Když bootuju Ubuntu 8.04, tak se splash zastaví na nějakých 25s a až potom zase nabíhání pokračuje. Během těch 25s se na obrazovku nic nevypisuje.
Tady je vypsaný dmesg, bootlog nešel zprovoznit.
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 257984
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 257984
[ 0.000000] On node 0 totalpages: 257984
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 223 pages used for memmap
[ 0.000000] HighMem zone: 28385 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6D40 checksum 0
[ 0.000000] ACPI: RSDP 000F6D40, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3EFC0000, 0038 (r1 A M I OEMRSDT 1000626 MSFT 97)
[ 0.000000] ACPI: FACP 3EFC0200, 0084 (r2 A M I OEMFACP 1000626 MSFT 97)
[ 0.000000] ACPI: DSDT 3EFC0430, 890F (r1 0AAAA 0AAAA000 0 INTL 2002026)
[ 0.000000] ACPI: FACS 3EFCF000, 0040
[ 0.000000] ACPI: APIC 3EFC0390, 0054 (r1 A M I OEMAPIC 1000626 MSFT 97)
[ 0.000000] ACPI: MCFG 3EFC03F0, 003C (r1 A M I OEMMCFG 1000626 MSFT 97)
[ 0.000000] ACPI: OEMB 3EFCF040, 0040 (r1 A M I AMI_OEM 1000626 MSFT 97)
[ 0.000000] ACPI: SSDT 3EFC8D40, 0344 (r1 AMI CPU1PM 1 INTL 2002026)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f000000:bfd14000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255969
[ 0.000000] Kernel command line: root=UUID=99b0f8eb-0856-4f50-a386-0dbf6b4a7db1 ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.022 MHz processor.
[ 23.935886] Console: colour VGA+ 80x25
[ 23.935890] console [tty0] enabled
[ 23.936201] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 23.936619] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 23.964982] Memory: 1010400k/1031936k available (2177k kernel code, 20756k reserved, 1005k data, 368k init, 114432k highmem)
[ 23.964991] virtual kernel memory layout:
[ 23.964992] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 23.964993] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 23.964995] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 23.964996] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 23.964997] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 23.964998] .data : 0xc0320704 - 0xc041bdc4 (1005 kB)
[ 23.965000] .text : 0xc0100000 - 0xc0320704 (2177 kB)
[ 23.965003] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 23.965037] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 24.045028] Calibrating delay using timer specific routine.. 3461.16 BogoMIPS (lpj=6922333)
[ 24.045052] Security Framework initialized
[ 24.045058] SELinux: Disabled at boot.
[ 24.045073] AppArmor: AppArmor initialized
[ 24.045077] Failure registering capabilities with primary security module.
[ 24.045085] Mount-cache hash table entries: 512
[ 24.045201] Initializing cgroup subsys ns
[ 24.045206] Initializing cgroup subsys cpuacct
[ 24.045217] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 24.045228] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 24.045230] CPU: L2 cache: 2048K
[ 24.045233] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000
[ 24.045241] Compat vDSO mapped to ffffe000.
[ 24.045252] Checking 'hlt' instruction... OK.
[ 24.061643] SMP alternatives: switching to UP code
[ 24.063454] Freeing SMP alternatives: 11k freed
[ 24.063554] Early unpacking initramfs... done
[ 24.436707] ACPI: Core revision 20070126
[ 24.436790] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 24.455757] CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[ 24.455773] Total of 1 processors activated (3461.16 BogoMIPS).
[ 24.455925] ENABLING IO-APIC IRQs
[ 24.456100] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 24.640812] APIC calibration not consistent with PM Timer: 140ms instead of 100ms
[ 24.640815] APIC delta adjusted to PM-Timer: 831247 (1163820)
[ 24.640866] Brought up 1 CPUs
[ 24.640889] CPU0 attaching sched-domain:
[ 24.640892] domain 0: span 01
[ 24.640893] groups: 01
[ 24.641047] net_namespace: 64 bytes
[ 24.641058] Booting paravirtualized kernel on bare hardware
[ 24.641495] Time: 16:53:35 Date: 12/16/08
[ 24.641519] NET: Registered protocol family 16
[ 24.641698] EISA bus registered
[ 24.641720] ACPI: bus type pci registered
[ 24.641917] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 24.641919] PCI: Using configuration type 1
[ 24.641943] Setting up standard PCI resources
[ 24.645296] ACPI: EC: Look up EC in DSDT
[ 24.698877] ACPI: Interpreter enabled
[ 24.698880] ACPI: (supports S0 S3 S4 S5)
[ 24.698897] ACPI: Using IOAPIC for interrupt routing
[ 24.706148] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 24.706151] ACPI: EC: driver started in poll mode
[ 24.706284] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 24.706799] Force enabled HPET at base address 0xfed00000
[ 24.706805] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 24.706809] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[ 24.707300] PCI: Transparent bridge - 0000:00:1e.0
[ 24.707365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 24.707561] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 24.711046] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
[ 24.711221] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 12) *11
[ 24.711395] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 12)
[ 24.711568] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 12)
[ 24.711741] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 12)
[ 24.711914] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
[ 24.712090] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 12)
[ 24.712263] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 12)
[ 24.712397] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 0D, should be 0B [20070126]
[ 24.712404] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 24.712432] pnp: PnP ACPI init
[ 24.712438] ACPI: bus type pnp registered
[ 24.716481] pnp: PnP ACPI: found 16 devices
[ 24.716484] ACPI: ACPI bus type pnp unregistered
[ 24.716488] PnPBIOS: Disabled by ACPI PNP
[ 24.716694] PCI: Using ACPI for IRQ routing
[ 24.716697] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 24.728830] NET: Registered protocol family 8
[ 24.728832] NET: Registered protocol family 20
[ 24.728986] hpet clockevent registered
[ 24.728992] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 24.728996] hpet0: 3 64-bit timers, 14318180 Hz
[ 24.730029] AppArmor: AppArmor Filesystem Enabled
[ 24.732786] Time: tsc clocksource has been installed.
[ 24.740819] system 00:08: ioport range 0x680-0x68f has been reserved
[ 24.740824] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 24.740827] system 00:09: ioport range 0x800-0x87f has been reserved
[ 24.740830] system 00:09: ioport range 0x400-0x41f has been reserved
[ 24.740833] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 24.740836] system 00:09: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 24.740839] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 24.740844] system 00:0a: iomem range 0xfec00000-0xfecfffff has been reserved
[ 24.740847] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 24.740853] system 00:0b: iomem range 0xffb80000-0xffbfffff could not be reserved
[ 24.740856] system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
[ 24.740861] system 00:0c: iomem range 0xffc00000-0xfff7ffff could not be reserved
[ 24.740867] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 24.740872] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 24.740875] system 00:0f: iomem range 0xc0000-0xcffff could not be reserved
[ 24.740878] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 24.740881] system 00:0f: iomem range 0x100000-0x3effffff could not be reserved
[ 24.740884] system 00:0f: iomem range 0x0-0x0 could not be reserved
[ 24.771260] PCI: Bus 2, cardbus bridge: 0000:01:01.0
[ 24.771263] IO window: 0000d000-0000d0ff
[ 24.771267] IO window: 0000d400-0000d4ff
[ 24.771272] PREFETCH window: 40000000-43ffffff
[ 24.771276] MEM window: 44000000-47ffffff
[ 24.771281] PCI: Bridge: 0000:00:1e.0
[ 24.771283] IO window: d000-dfff
[ 24.771288] MEM window: fe800000-fe8fffff
[ 24.771292] PREFETCH window: disabled.
[ 24.771307] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 24.771325] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 24.771338] NET: Registered protocol family 2
[ 24.808810] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 24.809026] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 24.809801] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.810273] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.810276] TCP reno registered
[ 24.820899] checking if image is initramfs... it is
[ 25.232572] Switched to high resolution mode on CPU 0
[ 25.548944] Freeing initrd memory: 7749k freed
[ 25.549520] audit: initializing netlink socket (disabled)
[ 25.549536] audit(1229446415.388:1): initialized
[ 25.549708] highmem bounce pool size: 64 pages
[ 25.551544] VFS: Disk quotas dquot_6.5.1
[ 25.551619] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 25.551758] io scheduler noop registered
[ 25.551760] io scheduler anticipatory registered
[ 25.551762] io scheduler deadline registered
[ 25.551773] io scheduler cfq registered (default)
[ 25.551784] Boot video device is 0000:00:02.0
[ 25.552097] isapnp: Scanning for PnP cards...
[ 25.905583] isapnp: No Plug & Play device found
[ 25.931596] Real Time Clock Driver v1.12ac
[ 25.931713] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 25.931842] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.931975] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 25.932590] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.933285] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 25.933350] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 25.933442] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 25.936782] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 25.939044] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 25.939049] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 25.939051] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 25.939054] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 25.939056] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 25.948277] mice: PS/2 mouse device common for all mice
[ 25.948381] EISA: Probing bus 0 at eisa.0
[ 25.948410] EISA: Detected 0 cards.
[ 25.948414] cpuidle: using governor ladder
[ 25.948416] cpuidle: using governor menu
[ 25.948503] NET: Registered protocol family 1
[ 25.948530] Using IPI No-Shortcut mode
[ 25.948562] registered taskstats version 1
[ 25.948657] Magic number: 4:276:894
[ 25.948690] hash matches device ptyy4
[ 25.948731] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 25.948733] EDD information not available.
[ 25.948920] Freeing unused kernel memory: 368k freed
[ 25.948947] Write protecting the kernel read-only data: 801k
[ 25.988218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 27.137075] fuse init (API version 7.9)
[ 27.156582] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 27.156587] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 27.157655] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 27.159196] ACPI: Thermal Zone [THRM] (39 C)
[ 27.795431] usbcore: registered new interface driver usbfs
[ 27.795455] usbcore: registered new interface driver hub
[ 27.807408] usbcore: registered new device driver usb
[ 27.823368] USB Universal Host Controller Interface driver v3.0
[ 27.823425] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17
[ 27.823436] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 27.823441] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 27.823758] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 27.823788] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e400
[ 27.823918] usb usb1: configuration #1 chosen from 1 choice
[ 27.823940] hub 1-0:1.0: USB hub found
[ 27.823945] hub 1-0:1.0: 2 ports detected
[ 27.874190] SCSI subsystem initialized
[ 27.927421] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[ 27.927434] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 27.927438] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 27.927460] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 27.927490] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e480
[ 27.927592] usb usb2: configuration #1 chosen from 1 choice
[ 27.927613] hub 2-0:1.0: USB hub found
[ 27.927618] hub 2-0:1.0: 2 ports detected
[ 27.938187] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 27.955286] libata version 3.00 loaded.
[ 28.031348] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
[ 28.031360] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 28.031365] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 28.031387] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 28.031416] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e800
[ 28.031520] usb usb3: configuration #1 chosen from 1 choice
[ 28.031541] hub 3-0:1.0: USB hub found
[ 28.031546] hub 3-0:1.0: 2 ports detected
[ 28.135393] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17
[ 28.135408] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 28.135412] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 28.135435] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 28.139358] ehci_hcd 0000:00:1d.7: debug port 1
[ 28.139364] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 28.139371] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfeb3fc00
[ 28.167223] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 28.179185] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 28.179296] usb usb4: configuration #1 chosen from 1 choice
[ 28.179319] hub 4-0:1.0: USB hub found
[ 28.179326] hub 4-0:1.0: 6 ports detected
[ 28.283291] 8139cp 0000:01:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 28.283296] 8139cp 0000:01:00.0: Try the "8139too" driver instead.
[ 28.285830] ACPI: PCI Interrupt 0000:01:01.1[B] -> GSI 18 (level, low) -> IRQ 19
[ 28.338552] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fe8fe000-fe8fe7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 28.346620] 8139too Fast Ethernet driver 0.9.28
[ 28.351690] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 28.352382] eth0: RealTek RTL8139 at 0xd800, 00:15:f2:ab:56:b0, IRQ 20
[ 28.352385] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 28.352463] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 28.352494] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 28.352506] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 28.355354] ata_piix 0000:00:1f.1: version 2.12
[ 28.355364] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
[ 28.355389] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 28.356118] scsi0 : ata_piix
[ 28.356588] scsi1 : ata_piix
[ 28.357885] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 28.357889] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 28.683407] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100
[ 28.683411] ata1.00: 156301488 sectors, multi 16: LBA48
[ 28.683437] ata1.01: ATAPI: TSSTcorpCD/DVDW TS-L532A, TI51, max UDMA/33
[ 28.699324] ata1.00: configured for UDMA/100
[ 28.726921] Clocksource tsc unstable (delta = -11946689084 ns)
[ 28.730944] Time: hpet clocksource has been installed.
[ 28.735890] ata1.01: configured for UDMA/33
[ 28.737263] usb 4-2: new high speed USB device using ehci_hcd and address 3
[ 28.769420] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4O PQ: 0 ANSI: 5
[ 28.771872] scsi 0:0:1:0: CD-ROM TSSTcorp CD/DVDW TS-L532A TI51 PQ: 0 ANSI: 5
[ 28.781595] Driver 'sd' needs updating - please use bus_type methods
[ 28.781664] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 28.781676] sd 0:0:0:0: [sda] Write Protect is off
[ 28.781679] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.781694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.781740] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 28.781749] sd 0:0:0:0: [sda] Write Protect is off
[ 28.781752] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 28.781766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 28.781770] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 28.790282] usb 4-2: configuration #1 chosen from 1 choice
[ 28.792067] sda1 sda2 sda3 sda4 < sda5 >
[ 28.814590] sd 0:0:0:0: [sda] Attached SCSI disk
[ 28.820425] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 28.820444] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 28.828123] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 28.828127] Uniform CD-ROM driver Revision: 3.20
[ 28.828168] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 28.896065] usb 4-5: new high speed USB device using ehci_hcd and address 4
[ 28.934485] usb 4-5: configuration #1 chosen from 1 choice
[ 28.935188] usbcore: registered new interface driver libusual
[ 28.940645] Initializing USB Mass Storage driver...
[ 29.016357] kjournald starting. Commit interval 5 seconds
[ 29.016366] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.033328] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800034b237f]
[ 29.043516] usb 1-1: new low speed USB device using uhci_hcd and address 3
[ 29.051588] usb 1-1: configuration #1 chosen from 1 choice
[ 29.051968] scsi2 : SCSI emulation for USB Mass Storage devices
[ 29.052033] usbcore: registered new interface driver usb-storage
[ 29.052036] USB Mass Storage support registered.
[ 29.052233] usb-storage: device found at 3
[ 29.052235] usb-storage: waiting for device to settle before scanning
[ 29.446220] usb-storage: device scan complete
[ 29.448143] scsi 2:0:0:0: Direct-Access ST332062 0AS PQ: 0 ANSI: 2
[ 29.448883] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 29.449840] sd 2:0:0:0: [sdb] Write Protect is off
[ 29.449843] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 29.449845] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 29.450309] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 29.451261] sd 2:0:0:0: [sdb] Write Protect is off
[ 29.451263] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 29.451265] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 29.451268] sdb:<6>iTCO_vendor_support: vendor-support=0
[ 32.220067] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 32.220188] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[ 32.220231] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 32.265710] Linux agpgart interface v0.102
[ 32.382405] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 32.420762] agpgart: Detected an Intel 915GM Chipset.
[ 32.421269] agpgart: Detected 16124K stolen memory.
[ 32.436301] agpgart: AGP aperture is 256M @ 0xd0000000
[ 32.541537] intel_rng: FWH not detected
[ 32.784361] input: Power Button (FF) as /devices/virtual/input/input3
[ 32.797404] ACPI: Power Button (FF) [PWRF]
[ 32.797510] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 32.813476] ACPI: Sleep Button (CM) [SLPB]
[ 32.813556] input: Lid Switch as /devices/virtual/input/input5
[ 32.842981] ACPI: Lid Switch [LID]
[ 32.949213] sdb1
[ 32.949283] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 32.949334] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 33.121655] asus-laptop: Asus Laptop Support version 0.42
[ 33.122005] asus-laptop: A3AC model detected
[ 33.123047] Registered led device: asus:mail
[ 33.793750] Yenta: CardBus bridge found at 0000:01:01.0 [1043:1117]
[ 33.921640] Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
[ 33.921645] Socket status: 30000006
[ 33.921647] Yenta: Raising subordinate bus# of parent bus (#01) from #02 to #05
[ 33.921654] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[ 33.921656] cs: IO port probe 0xd000-0xdfff: clean.
[ 33.921864] pcmcia: parent PCI bridge Memory window: 0xfe800000 - 0xfe8fffff
[ 34.048867] ieee80211_crypt: registered algorithm 'NULL'
[ 34.070553] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 34.070557] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 34.188757] sdhci: Secure Digital Host Controller Interface driver
[ 34.188761] sdhci: Copyright(c) Pierre Ossman
[ 34.188796] sdhci: SDHCI controller found at 0000:01:01.2 [1180:0822] (rev 17)
[ 34.188822] ACPI: PCI Interrupt 0000:01:01.2[C] -> GSI 19 (level, low) -> IRQ 18
[ 34.188842] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 34.188884] mmc0: SDHCI at 0xfe8fe800 irq 18 DMA
[ 34.269862] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 34.269866] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 34.269956] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 34.316640] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 34.485426] irda_init()
[ 34.485444] NET: Registered protocol family 23
[ 34.866147] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x926eb1, caps: 0xa0471b/0x0
[ 34.907623] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 35.368461] ACPI: AC Adapter [AC0] (on-line)
[ 35.489909] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input7
[ 35.512160] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 35.512499] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input8
[ 35.540133] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 35.574579] ACPI: Battery Slot [BAT0] (battery present)
[ 35.771650] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 22
[ 35.771679] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 36.423726] usbcore: registered new interface driver hiddev
[ 36.439347] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input9
[ 36.463723] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
[ 36.463740] usbcore: registered new interface driver usbhid
[ 36.463744] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 36.507632] Linux video capture interface: v2.00
[ 36.533559] stk11xx: Syntek USB2.0 webcam driver startup
[ 36.533591] stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
[ 36.533593] stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0xA311.
[ 36.533595] stk11xx: Release: 0001
[ 36.533597] stk11xx: Number of interfaces : 3
[ 36.534018] stk11xx: Initialize USB2.0 Syntek Camera
[ 36.742715] stk11xx: Syntek USB2.0 Camera is ready
[ 36.742756] stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
[ 36.742794] usbcore: registered new interface driver usb_stk11xx_driver
[ 36.742797] stk11xx: v1.3.1 : Syntek USB Video Camera
[ 36.893280] usbcore: registered new interface driver snd-usb-audio
[ 37.669133] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 37.672623] cs: IO port probe 0x100-0x3af: clean.
[ 37.673923] cs: IO port probe 0x3e0-0x4ff: clean.
[ 37.674286] cs: IO port probe 0x820-0x8ff: clean.
[ 37.674570] cs: IO port probe 0xc00-0xcf7: clean.
[ 37.675182] cs: IO port probe 0xa00-0xaff: clean.
[ 37.880890] loop: module loaded
[ 37.914560] lp: driver loaded but no devices found
[ 38.116646] Adding 2000084k swap on /dev/sda3. Priority:-1 extents:1 across:2000084k
[ 38.180676] EXT3 FS on sda2, internal journal
[ 38.223477] device-mapper: uevent: version 1.0.3
[ 38.223505] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 39.230451] ip_tables: (C) 2000-2006 Netfilter Core Team
Téma: Pomalý boot (Přečteno 2087 krát)
