Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Ubuntu 7.10 - neni bootscreen + rozmazane pismo v konzole sessions [vyřešeno]  (Přečteno 1537 krát)

sobi

  • Návštěvník
  • Příspěvků: 27
Zdravim,
nezobrazuje se mi u Gibona bootscreen, jen 3 minuty cerna obrazovka a pak primo loginscreen..
to by az samotny moc nevadilo, jenze prepnuti do jiny session pres <ctrl><alt><F1>..<F6>..
sice funguje, ale zobrazuje rozmazany necitelny pismo..
zkousel jsem i dpkg-reconfigure xserver-xorg, ale porad stejny..

mam starsi notebook HP Pavilion 5200, grafika ATI IGP345 default rozliseni 1024x768

diky za radu

/etc/X11/xorg.conf:

Kód: [Vybrat]
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "ATI Technologies Inc Radeon IGP 330M/340M/350M"
Boardname "ati"
Busid "PCI:1:5:0"
Driver "ati"
Screen 0
Option "MergedFB" "off"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Vendorname "Generic LCD Display"
Modelname "LCD Panel 1024x768"
Horizsync 31.5-48.0
Vertrefresh 56.0 - 65.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc Radeon IGP 330M/340M/350M"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1024 768
Modes "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection
Section "device" # 
Identifier "device1"
Boardname "ati"
Busid "PCI:1:5:0"
Driver "ati"
Screen 1
Option "MergedFB" "off"
EndSection
Section "screen" # 
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60"
EndSubSection
EndSection
Section "monitor" # 
Identifier "monitor1"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
« Poslední změna: 11 Ledna 2008, 12:05:41 od Anna Taliánová »

jiri-j

  • Aktivní člen
  • *
  • Příspěvků: 489
  • skill: Lama
Re: Gibon: nezobrazovani bootscreenu + rozmazane pismo v konzole sessions
« Odpověď #1 kdy: 21 Října 2007, 00:06:20 »
Tady už nějaký hodný člověk zveřejnil řešení problému, taky jsem to podle něj vyřešil
http://forum.ubuntu.cz/index.php?topic=15262.msg110254#msg110254
« Poslední změna: 21 Října 2007, 00:09:09 od jiri-j »
Acer Aspire 3023WLMi, Sempron 3000+, ATI Mobility Radeon X700, 512MB RAM, Archlinux

sobi

  • Návštěvník
  • Příspěvků: 27
Re: Gibon: nezobrazovani bootscreenu + rozmazane pismo v konzole sessions
« Odpověď #2 kdy: 21 Října 2007, 00:25:25 »
Ok, funguje, dikys..
vyhledaval jsem to na foru, ale zadat jednoduche "startovaci obrazek" me nenapadlo..

reseni:
1) v /etc/usplash.conf zmenit rozliseni na 1024x768
2) spustit prikaz sudo update-initramfs -u -k `uname -r`
« Poslední změna: 11 Ledna 2008, 12:06:22 od Anna Taliánová »

 

Provoz zaštiťuje spolek OpenAlt.