Ahoj, po několikadenním běhu počítače mi vypadne zvukové zařízení, nelze volat přez skype, přehravaní videa mlčí, televize taky ticho, a hudba nejspíš taky.Vždy pak musím restartnout počítač, pak je vše ok.Mám ubuntu 8.10,gnome,we widlích s tím problém nebyl.
přikládám dmesg po výpadku zvuku:
[ 0.004530] Initializing cgroup subsys memory
[ 0.004566] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004573] CPU: L2 cache: 128K
[ 0.004577] CPU: Hyper-Threading is disabled
[ 0.004604] Checking 'hlt' instruction... OK.
[ 0.020703] SMP alternatives: switching to UP code
[ 0.031886] ACPI: Core revision 20080609
[ 0.034596] ACPI: Checking initramfs for custom DSDT
[ 0.538570] ENABLING IO-APIC IRQs
[ 0.538773] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.578478] CPU0: Intel(R) Celeron(R) CPU 2.00GHz stepping 07
[ 0.580031] Brought up 1 CPUs
[ 0.580031] Total of 1 processors activated (3994.74 BogoMIPS).
[ 0.580031] CPU0 attaching NULL sched-domain.
[ 0.580031] net_namespace: 840 bytes
[ 0.580031] Booting paravirtualized kernel on bare hardware
[ 0.580031] Time: 13:01:21 Date: 10/08/09
[ 0.580031] NET: Registered protocol family 16
[ 0.580031] EISA bus registered
[ 0.580031] ACPI: bus type pci registered
[ 0.580031] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.580031] PCI: Using configuration type 1 for base access
[ 0.584605] ACPI: EC: Look up EC in DSDT
[ 0.597286] ACPI: Interpreter enabled
[ 0.597299] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.597336] ACPI: Using IOAPIC for interrupt routing
[ 0.617587] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.617859] PCI: 0000:00:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
[ 0.618056] PCI: 0000:00:1d.0 reg 20 io port: [e000, e01f]
[ 0.618124] PCI: 0000:00:1d.1 reg 20 io port: [e400, e41f]
[ 0.618192] PCI: 0000:00:1d.2 reg 20 io port: [e800, e81f]
[ 0.618260] PCI: 0000:00:1d.3 reg 20 io port: [ec00, ec1f]
[ 0.618335] PCI: 0000:00:1d.7 reg 10 32bit mmio: [f7fffc00, f7ffffff]
[ 0.618419] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.618426] pci 0000:00:1d.7: PME# disabled
[ 0.618528] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.618538] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.618544] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.618582] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 0.618592] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 0.618601] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 0.618610] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 0.618619] PCI: 0000:00:1f.1 reg 20 io port: [fc00, fc0f]
[ 0.618628] PCI: 0000:00:1f.1 reg 24 32bit mmio: [0, 3ff]
[ 0.618668] PCI: 0000:00:1f.2 reg 10 io port: [d400, d407]
[ 0.618677] PCI: 0000:00:1f.2 reg 14 io port: [d000, d003]
[ 0.618686] PCI: 0000:00:1f.2 reg 18 io port: [cc00, cc07]
[ 0.618694] PCI: 0000:00:1f.2 reg 1c io port: [c800, c803]
[ 0.618703] PCI: 0000:00:1f.2 reg 20 io port: [c400, c40f]
[ 0.618769] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
[ 0.618826] PCI: 0000:00:1f.5 reg 10 io port: [d800, d8ff]
[ 0.618835] PCI: 0000:00:1f.5 reg 14 io port: [dc00, dc3f]
[ 0.618844] PCI: 0000:00:1f.5 reg 18 32bit mmio: [f7fff800, f7fff9ff]
[ 0.618854] PCI: 0000:00:1f.5 reg 1c 32bit mmio: [f7fff400, f7fff4ff]
[ 0.618899] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.618905] pci 0000:00:1f.5: PME# disabled
[ 0.618974] PCI: 0000:01:00.0 reg 10 32bit mmio: [e0000000, efffffff]
[ 0.618983] PCI: 0000:01:00.0 reg 14 io port: [a800, a8ff]
[ 0.618993] PCI: 0000:01:00.0 reg 18 32bit mmio: [f1df0000, f1dfffff]
[ 0.619019] PCI: 0000:01:00.0 reg 30 32bit mmio: [f1dc0000, f1ddffff]
[ 0.619070] pci 0000:01:00.0: supports D1
[ 0.619073] pci 0000:01:00.0: supports D2
[ 0.619118] PCI: bridge 0000:00:01.0 io port: [a000, afff]
[ 0.619124] PCI: bridge 0000:00:01.0 32bit mmio: [f1d00000, f1dfffff]
[ 0.619131] PCI: bridge 0000:00:01.0 32bit mmio pref: [d1c00000, f1bfffff]
[ 0.619163] PCI: 0000:02:01.0 reg 10 io port: [bc00, bc1f]
[ 0.619246] PCI: 0000:02:02.0 reg 10 32bit mmio: [f4000000, f4ffffff]
[ 0.619344] PCI: 0000:02:02.1 reg 10 32bit mmio: [f5000000, f5ffffff]
[ 0.619434] PCI: 0000:02:02.2 reg 10 32bit mmio: [f6000000, f6ffffff]
[ 0.619535] PCI: 0000:02:05.0 reg 10 io port: [b800, b8ff]
[ 0.619544] PCI: 0000:02:05.0 reg 14 32bit mmio: [f7effc00, f7effcff]
[ 0.619601] pci 0000:02:05.0: supports D1
[ 0.619604] pci 0000:02:05.0: supports D2
[ 0.619607] pci 0000:02:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.619614] pci 0000:02:05.0: PME# disabled
[ 0.619654] pci 0000:00:1e.0: transparent bridge
[ 0.619660] PCI: bridge 0000:00:1e.0 io port: [b000, bfff]
[ 0.619666] PCI: bridge 0000:00:1e.0 32bit mmio: [f1e00000, f7efffff]
[ 0.619687] bus 00 -> node 0
[ 0.619710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.620109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.627507] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.627774] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.628072] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.628343] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.628604] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.628886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.629153] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.629419] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.629999] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - AD, should be A0 [20080609]
[ 0.630016] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.630188] pnp: PnP ACPI init
[ 0.630214] ACPI: bus type pnp registered
[ 0.643579] pnp: PnP ACPI: found 14 devices
[ 0.643588] ACPI: ACPI bus type pnp unregistered
[ 0.643595] PnPBIOS: Disabled by ACPI PNP
[ 0.645409] PCI: Using ACPI for IRQ routing
[ 0.645744] NET: Registered protocol family 8
[ 0.645744] NET: Registered protocol family 20
[ 0.645744] NetLabel: Initializing
[ 0.645744] NetLabel: domain hash size = 128
[ 0.645744] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.645744] NetLabel: unlabeled traffic allowed by default
[ 0.645744] hpet clockevent registered
[ 0.645744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.645744] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.648861] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.648869] actual entries 65620
[ 0.649177] AppArmor: AppArmor Filesystem Enabled
[ 0.649213] ACPI: RTC can wake from S4
[ 0.649368] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.649375] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.649380] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 0.649387] system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.649393] system 00:07: iomem range 0xff380000-0xffefffff could not be reserved
[ 0.649407] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.649413] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.649431] system 00:0c: ioport range 0x680-0x6ff has been reserved
[ 0.649436] system 00:0c: ioport range 0x295-0x296 has been reserved
[ 0.649451] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.649457] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[ 0.649462] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.649466] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.649471] system 00:0d: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.686300] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.686308] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.686317] pci 0000:00:01.0: MEM window: 0xf1d00000-0xf1dfffff
[ 0.686324] pci 0000:00:01.0: PREFETCH window: 0x000000d1c00000-0x000000f1bfffff
[ 0.686335] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.686340] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.686348] pci 0000:00:1e.0: MEM window: 0xf1e00000-0xf7efffff
[ 0.686354] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.686381] pci 0000:00:1e.0: setting latency timer to 64
[ 0.686388] bus: 00 index 0 io port: [0, ffff]
[ 0.686391] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.686395] bus: 01 index 0 io port: [a000, afff]
[ 0.686398] bus: 01 index 1 mmio: [f1d00000, f1dfffff]
[ 0.686401] bus: 01 index 2 mmio: [d1c00000, f1bfffff]
[ 0.686404] bus: 01 index 3 mmio: [0, 0]
[ 0.686408] bus: 02 index 0 io port: [b000, bfff]
[ 0.686411] bus: 02 index 1 mmio: [f1e00000, f7efffff]
[ 0.686414] bus: 02 index 2 mmio: [0, 0]
[ 0.686417] bus: 02 index 3 io port: [0, ffff]
[ 0.686420] bus: 02 index 4 mmio: [0, ffffffff]
[ 0.686446] NET: Registered protocol family 2
[ 0.686752] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.687316] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.688581] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.689225] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.689232] TCP reno registered
[ 0.689496] NET: Registered protocol family 1
[ 0.689730] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 1.178647] it is
[ 1.772234] Freeing initrd memory: 8322k freed
[ 1.774476] audit: initializing netlink socket (disabled)
[ 1.774503] type=2000 audit(1255006881.772:1): initialized
[ 1.781535] highmem bounce pool size: 64 pages
[ 1.781560] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.789806] VFS: Disk quotas dquot_6.5.1
[ 1.790084] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.790434] msgmni has been set to 1743
[ 1.790824] io scheduler noop registered
[ 1.790831] io scheduler anticipatory registered
[ 1.790835] io scheduler deadline registered
[ 1.790881] io scheduler cfq registered (default)
[ 1.791009] pci 0000:01:00.0: Boot video device
[ 1.792377] isapnp: Scanning for PnP cards...
[ 2.146313] isapnp: No Plug & Play device found
[ 2.373898] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.374185] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.377451] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.385066] brd: module loaded
[ 2.385311] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.385735] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.388876] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.388890] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.390453] mice: PS/2 mouse device common for all mice
[ 2.391108] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.391148] rtc0: alarms up to one month, hpet irqs
[ 2.391669] EISA: Probing bus 0 at eisa.0
[ 2.391718] EISA: Detected 0 cards.
[ 2.391724] cpuidle: using governor ladder
[ 2.391728] cpuidle: using governor menu
[ 2.392798] TCP cubic registered
[ 2.392888] Using IPI No-Shortcut mode
[ 2.394015] registered taskstats version 1
[ 2.394327] Magic number: 13:962:27
[ 2.394354] tty ttyda: hash matches
[ 2.394548] rtc_cmos 00:02: setting system clock to 2009-10-08 13:01:23 UTC (1255006883)
[ 2.394555] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.394558] EDD information not available.
[ 2.395118] Freeing unused kernel memory: 428k freed
[ 2.395206] Write protecting the kernel text: 2588k
[ 2.395257] Write protecting the kernel read-only data: 940k
[ 2.424332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.542269] compcache: Compressed swap size set to: 518000 KB
[ 2.544325] TLSF: pool: f881e000, init_size=16384, max_size=0, grow_size=16384
[ 2.572690] vesafb: framebuffer at 0xe0000000, mapped to 0xf8980000, using 5120k, total 16384k
[ 2.572700] vesafb: mode is 1280x1024x16, linelength=2560, pages=5
[ 2.572704] vesafb: protected mode interface info at c000:9f88
[ 2.572708] vesafb: pmi: set display start = c00ca02a, set palette = c00ca0e8
[ 2.572712] vesafb: scrolling: redraw
[ 2.572716] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 2.573360] Console: switching to colour frame buffer device 160x64
[ 2.633802] fb0: VESA VGA frame buffer device
[ 2.964644] fuse init (API version 7.9)
[ 3.108058] processor ACPI0007:00: registered as cooling_device0
[ 3.108071] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.918855] Floppy drive(s): fd0 is 1.44M
[ 3.935906] FDC 0 is a post-1991 82077
[ 4.320176] usbcore: registered new interface driver usbfs
[ 4.320232] usbcore: registered new interface driver hub
[ 4.320360] usbcore: registered new device driver usb
[ 4.368941] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.368968] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.368975] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.369115] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 4.373061] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.373072] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 4.373099] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fffc00
[ 4.384232] USB Universal Host Controller Interface driver v3.0
[ 4.412058] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.412386] usb usb1: configuration #1 chosen from 1 choice
[ 4.412472] hub 1-0:1.0: USB hub found
[ 4.412499] hub 1-0:1.0: 8 ports detected
[ 4.412822] No dock devices found.
[ 4.516727] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.516747] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.516754] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.516850] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.516904] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
[ 4.517266] usb usb2: configuration #1 chosen from 1 choice
[ 4.517342] hub 2-0:1.0: USB hub found
[ 4.517371] hub 2-0:1.0: 2 ports detected
[ 4.579394] SCSI subsystem initialized
[ 4.582405] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
[ 4.591290] 8139too Fast Ethernet driver 0.9.28
[ 4.625192] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.625211] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.625217] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.625298] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 4.625349] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 4.625764] usb usb3: configuration #1 chosen from 1 choice
[ 4.625843] hub 3-0:1.0: USB hub found
[ 4.625870] hub 3-0:1.0: 2 ports detected
[ 4.700144] libata version 3.00 loaded.
[ 4.728750] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.728771] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.728777] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.728857] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 4.728909] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 4.729291] usb usb4: configuration #1 chosen from 1 choice
[ 4.729380] hub 4-0:1.0: USB hub found
[ 4.729405] hub 4-0:1.0: 2 ports detected
[ 4.823340] Adding 517996k swap on /dev/ramzswap0. Priority:100 extents:1 across:517996k
[ 4.832786] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.832805] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.832812] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.832889] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 4.832930] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 4.833303] usb usb5: configuration #1 chosen from 1 choice
[ 4.833380] hub 5-0:1.0: USB hub found
[ 4.833408] hub 5-0:1.0: 2 ports detected
[ 4.937724] ne2k-pci 0000:02:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.938278] eth0: RealTek RTL-8029 found at 0xbc00, IRQ 22, 00:40:33:a0:e7:80.
[ 4.939034] 8139too 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.940097] eth1: RealTek RTL8139 at 0xb800, 00:19:66:73:74:51, IRQ 22
[ 4.940103] eth1: Identified 8139 chip type 'RTL-8101'
[ 4.948733] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.959063] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.959123] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 4.959150] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 4.959198] pata_acpi 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.959238] pata_acpi 0000:00:1f.2: setting latency timer to 64
[ 4.959258] pata_acpi 0000:00:1f.2: PCI INT A disabled
[ 4.971422] ata_piix 0000:00:1f.1: version 2.12
[ 4.971448] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.971523] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.975453] scsi0 : ata_piix
[ 4.975707] scsi1 : ata_piix
[ 4.979119] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 4.979126] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 5.140597] ata1.01: ATA-6: WDC WD2000JB-00KFA0, 08.05J08, max UDMA/100
[ 5.140604] ata1.01: 390721968 sectors, multi 16: LBA48
[ 5.148522] ata1.01: configured for UDMA/100
[ 5.488412] ata2.00: ATAPI: TEAC DV-W516GA, C4S2, max UDMA/33
[ 5.488455] ata2.01: ATAPI: LITE-ON LTR-52327S, QS09, max UDMA/33
[ 5.504331] ata2.00: configured for UDMA/33
[ 5.520337] ata2.01: configured for UDMA/33
[ 5.520577] scsi 0:0:1:0: Direct-Access ATA WDC WD2000JB-00K 08.0 PQ: 0 ANSI: 5
[ 5.521728] scsi 1:0:0:0: CD-ROM TEAC DV-W516GA C4S2 PQ: 0 ANSI: 5
[ 5.522989] scsi 1:0:1:0: CD-ROM LITE-ON LTR-52327S QS09 PQ: 0 ANSI: 5
[ 5.523185] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.523197] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 5.523270] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5.525254] scsi2 : ata_piix
[ 5.525469] scsi3 : ata_piix
[ 5.525597] ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd000 bmdma 0xc400 irq 18
[ 5.525603] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xc408 irq 18
[ 5.852767] ata4.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 5.852774] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.868780] ata4.00: configured for UDMA/133
[ 5.869032] scsi 3:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 6.432602] scsi 0:0:1:0: Attached scsi generic sg0 type 0
[ 6.432823] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.433041] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 6.433250] scsi 3:0:0:0: Attached scsi generic sg3 type 0
[ 6.529279] Driver 'sr' needs updating - please use bus_type methods
[ 6.529809] Driver 'sd' needs updating - please use bus_type methods
[ 6.530089] sd 0:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 6.530156] sd 0:0:1:0: [sda] Write Protect is off
[ 6.530163] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 6.530275] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.530500] sd 0:0:1:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 6.530568] sd 0:0:1:0: [sda] Write Protect is off
[ 6.530574] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 6.530685] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.530696] sda:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 6.534937] Uniform CD-ROM driver Revision: 3.20
[ 6.535141] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.539010] sr1: scsi3-mmc drive: 23x/52x writer cd/rw xa/form2 cdda tray
[ 6.539205] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 6.547336] sda1 sda2 sda3 < sda5 >
[ 6.562357] sd 0:0:1:0: [sda] Attached SCSI disk
[ 6.562589] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 6.562658] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.562664] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.562777] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.563017] sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 6.563085] sd 3:0:0:0: [sdb] Write Protect is off
[ 6.563091] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 6.563203] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.563216] sdb: sdb1 sdb2 < sdb5 >
[ 6.593428] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 7.131509] PM: Starting manual resume from disk
[ 7.131518] PM: Resume from partition 8:5
[ 7.131520] PM: Checking hibernation image.
[ 7.131822] PM: Resume from disk failed.
[ 7.189440] kjournald starting. Commit interval 5 seconds
[ 7.189474] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.999309] udevd version 124 started
[ 14.185891] Linux agpgart interface v0.103
[ 14.252342] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 14.322129] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.392405] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 14.397177] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 14.692093] intel_rng: FWH not detected
[ 14.864310] iTCO_vendor_support: vendor-support=0
[ 14.924317] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 14.924623] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 14.924967] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.208513] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 15.224075] ACPI: Power Button (FF) [PWRF]
[ 15.224357] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 15.236056] ACPI: Power Button (CM) [PWRB]
[ 15.728624] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 16.369457] [fglrx] Maximum main memory to use for locked dma buffers: 1896 MBytes.
[ 16.369767] [fglrx] vendor: 1002 device: 9587 count: 1
[ 16.376173] [fglrx] ioport: bar 1, base 0xa800, size: 0x100
[ 16.376203] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.376677] [fglrx] PAT is enabled successfully!
[ 16.376732] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 16.896318] Linux video capture interface: v2.00
[ 17.067113] parport_pc 00:06: reported by Plug and Play ACPI
[ 17.067226] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 17.296337] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 17.298433] cx8800 0000:02:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 17.299296] cx88[0]: subsystem: 107d:6f2b, board: WinFast DTV2000 H ver. J (new) [card=68,autodetected]
[ 17.299303] cx88[0]: TV tuner type 63, Radio tuner type -1
[ 17.330744] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 17.986044] tuner' 0-0043: chip found @ 0x86 (cx88[0])
[ 18.272722] tda9887 0-0043: creating new instance
[ 18.272728] tda9887 0-0043: tda988[5/6/7] found
[ 18.276100] tuner' 0-0061: chip found @ 0xc2 (cx88[0])
[ 18.277091] tuner' 0-0063: chip found @ 0xc6 (cx88[0])
[ 19.066544] tuner-simple 0-0061: creating new instance
[ 19.066552] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 19.070766] input: cx88 IR (WinFast DTV2000 H ver. as /devices/pci0000:00/0000:00:1e.0/0000:02:02.0/input/input4
[ 19.084107] cx88[0]/0: found at 0000:02:02.0, rev: 5, irq: 23, latency: 32, mmio: 0xf4000000
[ 19.084404] cx88[0]/0: registered device video0 [v4l2]
[ 19.084616] cx88[0]/0: registered device vbi0
[ 19.097543] cx88[0]/2: cx2388x 8802 Driver Manager
[ 19.097570] cx88-mpeg driver manager 0000:02:02.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 19.097584] cx88[0]/2: found at 0000:02:02.2, rev: 5, irq: 23, latency: 32, mmio: 0xf6000000
[ 19.116228] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 19.672053] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 19.672099] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 19.685231] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 19.685238] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 19.685244] cx88[0]/2: subsystem: 107d:6f2b, board: WinFast DTV2000 H ver. J (new) [card=68]
[ 19.685250] cx88[0]/2: cx2388x based DVB/ATSC card
[ 19.762548] cx2388x alsa driver version 0.0.6 loaded
[ 19.843329] tuner-simple 0-0061: attaching existing instance
[ 19.843337] tuner-simple 0-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
[ 19.847313] DVB: registering new adapter (cx88[0])
[ 19.847322] DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
[ 19.996055] intel8x0_measure_ac97_clock: measured 55386 usecs
[ 19.996061] intel8x0: clocking to 48000
[ 20.000753] cx88_audio 0000:02:02.1: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 20.000818] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 20.434024] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 24.952424] lp0: using parport0 (interrupt-driven).
[ 24.991220] w83627hf: Found W83627HF chip at 0x290
[ 25.392426] Adding 2899692k swap on /dev/sda5. Priority:-1 extents:1 across:2899692k
[ 26.025618] EXT3 FS on sda1, internal journal
[ 27.643941] type=1505 audit(1254999708.945:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4124
[ 27.966378] type=1505 audit(1254999709.269:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4129
[ 27.966850] type=1505 audit(1254999709.269:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4129
[ 28.056532] type=1505 audit(1254999709.361:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4133
[ 28.300589] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.589882] ACPI: WMI: Mapper loaded
[ 31.550654] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 36.258772] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[ 36.258785] apm: overridden by ACPI.
[ 37.152447] ppdev: user-space parallel port driver
[ 41.188662] NET: Registered protocol family 10
[ 41.191993] lo: Disabled Privacy Extensions
[ 45.888513] Bluetooth: Core ver 2.13
[ 45.892703] NET: Registered protocol family 31
[ 45.892713] Bluetooth: HCI device and connection manager initialized
[ 45.892719] Bluetooth: HCI socket layer initialized
[ 45.953796] Bluetooth: L2CAP ver 2.11
[ 45.953810] Bluetooth: L2CAP socket layer initialized
[ 45.980819] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 45.980831] Bluetooth: BNEP filters: protocol multicast
[ 46.138477] Bridge firewalling registered
[ 46.168203] Bluetooth: RFCOMM socket layer initialized
[ 46.168717] Bluetooth: RFCOMM TTY layer initialized
[ 46.168732] Bluetooth: RFCOMM ver 1.10
[ 46.225758] Bluetooth: SCO (Voice Link) ver 0.6
[ 46.225769] Bluetooth: SCO socket layer initialized
[ 48.975820] [fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset)
[ 50.561137] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 50.863083] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 50.863133] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 50.863186] fglrx_pci 0000:01:00.0: putting AGP V3 device into 8x mode
[ 50.863233] [fglrx] AGP enabled, AgpCommand = 0x1f004312 (selected caps)
[ 50.869555] [fglrx] Setup AGP aperture
[ 51.008247] NET: Registered protocol family 17
[ 51.150181] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 51.150202] [fglrx] Reserved FB block: Unshared offset:ff73000, size:88000
[ 51.150208] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
[ 60.828014] eth1: no IPv6 routers present
[ 61.456018] eth0: no IPv6 routers present
[ 112.225383] process `skype.real' is using obsolete setsockopt SO_BSDCOMPAT
[ 161.320552] ppdev0: registered pardevice
[ 161.368503] ppdev0: unregistered pardevice
[ 161.548939] ppdev0: registered pardevice
[ 161.608714] ppdev0: unregistered pardevice
[ 161.792294] ppdev0: registered pardevice
[ 161.840086] ppdev0: unregistered pardevice
Téma: výpadek zvuku (Přečteno 1737 krát)
