Zde je pozadovany vypis dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524160) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524160
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524160
[ 0.000000] On node 0 totalpages: 524160
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292481 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00FAF00 checksum 0
[ 0.000000] ACPI: RSDP 000FAF00, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FF80000, 0038 (r1 A_M_I_ OEMRSDT 1000817 MSFT 97)
[ 0.000000] ACPI: FACP 7FF80200, 0081 (r1 A_M_I_ OEMFACP 1000817 MSFT 97)
[ 0.000000] ACPI: DSDT 7FF80590, 9554 (r1 A0543 A0543000 0 INTL 20060113)
[ 0.000000] ACPI: FACS 7FF8E000, 0040
[ 0.000000] ACPI: APIC 7FF80390, 0080 (r1 A_M_I_ OEMAPIC 1000817 MSFT 97)
[ 0.000000] ACPI: OEMB 7FF8E040, 0066 (r1 A_M_I_ AMI_OEM 1000817 MSFT 97)
[ 0.000000] ACPI: HPET 7FF89AF0, 0038 (r1 A_M_I_ OEMHPET 1000817 MSFT 97)
[ 0.000000] ACPI: MCFG 7FF89B30, 003C (r1 A_M_I_ OEMMCFG 1000817 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520065
[ 0.000000] Kernel command line: root=UUID=3cf5a4b8-1645-4cfb-b014-6b0a4d8193f3 ro quiet splash irqpoll
[ 0.000000] Misrouted IRQ fixup and polling support enabled
[ 0.000000] This may significantly impact system performance
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2667.788 MHz processor.
[ 28.713181] Console: colour VGA+ 80x25
[ 28.713184] console [tty0] enabled
[ 28.713349] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 28.713529] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 28.770973] Memory: 2066692k/2096640k available (2177k kernel code, 28688k reserved, 1006k data, 368k init, 1179136k highmem)
[ 28.770978] virtual kernel memory layout:
[ 28.770979] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 28.770980] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 28.770980] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 28.770981] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 28.770981] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 28.770982] .data : 0xc0320474 - 0xc041bdc4 (1006 kB)
[ 28.770983] .text : 0xc0100000 - 0xc0320474 (2177 kB)
[ 28.770985] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 28.771018] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 28.771113] hpet clockevent registered
[ 28.850953] Calibrating delay using timer specific routine.. 5348.01 BogoMIPS (lpj=10696038)
[ 28.850968] Security Framework initialized
[ 28.850973] SELinux: Disabled at boot.
[ 28.850983] AppArmor: AppArmor initialized
[ 28.850986] Failure registering capabilities with primary security module.
[ 28.850991] Mount-cache hash table entries: 512
[ 28.851078] Initializing cgroup subsys ns
[ 28.851082] Initializing cgroup subsys cpuacct
[ 28.851089] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3fd 00000000 00000001 00000000
[ 28.851094] monitor/mwait feature present.
[ 28.851095] using mwait in idle threads.
[ 28.851097] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 28.851098] CPU: L2 cache: 4096K
[ 28.851100] CPU: Physical Processor ID: 0
[ 28.851101] CPU: Processor Core ID: 0
[ 28.851102] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3fd 00000000 00000001 00000000
[ 28.851108] Compat vDSO mapped to ffffe000.
[ 28.851117] Checking 'hlt' instruction... OK.
[ 28.867173] SMP alternatives: switching to UP code
[ 28.868234] Early unpacking initramfs... done
[ 29.081467] ACPI: Core revision 20070126
[ 29.081502] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 29.096195] CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 29.096206] SMP alternatives: switching to SMP code
[ 29.096678] Booting processor 1/1 eip 3000
[ 29.106906] Initializing CPU#1
[ 29.206144] Calibrating delay using timer specific routine.. 5335.39 BogoMIPS (lpj=10670796)
[ 29.206148] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3fd 00000000 00000001 00000000
[ 29.206152] monitor/mwait feature present.
[ 29.206153] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 29.206155] CPU: L2 cache: 4096K
[ 29.206156] CPU: Physical Processor ID: 0
[ 29.206157] CPU: Processor Core ID: 1
[ 29.206158] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3fd 00000000 00000001 00000000
[ 29.206655] CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b
[ 29.206669] Total of 2 processors activated (10683.41 BogoMIPS).
[ 29.206788] ENABLING IO-APIC IRQs
[ 29.206940] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 29.353896] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 29.373862] Brought up 2 CPUs
[ 29.373878] CPU0 attaching sched-domain:
[ 29.373879] domain 0: span 03
[ 29.373880] groups: 01 02
[ 29.373882] CPU1 attaching sched-domain:
[ 29.373883] domain 0: span 03
[ 29.373884] groups: 02 01
[ 29.374016] net_namespace: 64 bytes
[ 29.374022] Booting paravirtualized kernel on bare hardware
[ 29.374301] Time: 22:13:35 Date: 08/07/08
[ 29.374318] NET: Registered protocol family 16
[ 29.374428] EISA bus registered
[ 29.374431] ACPI: bus type pci registered
[ 29.374567] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 29.374568] PCI: Using configuration type 1
[ 29.374580] Setting up standard PCI resources
[ 29.381805] ACPI: EC: Look up EC in DSDT
[ 29.387349] ACPI: Interpreter enabled
[ 29.387351] ACPI: (supports S0 S1 S3 S4 S5)
[ 29.387361] ACPI: Using IOAPIC for interrupt routing
[ 29.391753] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 29.392208] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 29.392210] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 29.392994] PCI: Transparent bridge - 0000:00:1e.0
[ 29.393022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 29.393120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 29.393179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 29.393257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 29.393316] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 29.393368] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 29.393418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 29.395169] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.395254] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 29.395336] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 29.395417] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 29.395497] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 29.395578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 29.395659] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 29.395741] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 29.395818] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - BC, should be B3 [20070126]
[ 29.395823] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 29.395841] pnp: PnP ACPI init
[ 29.395845] ACPI: bus type pnp registered
[ 29.397925] pnp: PnP ACPI: found 16 devices
[ 29.397926] ACPI: ACPI bus type pnp unregistered
[ 29.397929] PnPBIOS: Disabled by ACPI PNP
[ 29.398059] PCI: Using ACPI for IRQ routing
[ 29.398060] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 29.425675] NET: Registered protocol family 8
[ 29.425676] NET: Registered protocol family 20
[ 29.425694] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 29.425697] hpet0: 3 64-bit timers, 14318180 Hz
[ 29.426715] AppArmor: AppArmor Filesystem Enabled
[ 29.429661] Time: tsc clocksource has been installed.
[ 29.429693] Switched to high resolution mode on CPU 0
[ 29.429734] Switched to high resolution mode on CPU 1
[ 29.445616] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 29.445622] system 00:07: ioport range 0x290-0x297 has been reserved
[ 29.445625] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 29.445627] system 00:08: ioport range 0x800-0x87f has been reserved
[ 29.445628] system 00:08: ioport range 0x400-0x41f has been reserved
[ 29.445630] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 29.445632] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 29.445633] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 29.445635] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 29.445637] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 29.445639] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
[ 29.445643] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 29.445645] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 29.445649] system 00:0e: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 29.445652] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 29.445654] system 00:0f: iomem range 0xc0000-0xdffff could not be reserved
[ 29.445656] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 29.445657] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
[ 29.445659] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 29.475841] PCI: Bridge: 0000:00:01.0
[ 29.475843] IO window: c000-cfff
[ 29.475845] MEM window: f8a00000-feafffff
[ 29.475847] PREFETCH window: cff00000-efefffff
[ 29.475849] PCI: Bridge: 0000:00:1c.0
[ 29.475850] IO window: disabled.
[ 29.475853] MEM window: disabled.
[ 29.475856] PREFETCH window: cfe00000-cfefffff
[ 29.475859] PCI: Bridge: 0000:00:1c.3
[ 29.475861] IO window: b000-bfff
[ 29.475864] MEM window: f8900000-f89fffff
[ 29.475866] PREFETCH window: disabled.
[ 29.475869] PCI: Bridge: 0000:00:1c.4
[ 29.475871] IO window: a000-afff
[ 29.475874] MEM window: f8800000-f88fffff
[ 29.475876] PREFETCH window: disabled.
[ 29.475880] PCI: Bridge: 0000:00:1c.5
[ 29.475881] IO window: 9000-9fff
[ 29.475884] MEM window: f8700000-f87fffff
[ 29.475887] PREFETCH window: disabled.
[ 29.475890] PCI: Bridge: 0000:00:1e.0
[ 29.475891] IO window: disabled.
[ 29.475894] MEM window: f8600000-f86fffff
[ 29.475896] PREFETCH window: disabled.
[ 29.475906] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.475909] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 29.475921] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.475925] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 29.475938] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 29.475941] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 29.475953] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.475956] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 29.475969] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 18
[ 29.475972] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 29.475979] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 29.475986] NET: Registered protocol family 2
[ 29.513481] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 29.513610] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 29.513879] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 29.514013] TCP: Hash tables configured (established 131072 bind 65536)
[ 29.514015] TCP reno registered
[ 29.525494] checking if image is initramfs... it is
[ 29.945106] Freeing initrd memory: 7302k freed
[ 29.945592] audit: initializing netlink socket (disabled)
[ 29.945603] audit(1218147215.029:1): initialized
[ 29.945741] highmem bounce pool size: 64 pages
[ 29.946898] VFS: Disk quotas dquot_6.5.1
[ 29.946943] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 29.947024] io scheduler noop registered
[ 29.947025] io scheduler anticipatory registered
[ 29.947026] io scheduler deadline registered
[ 29.947033] io scheduler cfq registered (default)
[ 29.947113] Boot video device is 0000:06:00.0
[ 29.947179] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 29.947202] assign_interrupt_mode Found MSI capability
[ 29.947221] Allocate Port Service[0000:00:01.0:pcie00]
[ 29.947269] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 29.947299] assign_interrupt_mode Found MSI capability
[ 29.947323] Allocate Port Service[0000:00:1c.0:pcie00]
[ 29.947342] Allocate Port Service[0000:00:1c.0:pcie02]
[ 29.947397] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 29.947426] assign_interrupt_mode Found MSI capability
[ 29.947450] Allocate Port Service[0000:00:1c.3:pcie00]
[ 29.947504] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 29.947534] assign_interrupt_mode Found MSI capability
[ 29.947558] Allocate Port Service[0000:00:1c.4:pcie00]
[ 29.947612] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 29.947641] assign_interrupt_mode Found MSI capability
[ 29.947665] Allocate Port Service[0000:00:1c.5:pcie00]
[ 29.947812] isapnp: Scanning for PnP cards...
[ 30.300589] isapnp: No Plug & Play device found
[ 30.315114] Real Time Clock Driver v1.12ac
[ 30.315238] hpet_resources: 0xfed00000 is busy
[ 30.315262] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 30.315347] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.315929] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 30.316343] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 30.316385] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 30.316443] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 30.318927] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 30.318930] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 30.343647] mice: PS/2 mouse device common for all mice
[ 30.343709] EISA: Probing bus 0 at eisa.0
[ 30.343730] EISA: Detected 0 cards.
[ 30.343732] cpuidle: using governor ladder
[ 30.343733] cpuidle: using governor menu
[ 30.343784] NET: Registered protocol family 1
[ 30.343803] Using IPI No-Shortcut mode
[ 30.343820] registered taskstats version 1
[ 30.343892] Magic number: 4:41:249
[ 30.343898] hash matches device ttyw5
[ 30.343923] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 30.343924] EDD information not available.
[ 30.344032] Freeing unused kernel memory: 368k freed
[ 30.366740] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 31.489040] fuse init (API version 7.9)
[ 31.501583] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 31.501716] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 31.501725] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 31.501732] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 31.728601] usbcore: registered new interface driver usbfs
[ 31.728614] usbcore: registered new interface driver hub
[ 31.728867] usbcore: registered new device driver usb
[ 31.729953] USB Universal Host Controller Interface driver v3.0
[ 31.729989] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 31.729997] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 31.729999] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 31.730144] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 31.730165] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480
[ 31.730241] usb usb1: configuration #1 chosen from 1 choice
[ 31.730256] hub 1-0:1.0: USB hub found
[ 31.730259] hub 1-0:1.0: 2 ports detected
[ 31.784131] SCSI subsystem initialized
[ 31.793496] libata version 3.00 loaded.
[ 31.827002] Floppy drive(s): fd0 is 1.44M
[ 31.832326] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 18
[ 31.832333] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 31.832336] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 31.832351] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 31.832372] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e800
[ 31.832439] usb usb2: configuration #1 chosen from 1 choice
[ 31.832454] hub 2-0:1.0: USB hub found
[ 31.832457] hub 2-0:1.0: 2 ports detected
[ 31.849062] FDC 0 is a post-1991 82077
[ 31.936092] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 31.936099] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 31.936102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 31.936117] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 31.936138] uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e880
[ 31.936205] usb usb3: configuration #1 chosen from 1 choice
[ 31.936221] hub 3-0:1.0: USB hub found
[ 31.936224] hub 3-0:1.0: 2 ports detected
[ 32.039879] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17
[ 32.039886] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 32.039889] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 32.039902] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 32.039922] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ec00
[ 32.039993] usb usb4: configuration #1 chosen from 1 choice
[ 32.040007] hub 4-0:1.0: USB hub found
[ 32.040010] hub 4-0:1.0: 2 ports detected
[ 32.143691] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 32.143701] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 32.143704] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 32.143719] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 32.147602] ehci_hcd 0000:00:1d.7: debug port 1
[ 32.147606] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 32.147610] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebfbc00
[ 32.159530] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 32.159607] usb usb5: configuration #1 chosen from 1 choice
[ 32.159622] hub 5-0:1.0: USB hub found
[ 32.159625] hub 5-0:1.0: 8 ports detected
[ 32.267395] ahci 0000:02:00.0: version 3.0
[ 32.267418] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 18
[ 32.542670] usb 5-7: new high speed USB device using ehci_hcd and address 2
[ 32.675663] usb 5-7: configuration #1 chosen from 1 choice
[ 32.675872] hub 5-7:1.0: USB hub found
[ 32.676109] hub 5-7:1.0: 4 ports detected
[ 32.977943] usb 5-7.3: new high speed USB device using ehci_hcd and address 3
[ 33.076024] usb 5-7.3: configuration #1 chosen from 1 choice
[ 33.266069] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 33.266072] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 33.266076] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 33.266168] scsi0 : ahci
[ 33.266262] scsi1 : ahci
[ 33.266296] ata1: SATA max UDMA/133 abar m8192@0xf87fe000 port 0xf87fe100 irq 18
[ 33.266299] ata2: SATA max UDMA/133 abar m8192@0xf87fe000 port 0xf87fe180 irq 18
[ 33.584341] ata1: SATA link down (SStatus 0 SControl 300)
[ 33.903624] ata2: SATA link down (SStatus 0 SControl 300)
[ 33.903683] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 33.953376] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f86ff800-f86fffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 33.953434] PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
[ 33.953438] ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 18 (level, low) -> IRQ 20
[ 33.953464] PCI: Setting latency timer of device 0000:02:00.1 to 64
[ 33.953498] scsi2 : pata_jmicron
[ 33.954121] scsi3 : pata_jmicron
[ 33.954514] ata3: PATA max UDMA/100 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 20
[ 33.954517] ata4: PATA max UDMA/100 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 20
[ 34.277042] ata_piix 0000:00:1f.1: version 2.12
[ 34.277053] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22
[ 34.277074] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 34.277691] scsi4 : ata_piix
[ 34.277807] scsi5 : ata_piix
[ 34.278505] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 34.278507] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 34.594389] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
[ 34.765917] ata5.00: configured for UDMA/33
[ 34.935631] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
[ 34.935672] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 35.092952] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 23
[ 35.092971] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 35.092992] scsi6 : ata_piix
[ 35.093080] scsi7 : ata_piix
[ 35.093097] ata7: SATA max UDMA/133 cmd 0xe400 ctl 0xe080 bmdma 0xd880 irq 23
[ 35.093099] ata8: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd888 irq 23
[ 35.220711] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800018756dd]
[ 35.268106] ata7.00: ATA-8: WDC WD3200AAKS-75VYA0, 12.01B02, max UDMA/133
[ 35.268109] ata7.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 35.282395] ata7.00: configured for UDMA/133
[ 35.939862] ata8.00: ATA-6: Config Disk, RGL10364, max UDMA/133
[ 35.939865] ata8.00: 640 sectors, multi 1: LBA
[ 35.939869] ata8.00: Drive reports diagnostics failure. This may indicate a drive
[ 35.939872] ata8.00: fault or invalid emulation. Contact drive vendor for information.
[ 35.939874] ata8.00: device is on DMA blacklist, disabling DMA
[ 35.940207] ata8.00: configured for PIO4
[ 35.940268] scsi 6:0:0:0: Direct-Access ATA WDC WD3200AAKS-7 12.0 PQ: 0 ANSI: 5
[ 35.940348] scsi 7:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
[ 35.947622] Driver 'sr' needs updating - please use bus_type methods
[ 35.948933] Driver 'sd' needs updating - please use bus_type methods
[ 35.966015] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 35.966017] Uniform CD-ROM driver Revision: 3.20
[ 35.966045] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 35.966131] sd 6:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 35.966139] sd 6:0:0:0: [sda] Write Protect is off
[ 35.966141] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 35.966151] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 35.966180] sd 6:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 35.966186] sd 6:0:0:0: [sda] Write Protect is off
[ 35.966187] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 35.966197] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 35.966199] sda: sda1 sda2 sda3 sda4 <<5>sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 35.968864] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 35.968875] scsi 7:0:0:0: Attached scsi generic sg2 type 0
[ 35.978065] sda5 sda6 sda7 sda8 sda9 >
[ 36.008790] sd 6:0:0:0: [sda] Attached SCSI disk
[ 36.008821] sd 7:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
[ 36.008829] sd 7:0:0:0: [sdb] Write Protect is off
[ 36.008830] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 36.008841] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 36.009368] sd 7:0:0:0: [sdb] 640 512-byte hardware sectors (0 MB)
[ 36.009376] sd 7:0:0:0: [sdb] Write Protect is off
[ 36.009378] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 36.009391] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 36.009393] sdb:<3>ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 65.940647] ata8.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in
[ 65.940648] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 65.940652] ata8.00: status: { DRDY }
[ 65.940660] ata8: soft resetting link
[ 66.282129] ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
[ 66.282131] ata8.00: revalidation failed (errno=-5)
[ 66.282133] ata8: failed to recover some devices, retrying in 5 secs
[ 71.271660] ata8: soft resetting link
[ 76.457004] ata8: port is slow to respond, please be patient (Status 0xd0)
[ 81.261210] ata8: SRST failed (errno=-16)
[ 81.261213] ata8: soft resetting link
[ 86.445562] ata8: port is slow to respond, please be patient (Status 0xd0)
[ 91.250766] ata8: SRST failed (errno=-16)
[ 91.250769] ata8: soft resetting link
[ 96.435122] ata8: port is slow to respond, please be patient (Status 0xd0)
[ 126.220200] ata8: SRST failed (errno=-16)
[ 126.220205] ata8: soft resetting link
[ 131.232938] ata8: SRST failed (errno=-16)
[ 131.232942] ata8: reset failed, giving up
[ 131.232944] ata8.00: disabled
[ 136.262636] ata8: port is slow to respond, please be patient (Status 0xd0)
[ 141.234468] ata8: device not ready (errno=-16), forcing hardreset
[ 141.234471] ata8: soft resetting link
[ 146.418818] ata8: port is slow to respond, please be patient (Status 0xd0)
[ 151.224023] ata8: SRST failed (errno=-16)
[ 151.224060] ata8: soft resetting link
[ 156.408374] ata8: port is slow to respond, please be patient (Status 0xd0)
[ 161.217570] ata8: SRST failed (errno=-16)
[ 161.217607] ata8: soft resetting link
[ 166.397931] ata8: port is slow to respond, please be patient (Status 0xd0)
[ 196.179022] ata8: SRST failed (errno=-16)
[ 196.179060] ata8: soft resetting link
[ 201.195750] ata8: SRST failed (errno=-16)
[ 201.195788] ata8: reset failed, giving up
[ 201.195831] ata8: EH complete
[ 201.195843] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.195846] end_request: I/O error, dev sdb, sector 0
[ 201.195849] Buffer I/O error on device sdb, logical block 0
[ 201.195905] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.195907] end_request: I/O error, dev sdb, sector 0
[ 201.195909] Buffer I/O error on device sdb, logical block 0
[ 201.195957] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.195959] end_request: I/O error, dev sdb, sector 0
[ 201.195961] Buffer I/O error on device sdb, logical block 0
[ 201.196005] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196008] end_request: I/O error, dev sdb, sector 0
[ 201.196009] Buffer I/O error on device sdb, logical block 0
[ 201.196052] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196055] end_request: I/O error, dev sdb, sector 0
[ 201.196056] Buffer I/O error on device sdb, logical block 0
[ 201.196094] ldm_validate_partition_table(): Disk read failed.
[ 201.196136] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196138] end_request: I/O error, dev sdb, sector 0
[ 201.196139] Buffer I/O error on device sdb, logical block 0
[ 201.196182] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196184] end_request: I/O error, dev sdb, sector 0
[ 201.196185] Buffer I/O error on device sdb, logical block 0
[ 201.196229] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196231] end_request: I/O error, dev sdb, sector 0
[ 201.196232] Buffer I/O error on device sdb, logical block 0
[ 201.196274] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196276] end_request: I/O error, dev sdb, sector 0
[ 201.196277] Buffer I/O error on device sdb, logical block 0
[ 201.196316] Dev sdb: unable to read RDB block 0
[ 201.196322] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196324] end_request: I/O error, dev sdb, sector 0
[ 201.196325] Buffer I/O error on device sdb, logical block 0
[ 201.196368] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196370] end_request: I/O error, dev sdb, sector 0
[ 201.196381] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196383] end_request: I/O error, dev sdb, sector 24
[ 201.196390] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196393] end_request: I/O error, dev sdb, sector 24
[ 201.196401] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196403] end_request: I/O error, dev sdb, sector 0
[ 201.196411] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.196413] end_request: I/O error, dev sdb, sector 0
[ 201.196417] unable to read partition table
[ 201.196454] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 201.216613] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.216616] end_request: I/O error, dev sdb, sector 0
[ 201.216628] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 201.216630] end_request: I/O error, dev sdb, sector 0
[ 201.620009] Attempting manual resume
[ 201.620011] swsusp: Resume From Partition 8:6
[ 201.620012] PM: Checking swsusp image.
[ 201.620171] PM: Resume from disk failed.
[ 201.642839] kjournald starting. Commit interval 5 seconds
[ 201.642842] EXT3-fs: mounted filesystem with ordered data mode.
[ 206.767616] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 206.767620] end_request: I/O error, dev sdb, sector 0
[ 206.767621] printk: 10 messages suppressed.
[ 206.767623] Buffer I/O error on device sdb, logical block 0
[ 206.767677] sd 7:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
[ 206.767679] end_request: I/O error, dev sdb, sector 0
[ 207.371086] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 207.393891] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 207.417817] EDAC MC: Ver: 2.1.0 Jul 11 2008
[ 207.449780] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 207.520852] EDAC i82975x: ECC disabled on both channels.
[ 207.689727] intel_rng: FWH not detected
[ 207.704482] input: Power Button (FF) as /devices/virtual/input/input3
[ 207.758031] ACPI: Power Button (FF) [PWRF]
[ 207.758085] input: Power Button (CM) as /devices/virtual/input/input4
[ 207.821892] ACPI: Power Button (CM) [PWRB]
[ 208.209094] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 208.209103] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 208.209121] sky2 0000:04:00.0: v1.20 addr 0xf89fc000 irq 17 Yukon-EC (0xb6) rev 2
[ 208.209391] sky2 eth0: addr 00:1d:60:bb:8c:2e
[ 208.209406] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 208.209411] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 208.209427] sky2 0000:03:00.0: v1.20 addr 0xf88fc000 irq 16 Yukon-EC (0xb6) rev 2
[ 208.209679] sky2 eth1: addr 00:1d:60:bb:8e:68
[ 208.279170] Linux agpgart interface v0.102
[ 208.323348] iTCO_vendor_support: vendor-support=0
[ 208.325234] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 208.359434] nvidia: module license 'NVIDIA' taints kernel.
[ 208.614004] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 208.614011] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 208.614846] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 208.675993] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 208.695339] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 17
[ 208.695351] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 208.733076] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 208.733098] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 208.910131] phy0: Selected rate control algorithm 'simple'
[ 209.017279] phy0: hwaddr 00:15:af:2b:0c:5a, rtl8187 V1 + rtl8225z2
[ 209.017291] usbcore: registered new interface driver rtl8187
[ 209.164437] lp: driver loaded but no devices found
[ 209.245453] Adding 7815580k swap on /dev/sda6. Priority:-1 extents:1 across:7815580k
[ 257.122542] EXT3 FS on sda7, internal journal
[ 302.707199] kjournald starting. Commit interval 5 seconds
[ 302.707421] EXT3 FS on sda8, internal journal
[ 302.707424] EXT3-fs: mounted filesystem with ordered data mode.
[ 303.003507] ip_tables: (C) 2000-2006 Netfilter Core Team
Téma: Dlouhodobý problém s neskutečně dlouhým bootováním v 8.04 a problémy po update (Přečteno 7819 krát)