Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: nejede zvuk, EasyUbuntu - problémy (ovladače NVidia akcelerovaně, internet)  (Přečteno 2556 krát)

Ji31

  • Aktivní člen
  • *
  • Příspěvků: 182
Moc jsem se těšil, jak nainstaluju Ubuntu na disk, protože z live CD mi jelo uplně krásně, jenže hned po instalaci se objevily první problémy:

1.) nejede mi zvuk. Zvukovku mám integrovanou na desce, http://www.czechcomputer.cz/product.jsp?artno=34566 Už jsem to tu řešil, ale nevedlo to nikam, viz.: http://forum.ubuntu.cz/viewtopic.php?id=3067 nejdřív jsem si myslel, že už jsem problém vyřešil, jenže on po restartu počítače zvuk prostě někdy načte a někdy ne..!
Když náhodou jede a dám se odhlásit a pak zase přihlásit, tak konec. Přitom z live CD nebyl jediný problém a všechno jelo naprosto krásně..

2.) Nainstaloval jsem EasyUbuntu a i když jsem zaklikl instalaci ovladačů nvidia, nepodařilo se mi ji spustit akcelerovaně..

3.) nakonec po instalaci EasyUbuntu se mi už ani nepodařilo dostat na net!

Jestli to takhle pude dál, tak bůhvíkde skončím a budu muset břednout v těch Windows.. :-(((

Neměl byste někdo nějakou radu? Mám to zkusit ještě přeinstalovat?

EDIT: tak jsem zjistil, že když hraje hudbu a pohnu s hlasitostí zvuku vedle času nahoře, tak se zvuk vypne a už s tím nic nenadělám...
« Poslední změna: 21 Října 2007, 17:18:45 od Anna Taliánová »
Linux is like a teepee. No Windows, no Gates, Apache inside

drat

  • Aktivní člen
  • *
  • Příspěvků: 394
Prosím pomoc!
« Odpověď #1 kdy: 26 Srpna 2006, 11:44:19 »
Podivej se prikazem
Kód: [Vybrat]
dmesgjestli ti kernel nehlasi nejaky errory. Popripade do /var/log na log Xorg (kvuli te nvidii).

Ji31

  • Aktivní člen
  • *
  • Příspěvků: 182
Prosím pomoc!
« Odpověď #2 kdy: 26 Srpna 2006, 18:56:19 »
Je, no díky za radu, napsalo to tohle, ale vůbec tomu nerozumím:

Kód: [Vybrat]
[17179569.184000] Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable)
[17179569.184000]  BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data)
[17179569.184000]  BIOS-e820: 000000003ffae000 - 000000003ffe0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000ff780
[17179569.184000] On node 0 totalpages: 262048
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32672 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM                                ) @ 0x000fad60
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x12000501 MSFT 0x00000097) @ 0x3ffa0000
[17179569.184000] ACPI: FADT (v001 A M I  OEMFACP  0x12000501 MSFT 0x00000097) @ 0x3ffa0200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x12000501 MSFT 0x00000097) @ 0x3ffa0390
[17179569.184000] ACPI: OEMB (v001 A M I  AMI_OEM  0x12000501 MSFT 0x00000097) @ 0x3ffae040
[17179569.184000]   >>> ERROR: Invalid checksum
[17179569.184000] ACPI: MCFG (v001 A M I  OEMMCFG  0x12000501 MSFT 0x00000097) @ 0x3ffa8490
[17179569.184000] ACPI: DSDT (v001  A0355 A0355000 0x00000000 INTL 0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda2 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 3211.918 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.612000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.612000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179569.632000] Memory: 1028508k/1048192k available (1976k kernel code, 18932k reserved, 606k data, 288k init, 130688k highmem)
[17179569.632000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.712000] Calibrating delay using timer specific routine.. 6430.54 BogoMIPS (lpj=12861084)
[17179569.712000] Security Framework v1.0.0 initialized
[17179569.712000] SELinux:  Disabled at boot.
[17179569.712000] Mount-cache hash table entries: 512
[17179569.712000] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001
[17179569.712000] CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001
[17179569.712000] monitor/mwait feature present.
[17179569.712000] using mwait in idle threads.
[17179569.712000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179569.712000] CPU: L2 cache: 1024K
[17179569.712000] CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000641d 00000000 00000001
[17179569.712000] mtrr: v2.0 (20020519)
[17179569.712000] CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
[17179569.712000] Enabling fast FPU save and restore... done.
[17179569.712000] Enabling unmasked SIMD FPU exception support... done.
[17179569.712000] Checking 'hlt' instruction... OK.
[17179569.728000] checking if image is initramfs... it is
[17179570.196000] Freeing initrd memory: 6617k freed
[17179570.200000] ACPI: Looking for DSDT ... not found!
[17179570.204000] ENABLING IO-APIC IRQs
[17179570.204000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.348000] NET: Registered protocol family 16
[17179570.348000] EISA bus registered
[17179570.348000] ACPI: bus type pci registered
[17179570.348000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[17179570.348000] PCI: Using MMCONFIG
[17179570.348000] ACPI: Subsystem revision 20051216
[17179570.356000] ACPI: Interpreter enabled
[17179570.356000] ACPI: Using IOAPIC for interrupt routing
[17179570.356000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.356000] PCI: Probing PCI hardware (bus 00)
[17179570.360000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.360000] Boot video device is 0000:04:00.0
[17179570.360000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.360000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.364000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[17179570.364000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[17179570.364000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[17179570.364000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[17179570.372000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[17179570.372000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179570.372000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[17179570.372000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[17179570.372000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179570.372000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.372000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[17179570.372000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[17179570.372000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.372000] pnp: PnP ACPI init
[17179570.380000] pnp: PnP ACPI: found 16 devices
[17179570.380000] PnPBIOS: Disabled by ACPI PNP
[17179570.380000] PCI: Using ACPI for IRQ routing
[17179570.380000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.392000] pnp: 00:07: ioport range 0x290-0x297 has been reserved
[17179570.392000] PCI: Bridge: 0000:00:01.0
[17179570.392000]   IO window: e000-efff
[17179570.392000]   MEM window: ddf00000-dfffffff
[17179570.392000]   PREFETCH window: e0000000-efffffff
[17179570.392000] PCI: Bridge: 0000:00:1c.0
[17179570.392000]   IO window: d000-dfff
[17179570.392000]   MEM window: disabled.
[17179570.392000]   PREFETCH window: disabled.
[17179570.392000] PCI: Bridge: 0000:00:1c.3
[17179570.392000]   IO window: c000-cfff
[17179570.392000]   MEM window: dde00000-ddefffff
[17179570.392000]   PREFETCH window: disabled.
[17179570.392000] PCI: Bridge: 0000:00:1e.0
[17179570.392000]   IO window: b000-bfff
[17179570.392000]   MEM window: disabled.
[17179570.392000]   PREFETCH window: disabled.
[17179570.392000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.392000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.392000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.392000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.392000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
[17179570.392000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179570.392000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.392000] audit: initializing netlink socket (disabled)
[17179570.392000] audit(1156617957.392:1): initialized
[17179570.392000] highmem bounce pool size: 64 pages
[17179570.392000] VFS: Disk quotas dquot_6.5.1
[17179570.392000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.392000] Initializing Cryptographic API
[17179570.392000] io scheduler noop registered
[17179570.392000] io scheduler anticipatory registered
[17179570.392000] io scheduler deadline registered
[17179570.392000] io scheduler cfq registered
[17179570.392000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.392000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.392000] assign_interrupt_mode Found MSI capability
[17179570.392000] Allocate Port Service[pcie00]
[17179570.392000] Allocate Port Service[pcie03]
[17179570.392000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.392000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.392000] assign_interrupt_mode Found MSI capability
[17179570.392000] Allocate Port Service[pcie00]
[17179570.392000] Allocate Port Service[pcie02]
[17179570.392000] Allocate Port Service[pcie03]
[17179570.392000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
[17179570.392000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179570.392000] assign_interrupt_mode Found MSI capability
[17179570.392000] Allocate Port Service[pcie00]
[17179570.392000] Allocate Port Service[pcie03]
[17179570.392000] isapnp: Scanning for PnP cards...
[17179570.744000] isapnp: No Plug & Play device found
[17179570.760000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[17179570.764000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.764000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.764000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179570.764000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.764000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.768000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.768000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.768000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.768000] mice: PS/2 mouse device common for all mice
[17179570.768000] EISA: Probing bus 0 at eisa.0
[17179570.768000] Cannot allocate resource for EISA slot 8
[17179570.768000] EISA: Detected 0 cards.
[17179570.768000] NET: Registered protocol family 2
[17179570.796000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179570.804000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.804000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179570.804000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.804000] TCP: Hash tables configured (established 262144 bind 65536)
[17179570.804000] TCP reno registered
[17179570.804000] TCP bic registered
[17179570.804000] NET: Registered protocol family 1
[17179570.804000] NET: Registered protocol family 8
[17179570.804000] NET: Registered protocol family 20
[17179570.804000] Using IPI Shortcut mode
[17179570.804000] ACPI wakeup devices:
[17179570.804000] P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 P0P8 P0P9 PS2K PS2M UAR1 USB2 USB3 USB4 MC97 USB1 EUSB
[17179570.804000] ACPI: (supports S0 S1 S3 S4 S5)
[17179570.804000] Freeing unused kernel memory: 288k freed
[17179570.840000] vga16fb: initializing
[17179570.840000] vga16fb: mapped to 0xc00a0000
[17179571.052000] Console: switching to colour frame buffer device 80x25
[17179571.052000] fb0: VGA16 VGA frame buffer device
[17179572.212000] Capability LSM initialized
[17179572.240000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179572.728000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179572.728000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 217
[17179572.728000] ICH7: chipset revision 1
[17179572.728000] ICH7: not 100% native mode: will probe irqs later
[17179572.728000]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
[17179572.728000]     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[17179572.728000] Probing IDE interface ide0...
[17179573.744000] hdb: ASUS CB-5216A, ATAPI CD/DVD-ROM drive
[17179573.800000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.800000] Probing IDE interface ide1...
[17179574.372000] hdb: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179574.372000] Uniform CD-ROM driver Revision: 3.20
[17179574.408000] SCSI subsystem initialized
[17179574.408000] ACPI: bus type scsi registered
[17179574.408000] libata version 1.20 loaded.
[17179574.408000] ata_piix 0000:00:1f.2: version 1.05
[17179574.408000] ata_pci_init_one: pci_dev class+intf: 0x1018f
[17179574.408000] ata_pci_init_one: NO_LEGACY == 0
[17179574.408000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 23 (level, low) -> IRQ 225
[17179574.408000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179574.408000] ata1: PATA max UDMA/133 cmd 0xA800 ctl 0xA402 bmdma 0x9400 irq 225
[17179574.408000] ata2: PATA max UDMA/133 cmd 0xA000 ctl 0x9802 bmdma 0x9408 irq 225
[17179574.572000] ata1: dev 0 cfg 00:0c5a 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:207f 93:0000
[17179574.572000] ata1: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
[17179574.572000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe6da0[17179574.576000] ata1: dev 0 configured for UDMA/133
[17179574.576000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe6da0[17179574.580000] scsi0 : ata_piix
[17179575.748000] ata2: disabling port
[17179575.748000] scsi1 : ata_piix
[17179575.748000]   Vendor: ATA       Model: ST3160811AS       Rev: 3.AA
[17179575.748000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179575.752000] Driver 'sd' needs updating - please use bus_type methods
[17179575.752000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179575.752000] SCSI device sda: drive cache: write back
[17179575.756000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[17179575.756000] SCSI device sda: drive cache: write back
[17179575.756000]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[17179575.828000] sd 0:0:0:0: Attached scsi disk sda
[17179576.484000] usbcore: registered new driver usbfs
[17179576.484000] usbcore: registered new driver hub
[17179576.484000] USB Universal Host Controller Interface driver v2.3
[17179576.484000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 233
[17179576.484000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179576.484000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179576.484000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179576.484000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00008000
[17179576.484000] hub 1-0:1.0: USB hub found
[17179576.484000] hub 1-0:1.0: 2 ports detected
[17179576.588000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 17 (level, low) -> IRQ 50
[17179576.588000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179576.588000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179576.588000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179576.588000] uhci_hcd 0000:00:1d.1: irq 50, io base 0x00008400
[17179576.588000] hub 2-0:1.0: USB hub found
[17179576.588000] hub 2-0:1.0: 2 ports detected
[17179576.692000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 58
[17179576.692000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179576.692000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179576.692000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179576.692000] uhci_hcd 0000:00:1d.2: irq 58, io base 0x00008800
[17179576.692000] hub 3-0:1.0: USB hub found
[17179576.692000] hub 3-0:1.0: 2 ports detected
[17179576.796000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177
[17179576.796000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179576.796000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179576.796000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179576.796000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00009000
[17179576.796000] hub 4-0:1.0: USB hub found
[17179576.796000] hub 4-0:1.0: 2 ports detected
[17179576.900000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 233
[17179576.900000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179576.900000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179576.900000] ehci_hcd 0000:00:1d.7: debug port 1
[17179576.900000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179576.900000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179576.900000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xdddffc00
[17179576.904000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.904000] hub 5-0:1.0: USB hub found
[17179576.904000] hub 5-0:1.0: 8 ports detected
[17179577.028000] Probing IDE interface ide1...
[17179577.692000] Attempting manual resume
[17179577.740000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.756000] kjournald starting.  Commit interval 5 seconds
[17179581.880000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179582.572000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179582.708000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179582.892000] Linux agpgart interface v0.101 (c) Dave Jones
[17179582.928000] agpgart: Detected an Intel 945G Chipset.
[17179582.944000] agpgart: AGP aperture is 256M @ 0x0
[17179582.968000] hw_random: RNG not detected
[17179583.004000] input: PC Speaker as /class/input/input1
[17179583.040000] Real Time Clock Driver v1.12
[17179583.056000] nvidia: module license 'NVIDIA' taints kernel.
[17179583.060000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179583.060000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[17179583.060000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May 15 13:06:38 PDT 2006
[17179583.136000] input: GenPS/2 Genius <NULL> as /class/input/input2
[17179583.204000] Floppy drive(s): fd0 is 1.44M
[17179583.272000] FDC 0 is a post-1991 82077
[17179583.628000] ts: Compaq touchscreen protocol output
[17179583.632000] parport: PnPBIOS parport detected.
[17179583.632000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179583.640000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 177
[17179583.640000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[17179583.644000] eth0: Identified chip type is 'RTL8168B/8111B'.
[17179583.644000] eth0: r10001.02, the Linux device driver for Realtek Ethernet Controllers at 0xc800, 00:17:31:f2:81:e5, IRQ 177
[17179583.644000] eth0: Auto-negotiation Enabled.
[17179584.724000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 177
[17179584.724000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179585.208000] eth0: 100Mbps Full-duplex operation.
[17179585.208000] Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
[17179585.208000] Driver version:1.02
[17179585.208000] Released date:2006/02/23
[17179585.208000] Link Status:Linked
[17179585.208000] Link Speed:100Mbps
[17179585.208000] Duplex mode:Full-Duplex
[17179585.208000] I/O Base:0xC800(I/O port)
[17179585.208000] IRQ:177
[17179585.940000] lp0: using parport0 (interrupt-driven).
[17179585.980000] Adding 1028152k swap on /dev/sda3.  Priority:-1 extents:1 across:1028152k
[17179586.140000] EXT3 FS on sda2, internal journal
[17179586.264000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179586.264000] md: bitmap version 4.39
[17179586.912000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179587.116000] NET: Registered protocol family 17
[17179587.560000] cdrom: open failed.
[17179602.292000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal
[17179603.412000] ReiserFS: sda6: using ordered data mode
[17179603.424000] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179603.424000] ReiserFS: sda6: checking transaction log (sda6)
[17179603.444000] ReiserFS: sda6: Using r5 hash to sort names
[17179603.500000] ReiserFS: sda7: found reiserfs format "3.6" with standard journal
[17179608.184000] ReiserFS: sda7: using ordered data mode
[17179608.208000] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179608.208000] ReiserFS: sda7: checking transaction log (sda7)
[17179608.260000] ReiserFS: sda7: Using r5 hash to sort names
[17179608.416000] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[17179608.856000] ReiserFS: sda5: using ordered data mode
[17179608.872000] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[17179608.872000] ReiserFS: sda5: checking transaction log (sda5)
[17179608.904000] ReiserFS: sda5: Using r5 hash to sort names
[17179614.912000] ACPI: Power Button (FF) [PWRF]
[17179614.912000] ACPI: Power Button (CM) [PWRB]
[17179614.996000] ibm_acpi: ec object not found
[17179615.020000] pcc_acpi: loading...
[17179618.604000] ppdev: user-space parallel port driver
[17179619.480000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[17179619.480000] apm: overridden by ACPI.
[17179625.576000] Bluetooth: Core ver 2.8
[17179625.576000] NET: Registered protocol family 31
[17179625.576000] Bluetooth: HCI device and connection manager initialized
[17179625.576000] Bluetooth: HCI socket layer initialized
[17179625.612000] Bluetooth: L2CAP ver 2.8
[17179625.612000] Bluetooth: L2CAP socket layer initialized
[17179625.636000] Bluetooth: RFCOMM socket layer initialized
[17179625.636000] Bluetooth: RFCOMM TTY layer initialized
[17179625.636000] Bluetooth: RFCOMM ver 1.7
[17179679.692000] NET: Registered protocol family 10
[17179679.696000] lo: Disabled Privacy Extensions
[17179679.696000] IPv6 over IPv4 tunneling driver
[17179689.848000] eth0: no IPv6 routers present
« Poslední změna: 24 Srpna 2010, 00:57:39 od Anna Taliánová »
Linux is like a teepee. No Windows, no Gates, Apache inside

 

Provoz zaštiťuje spolek OpenAlt.