Grub - úprava [vyřešeno]

[pivik]

Ahoj, mám dotaz. Po delší době mě syn donutil doinstalovat Windows XP. Mám ale problém, že jej nemohu nabootovat. Nepomohl mi ani návod na Wiki.

Problém je v tom, že mám 2 disky. První SATA2 na kterém mám Linux a z kterého bootuju (mám tam Grub). Druhý disk je ATA (doufám že se to tak značí) a na ten jsem nainstaloval Windows. Přidal jsem si ho do Grubu ale asi nějak špatně. Může mi někdo prosím poradit?

Kód: [Vybrat]

otas-desktop:/home/otas# fdisk -l

Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x31cb31ca

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        1275    10241406   83  Linux
/dev/sda2            1276        1402     1020127+  82  Linux swap / Solaris
/dev/sda3            1403        2677    10241437+  83  Linux
/dev/sda4            2678       30401   222693030   83  Linux

Disk /dev/hdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xda471d69

   Device Boot      Start         End      Blocks   Id  System
/dev/hdb1   *           1       19456   156280288+   7  HPFS/NTFS
otas-desktop:/home/otas#


Kód: [Vybrat]

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sda1 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(single-user) single
# altoptions=(single-user mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Debian GNU/Linux, kernel 2.6.26-2-686
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/sda1 ro quiet
initrd /boot/initrd.img-2.6.26-2-686

title Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/sda1 ro single
initrd /boot/initrd.img-2.6.26-2-686

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title        Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/hda1
title        Microsoft Windows XP Professional
root      (hd1,0)
savedefault
makeactive
chainloader    +1


[luisah]

Mrkni sem, takto to zapsat nemůžeš v případě více disků.
http://forum.ubuntu.cz/index.php/topic,3194.msg21515.html#msg21515

[pivik]

Díky moc, zabralo to!