Toshiba Satellite L300D-10U [vyřešeno]

[cuco11]

Zdravim, mam problem s mojim NB a UBUNTU 9.04 64BIT. Uz som vyskusal vsetky navody na nete ale stale sa mi to nepodarilo vyriesit. Po nabootovani do Ubuntu je notebook uplne ticho - chladic na procesore sa netoci zopne ho az ked teplota procesora dosiahne 80° a na plne pecky a uz tak ostane az do vypnutia. Nevadi ze ma procesor 28°. Vo win XP sa chladic roztaca podla potreby sluchovo odhadujem ze su cca 4 rychlosti. Dalsia vec je samozrejme nejde nastavenie jasu obrazovky a o hybernacii mozem len snivat. Bios som upgradol na najnovsiu verziu.
Ale zistil som zaujimavu vec ked NB restartnem z WIN do Linuxu (staci len z prihlasovacej obrazovky win) zrazu funguje aj chladenie procesora v poriadku aj nastavenie jasu obrazovky aj pod linuxom. Ked zapnem NB priamo do linuxu tak to nefunguje. Viete mi prosim poradit? Dakujem

[Martin Kiklhorn]

ukažte

Kód: [Vybrat]

dmesg

[cuco11]

Prikladam

Kód: [Vybrat]

[    2.956799] pci 0000:03:00.0: unsupported PM cap regs version (7)
[    2.956897] pci 0000:00:05.0: bridge io port: [0x2000-0x3fff]
[    2.956900] pci 0000:00:05.0: bridge 32bit mmio: [0x8a100000-0x8b0fffff]
[    2.956904] pci 0000:00:05.0: bridge 64bit mmio pref: [0x89000000-0x8a0fffff]
[    2.956963] pci 0000:00:14.4: transparent bridge
[    2.956968] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff]
[    2.956986] bus 00 -> node 0
[    2.956999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    2.957199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    2.957359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    2.957539] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    2.957754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    2.969627] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.969805] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.969980] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.970155] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.970329] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.970504] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.970679] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.970854] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.970989] ACPI: Power Resource [PFA1] (off)
[    2.971131] ACPI: WMI: Mapper loaded
[    2.972120] SCSI subsystem initialized
[    2.972128] libata version 3.00 loaded.
[    2.972128] usbcore: registered new interface driver usbfs
[    2.972128] usbcore: registered new interface driver hub
[    2.972128] usbcore: registered new device driver usb
[    2.972128] PCI: Using ACPI for IRQ routing
[    2.984015] Bluetooth: Core ver 2.13
[    2.988019] NET: Registered protocol family 31
[    2.988021] Bluetooth: HCI device and connection manager initialized
[    2.988024] Bluetooth: HCI socket layer initialized
[    2.988026] NET: Registered protocol family 8
[    2.988028] NET: Registered protocol family 20
[    2.988040] NetLabel: Initializing
[    2.988042] NetLabel:  domain hash size = 128
[    2.988043] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.988059] NetLabel:  unlabeled traffic allowed by default
[    2.988200] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    2.988205] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    2.992088] AppArmor: AppArmor Filesystem Enabled
[    3.000032] Switched to high resolution mode on CPU 0
[    3.000043] Switched to high resolution mode on CPU 1
[    3.004531] pnp: PnP ACPI init
[    3.004545] ACPI: bus type pnp registered
[    3.008654] pnp: PnP ACPI: found 9 devices
[    3.008657] ACPI: ACPI bus type pnp unregistered
[    3.008671] system 00:07: ioport range 0x400-0x4cf has been reserved
[    3.008674] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    3.008677] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[    3.008679] system 00:07: ioport range 0x5a0-0x5bf has been reserved
[    3.008682] system 00:07: ioport range 0x680-0x6ff has been reserved
[    3.008684] system 00:07: ioport range 0x77a-0x77a has been reserved
[    3.008687] system 00:07: ioport range 0xc00-0xc01 has been reserved
[    3.008689] system 00:07: ioport range 0xc14-0xc14 has been reserved
[    3.008692] system 00:07: ioport range 0xc50-0xc52 has been reserved
[    3.008694] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[    3.008697] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[    3.008699] system 00:07: ioport range 0xcd0-0xcdb has been reserved
[    3.008702] system 00:07: ioport range 0x800-0x87f has been reserved
[    3.008704] system 00:07: ioport range 0xb10-0xb1f has been reserved
[    3.008707] system 00:07: ioport range 0xcdc-0xcdf has been reserved
[    3.008711] system 00:07: iomem range 0xff800100-0xff80017f has been reserved
[    3.008717] system 00:08: iomem range 0x0-0x9ffff could not be reserved
[    3.008719] system 00:08: iomem range 0xec000-0xfffff could not be reserved
[    3.008722] system 00:08: iomem range 0x100000-0x7fffffff could not be reserved
[    3.008724] system 00:08: iomem range 0xf4000000-0xf7ffffff has been reserved
[    3.008732] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[    3.008735] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[    3.013458] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    3.013461] pci 0000:00:01.0:   IO window: 0x5000-0x5fff
[    3.013465] pci 0000:00:01.0:   MEM window: 0x8c100000-0x8c2fffff
[    3.013468] pci 0000:00:01.0:   PREFETCH window: 0x00000080000000-0x00000087ffffff
[    3.013472] pci 0000:00:04.0: PCI bridge, secondary bus 0000:09
[    3.013474] pci 0000:00:04.0:   IO window: 0x4000-0x4fff
[    3.013478] pci 0000:00:04.0:   MEM window: 0x8b100000-0x8c0fffff
[    3.013480] pci 0000:00:04.0:   PREFETCH window: 0x00000088000000-0x00000088ffffff
[    3.013484] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
[    3.013487] pci 0000:00:05.0:   IO window: 0x2000-0x3fff
[    3.013490] pci 0000:00:05.0:   MEM window: 0x8a100000-0x8b0fffff
[    3.013492] pci 0000:00:05.0:   PREFETCH window: 0x00000089000000-0x0000008a0fffff
[    3.013496] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80
[    3.013502] pci 0000:00:14.4:   IO window: 0x1000-0x1fff
[    3.013508] pci 0000:00:14.4:   MEM window: disabled
[    3.013512] pci 0000:00:14.4:   PREFETCH window: disabled
[    3.013524] pci 0000:00:01.0: setting latency timer to 64
[    3.013529] pci 0000:00:04.0: setting latency timer to 64
[    3.013534] pci 0000:00:05.0: setting latency timer to 64
[    3.013541] bus: 00 index 0 io port: [0x00-0xffff]
[    3.013544] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    3.013546] bus: 01 index 0 io port: [0x5000-0x5fff]
[    3.013548] bus: 01 index 1 mmio: [0x8c100000-0x8c2fffff]
[    3.013550] bus: 01 index 2 mmio: [0x80000000-0x87ffffff]
[    3.013552] bus: 01 index 3 mmio: [0x0-0x0]
[    3.013554] bus: 09 index 0 io port: [0x4000-0x4fff]
[    3.013555] bus: 09 index 1 mmio: [0x8b100000-0x8c0fffff]
[    3.013557] bus: 09 index 2 mmio: [0x88000000-0x88ffffff]
[    3.013559] bus: 09 index 3 mmio: [0x0-0x0]
[    3.013561] bus: 03 index 0 io port: [0x2000-0x3fff]
[    3.013563] bus: 03 index 1 mmio: [0x8a100000-0x8b0fffff]
[    3.013565] bus: 03 index 2 mmio: [0x89000000-0x8a0fffff]
[    3.013567] bus: 03 index 3 mmio: [0x0-0x0]
[    3.013568] bus: 80 index 0 io port: [0x1000-0x1fff]
[    3.013570] bus: 80 index 1 mmio: [0x0-0x0]
[    3.013572] bus: 80 index 2 mmio: [0x0-0x0]
[    3.013573] bus: 80 index 3 io port: [0x00-0xffff]
[    3.013575] bus: 80 index 4 mmio: [0x000000-0xffffffffffffffff]
[    3.013591] NET: Registered protocol family 2
[    3.048589] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    3.049106] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    3.051230] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    3.051772] TCP: Hash tables configured (established 262144 bind 65536)
[    3.051776] TCP reno registered
[    3.060644] NET: Registered protocol family 1
[    3.060783] checking if image is initramfs... it is
[    3.682832] Freeing initrd memory: 7766k freed
[    3.687486] Simple Boot Flag at 0x44 set to 0x1
[    3.687847] audit: initializing netlink socket (disabled)
[    3.687861] type=2000 audit(1253305145.684:1): initialized
[    3.696365] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.697757] VFS: Disk quotas dquot_6.5.1
[    3.697832] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.698479] fuse init (API version 7.10)
[    3.698563] msgmni has been set to 3715
[    3.698793] alg: No test for stdrng (krng)
[    3.698808] io scheduler noop registered
[    3.698810] io scheduler anticipatory registered
[    3.698812] io scheduler deadline registered
[    3.698857] io scheduler cfq registered (default)
[   11.696031] pci 0000:00:13.5: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[   11.696056] pci 0000:01:05.0: Boot video device
[   11.700020] pcieport-driver 0000:00:04.0: setting latency timer to 64
[   11.700044] pcieport-driver 0000:00:04.0: found MSI capability
[   11.700063] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[   11.700071] pci_express 0000:00:04.0:pcie00: allocate port service
[   11.700089] pci_express 0000:00:04.0:pcie03: allocate port service
[   11.700131] pcieport-driver 0000:00:05.0: setting latency timer to 64
[   11.700150] pcieport-driver 0000:00:05.0: found MSI capability
[   11.700164] pcieport-driver 0000:00:05.0: irq 2302 for MSI/MSI-X
[   11.700171] pci_express 0000:00:05.0:pcie00: allocate port service
[   11.700183] pci_express 0000:00:05.0:pcie03: allocate port service
[   11.700233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.700242] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   11.700414] ACPI: AC Adapter [ADP0] (on-line)
[   11.704559] ACPI: Battery Slot [BAT0] (battery present)
[   11.704660] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   11.704663] ACPI: Power Button (FF) [PWRF]
[   11.704709] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[   11.704711] ACPI: Power Button (CM) [PWRB]
[   11.704756] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[   11.708283] ACPI: Lid Switch [LID]
[   11.708485] fan PNP0C0B:00: registered as cooling_device0
[   11.708491] ACPI: Fan [FAN1] (off)
[   11.708762] ACPI: processor limited to max C-state 1
[   11.708818] processor ACPI_CPU:00: registered as cooling_device1
[   11.708823] ACPI: Processor [CPU0] (supports 8 throttling states)
[   11.708878] processor ACPI_CPU:01: registered as cooling_device2
[   11.721361] thermal LNXTHERM:01: registered as thermal_zone0
[   11.741818] ACPI: Thermal Zone [THZN] (50 C)
[   11.764184] Linux agpgart interface v0.103
[   11.764196] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[   11.765167] brd: module loaded
[   11.765495] loop: module loaded
[   11.765599] Fixed MDIO Bus: probed
[   11.765605] PPP generic driver version 2.4.2
[   11.765675] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[   11.765714] Driver 'sd' needs updating - please use bus_type methods
[   11.765722] Driver 'sr' needs updating - please use bus_type methods
[   11.765760] ahci 0000:00:12.0: version 3.0
[   11.765789] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.765836] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[   11.765934] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[   11.765938] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
[   11.766461] scsi0 : ahci
[   11.766612] scsi1 : ahci
[   11.766691] scsi2 : ahci
[   11.766766] scsi3 : ahci
[   11.766867] ata1: SATA max UDMA/133 abar m1024@0x8c309000 port 0x8c309100 irq 22
[   11.766871] ata2: SATA max UDMA/133 abar m1024@0x8c309000 port 0x8c309180 irq 22
[   11.766875] ata3: SATA max UDMA/133 abar m1024@0x8c309000 port 0x8c309200 irq 22
[   11.766878] ata4: SATA max UDMA/133 abar m1024@0x8c309000 port 0x8c309280 irq 22
[   12.248035] ata1: softreset failed (device not ready)
[   12.248076] ata1: failed due to HW bug, retry pmp=0
[   12.412042] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   12.412526] ata1.00: ATA-8: FUJITSU MHY2250BH, 0040020B, max UDMA/100
[   12.412529] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   12.412547] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[   12.413143] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[   12.413146] ata1.00: configured for UDMA/100
[   12.748047] ata2: SATA link down (SStatus 0 SControl 300)
[   13.084045] ata3: SATA link down (SStatus 0 SControl 300)
[   13.420045] ata4: SATA link down (SStatus 0 SControl 300)
[   13.436081] isa bounce pool size: 16 pages
[   13.436171] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHY2250B 0040 PQ: 0 ANSI: 5
[   13.436279] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[   13.436296] sd 0:0:0:0: [sda] Write Protect is off
[   13.436298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.436323] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.436390] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[   13.436403] sd 0:0:0:0: [sda] Write Protect is off
[   13.436405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.436428] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.436432]  sda: sda1 sda2 < sda5 > sda3 sda4
[   13.555468] sd 0:0:0:0: [sda] Attached SCSI disk
[   13.555541] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   13.555830] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.555870] pata_atiixp 0000:00:14.1: setting latency timer to 64
[   13.556024] scsi4 : pata_atiixp
[   13.556118] scsi5 : pata_atiixp
[   13.557443] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq 14
[   13.557446] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15
[   13.720517] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JW02, max UDMA/33
[   13.736456] ata5.00: configured for UDMA/33
[   13.895694] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JW02 PQ: 0 ANSI: 5
[   13.906893] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   13.906896] Uniform CD-ROM driver Revision: 3.20
[   13.907015] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   13.907065] sr 4:0:0:0: Attached scsi generic sg1 type 5
[   13.907486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.907628] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
[   13.907650] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[   13.907673] ehci_hcd 0000:00:13.5: setting latency timer to 64
[   13.907677] ehci_hcd 0000:00:13.5: EHCI Host Controller
[   13.907748] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[   13.907784] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[   13.907803] ehci_hcd 0000:00:13.5: debug port 1
[   13.907833] ehci_hcd 0000:00:13.5: irq 19, io mem 0x8c309400
[   13.916048] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[   13.916132] usb usb1: configuration #1 chosen from 1 choice
[   13.916162] hub 1-0:1.0: USB hub found
[   13.916171] hub 1-0:1.0: 10 ports detected
[   13.916313] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.916339] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.916357] ohci_hcd 0000:00:13.0: setting latency timer to 64
[   13.916361] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   13.916418] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[   13.916456] ohci_hcd 0000:00:13.0: irq 16, io mem 0x8c308000
[   13.976079] usb usb2: configuration #1 chosen from 1 choice
[   13.976104] hub 2-0:1.0: USB hub found
[   13.976116] hub 2-0:1.0: 2 ports detected
[   13.976217] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   13.976230] ohci_hcd 0000:00:13.1: setting latency timer to 64
[   13.976234] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   13.976275] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[   13.976308] ohci_hcd 0000:00:13.1: irq 17, io mem 0x8c307000
[   14.032065] usb usb3: configuration #1 chosen from 1 choice
[   14.032089] hub 3-0:1.0: USB hub found
[   14.032102] hub 3-0:1.0: 2 ports detected
[   14.032209] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   14.032225] ohci_hcd 0000:00:13.2: setting latency timer to 64
[   14.032228] ohci_hcd 0000:00:13.2: OHCI Host Controller
[   14.032275] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[   14.032308] ohci_hcd 0000:00:13.2: irq 18, io mem 0x8c306000
[   14.088065] usb usb4: configuration #1 chosen from 1 choice
[   14.088092] hub 4-0:1.0: USB hub found
[   14.088105] hub 4-0:1.0: 2 ports detected
[   14.088199] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.088212] ohci_hcd 0000:00:13.3: setting latency timer to 64
[   14.088215] ohci_hcd 0000:00:13.3: OHCI Host Controller
[   14.088262] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[   14.088282] ohci_hcd 0000:00:13.3: irq 17, io mem 0x8c305000
[   14.144071] usb usb5: configuration #1 chosen from 1 choice
[   14.144094] hub 5-0:1.0: USB hub found
[   14.144106] hub 5-0:1.0: 2 ports detected
[   14.144195] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   14.144208] ohci_hcd 0000:00:13.4: setting latency timer to 64
[   14.144211] ohci_hcd 0000:00:13.4: OHCI Host Controller
[   14.144253] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[   14.144272] ohci_hcd 0000:00:13.4: irq 18, io mem 0x8c304000
[   14.200060] usb usb6: configuration #1 chosen from 1 choice
[   14.200081] hub 6-0:1.0: USB hub found
[   14.200091] hub 6-0:1.0: 2 ports detected
[   14.200190] uhci_hcd: USB Universal Host Controller Interface driver
[   14.200286] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   14.231347] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.231354] serio: i8042 AUX port at 0x60,0x64 irq 12
[   14.240574] mice: PS/2 mouse device common for all mice
[   14.288034] usb 1-6: new high speed USB device using ehci_hcd and address 3
[   14.288630] rtc_cmos 00:03: RTC can wake from S4
[   14.288687] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   14.288724] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[   14.288792] device-mapper: uevent: version 1.0.3
[   14.288913] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   14.289104] device-mapper: multipath: version 1.0.5 loaded
[   14.289106] device-mapper: multipath round-robin: version 1.0.0 loaded
[   14.289326] cpuidle: using governor ladder
[   14.289328] cpuidle: using governor menu
[   14.289763] TCP cubic registered
[   14.289839] NET: Registered protocol family 10
[   14.290247] lo: Disabled Privacy Extensions
[   14.290526] NET: Registered protocol family 17
[   14.290551] Bluetooth: L2CAP ver 2.11
[   14.290552] Bluetooth: L2CAP socket layer initialized
[   14.290555] Bluetooth: SCO (Voice Link) ver 0.6
[   14.290556] Bluetooth: SCO socket layer initialized
[   14.290618] Bluetooth: RFCOMM socket layer initialized
[   14.290626] Bluetooth: RFCOMM TTY layer initialized
[   14.290627] Bluetooth: RFCOMM ver 1.10
[   14.290691] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 processors (2 cpu cores) (version 2.20.00)
[   14.290760] powernow-k8:    0 : fid 0xb (1900 MHz), vid 0x13
[   14.290763] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x14
[   14.290765] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x15
[   14.290766] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1a
[   14.290927] registered taskstats version 1
[   14.291078]   Magic number: 9:763:346
[   14.291103] tty tty63: hash matches
[   14.291173] rtc_cmos 00:03: setting system clock to 2009-09-18 20:19:16 UTC (1253305156)
[   14.291176] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.291178] EDD information not available.
[   14.291255] Freeing unused kernel memory: 536k freed
[   14.291554] Write protecting the kernel read-only data: 6688k
[   14.318820] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[   14.434874] usb 1-6: configuration #1 chosen from 1 choice
[   14.526137] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   14.526158] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   14.526179] r8169 0000:03:00.0: setting latency timer to 64
[   14.526262] r8169 0000:03:00.0: irq 2301 for MSI/MSI-X
[   14.526852] eth0: RTL8102e at 0xffffc20000072000, 00:1e:33:3d:70:9e, XID 34a00000 IRQ 2301
[   14.556035] usb 1-8: new high speed USB device using ehci_hcd and address 4
[   14.728317] usb 1-8: configuration #1 chosen from 1 choice
[   14.992049] usb 2-1: new low speed USB device using ohci_hcd and address 2
[   15.103360] PM: Starting manual resume from disk
[   15.103365] PM: Resume from partition 8:4
[   15.103367] PM: Checking hibernation image.
[   15.103610] PM: Resume from disk failed.
[   15.129647] EXT4-fs: barriers enabled
[   15.148793] kjournald2 starting.  Commit interval 5 seconds
[   15.148807] EXT4-fs: delayed allocation enabled
[   15.148809] EXT4-fs: file extents enabled
[   15.148922] EXT4-fs: mballoc enabled
[   15.148927] EXT4-fs: mounted filesystem with ordered data mode.
[   15.177168] usb 2-1: configuration #1 chosen from 1 choice
[   22.418414] udev: starting version 141
[   22.943845] acpi device:04: registered as cooling_device3
[   22.944040] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input5
[   22.972674] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   23.120635] cfg80211: Calling CRDA to update world regulatory domain
[   23.135303] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   23.214853] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.262001] cfg80211: World regulatory domain updated:
[   23.262005] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.262008] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.262011] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.262013] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.262015] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.262017] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.291122] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   23.329724] usbcore: registered new interface driver hiddev
[   23.334623] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input7
[   23.364686] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0
[   23.364713] usbcore: registered new interface driver usbhid
[   23.364738] usbhid: v2.6:USB HID core driver
[   23.429127] Linux video capture interface: v2.00
[   23.622554] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   23.650497] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
[   23.652091] input: CNF7051 as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input8
[   23.668723] usbcore: registered new interface driver uvcvideo
[   23.668748] USB Video Class driver (v0.1.0)
[   24.110288] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   24.142794] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[   24.253254] rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
[   24.253257]          hardware, use at your own risk
[   24.254197] phy0: Selected rate control algorithm 'pid'
[   24.319936] phy0: hwaddr 00:1b:9e:eb:7e:9a, RTL8187BvE V0 + rtl8225z2
[   24.319976] usbcore: registered new interface driver rtl8187
[   24.499819] lp: driver loaded but no devices found
[   24.619955] Adding 570296k swap on /dev/sda4.  Priority:-1 extents:1 across:570296k
[   24.650044] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
[   24.725397] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   47.528458] EXT4-fs warning: maximal mount count reached, running e2fsck is recommended
[   47.528719] EXT4 FS on sda3, internal journal on sda3:8
[   49.427222] type=1505 audit(1253297991.632:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2321
[   49.482857] type=1505 audit(1253297991.688:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2325
[   49.483012] type=1505 audit(1253297991.688:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2325
[   49.483063] type=1505 audit(1253297991.688:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2325
[   49.483114] type=1505 audit(1253297991.688:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2325
[   49.659465] type=1505 audit(1253297991.864:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2336
[   49.659672] type=1505 audit(1253297991.864:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2336
[   49.710044] type=1505 audit(1253297991.917:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2340
[   49.744405] type=1505 audit(1253297991.949:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2344
[   52.504042] Clocksource tsc unstable (delta = -289667604 ns)
[   59.511711] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   59.775242] ppdev: user-space parallel port driver
[   59.857101] [drm] Initialized drm 1.1.0 20060810
[   59.970891] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   61.018611] [drm] Setting GART location based on new memory map
[   61.018899] [drm] Loading RS690/RS740 Microcode
[   61.018919] [drm] Num pipes: 1
[   61.018926] [drm] writeback test succeeded in 1 usecs
[   63.791750] r8169: eth0: link up
[   63.791758] r8169: eth0: link up
[   74.336050] eth0: no IPv6 routers present
[   79.859004] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   83.971741] wlan0: direct probe to AP 00:02:72:74:6d:aa try 1
[   84.170174] wlan0: direct probe to AP 00:02:72:74:6d:aa try 2
[   84.368538] wlan0: direct probe to AP 00:02:72:74:6d:aa try 3
[   84.568544] wlan0: direct probe to AP 00:02:72:74:6d:aa timed out
[  103.805634] CPU0 attaching NULL sched-domain.
[  103.805643] CPU1 attaching NULL sched-domain.
[  103.816087] CPU0 attaching sched-domain:
[  103.816090]  domain 0: span 0-1 level CPU
[  103.816093]   groups: 0 1
[  103.816098] CPU1 attaching sched-domain:
[  103.816100]  domain 0: span 0-1 level CPU
[  103.816102]   groups: 1 0
[  119.360246] process `skype.real' is using obsolete setsockopt SO_BSDCOMPAT
[  430.833393] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2353.904514] UDF-fs: Partition marked readonly; forcing readonly mount
[ 2354.119883] UDF-fs INFO UDF: Mounting volume 'Disc', timestamp 2009/07/20 21:12 (1078)
[ 2398.336792] warning: `growisofs' uses 32-bit capabilities (legacy support in use)
[ 2701.010520] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2701.010528] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 2701.010534] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 2701.010543] end_request: I/O error, dev sr0, sector 64
[ 2701.010550] Buffer I/O error on device sr0, logical block 8
[ 2707.012011] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2707.012018] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 2707.012023] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 2707.012032] end_request: I/O error, dev sr0, sector 64
[ 2707.012038] Buffer I/O error on device sr0, logical block 8
[ 2713.043463] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2713.043477] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 2713.043487] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 2713.043506] end_request: I/O error, dev sr0, sector 0
[ 2713.043518] Buffer I/O error on device sr0, logical block 0
[ 2713.043534] Buffer I/O error on device sr0, logical block 1
[ 2713.043541] Buffer I/O error on device sr0, logical block 2
[ 2713.043548] Buffer I/O error on device sr0, logical block 3
[ 2719.055528] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2719.055543] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 2719.055553] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 2719.055577] end_request: I/O error, dev sr0, sector 0
[ 2719.055590] Buffer I/O error on device sr0, logical block 0
[ 2768.673691] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2768.673697] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 2768.673701] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 2768.673710] end_request: I/O error, dev sr0, sector 64
[ 2768.673716] Buffer I/O error on device sr0, logical block 8
[ 2774.661912] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2774.661926] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 2774.661936] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 2774.661956] end_request: I/O error, dev sr0, sector 64
[ 2774.661970] Buffer I/O error on device sr0, logical block 8
[ 2780.993541] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2780.993556] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 2780.993566] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 2780.993586] end_request: I/O error, dev sr0, sector 64
[ 2780.993600] Buffer I/O error on device sr0, logical block 8
[ 2786.985520] sr 4:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 2786.985535] sr 4:0:0:0: [sr0] Sense Key : Medium Error [current]
[ 2786.985546] sr 4:0:0:0: [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
[ 2786.985567] end_request: I/O error, dev sr0, sector 64
[ 2786.985583] Buffer I/O error on device sr0, logical block 8
[ 2942.819609] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2942.819637] ata5.00: cmd a0/01:00:00:00:80/00:00:00:00:00/a0 tag 0 dma 32768 out
[ 2942.819640]          cdb 2a 00 00 01 ef 20 00 00  10 00 00 00 00 00 00 00
[ 2942.819643]          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2942.819651] ata5.00: status: { DRDY }
[ 2947.828534] ata5: link is slow to respond, please be patient (ready=0)
[ 2952.852560] ata5: device not ready (errno=-16), forcing hardreset
[ 2952.852582] ata5: soft resetting link
[ 2953.033090] ata5.00: configured for UDMA/33
[ 2953.035376] ata5: EH complete
[ 2963.804560] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2963.804572] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2963.804573]          cdb 1e 00 00 00 01 00 00 00  00 00 00 00 00 00 00 00
[ 2963.804575]          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2963.804578] ata5.00: status: { DRDY }
[ 2968.832127] ata5: link is slow to respond, please be patient (ready=0)
[ 2973.836065] ata5: device not ready (errno=-16), forcing hardreset
[ 2973.836087] ata5: soft resetting link
[ 2974.016537] ata5.00: configured for UDMA/33
[ 2974.018836] ata5: EH complete
[ 2984.804109] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2984.804134] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 2984.804137]          cdb 1e 00 00 00 01 00 00 00  00 00 00 00 00 00 00 00
[ 2984.804140]          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 2984.804147] ata5.00: status: { DRDY }
[ 2989.844056] ata5: link is slow to respond, please be patient (ready=0)
[ 2994.829820] ata5: device not ready (errno=-16), forcing hardreset
[ 2994.829832] ata5: soft resetting link
[ 2995.024465] ata5.00: configured for UDMA/33
[ 2995.027228] ata5: EH complete
[ 3005.804197] ata5.00: limiting speed to UDMA/25:PIO4
[ 3005.804210] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3005.804230] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 3005.804232]          cdb 1e 00 00 00 01 00 00 00  00 00 00 00 00 00 00 00
[ 3005.804235]          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3005.804242] ata5.00: status: { DRDY }
[ 3010.856042] ata5: link is slow to respond, please be patient (ready=0)
[ 3015.852068] ata5: device not ready (errno=-16), forcing hardreset
[ 3015.852089] ata5: soft resetting link
[ 3016.036648] ata5.00: configured for UDMA/25
[ 3016.038859] ata5: EH complete
[ 3026.816079] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 3026.816091] ata5.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 3026.816093]          cdb 1e 00 00 00 01 00 00 00  00 00 00 00 00 00 00 00
[ 3026.816094]          res 40/00:02:00:0c:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 3026.816097] ata5.00: status: { DRDY }
[ 3031.824066] ata5: link is slow to respond, please be patient (ready=0)
[ 3036.088599] ata5: soft resetting link
[ 3036.269084] ata5.00: configured for UDMA/25
[ 3036.271386] ata5: EH complete
[ 3099.398957] UDF-fs: Partition marked readonly; forcing readonly mount
[ 3099.674564] UDF-fs INFO UDF: Mounting volume 'Disc', timestamp 2009/08/05 15:46 (1078)
[ 3137.079746] UDF-fs: Partition marked readonly; forcing readonly mount
[ 3137.354406] UDF-fs INFO UDF: Mounting volume 'Disc', timestamp 2009/08/05 15:46 (1078)
[ 3179.561448] UDF-fs: Partition marked readonly; forcing readonly mount
[ 3179.835127] UDF-fs INFO UDF: Mounting volume 'Disc', timestamp 2009/08/05 15:46 (1078)
[ 4165.970606] CE: hpet increasing min_delta_ns to 15000 nsec
peter@peter-laptop:~$


[Martin Kiklhorn]

nic tam nevidím, ale nechybí tam náhodu začátek?

[cuco11]

chybajuca cast vypisu

Kód: [Vybrat]

peter@peter-laptop:~$ dmesg
[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-15-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #52-Ubuntu SMP Wed Sep 9 10:48:52 UTC 2009 (Ubuntu 2.6.28-15.52-generic)
[    0.000000] Command line: root=UUID=b7e035d6-0f0e-4943-925b-1a005e61bb12 ro quiet splash acpi_osi="Linux"
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000077c0d000 (usable)
[    0.000000]  BIOS-e820: 0000000077c0d000 - 0000000077cb8000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000077cb8000 - 0000000077cf0000 (usable)
[    0.000000]  BIOS-e820: 0000000077cf0000 - 0000000077cf1000 (reserved)
[    0.000000]  BIOS-e820: 0000000077cf1000 - 0000000077d30000 (usable)
[    0.000000]  BIOS-e820: 0000000077d30000 - 0000000077d33000 (reserved)
[    0.000000]  BIOS-e820: 0000000077d33000 - 0000000077dbb000 (usable)
[    0.000000]  BIOS-e820: 0000000077dbb000 - 0000000077dbf000 (reserved)
[    0.000000]  BIOS-e820: 0000000077dbf000 - 0000000077e85000 (usable)
[    0.000000]  BIOS-e820: 0000000077e85000 - 0000000077ebf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000077ebf000 - 0000000077eef000 (usable)
[    0.000000]  BIOS-e820: 0000000077eef000 - 0000000077eff000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000077eff000 - 0000000077f00000 (usable)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x77f00 max_arch_pfn = 0x3ffffffff
[    0.000000] Scanning 2 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 0000000000008000 (usable)
[    0.000000]  modified: 0000000000008000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 0000000000092c00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000077c0d000 (usable)
[    0.000000]  modified: 0000000077c0d000 - 0000000077cb8000 (ACPI NVS)
[    0.000000]  modified: 0000000077cb8000 - 0000000077cf0000 (usable)
[    0.000000]  modified: 0000000077cf0000 - 0000000077cf1000 (reserved)
[    0.000000]  modified: 0000000077cf1000 - 0000000077d30000 (usable)
[    0.000000]  modified: 0000000077d30000 - 0000000077d33000 (reserved)
[    0.000000]  modified: 0000000077d33000 - 0000000077dbb000 (usable)
[    0.000000]  modified: 0000000077dbb000 - 0000000077dbf000 (reserved)
[    0.000000]  modified: 0000000077dbf000 - 0000000077e85000 (usable)
[    0.000000]  modified: 0000000077e85000 - 0000000077ebf000 (ACPI NVS)
[    0.000000]  modified: 0000000077ebf000 - 0000000077eef000 (usable)
[    0.000000]  modified: 0000000077eef000 - 0000000077eff000 (ACPI data)
[    0.000000]  modified: 0000000077eff000 - 0000000077f00000 (usable)
[    0.000000]  modified: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] init_memory_mapping: 0000000000000000-0000000077f00000
[    0.000000]  0000000000 - 0077e00000 page 2M
[    0.000000]  0077e00000 - 0077f00000 page 4k
[    0.000000] kernel direct mapping tables up to 77f00000 @ 10000-14000
[    0.000000] last_map_addr: 77f00000 end: 77f00000
[    0.000000] RAMDISK: 3785a000 - 37fef8f4
[    0.000000] ACPI: RSDP 000FE020, 0024 (r2 TOSINV)
[    0.000000] ACPI: XSDT 77EFE120, 005C (r1 TOSINV TOSINV00        3       1000013)
[    0.000000] ACPI: FACP 77EFD000, 00F4 (r4 TOSINV TOSINV00        3 MSFT  1000013)
[    0.000000] ACPI: DSDT 77EF2000, 71F8 (r1 TOSINV TOSINV00 F0000000 MSFT  1000013)
[    0.000000] ACPI: FACS 77E8E000, 0040
[    0.000000] ACPI: HPET 77EFC000, 0038 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: APIC 77EFB000, 0084 (r2 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: MCFG 77EFA000, 003C (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: SLIC 77EF1000, 0176 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: BOOT 77EF0000, 0028 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: SSDT 77EEF000, 0210 (r1 AMD    PowerNow        1 AMD         1)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 0077f00000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 0000b7cbb0]    TEXT DATA BSS ==> [0000200000 - 0000b7cbb0]
[    0.000000]   #3 [003785a000 - 0037fef8f4]          RAMDISK ==> [003785a000 - 0037fef8f4]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]  [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[10] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000001
[    0.000000]     0: 0x00000006 -> 0x00000008
[    0.000000]     0: 0x00000010 -> 0x00000092
[    0.000000]     0: 0x00000100 -> 0x00077c0d
[    0.000000]     0: 0x00077cb8 -> 0x00077cf0
[    0.000000]     0: 0x00077cf1 -> 0x00077d30
[    0.000000]     0: 0x00077d33 -> 0x00077dbb
[    0.000000]     0: 0x00077dbf -> 0x00077e85
[    0.000000]     0: 0x00077ebf -> 0x00077eef
[    0.000000]     0: 0x00077eff -> 0x00077f00
[    0.000000] On node 0 totalpages: 490888
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 2529 pages reserved
[    0.000000]   DMA zone: 1388 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6661 pages used for memmap
[    0.000000]   DMA32 zone: 480254 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000077c0d000 - 0000000077cb8000
[    0.000000] PM: Registered nosave memory: 0000000077cf0000 - 0000000077cf1000
[    0.000000] PM: Registered nosave memory: 0000000077d30000 - 0000000077d33000
[    0.000000] PM: Registered nosave memory: 0000000077dbb000 - 0000000077dbf000
[    0.000000] PM: Registered nosave memory: 0000000077e85000 - 0000000077ebf000
[    0.000000] PM: Registered nosave memory: 0000000077eef000 - 0000000077eff000
[    0.000000] Allocating PCI resources starting at 78000000 (gap: 77f00000:7c100000)
[    0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 481642
[    0.000000] Kernel command line: root=UUID=b7e035d6-0f0e-4943-925b-1a005e61bb12 ro quiet splash acpi_osi="Linux"
[    0.000000] ACPI: Added _OSI(Linux)
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1899.624 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.004000] allocated 19660800 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Checking aperture...
[    0.004000] No AGP bridge found
[    0.004000] Node 0: aperture @ 40ce000000 size 32 MB
[    0.004000] Aperture beyond 4GB. Ignoring.
[    0.004000] Memory: 1893984k/1965056k available (4749k kernel code, 1504k absent, 68856k reserved, 2523k data, 536k init)
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.24 BogoMIPS (lpj=7598496)
[    0.004033] Security Framework initialized
[    0.004041] SELinux:  Disabled at boot.
[    0.004054] AppArmor: AppArmor initialized
[    0.004063] Mount-cache hash table entries: 256
[    0.004221] Initializing cgroup subsys ns
[    0.004225] Initializing cgroup subsys cpuacct
[    0.004227] Initializing cgroup subsys memory
[    0.004231] Initializing cgroup subsys freezer
[    0.004243] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004245] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004247] tseg: 0077f00000
[    0.004249] CPU: Physical Processor ID: 0
[    0.004250] CPU: Processor Core ID: 0
[    0.004253] using C1E aware idle routine
[    0.005942] ACPI: Core revision 20080926
[    0.008573] ACPI: Checking initramfs for custom DSDT
[    0.316072] Setting APIC routing to flat
[    0.316697] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.359600] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02
[    0.360001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3799.92 BogoMIPS (lpj=7599850)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.444111] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02
[    0.444161] Brought up 2 CPUs
[    0.444163] Total of 2 processors activated (7599.17 BogoMIPS).
[    0.444159] System has AMD C1E enabled
[    0.444159] Switch to broadcast mode on CPU1
[    0.444282] CPU0 attaching sched-domain:
[    0.444284]  domain 0: span 0-1 level CPU
[    0.444287]   groups: 0 1
[    0.444292] CPU1 attaching sched-domain:
[    0.444294]  domain 0: span 0-1 level CPU
[    0.444296]   groups: 1 0
[    0.444368] Switch to broadcast mode on CPU0
[    0.444368] net_namespace: 1400 bytes
[    0.444368] Booting paravirtualized kernel on bare hardware
[    0.444368] Time: 20:19:02  Date: 09/18/09
[    0.444368] regulator: core version 0.5
[    0.444368] NET: Registered protocol family 16
[    0.444368] TOM: 0000000080000000 aka 2048M
[    0.444368] ACPI: bus type pci registered
[    0.444368] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
[    0.444368] PCI: MCFG area at f4000000 reserved in E820
[    0.449127] PCI: Using MMCONFIG at f4000000 - f7ffffff
[    0.449129] PCI: Using configuration type 1 for base access
[    0.449793] ACPI: EC: Look up EC in DSDT
[    2.460020] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    2.944112] ACPI: Interpreter enabled
[    2.944118] ACPI: (supports S0 S1 S3 S4 S5)
[    2.944150] ACPI: Using IOAPIC for interrupt routing
[    2.955435] ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
[    2.955439] ACPI: EC: driver started in interrupt mode
[    2.955598] ACPI: No dock devices found.
[    2.955608] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    2.955699] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    2.955702] pci 0000:00:04.0: PME# disabled
[    2.955724] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    2.955727] pci 0000:00:05.0: PME# disabled
[    2.955782] pci 0000:00:12.0: reg 10 io port: [0x6038-0x603f]
[    2.955789] pci 0000:00:12.0: reg 14 io port: [0x604c-0x604f]
[    2.955796] pci 0000:00:12.0: reg 18 io port: [0x6030-0x6037]
[    2.955803] pci 0000:00:12.0: reg 1c io port: [0x6048-0x604b]
[    2.955810] pci 0000:00:12.0: reg 20 io port: [0x6010-0x601f]
[    2.955818] pci 0000:00:12.0: reg 24 32bit mmio: [0x8c309000-0x8c3093ff]
[    2.955837] pci 0000:00:12.0: set SATA to AHCI mode
[    2.955866] pci 0000:00:13.0: reg 10 32bit mmio: [0x8c308000-0x8c308fff]
[    2.955921] pci 0000:00:13.1: reg 10 32bit mmio: [0x8c307000-0x8c307fff]
[    2.955976] pci 0000:00:13.2: reg 10 32bit mmio: [0x8c306000-0x8c306fff]
[    2.956044] pci 0000:00:13.3: reg 10 32bit mmio: [0x8c305000-0x8c305fff]
[    2.956099] pci 0000:00:13.4: reg 10 32bit mmio: [0x8c304000-0x8c304fff]
[    2.956175] pci 0000:00:13.5: reg 10 32bit mmio: [0x8c309400-0x8c3094ff]
[    2.956215] pci 0000:00:13.5: supports D1 D2
[    2.956217] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    2.956221] pci 0000:00:13.5: PME# disabled
[    2.956267] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[    2.956328] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[    2.956335] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[    2.956342] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[    2.956349] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[    2.956356] pci 0000:00:14.1: reg 20 io port: [0x6000-0x600f]
[    2.956408] pci 0000:00:14.2: reg 10 64bit mmio: [0x8c300000-0x8c303fff]
[    2.956443] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    2.956448] pci 0000:00:14.2: PME# disabled
[    2.956626] pci 0000:01:05.0: reg 10 64bit mmio: [0x80000000-0x87ffffff]
[    2.956632] pci 0000:01:05.0: reg 18 64bit mmio: [0x8c200000-0x8c20ffff]
[    2.956636] pci 0000:01:05.0: reg 20 io port: [0x5000-0x50ff]
[    2.956639] pci 0000:01:05.0: reg 24 32bit mmio: [0x8c100000-0x8c1fffff]
[    2.956646] pci 0000:01:05.0: supports D1 D2
[    2.956662] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff]
[    2.956664] pci 0000:00:01.0: bridge 32bit mmio: [0x8c100000-0x8c2fffff]
[    2.956668] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x87ffffff]
[    2.956718] pci 0000:00:04.0: bridge io port: [0x4000-0x4fff]
[    2.956720] pci 0000:00:04.0: bridge 32bit mmio: [0x8b100000-0x8c0fffff]
[    2.956724] pci 0000:00:04.0: bridge 64bit mmio pref: [0x88000000-0x88ffffff]
[    2.956759] pci 0000:03:00.0: reg 10 io port: [0x2000-0x20ff]
[    2.956774] pci 0000:03:00.0: reg 18 64bit mmio: [0x89010000-0x89010fff]
[    2.956785] pci 0000:03:00.0: reg 20 64bit mmio: [0x89000000-0x8900ffff]


[Martin Kiklhorn]

bez toho parametru

acpi_osi="Linux"

se počítač chová jak? Případmě opět dmesg

[cuco11]

bez toho acpi_osi="Linux" to neslo tiez to som niekde nasiel na fore ze to na toshiby zabera ale na moju to nezabralo pripajam listing z nabootovania bez neho: 1 cast sprava je dlha na toto forum

Kód: [Vybrat]

peter@peter-laptop:~$ dmesg
[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-15-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #52-Ubuntu SMP Wed Sep 9 10:48:52 UTC 2009 (Ubuntu 2.6.28-15.52-generic)
[    0.000000] Command line: root=UUID=b7e035d6-0f0e-4943-925b-1a005e61bb12 ro quiet splash
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000077c0d000 (usable)
[    0.000000]  BIOS-e820: 0000000077c0d000 - 0000000077cb8000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000077cb8000 - 0000000077cf0000 (usable)
[    0.000000]  BIOS-e820: 0000000077cf0000 - 0000000077cf1000 (reserved)
[    0.000000]  BIOS-e820: 0000000077cf1000 - 0000000077d30000 (usable)
[    0.000000]  BIOS-e820: 0000000077d30000 - 0000000077d33000 (reserved)
[    0.000000]  BIOS-e820: 0000000077d33000 - 0000000077dbb000 (usable)
[    0.000000]  BIOS-e820: 0000000077dbb000 - 0000000077dbf000 (reserved)
[    0.000000]  BIOS-e820: 0000000077dbf000 - 0000000077e85000 (usable)
[    0.000000]  BIOS-e820: 0000000077e85000 - 0000000077ebf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000077ebf000 - 0000000077eef000 (usable)
[    0.000000]  BIOS-e820: 0000000077eef000 - 0000000077eff000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000077eff000 - 0000000077f00000 (usable)
[    0.000000]  BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x77f00 max_arch_pfn = 0x3ffffffff
[    0.000000] Scanning 2 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000001000 (usable)
[    0.000000]  modified: 0000000000001000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 0000000000008000 (usable)
[    0.000000]  modified: 0000000000008000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 0000000000092c00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 0000000077c0d000 (usable)
[    0.000000]  modified: 0000000077c0d000 - 0000000077cb8000 (ACPI NVS)
[    0.000000]  modified: 0000000077cb8000 - 0000000077cf0000 (usable)
[    0.000000]  modified: 0000000077cf0000 - 0000000077cf1000 (reserved)
[    0.000000]  modified: 0000000077cf1000 - 0000000077d30000 (usable)
[    0.000000]  modified: 0000000077d30000 - 0000000077d33000 (reserved)
[    0.000000]  modified: 0000000077d33000 - 0000000077dbb000 (usable)
[    0.000000]  modified: 0000000077dbb000 - 0000000077dbf000 (reserved)
[    0.000000]  modified: 0000000077dbf000 - 0000000077e85000 (usable)
[    0.000000]  modified: 0000000077e85000 - 0000000077ebf000 (ACPI NVS)
[    0.000000]  modified: 0000000077ebf000 - 0000000077eef000 (usable)
[    0.000000]  modified: 0000000077eef000 - 0000000077eff000 (ACPI data)
[    0.000000]  modified: 0000000077eff000 - 0000000077f00000 (usable)
[    0.000000]  modified: 00000000f4000000 - 00000000f8000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] init_memory_mapping: 0000000000000000-0000000077f00000
[    0.000000]  0000000000 - 0077e00000 page 2M
[    0.000000]  0077e00000 - 0077f00000 page 4k
[    0.000000] kernel direct mapping tables up to 77f00000 @ 10000-14000
[    0.000000] last_map_addr: 77f00000 end: 77f00000
[    0.000000] RAMDISK: 3785a000 - 37fef8f4
[    0.000000] ACPI: RSDP 000FE020, 0024 (r2 TOSINV)
[    0.000000] ACPI: XSDT 77EFE120, 005C (r1 TOSINV TOSINV00        3       1000013)
[    0.000000] ACPI: FACP 77EFD000, 00F4 (r4 TOSINV TOSINV00        3 MSFT  1000013)
[    0.000000] ACPI: DSDT 77EF2000, 71F8 (r1 TOSINV TOSINV00 F0000000 MSFT  1000013)
[    0.000000] ACPI: FACS 77E8E000, 0040
[    0.000000] ACPI: HPET 77EFC000, 0038 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: APIC 77EFB000, 0084 (r2 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: MCFG 77EFA000, 003C (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: SLIC 77EF1000, 0176 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: BOOT 77EF0000, 0028 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: SSDT 77EEF000, 0210 (r1 AMD    PowerNow        1 AMD         1)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (6 early reservations) ==> bootmem [0000000000 - 0077f00000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 0000b7cbb0]    TEXT DATA BSS ==> [0000200000 - 0000b7cbb0]
[    0.000000]   #3 [003785a000 - 0037fef8f4]          RAMDISK ==> [003785a000 - 0037fef8f4]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]  [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[10] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000001
[    0.000000]     0: 0x00000006 -> 0x00000008
[    0.000000]     0: 0x00000010 -> 0x00000092
[    0.000000]     0: 0x00000100 -> 0x00077c0d
[    0.000000]     0: 0x00077cb8 -> 0x00077cf0
[    0.000000]     0: 0x00077cf1 -> 0x00077d30
[    0.000000]     0: 0x00077d33 -> 0x00077dbb
[    0.000000]     0: 0x00077dbf -> 0x00077e85
[    0.000000]     0: 0x00077ebf -> 0x00077eef
[    0.000000]     0: 0x00077eff -> 0x00077f00
[    0.000000] On node 0 totalpages: 490888
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 2529 pages reserved
[    0.000000]   DMA zone: 1388 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6661 pages used for memmap
[    0.000000]   DMA32 zone: 480254 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 0000000000008000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000077c0d000 - 0000000077cb8000
[    0.000000] PM: Registered nosave memory: 0000000077cf0000 - 0000000077cf1000
[    0.000000] PM: Registered nosave memory: 0000000077d30000 - 0000000077d33000
[    0.000000] PM: Registered nosave memory: 0000000077dbb000 - 0000000077dbf000
[    0.000000] PM: Registered nosave memory: 0000000077e85000 - 0000000077ebf000
[    0.000000] PM: Registered nosave memory: 0000000077eef000 - 0000000077eff000
[    0.000000] Allocating PCI resources starting at 78000000 (gap: 77f00000:7c100000)
[    0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 481642
[    0.000000] Kernel command line: root=UUID=b7e035d6-0f0e-4943-925b-1a005e61bb12 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1899.855 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.004000] allocated 19660800 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Checking aperture...
[    0.004000] No AGP bridge found
[    0.004000] Node 0: aperture @ 40ce000000 size 32 MB
[    0.004000] Aperture beyond 4GB. Ignoring.
[    0.004000] Memory: 1893984k/1965056k available (4749k kernel code, 1504k absent, 68856k reserved, 2523k data, 536k init)
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3799.71 BogoMIPS (lpj=7599420)
[    0.004034] Security Framework initialized
[    0.004041] SELinux:  Disabled at boot.
[    0.004054] AppArmor: AppArmor initialized
[    0.004063] Mount-cache hash table entries: 256
[    0.004222] Initializing cgroup subsys ns
[    0.004225] Initializing cgroup subsys cpuacct
[    0.004228] Initializing cgroup subsys memory
[    0.004232] Initializing cgroup subsys freezer
[    0.004244] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004246] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004248] tseg: 0077f00000
[    0.004250] CPU: Physical Processor ID: 0
[    0.004251] CPU: Processor Core ID: 0
[    0.004254] using C1E aware idle routine
[    0.005938] ACPI: Core revision 20080926
[    0.008569] ACPI: Checking initramfs for custom DSDT
[    0.316071] Setting APIC routing to flat
[    0.316696] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.359169] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02
[    0.360001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3799.92 BogoMIPS (lpj=7599845)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.444121] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping 02
[    0.444159] Brought up 2 CPUs
[    0.444162] Total of 2 processors activated (7599.63 BogoMIPS).
[    0.444158] System has AMD C1E enabled
[    0.444158] Switch to broadcast mode on CPU1
[    0.444278] CPU0 attaching sched-domain:
[    0.444281]  domain 0: span 0-1 level CPU
[    0.444283]   groups: 0 1
[    0.444289] CPU1 attaching sched-domain:
[    0.444290]  domain 0: span 0-1 level CPU
[    0.444292]   groups: 1 0
[    0.444364] Switch to broadcast mode on CPU0
[    0.444364] net_namespace: 1400 bytes
[    0.444364] Booting paravirtualized kernel on bare hardware
[    0.444364] Time: 20:33:56  Date: 09/19/09
[    0.444364] regulator: core version 0.5
[    0.444364] NET: Registered protocol family 16
[    0.444364] TOM: 0000000080000000 aka 2048M
[    0.444364] ACPI: bus type pci registered
[    0.444364] PCI: MCFG configuration 0: base f4000000 segment 0 buses 0 - 63
[    0.444364] PCI: MCFG area at f4000000 reserved in E820
[    0.449125] PCI: Using MMCONFIG at f4000000 - f7ffffff
[    0.449127] PCI: Using configuration type 1 for base access
[    0.449790] ACPI: EC: Look up EC in DSDT
[    2.460019] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    2.940112] ACPI: Interpreter enabled
[    2.940117] ACPI: (supports S0 S1 S3 S4 S5)
[    2.940149] ACPI: Using IOAPIC for interrupt routing
[    2.951926] ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
[    2.951930] ACPI: EC: driver started in interrupt mode
[    2.952105] ACPI: No dock devices found.
[    2.952115] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    2.952205] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    2.952208] pci 0000:00:04.0: PME# disabled
[    2.952231] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    2.952233] pci 0000:00:05.0: PME# disabled
[    2.952288] pci 0000:00:12.0: reg 10 io port: [0x6038-0x603f]
[    2.952295] pci 0000:00:12.0: reg 14 io port: [0x604c-0x604f]
[    2.952302] pci 0000:00:12.0: reg 18 io port: [0x6030-0x6037]
[    2.952309] pci 0000:00:12.0: reg 1c io port: [0x6048-0x604b]
[    2.952316] pci 0000:00:12.0: reg 20 io port: [0x6010-0x601f]
[    2.952323] pci 0000:00:12.0: reg 24 32bit mmio: [0x8c309000-0x8c3093ff]
[    2.952342] pci 0000:00:12.0: set SATA to AHCI mode
[    2.952371] pci 0000:00:13.0: reg 10 32bit mmio: [0x8c308000-0x8c308fff]
[    2.952426] pci 0000:00:13.1: reg 10 32bit mmio: [0x8c307000-0x8c307fff]
[    2.952481] pci 0000:00:13.2: reg 10 32bit mmio: [0x8c306000-0x8c306fff]
[    2.952535] pci 0000:00:13.3: reg 10 32bit mmio: [0x8c305000-0x8c305fff]
[    2.952589] pci 0000:00:13.4: reg 10 32bit mmio: [0x8c304000-0x8c304fff]
[    2.952666] pci 0000:00:13.5: reg 10 32bit mmio: [0x8c309400-0x8c3094ff]
[    2.952706] pci 0000:00:13.5: supports D1 D2
[    2.952708] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[    2.952712] pci 0000:00:13.5: PME# disabled
[    2.952758] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f]
[    2.952819] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[    2.952826] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[    2.952833] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[    2.952840] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[    2.952847] pci 0000:00:14.1: reg 20 io port: [0x6000-0x600f]
[    2.952900] pci 0000:00:14.2: reg 10 64bit mmio: [0x8c300000-0x8c303fff]
[    2.952935] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    2.952939] pci 0000:00:14.2: PME# disabled
[    2.953117] pci 0000:01:05.0: reg 10 64bit mmio: [0x80000000-0x87ffffff]
[    2.953122] pci 0000:01:05.0: reg 18 64bit mmio: [0x8c200000-0x8c20ffff]
[    2.953126] pci 0000:01:05.0: reg 20 io port: [0x5000-0x50ff]
[    2.953130] pci 0000:01:05.0: reg 24 32bit mmio: [0x8c100000-0x8c1fffff]
[    2.953136] pci 0000:01:05.0: supports D1 D2
[    2.953152] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff]
[    2.953155] pci 0000:00:01.0: bridge 32bit mmio: [0x8c100000-0x8c2fffff]
[    2.953159] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x87ffffff]
[    2.953208] pci 0000:00:04.0: bridge io port: [0x4000-0x4fff]
[    2.953211] pci 0000:00:04.0: bridge 32bit mmio: [0x8b100000-0x8c0fffff]
[    2.953215] pci 0000:00:04.0: bridge 64bit mmio pref: [0x88000000-0x88ffffff]
[    2.953251] pci 0000:03:00.0: reg 10 io port: [0x2000-0x20ff]
[    2.953266] pci 0000:03:00.0: reg 18 64bit mmio: [0x89010000-0x89010fff]
[    2.953278] pci 0000:03:00.0: reg 20 64bit mmio: [0x89000000-0x8900ffff]
[    2.953292] pci 0000:03:00.0: unsupported PM cap regs version (7)
[    2.953391] pci 0000:00:05.0: bridge io port: [0x2000-0x3fff]
[    2.953393] pci 0000:00:05.0: bridge 32bit mmio: [0x8a100000-0x8b0fffff]
[    2.953397] pci 0000:00:05.0: bridge 64bit mmio pref: [0x89000000-0x8a0fffff]
[    2.953456] pci 0000:00:14.4: transparent bridge
[    2.953461] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff]
[    2.953479] bus 00 -> node 0
[    2.953492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    2.953692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[    2.953850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    2.954027] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    2.954238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    2.966107] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.966285] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.966460] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.966635] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.966810] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.966984] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.967160] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.967334] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    2.967469] ACPI: Power Resource [PFA1] (off)
[    2.967610] ACPI: WMI: Mapper loaded
[    2.968119] SCSI subsystem initialized
[    2.968126] libata version 3.00 loaded.
[    2.968126] usbcore: registered new interface driver usbfs
[    2.968126] usbcore: registered new interface driver hub
[    2.972008] usbcore: registered new device driver usb
[    2.972049] PCI: Using ACPI for IRQ routing
[    2.980014] Bluetooth: Core ver 2.13
[    2.984019] NET: Registered protocol family 31
[    2.984021] Bluetooth: HCI device and connection manager initialized
[    2.984024] Bluetooth: HCI socket layer initialized
[    2.984026] NET: Registered protocol family 8
[    2.984028] NET: Registered protocol family 20
[    2.984040] NetLabel: Initializing
[    2.984041] NetLabel:  domain hash size = 128
[    2.984042] NetLabel:  protocols = UNLABELED CIPSOv4
[    2.984059] NetLabel:  unlabeled traffic allowed by default
[    2.984201] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    2.984205] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    2.988088] AppArmor: AppArmor Filesystem Enabled
[    2.996032] Switched to high resolution mode on CPU 0
[    2.996043] Switched to high resolution mode on CPU 1
[    3.000534] pnp: PnP ACPI init
[    3.000548] ACPI: bus type pnp registered
[    3.004649] pnp: PnP ACPI: found 9 devices
[    3.004652] ACPI: ACPI bus type pnp unregistered
[    3.004665] system 00:07: ioport range 0x400-0x4cf has been reserved
[    3.004668] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    3.004671] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[    3.004673] system 00:07: ioport range 0x5a0-0x5bf has been reserved
[    3.004676] system 00:07: ioport range 0x680-0x6ff has been reserved
[    3.004678] system 00:07: ioport range 0x77a-0x77a has been reserved
[    3.004681] system 00:07: ioport range 0xc00-0xc01 has been reserved
[    3.004683] system 00:07: ioport range 0xc14-0xc14 has been reserved
[    3.004686] system 00:07: ioport range 0xc50-0xc52 has been reserved
[    3.004688] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[    3.004691] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[    3.004693] system 00:07: ioport range 0xcd0-0xcdb has been reserved
[    3.004696] system 00:07: ioport range 0x800-0x87f has been reserved
[    3.004698] system 00:07: ioport range 0xb10-0xb1f has been reserved
[    3.004701] system 00:07: ioport range 0xcdc-0xcdf has been reserved
[    3.004705] system 00:07: iomem range 0xff800100-0xff80017f has been reserved
[    3.004711] system 00:08: iomem range 0x0-0x9ffff could not be reserved
[    3.004713] system 00:08: iomem range 0xec000-0xfffff could not be reserved
[    3.004716] system 00:08: iomem range 0x100000-0x7fffffff could not be reserved
[    3.004719] system 00:08: iomem range 0xf4000000-0xf7ffffff has been reserved
[    3.004726] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[    3.004728] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[    3.009451] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    3.009454] pci 0000:00:01.0:   IO window: 0x5000-0x5fff
[    3.009457] pci 0000:00:01.0:   MEM window: 0x8c100000-0x8c2fffff
[    3.009460] pci 0000:00:01.0:   PREFETCH window: 0x00000080000000-0x00000087ffffff
[    3.009464] pci 0000:00:04.0: PCI bridge, secondary bus 0000:09
[    3.009467] pci 0000:00:04.0:   IO window: 0x4000-0x4fff
[    3.009470] pci 0000:00:04.0:   MEM window: 0x8b100000-0x8c0fffff
[    3.009473] pci 0000:00:04.0:   PREFETCH window: 0x00000088000000-0x00000088ffffff
[    3.009476] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
[    3.009479] pci 0000:00:05.0:   IO window: 0x2000-0x3fff
[    3.009482] pci 0000:00:05.0:   MEM window: 0x8a100000-0x8b0fffff
[    3.009485] pci 0000:00:05.0:   PREFETCH window: 0x00000089000000-0x0000008a0fffff
[    3.009489] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80
[    3.009495] pci 0000:00:14.4:   IO window: 0x1000-0x1fff
[    3.009500] pci 0000:00:14.4:   MEM window: disabled
[    3.009504] pci 0000:00:14.4:   PREFETCH window: disabled
[    3.009516] pci 0000:00:01.0: setting latency timer to 64
[    3.009521] pci 0000:00:04.0: setting latency timer to 64
[    3.009525] pci 0000:00:05.0: setting latency timer to 64
[    3.009533] bus: 00 index 0 io port: [0x00-0xffff]
[    3.009535] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    3.009537] bus: 01 index 0 io port: [0x5000-0x5fff]
[    3.009539] bus: 01 index 1 mmio: [0x8c100000-0x8c2fffff]
[    3.009542] bus: 01 index 2 mmio: [0x80000000-0x87ffffff]
[    3.009544] bus: 01 index 3 mmio: [0x0-0x0]
[    3.009545] bus: 09 index 0 io port: [0x4000-0x4fff]
[    3.009547] bus: 09 index 1 mmio: [0x8b100000-0x8c0fffff]
[    3.009549] bus: 09 index 2 mmio: [0x88000000-0x88ffffff]
[    3.009551] bus: 09 index 3 mmio: [0x0-0x0]
[    3.009553] bus: 03 index 0 io port: [0x2000-0x3fff]
[    3.009555] bus: 03 index 1 mmio: [0x8a100000-0x8b0fffff]
[    3.009557] bus: 03 index 2 mmio: [0x89000000-0x8a0fffff]
[    3.009558] bus: 03 index 3 mmio: [0x0-0x0]
[    3.009560] bus: 80 index 0 io port: [0x1000-0x1fff]
[    3.009562] bus: 80 index 1 mmio: [0x0-0x0]
[    3.009564] bus: 80 index 2 mmio: [0x0-0x0]
[    3.009565] bus: 80 index 3 io port: [0x00-0xffff]
[    3.009567] bus: 80 index 4 mmio: [0x000000-0xffffffffffffffff]
[    3.009582] NET: Registered protocol family 2
[    3.044589] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    3.045104] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    3.047225] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    3.047768] TCP: Hash tables configured (established 262144 bind 65536)
[    3.047771] TCP reno registered
[    3.056643] NET: Registered protocol family 1
[    3.056781] checking if image is initramfs... it is
[    3.678873] Freeing initrd memory: 7766k freed
[    3.683530] Simple Boot Flag at 0x44 set to 0x1
[    3.683897] audit: initializing netlink socket (disabled)
[    3.683911] type=2000 audit(1253392438.680:1): initialized
[    3.692416] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.693806] VFS: Disk quotas dquot_6.5.1
[    3.693882] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.694530] fuse init (API version 7.10)
[    3.694614] msgmni has been set to 3715
[    3.694844] alg: No test for stdrng (krng)
[    3.694860] io scheduler noop registered
[    3.694862] io scheduler anticipatory registered
[    3.694864] io scheduler deadline registered
[    3.694908] io scheduler cfq registered (default)
[   11.692031] pci 0000:00:13.5: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[   11.692056] pci 0000:01:05.0: Boot video device
[   11.696023] pcieport-driver 0000:00:04.0: setting latency timer to 64
[   11.696045] pcieport-driver 0000:00:04.0: found MSI capability
[   11.696064] pcieport-driver 0000:00:04.0: irq 2303 for MSI/MSI-X
[   11.696071] pci_express 0000:00:04.0:pcie00: allocate port service
[   11.696090] pci_express 0000:00:04.0:pcie03: allocate port service
[   11.696132] pcieport-driver 0000:00:05.0: setting latency timer to 64
[   11.696151] pcieport-driver 0000:00:05.0: found MSI capability
[   11.696166] pcieport-driver 0000:00:05.0: irq 2302 for MSI/MSI-X
[   11.696173] pci_express 0000:00:05.0:pcie00: allocate port service
[   11.696185] pci_express 0000:00:05.0:pcie03: allocate port service
[   11.696233] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.696243] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[   11.696411] ACPI: AC Adapter [ADP0] (on-line)
[   11.701015] ACPI: Battery Slot [BAT0] (battery present)
[   11.701115] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   11.701118] ACPI: Power Button (FF) [PWRF]
[   11.701164] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[   11.701166] ACPI: Power Button (CM) [PWRB]
[   11.701211] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[   11.704789] ACPI: Lid Switch [LID]
[   11.704990] fan PNP0C0B:00: registered as cooling_device0
[   11.704996] ACPI: Fan [FAN1] (off)
[   11.705243] ACPI: processor limited to max C-state 1
[   11.705300] processor ACPI_CPU:00: registered as cooling_device1
[   11.705305] ACPI: Processor [CPU0] (supports 8 throttling states)
[   11.705359] processor ACPI_CPU:01: registered as cooling_device2
[   11.719539] thermal LNXTHERM:01: registered as thermal_zone0
[   11.739402] ACPI: Thermal Zone [THZN] (58 C)
[   11.764185] Linux agpgart interface v0.103
[   11.764198] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[   11.765167] brd: module loaded
[   11.765494] loop: module loaded
[   11.765597] Fixed MDIO Bus: probed
[   11.765603] PPP generic driver version 2.4.2
[   11.765673] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[   11.765710] Driver 'sd' needs updating - please use bus_type methods
[   11.765719] Driver 'sr' needs updating - please use bus_type methods
[   11.765758] ahci 0000:00:12.0: version 3.0
[   11.765786] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.765834] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[   11.765930] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[   11.765934] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
[   11.766458] scsi0 : ahci
[   11.766621] scsi1 : ahci
[   11.766696] scsi2 : ahci
[   11.766770] scsi3 : ahci
[   11.766872] ata1: SATA max UDMA/133 abar m1024@0x8c309000 port 0x8c309100 irq 22
[   11.766876] ata2: SATA max UDMA/133 abar m1024@0x8c309000 port 0x8c309180 irq 22
[   11.766879] ata3: SATA max UDMA/133 abar m1024@0x8c309000 port 0x8c309200 irq 22
[   11.766883] ata4: SATA max UDMA/133 abar m1024@0x8c309000 port 0x8c309280 irq 22
[   12.248034] ata1: softreset failed (device not ready)
[   12.248075] ata1: failed due to HW bug, retry pmp=0
[   12.412043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   12.412522] ata1.00: ATA-8: FUJITSU MHY2250BH, 0040020B, max UDMA/100
[   12.412525] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   12.412543] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[   12.413137] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[   12.413140] ata1.00: configured for UDMA/100
[   12.748049] ata2: SATA link down (SStatus 0 SControl 300)
[   13.084047] ata3: SATA link down (SStatus 0 SControl 300)
[   13.420046] ata4: SATA link down (SStatus 0 SControl 300)
[   13.436079] isa bounce pool size: 16 pages
[   13.436171] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHY2250B 0040 PQ: 0 ANSI: 5
[   13.436279] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[   13.436296] sd 0:0:0:0: [sda] Write Protect is off
[   13.436298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.436323] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.436391] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[   13.436404] sd 0:0:0:0: [sda] Write Protect is off
[   13.436406] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.436429] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.436433]  sda: sda1 sda2 < sda5 > sda3 sda4
[   13.549542] sd 0:0:0:0: [sda] Attached SCSI disk
[   13.549613] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   13.549901] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.549941] pata_atiixp 0000:00:14.1: setting latency timer to 64
[   13.550084] scsi4 : pata_atiixp
[   13.550178] scsi5 : pata_atiixp
[   13.551465] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq 14
[   13.551468] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15
[   13.712517] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T40N, JW02, max UDMA/33
[   13.728455] ata5.00: configured for UDMA/33
[   13.887692] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T40N  JW02 PQ: 0 ANSI: 5
[   13.898884] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   13.898887] Uniform CD-ROM driver Revision: 3.20
[   13.899006] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   13.899056] sr 4:0:0:0: Attached scsi generic sg1 type 5
[   13.899478] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.899621] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0
[   13.899641] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[   13.899664] ehci_hcd 0000:00:13.5: setting latency timer to 64
[   13.899668] ehci_hcd 0000:00:13.5: EHCI Host Controller
[   13.899739] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[   13.899776] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[   13.899795] ehci_hcd 0000:00:13.5: debug port 1
[   13.899824] ehci_hcd 0000:00:13.5: irq 19, io mem 0x8c309400
[   13.908049] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[   13.908133] usb usb1: configuration #1 chosen from 1 choice
[   13.908163] hub 1-0:1.0: USB hub found
[   13.908172] hub 1-0:1.0: 10 ports detected
[   13.908314] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   13.908340] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.908357] ohci_hcd 0000:00:13.0: setting latency timer to 64
[   13.908361] ohci_hcd 0000:00:13.0: OHCI Host Controller
[   13.908418] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[   13.908456] ohci_hcd 0000:00:13.0: irq 16, io mem 0x8c308000
[   13.968071] usb usb2: configuration #1 chosen from 1 choice
[   13.968096] hub 2-0:1.0: USB hub found
[   13.968108] hub 2-0:1.0: 2 ports detected
[   13.968209] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   13.968221] ohci_hcd 0000:00:13.1: setting latency timer to 64
[   13.968225] ohci_hcd 0000:00:13.1: OHCI Host Controller
[   13.968266] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[   13.968298] ohci_hcd 0000:00:13.1: irq 17, io mem 0x8c307000
[   14.024059] usb usb3: configuration #1 chosen from 1 choice
[   14.024083] hub 3-0:1.0: USB hub found
[   14.024096] hub 3-0:1.0: 2 ports detected
[   14.024203] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   14.024219] ohci_hcd 0000:00:13.2: setting latency timer to 64
[   14.024222] ohci_hcd 0000:00:13.2: OHCI Host Controller
[   14.024268] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[   14.024302] ohci_hcd 0000:00:13.2: irq 18, io mem 0x8c306000
[   14.080059] usb usb4: configuration #1 chosen from 1 choice
[   14.080086] hub 4-0:1.0: USB hub found
[   14.080099] hub 4-0:1.0: 2 ports detected
[   14.080193] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.080206] ohci_hcd 0000:00:13.3: setting latency timer to 64
[   14.080210] ohci_hcd 0000:00:13.3: OHCI Host Controller
[   14.080257] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[   14.080276] ohci_hcd 0000:00:13.3: irq 17, io mem 0x8c305000
[   14.136063] usb usb5: configuration #1 chosen from 1 choice
[   14.136087] hub 5-0:1.0: USB hub found
[   14.136099] hub 5-0:1.0: 2 ports detected
[   14.136187] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   14.136200] ohci_hcd 0000:00:13.4: setting latency timer to 64
[   14.136203] ohci_hcd 0000:00:13.4: OHCI Host Controller
[   14.136245] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[   14.136264] ohci_hcd 0000:00:13.4: irq 18, io mem 0x8c304000
[   14.192054] usb usb6: configuration #1 chosen from 1 choice
[   14.192077] hub 6-0:1.0: USB hub found
[   14.192087] hub 6-0:1.0: 2 ports detected
[   14.192185] uhci_hcd: USB Universal Host Controller Interface driver
[   14.192280] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   14.220810] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.220817] serio: i8042 AUX port at 0x60,0x64 irq 12
[   14.232575] mice: PS/2 mouse device common for all mice
[   14.280033] usb 1-6: new high speed USB device using ehci_hcd and address 3
[   14.280582] rtc_cmos 00:03: RTC can wake from S4
[   14.280621] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   14.280676] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[   14.280748] device-mapper: uevent: version 1.0.3
[   14.280852] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   14.281048] device-mapper: multipath: version 1.0.5 loaded
[   14.281051] device-mapper: multipath round-robin: version 1.0.0 loaded
[   14.281274] cpuidle: using governor ladder
[   14.281276] cpuidle: using governor menu
[   14.281713] TCP cubic registered
[   14.281789] NET: Registered protocol family 10
[   14.282197] lo: Disabled Privacy Extensions
[   14.282475] NET: Registered protocol family 17
[   14.282503] Bluetooth: L2CAP ver 2.11
[   14.282505] Bluetooth: L2CAP socket layer initialized
[   14.282508] Bluetooth: SCO (Voice Link) ver 0.6
[   14.282509] Bluetooth: SCO socket layer initialized
[   14.282574] Bluetooth: RFCOMM socket layer initialized
[   14.282582] Bluetooth: RFCOMM TTY layer initialized
[   14.282583] Bluetooth: RFCOMM ver 1.10
[   14.282648] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 processors (2 cpu cores) (version 2.20.00)
[   14.282720] powernow-k8:    0 : fid 0xb (1900 MHz), vid 0x13
[   14.282722] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x14
[   14.282724] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x15
[   14.282726] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1a
[   14.282889] registered taskstats version 1
[   14.283041]   Magic number: 9:597:599
[   14.283066] serial8250 serial8250: hash matches
[   14.283136] rtc_cmos 00:03: setting system clock to 2009-09-19 20:34:10 UTC (1253392450)
[   14.283139] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   14.283141] EDD information not available.
[   14.283216] Freeing unused kernel memory: 536k freed
[   14.283511] Write protecting the kernel read-only data: 6688k
[   14.310625] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[   14.426860] usb 1-6: configuration #1 chosen from 1 choice
[   14.548808] usb 1-8: new high speed USB device using ehci_hcd and address 4
[   14.560093] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   14.560114] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   14.560137] r8169 0000:03:00.0: setting latency timer to 64
[   14.560233] r8169 0000:03:00.0: irq 2301 for MSI/MSI-X
[   14.560898] eth0: RTL8102e at 0xffffc20000072000, 00:1e:33:3d:70:9e, XID 34a00000 IRQ 2301
[   14.720935] usb 1-8: configuration #1 chosen from 1 choice
[   14.988554] usb 2-1: new low speed USB device using ohci_hcd and address 2

[cuco11]

druha cast:

Kód: [Vybrat]

[   15.132256] PM: Starting manual resume from disk
[   15.132261] PM: Resume from partition 8:4
[   15.132263] PM: Checking hibernation image.
[   15.132494] PM: Resume from disk failed.
[   15.157095] EXT4-fs: barriers enabled
[   15.164162] usb 2-1: configuration #1 chosen from 1 choice
[   15.171779] usbcore: registered new interface driver hiddev
[   15.176517] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input5
[   15.176598] kjournald2 starting.  Commit interval 5 seconds
[   15.176617] EXT4-fs: delayed allocation enabled
[   15.176621] EXT4-fs: file extents enabled
[   15.176734] EXT4-fs: mballoc enabled
[   15.176739] EXT4-fs: mounted filesystem with ordered data mode.
[   15.204103] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0
[   15.204127] usbcore: registered new interface driver usbhid
[   15.204130] usbhid: v2.6:USB HID core driver
[   22.556934] udev: starting version 141
[   23.040548] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   23.192624] cfg80211: Calling CRDA to update world regulatory domain
[   23.197887] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.251824] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   23.278687] Linux video capture interface: v2.00
[   23.295174] acpi device:04: registered as cooling_device3
[   23.295444] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input7
[   23.328606] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   23.531493] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   23.544630] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
[   23.546104] input: CNF7051 as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input8
[   23.556689] usbcore: registered new interface driver uvcvideo
[   23.556712] USB Video Class driver (v0.1.0)
[   23.600572] cfg80211: World regulatory domain updated:
[   23.600577] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.600580] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.600582] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.600584] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   23.600587] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   23.600589] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   24.227120] rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could damage your
[   24.227124]          hardware, use at your own risk
[   24.228062] phy0: Selected rate control algorithm 'pid'
[   24.282280] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   24.314764] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[   24.325725] phy0: hwaddr 00:1b:9e:eb:7e:9a, RTL8187BvE V0 + rtl8225z2
[   24.325772] usbcore: registered new interface driver rtl8187
[   24.549489] lp: driver loaded but no devices found
[   24.553761] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
[   24.632769] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[   24.709963] Adding 570296k swap on /dev/sda4.  Priority:-1 extents:1 across:570296k
[   25.268011] EXT4 FS on sda3, internal journal on sda3:8
[   27.219081] type=1505 audit(1253385263.432:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2110
[   27.274743] type=1505 audit(1253385263.488:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2114
[   27.274898] type=1505 audit(1253385263.488:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2114
[   27.274947] type=1505 audit(1253385263.488:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2114
[   27.274995] type=1505 audit(1253385263.488:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2114
[   27.449981] type=1505 audit(1253385263.664:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2125
[   27.450186] type=1505 audit(1253385263.664:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2125
[   27.500998] type=1505 audit(1253385263.717:9): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2129
[   27.535071] type=1505 audit(1253385263.749:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2133
[   30.500038] Clocksource tsc unstable (delta = -176131722 ns)
[   37.255939] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   37.572351] [drm] Initialized drm 1.1.0 20060810
[   37.601898] ppdev: user-space parallel port driver
[   37.633024] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   38.776294] [drm] Setting GART location based on new memory map
[   38.776763] [drm] Loading RS690/RS740 Microcode
[   38.776783] [drm] Num pipes: 1
[   38.776790] [drm] writeback test succeeded in 1 usecs
[   41.784957] r8169: eth0: link up
[   41.784975] r8169: eth0: link up
[   52.208533] eth0: no IPv6 routers present
[   58.010950] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   62.103806] wlan0: direct probe to AP 00:02:72:74:6d:aa try 1
[   62.300691] wlan0: direct probe to AP 00:02:72:74:6d:aa try 2
[   62.500578] wlan0: direct probe to AP 00:02:72:74:6d:aa try 3
[   62.700578] wlan0: direct probe to AP 00:02:72:74:6d:aa timed out
[   78.256833] CPU0 attaching NULL sched-domain.
[   78.256848] CPU1 attaching NULL sched-domain.
[   78.268677] CPU0 attaching sched-domain:
[   78.268688]  domain 0: span 0-1 level CPU
[   78.268694]   groups: 0 1
[   78.268709] CPU1 attaching sched-domain:
[   78.268713]  domain 0: span 0-1 level CPU
[   78.268718]   groups: 1 0
[   96.969092] process `skype.real' is using obsolete setsockopt SO_BSDCOMPAT


Chcem sa este opytat pri bootovani mi vyhadzuje 2 chybove hlasky:

Kód: [Vybrat]

2.956799] pci 0000:03:00.0: unsupported PM cap regs version (7)
12.248034] ata1: softreset failed (device not ready)
co s tym?

[cuco11]

Tak som si nakoniec problem vyriesil sam, naistaloval som si Omnibook module podla nasledovneho navodu:

Kód: [Vybrat]

http://www.alexxoid.com/blog/linux/how-to-enable-bluetooth-on-toshiba-satellite-a300-laptop.html
Mozem povedat ze po aplikovani uvedeneho navodu mi ventilator na CPU spina rychlost podla potreby a udrzuje teplotu procesora do 55°C. Taktiez mi funguju klavesy FN+F6,F7 na zmenu jasu obrazovky. Hybernaciu alebo len usporny rezim sa mi vsak rozbehat nepodarilo. Dufam ze to niekomu pomoze.

Odporucam este tuto diskusiu:

Kód: [Vybrat]

http://www.linuxquestions.org/questions/linux-laptop-and-netbook-25/fan-acpi-problems-insyde-h20-bios-toshiba-satellite-pro-l300-x-716924/