp: Scanning for PnP cards...
[ 21.986371] isapnp: No Plug & Play device found
[ 22.011926] Real Time Clock Driver v1.12ac
[ 22.011981] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.012118] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.012268] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.012794] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.013025] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.013238] mice: PS/2 mouse device common for all mice
[ 22.013807] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.014060] input: Macintosh mouse button emulation as /class/input/input0
[ 22.014094] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 22.014099] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 22.014303] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 22.014306] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 22.263773] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.263916] EISA: Probing bus 0 at eisa.0
[ 22.263939] Cannot allocate resource for EISA slot 4
[ 22.263942] Cannot allocate resource for EISA slot 5
[ 22.263958] EISA: Detected 0 cards.
[ 22.294023] TCP cubic registered
[ 22.294029] NET: Registered protocol family 1
[ 22.294053] Using IPI No-Shortcut mode
[ 22.294112] ACPI: (supports S0 S1 S4 S5)
[ 22.294164] Magic number: 7:988:246
[ 22.294214] hash matches device ttyw2
[ 22.294709] Freeing unused kernel memory: 328k freed
[ 22.295321] Time: tsc clocksource has been installed.
[ 22.310883] input: AT Translated Set 2 keyboard as /class/input/input1
[ 23.537693] Capability LSM initialized
[ 23.574368] ACPI: Fan [FAN] (on)
[ 23.580593] ACPI: Thermal Zone [THRM] (42 C)
[ 24.111017] usbcore: registered new interface driver usbfs
[ 24.111042] usbcore: registered new interface driver hub
[ 24.111068] usbcore: registered new device driver usb
[ 24.111786] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 24.112261] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 24.112270] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 16
[ 24.112285] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 24.112289] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 24.112447] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 24.112469] ohci_hcd 0000:00:02.0: irq 16, io mem 0xeb003000
[ 24.138987] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 24.192259] usb usb1: configuration #1 chosen from 1 choice
[ 24.192294] hub 1-0:1.0: USB hub found
[ 24.192307] hub 1-0:1.0: 3 ports detected
[ 24.215588] SCSI subsystem initialized
[ 24.220792] libata version 2.20 loaded.
[ 24.294213] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[ 24.294224] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 17
[ 24.294240] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 24.294244] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 24.294268] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 24.294288] ohci_hcd 0000:00:02.1: irq 17, io mem 0xeb004000
[ 24.352960] usb usb2: configuration #1 chosen from 1 choice
[ 24.352990] hub 2-0:1.0: USB hub found
[ 24.353006] hub 2-0:1.0: 3 ports detected
[ 24.363993] FDC 0 is a post-1991 82077
[ 24.454133] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 24.454145] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 18
[ 24.454158] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 24.454162] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 24.454188] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 24.454229] ehci_hcd 0000:00:02.2: debug port 1
[ 24.454234] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 24.454246] ehci_hcd 0000:00:02.2: irq 18, io mem 0xeb005000
[ 24.454254] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 24.454326] usb usb3: configuration #1 chosen from 1 choice
[ 24.454357] hub 3-0:1.0: USB hub found
[ 24.454367] hub 3-0:1.0: 6 ports detected
[ 24.558021] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 24.558028] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[ 24.558035] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 25.077356] eth0: forcedeth.c: subsystem: 01462:570c bound to 0000:00:04.0
[ 25.077483] sata_via 0000:01:07.0: version 2.1
[ 25.077748] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 25.077758] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
[ 25.077775] sata_via 0000:01:07.0: routed to hard irq line 11
[ 25.077845] ata1: SATA max UDMA/133 cmd 0x00019000 ctl 0x0001900a bmdma 0x0001a000 irq 19
[ 25.077880] ata2: SATA max UDMA/133 cmd 0x00019400 ctl 0x0001940a bmdma 0x0001a008 irq 19
[ 25.077913] ata3: PATA max UDMA/133 cmd 0x00019800 ctl 0x0001980a bmdma 0x0001a010 irq 19
[ 25.077931] scsi0 : sata_via
[ 25.516547] usb 3-4: new high speed USB device using ehci_hcd and address 4
[ 25.544551] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 25.552930] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 25.552934] ata1.00: ATA-7: WDC WD2500JS-00MHB0, 02.01C03, max UDMA/133
[ 25.552937] ata1.00: 488397168 sectors, multi 16: LBA48
[ 25.560897] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 25.560900] ata1.00: configured for UDMA/133
[ 25.560911] scsi1 : sata_via
[ 25.648826] usb 3-4: configuration #1 chosen from 1 choice
[ 25.648906] hub 3-4:1.0: USB hub found
[ 25.649006] hub 3-4:1.0: 4 ports detected
[ 25.872234] ata2: SATA link down (SStatus 0 SControl 310)
[ 25.883207] ATA: abnormal status 0x7F on port 0x00019407
[ 25.883226] scsi2 : sata_via
[ 26.047592] ATA: abnormal status 0x8 on port 0x00019807
[ 26.047706] scsi 0:0:0:0: Direct-Access ATA WDC WD2500JS-00M 02.0 PQ: 0 ANSI: 5
[ 26.048374] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[ 26.048398] NFORCE2: chipset revision 162
[ 26.048400] NFORCE2: not 100% native mode: will probe irqs later
[ 26.048405] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[ 26.048412] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[ 26.048420] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 26.048432] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[ 26.048441] Probing IDE interface ide0...
[ 26.064071] usb 1-2: new full speed USB device using ohci_hcd and address 3
[ 26.066152] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 26.066167] sda: Write Protect is off
[ 26.066170] sda: Mode Sense: 00 3a 00 00
[ 26.066186] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.066249] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 26.066259] sda: Write Protect is off
[ 26.066261] sda: Mode Sense: 00 3a 00 00
[ 26.066275] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.066279] sda: unknown partition table
[ 26.077343] sd 0:0:0:0: Attached scsi disk sda
[ 26.081837] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.279495] usb 1-2: configuration #1 chosen from 1 choice
[ 26.335935] hda: Maxtor 6Y120L0, ATA DISK drive
[ 26.583591] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 26.797927] usb 2-1: configuration #1 chosen from 1 choice
[ 26.801718] usbcore: registered new interface driver libusual
[ 26.805438] Initializing USB Mass Storage driver...
[ 26.805520] scsi3 : SCSI emulation for USB Mass Storage devices
[ 26.805578] usb-storage: device found at 3
[ 26.805581] usb-storage: waiting for device to settle before scanning
[ 26.805594] usbcore: registered new interface driver usb-storage
[ 26.805597] USB Mass Storage support registered.
[ 26.817916] usbcore: registered new interface driver hiddev
[ 26.825190] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 26.825309] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.1-1
[ 26.825326] usbcore: registered new interface driver usbhid
[ 26.825330] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 27.119232] hdb: LITE-ON LTR-48246K, ATAPI CD/DVD-ROM drive
[ 27.178672] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 27.189356] Probing IDE interface ide1...
[ 28.198265] hdd: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive
[ 28.255492] ide1 at 0x170-0x177,0x376 on irq 15
[ 28.291391] hdb: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 28.291400] Uniform CD-ROM driver Revision: 3.20
[ 28.331434] hda: max request size: 128KiB
[ 28.331568] hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 28.331700] hda: cache flushes supported
[ 28.331725] hda:<6>hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 28.335761] hda1 hda2 < hda5 hda6 hda7 hda8 > hda3
[ 29.667678] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 29.722373] ISO 9660 Extensions: RRIP_1991A
[ 29.761575] Registering unionfs 20060916-2203
[ 29.761580] unionfs: debugging is not enabled
[ 29.768882] loop: loaded (max 8 devices)
[ 29.903732] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 31.780848] usb-storage: device scan complete
[ 31.787853] scsi 3:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 31.794820] scsi 3:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 31.801810] scsi 3:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 31.808804] scsi 3:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 31.855954] sd 3:0:0:0: Attached scsi removable disk sdb
[ 31.855996] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 31.902792] sd 3:0:0:1: Attached scsi removable disk sdc
[ 31.902834] sd 3:0:0:1: Attached scsi generic sg2 type 0
[ 31.949758] sd 3:0:0:2: Attached scsi removable disk sdd
[ 31.949804] sd 3:0:0:2: Attached scsi generic sg3 type 0
[ 31.996740] sd 3:0:0:3: Attached scsi removable disk sde
[ 31.996787] sd 3:0:0:3: Attached scsi generic sg4 type 0
[ 103.542649] Linux agpgart interface v0.102 (c) Dave Jones
[ 103.800559] agpgart: Detected NVIDIA nForce2 chipset
[ 103.804845] agpgart: AGP aperture is 64M @ 0xe0000000
[ 104.356597] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 104.564295] NET: Registered protocol family 17
[ 104.726345] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 105.083012] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 105.083054] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5040
[ 105.229772] input: PC Speaker as /class/input/input3
[ 105.449289] parport: PnPBIOS parport detected.
[ 105.449351] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 106.233891] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[ 106.233898] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
[ 106.233927] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 106.556664] intel8x0_measure_ac97_clock: measured 56829 usecs
[ 106.556670] intel8x0: clocking to 48000
[ 108.234555] NET: Registered protocol family 10
[ 108.234663] lo: Disabled Privacy Extensions
[ 109.348673] fuse init (API version 7.8)
[ 109.925884] Adding 522072k swap on /dev/hda7. Priority:-1 extents:1 across:522072k
[ 116.461796] input: Power Button (FF) as /class/input/input4
[ 116.466431] ACPI: Power Button (FF) [PWRF]
[ 116.509268] input: Power Button (CM) as /class/input/input5
[ 116.513912] ACPI: Power Button (CM) [PWRB]
[ 117.516521] No dock devices found.
[ 117.540796] Using specific hotkey driver
[ 117.693669] ibm_acpi: ec object not found
[ 117.999125] pcc_acpi: loading...
[ 118.697860] eth0: no IPv6 routers present
[ 134.822017] lp0: using parport0 (interrupt-driven).
[ 135.581491] ppdev: user-space parallel port driver
[ 145.819714] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 145.819720] apm: overridden by ACPI.
[ 148.151766] eth0: no IPv6 routers present
[ 148.894545] Bluetooth: Core ver 2.11
[ 148.894619] NET: Registered protocol family 31
[ 148.894621] Bluetooth: HCI device and connection manager initialized
[ 148.894625] Bluetooth: HCI socket layer initialized
[ 149.519761] Bluetooth: L2CAP ver 2.8
[ 149.519766] Bluetooth: L2CAP socket layer initialized
[ 150.028016] Bluetooth: RFCOMM socket layer initialized
[ 150.028033] Bluetooth: RFCOMM TTY layer initialized
[ 150.028036] Bluetooth: RFCOMM ver 1.8
[ 267.700181] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 267.939873] JFS: nTxBlock = 8092, nTxLock = 64736
[ 268.283186] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
[ 268.283653] SGI XFS Quota Management subsystem
ubuntu@ubuntu:~$Nevíte někdo, v čem je zádrhel?
Jindra
Téma: Najde sata disk, ale nepřečtě partition table (Přečteno 2149 krát)