Detekcia monitoru (novacik)

[trud]

Na skusku som si nainstaloval Ubuntu,mam vsak zatial jednen problem..nedetekuje  mi monitor, pise "neznamy" je to LG Flatron 19´ LCD.  Preto mi ponuka len max rozlisneie 1024*768 a v tom su ikony velke ako....prasa :-)
Vie mi dakto poradit ako na vec ?

[Rover623]

Tady je téma kde už jsem špatnou detekci řešil,pročti si to,vyrob si soubor xorg,conf (/etc/X11 je umístění) a zapiš do něj potřebné informace,aby to odpovídalo stavu tvého HW
http://forum.ubuntu.cz/index.php/topic,50223.0.html

[trud]

  ...opakujem.novacik...doteraz win uzivatel....kde mam hladat  " /etc/X11/xorg.conf " netusim

[MacHala]

...opakujem.novacik...doteraz win uzivatel....kde mam hladat  " /etc/X11/xorg.conf " netusim

vis, tady na foru je takova zvyklost, ze lidi, kteri se ptaji na veci, ktere se daji bez problemu zjistit z wiki nebo vyhledavanim na foru, nejsou prilis oblibeni a povazovani za hloupe az nesvepravne (to samozrejme podstatne ovlivni kvalitu odpovedi na jejich dotazy)- pokud sis ubuntu nainstaloval melo by byt samozrejme, ze si prectes cast wiki -napr. http://wiki.ubuntu.cz/Pr%C5%AFvodce%20po%20instalaci odkud se muzes dostat na http://wiki.ubuntu.cz/Hardware a nasledne http://wiki.ubuntu.cz/Ovlada%C4%8De%20grafick%C3%BDch%20karet a http://wiki.ubuntu.cz/Nastaven%C3%AD%20monitoru

ad. ze jsi byl dosud win uzivatel - ani na microsoft helplince ti nikdo nebude vysvetlovat co je napr. C:\Documents and Settings\ , takze si vyhledej na wiki neco o adresarove strukture

[trud]

uplne na kazdom fore je uzasne vela ludi co odpoveda ako ty ....C:\Documents and Settings\ mi na help linke nik nevysvetloval ale kedze tu sa to vsetko vola inak..tazko sa to hlada.,..nasiel som to skor ako si stihol odpovedat...bohuzial ani po prepisani toho suboru to nejde....ba naopak cele to "klaklo" a uz som ubuntu asi  krat preinstaloval... monitor stale neznamy....
naco je vlastne forum ked ti ludia na nom daju odpoved ze mas citat navod ? ..to ani nemusi byt forum....a to ne je len toto forum..to je kazde forum...
este mi ponuklo instalaciu ovladac A*TI...ale po tom uz klakol cely system...nenabehlo nic..
potrebujem natvrdo vnutit monitoru 1280*1024..ale ked som vytvoril ten subor  "/etc/X11/xorg.conf" tak sa to rozbehlo len po ciernu obrazovku...
aspon poradte ako to rozbehnut nech to nemusim stale preinstalovavat ked to klakne..je tu daky navrat k predchdazjucim nastaveniam alebo dake obnovenie predosleho stavu ?

[mosqa]

naco sa niekto namaha s pisanim navodov ked ich nikto necita a potom sa tu spamuje forum 400krat tym istym??

forum je nato ked sa nevies dalej pohnut ani potom co si si nastudoval aspon dake zaklady a presiel suvisiace navody, potom sem napis aky mas problem ako si postupoval..a ked uz chces tak velmi pouzivat len forum takj si precitaj aspon pravidla fora a odporucany navod ako sa spravne pytat > http://forum.ubuntu.cz/index.php/topic,5279.0.html

[trud]

...ty si ani necital co sa pytam!..v tie linky co zadal dalsi nad tebou mam davno precitane a odskusane...nejde,,.,,pytam sa co dalej?...keby stacilo vojst do nastevni monitora a zmenit rozlisenie tak sa nepytam...jedina hodnotna odpoved bola od " Rover623  " to som skusil .ale ani to nejde...vy dvaja ste len pospamovali.,..ak nevies odpovedat..nepis...
OPAKUJEM OTAZKU..NEDETEKUJE MONITOR...postup od Rover623 odskusany...nefunguje...DALSIE RADY?

[macu]

což o to, ikony se dají zmenšit, to není problém....ale já ani ostatní asi nemáme křišťálovou kouli, takže ti jen tak někdo nemůže poradit když ani nevíme, co máš za grafickou kartu, ovladače jsi instaloval/neinstaloval atd.... doporučil bych ti přečíst tohle http://forum.ubuntu.cz/index.php/topic,5279.0.html  

nezlob se na ostatní uživatele, vím, že spousta lidí nadává, že "linuxová" komunita je občas nepřátelská vůči nováčkům, nicméně když si koupíš např. novou pračku tak si taky přečteš napřed návod abys věděl, jak ji používat ne? proto si myslím, že odkazy kolegů byly pro tebe relevantní alespoň pro objasnění základního prostředí Ubuntu

[Rover623]

Chtělo by to vědět několik věcí,jaká je grafika,ale podle toho postupu jsem pochopil,že máš nějakou Ati,potom,protože jak jsem vyrozuměl po instalaci uzavřených ovladačů (Systém-Správa-Dodatečné ovladače) ti už nenaběhne X server (grafické prostředí),tak jestli není v BIOSu povoleno přepínání grafik,je to spíš doména notebooku,ale viděl jsem to i na desktopech.

Takže typ monitoru máme.
Takže jaká je grafika?
Nabízí systém uzavřené ovladače a co se stane po jejich instalaci?

[trud]

vdaka " Rover623  " grafika je ATI na zakladnej doske...konkretne ATI Radeon HD 4290GPU , ponuklo mi to len "neslobodny " ovladac  a ten poslal cely system do kolien...preto sa aj pytam ci sa to da dako obnovit..aby som nemusel preinstalovat...notebok to ne je .aj ked tou grafikou na doske ma asi k noteboku blizko...
Ze som nenapisal presne parametre PC- moja chyba...sory...

[petertomasy]

napíš do termiálu toto a pošli to sem

lspci -nnv

[trud]

Kód: [Vybrat]

00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
Subsystem: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate [1022:9601]
Flags: bus master, 66MHz, medium devsel, latency 0
Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe600000-fe7fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: <access denied>
Kernel modules: shpchp

00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (rev 40) (prog-if 01 [AHCI 1.0])
Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 43
I/O ports at a000 [size=8]
I/O ports at 9000 [size=4]
I/O ports at 8000 [size=8]
I/O ports at 7000 [size=4]
I/O ports at 6000 [size=16]
Memory at fe5ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe5fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe5ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe5fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe5ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 41)
Flags: 66MHz, medium devsel
Kernel modules: i2c-piix4

00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (rev 40) (prog-if 8a [Master SecP PriP])
Subsystem: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ff00 [size=16]
Kernel driver in use: pata_atiixp
Kernel modules: pata_atiixp

00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
Subsystem: ASUSTeK Computer Inc. Device [1043:8410]
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at fe5f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] (rev 40)
Subsystem: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff

00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe5fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:15.0 PCI bridge [0604]: ATI Technologies Inc Device [1002:43a0] (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:16.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fe5f7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:16.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fe5ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Flags: fast devsel
Kernel modules: amd64_edac_mod

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Flags: fast devsel
Capabilities: <access denied>
Kernel driver in use: k10temp
Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Flags: fast devsel

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS880 [Radeon HD 4290] [1002:9714] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8454]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at b000 [size=256]
Memory at fe7f0000 (32-bit, non-prefetchable) [size=64K]
Memory at fe600000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeon

01:05.1 Audio device [0403]: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
Subsystem: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] [1002:970f]
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at fe7e8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at fe8fe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB361 AHCI/IDE [197b:2361] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Flags: bus master, fast devsel, latency 0, IRQ 19
I/O ports at cc00 [size=8]
I/O ports at c880 [size=4]
I/O ports at c800 [size=8]
I/O ports at c480 [size=4]
I/O ports at c400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron

03:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe]
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K]
I/O ports at dc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci, ohci1394

04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
Subsystem: ASUSTeK Computer Inc. Device [1043:8432]
Flags: bus master, fast devsel, latency 0, IRQ 42
I/O ports at e800 [size=256]
Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

trud@trudova-masinka:~$

[trud]

Tak co chlapy? Daka rada?