Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Televizní karta MSI digivox Micro HD  (Přečteno 1515 krát)

B. Goode

  • Návštěvník
  • Příspěvků: 20
Televizní karta MSI digivox Micro HD
« kdy: 15 Května 2011, 13:28:51 »
Ahoj

Nemáte prosím někdo zkušenosti s instalací ovladače pro Digivox Micro HD? Našel jsem několik návodů, ale ani jeden nefunkuje. Po zadání lsusb je karta hlásí jako Bus 001 Device 003: ID 1d19:1104 Dexatek Technology Ltd.
Používám Ubuntu 11.04 32bit.

Děkuju za pomoc
« Poslední změna: 15 Května 2011, 13:31:09 od B. Goode »

petertomasy

  • Stálý člen
  • **
  • Příspěvků: 865
Re: Televizní karta MSI digivox Micro HD
« Odpověď #1 kdy: 15 Května 2011, 16:40:42 »
Kód: [Vybrat]
lsusb -vv
dmesg
pošli to v code (#)

B. Goode

  • Návštěvník
  • Příspěvků: 20
Re: Televizní karta MSI digivox Micro HD
« Odpověď #2 kdy: 15 Května 2011, 19:27:40 »
lsusb -vv:
Kód: [Vybrat]
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 002 Device 002: ID 1d19:1104 Dexatek Technology Ltd.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x1d19 Dexatek Technology Ltd.
  idProduct          0x1104
  bcdDevice            1.00
  iManufacturer           1
  iProduct                2
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          4
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           0
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              5
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

dmesg:
Kód: [Vybrat]
[    0.216225] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.216228] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.216230] pnp 00:00: [io  0x0d00-0xffff window]
[    0.216232] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.216234] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    0.216236] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.216238] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[    0.216312] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.216322] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    0.216380] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.216383] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.216420] pnp 00:02: [dma 4]
[    0.216421] pnp 00:02: [io  0x0000-0x000f]
[    0.216423] pnp 00:02: [io  0x0081-0x0083]
[    0.216425] pnp 00:02: [io  0x0087]
[    0.216427] pnp 00:02: [io  0x0089-0x008b]
[    0.216429] pnp 00:02: [io  0x008f]
[    0.216430] pnp 00:02: [io  0x00c0-0x00df]
[    0.216457] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.216469] pnp 00:03: [io  0x0070-0x0071]
[    0.216482] pnp 00:03: [irq 8]
[    0.216509] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.216518] pnp 00:04: [io  0x0061]
[    0.216544] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.216552] pnp 00:05: [io  0x00f0-0x00ff]
[    0.216557] pnp 00:05: [irq 13]
[    0.216586] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.216869] pnp 00:06: [io  0x03f0-0x03f5]
[    0.216871] pnp 00:06: [io  0x03f7]
[    0.216876] pnp 00:06: [irq 6]
[    0.216877] pnp 00:06: [dma 2]
[    0.216932] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.216994] pnp 00:07: [io  0x0000-0xffffffff disabled]
[    0.216996] pnp 00:07: [io  0x0000-0xffffffff disabled]
[    0.216998] pnp 00:07: [io  0x0290-0x029f]
[    0.217049] system 00:07: [io  0x0290-0x029f] has been reserved
[    0.217052] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.217146] pnp 00:08: [io  0x0010-0x001f]
[    0.217148] pnp 00:08: [io  0x0022-0x003f]
[    0.217150] pnp 00:08: [io  0x0044-0x004d]
[    0.217152] pnp 00:08: [io  0x0050-0x005f]
[    0.217153] pnp 00:08: [io  0x0062-0x0063]
[    0.217155] pnp 00:08: [io  0x0065-0x006f]
[    0.217157] pnp 00:08: [io  0x0072-0x007f]
[    0.217159] pnp 00:08: [io  0x0080]
[    0.217160] pnp 00:08: [io  0x0084-0x0086]
[    0.217162] pnp 00:08: [io  0x0088]
[    0.217164] pnp 00:08: [io  0x008c-0x008e]
[    0.217166] pnp 00:08: [io  0x0090-0x009f]
[    0.217168] pnp 00:08: [io  0x00a2-0x00bf]
[    0.217169] pnp 00:08: [io  0x00e0-0x00ef]
[    0.217171] pnp 00:08: [io  0x04d0-0x04d1]
[    0.217173] pnp 00:08: [io  0x0800-0x087f]
[    0.217175] pnp 00:08: [io  0x0400-0x03ff disabled]
[    0.217177] pnp 00:08: [io  0x0500-0x057f]
[    0.217179] pnp 00:08: [mem 0xfed08000-0xfed08fff]
[    0.217181] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    0.217183] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[    0.217185] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[    0.217253] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.217256] system 00:08: [io  0x0800-0x087f] has been reserved
[    0.217258] system 00:08: [io  0x0500-0x057f] has been reserved
[    0.217261] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[    0.217264] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.217266] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.217269] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.217272] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.217338] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    0.217367] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.217415] pnp 00:0a: [mem 0xffb00000-0xffbfffff]
[    0.217417] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[    0.217446] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[    0.217485] pnp 00:0b: [mem 0xffc00000-0xffefffff]
[    0.217533] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
[    0.217536] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.217776] pnp 00:0c: [io  0x03f8-0x03ff]
[    0.217782] pnp 00:0c: [irq 4]
[    0.217784] pnp 00:0c: [dma 0 disabled]
[    0.217844] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.217942] pnp 00:0d: [io  0x0060]
[    0.217947] pnp 00:0d: [io  0x0064]
[    0.217949] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[    0.217951] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[    0.218001] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.218004] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.218007] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.218071] pnp 00:0e: [mem 0xe0000000-0xefffffff]
[    0.218119] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
[    0.218122] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.218299] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[    0.218301] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[    0.218303] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[    0.218305] pnp 00:0f: [mem 0x00100000-0x7fffffff]
[    0.218307] pnp 00:0f: [mem 0xe0000000-0xffffffff]
[    0.218371] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.218373] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.218376] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.218379] system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
[    0.218381] system 00:0f: [mem 0xe0000000-0xffffffff] could not be reserved
[    0.218384] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.218510] pnp: PnP ACPI: found 16 devices
[    0.218512] ACPI: ACPI bus type pnp unregistered
[    0.218515] PnPBIOS: Disabled by ACPI PNP
[    0.254791] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[    0.254796] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.254799] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.254802] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.254805] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.254809] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.254812] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.254816] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[    0.254819] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.254824] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x803fffff]
[    0.254829] pci 0000:00:1c.0:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.254834] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[    0.254837] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.254842] pci 0000:00:1c.5:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.254846] pci 0000:00:1c.5:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.254853] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    0.254855] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.254860] pci 0000:00:1e.0:   bridge window [mem 0xf8000000-0xfebfffff]
[    0.254864] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.254890] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.254894] pci 0000:00:01.0: setting latency timer to 64
[    0.254899] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.254906] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.254910] pci 0000:00:1c.0: setting latency timer to 64
[    0.254916] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.254920] pci 0000:00:1c.5: setting latency timer to 64
[    0.254926] pci 0000:00:1e.0: setting latency timer to 64
[    0.254929] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.254931] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.254934] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.254936] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.254938] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[    0.254940] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    0.254942] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.254944] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.254946] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.254949] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.254951] pci_bus 0000:03: resource 1 [mem 0x80000000-0x803fffff]
[    0.254953] pci_bus 0000:03: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.254955] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.254957] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.254959] pci_bus 0000:02: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.254962] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.254964] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfebfffff]
[    0.254966] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.254968] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.254970] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.254972] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.254975] pci_bus 0000:04: resource 8 [mem 0x80000000-0xdfffffff]
[    0.254977] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff]
[    0.255018] NET: Registered protocol family 2
[    0.255097] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.255325] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.255791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.256044] TCP: Hash tables configured (established 131072 bind 65536)
[    0.256047] TCP reno registered
[    0.256050] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.256059] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.256159] NET: Registered protocol family 1
[    0.256320] pci 0000:01:00.0: Boot video device
[    0.256331] PCI: CLS 32 bytes, default 64
[    0.256536] cpufreq-nforce2: No nForce2 chipset.
[    0.256657] audit: initializing netlink socket (disabled)
[    0.256666] type=2000 audit(1305450410.252:1): initialized
[    0.264991] highmem bounce pool size: 64 pages
[    0.264997] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.266661] VFS: Disk quotas dquot_6.5.2
[    0.266719] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.267336] fuse init (API version 7.16)
[    0.267424] msgmni has been set to 1678
[    0.267640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.267665] io scheduler noop registered
[    0.267667] io scheduler deadline registered
[    0.267680] io scheduler cfq registered (default)
[    0.267794] pcieport 0000:00:01.0: setting latency timer to 64
[    0.267826] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.267877] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.267914] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.267970] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.268024] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[    0.268103] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.268124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.268191] intel_idle: MWAIT substates: 0x22220
[    0.268193] intel_idle: does not run on family 6 model 23
[    0.268292] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.268297] ACPI: Power Button [PWRB]
[    0.268345] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.268347] ACPI: Power Button [PWRF]
[    0.268518] ACPI: acpi_idle registered with cpuidle
[    0.270112] ERST: Table is not found!
[    0.270206] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.280050] isapnp: Scanning for PnP cards...
[    0.290564] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.413212] Freeing initrd memory: 12524k freed
[    0.632983] isapnp: No Plug & Play device found
[    0.657892] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.658216] Linux agpgart interface v0.103
[    0.659567] brd: module loaded
[    0.660142] loop: module loaded
[    0.660222] i2c-core: driver [adp5520] using legacy suspend method
[    0.660224] i2c-core: driver [adp5520] using legacy resume method
[    0.660324] ata_piix 0000:00:1f.2: version 2.13
[    0.660349] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.660353] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.660398] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.660712] scsi0 : ata_piix
[    0.660795] scsi1 : ata_piix
[    0.662191] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.662196] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.662216] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.662220] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.662263] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.662473] scsi2 : ata_piix
[    0.662534] scsi3 : ata_piix
[    0.663561] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.663565] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.663918] Fixed MDIO Bus: probed
[    0.663955] PPP generic driver version 2.4.2
[    0.663996] tun: Universal TUN/TAP device driver, 1.6
[    0.664008] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.664086] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.664106] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.664118] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.664122] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.664158] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.664201] ehci_hcd 0000:00:1a.7: debug port 1
[    0.668092] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.668105] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7dffc00
[    0.680019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.680176] hub 1-0:1.0: USB hub found
[    0.680180] hub 1-0:1.0: 6 ports detected
[    0.680259] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.680268] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.680271] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.680304] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.680344] ehci_hcd 0000:00:1d.7: debug port 1
[    0.684234] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.684247] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7dff800
[    0.700018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.700160] hub 2-0:1.0: USB hub found
[    0.700164] hub 2-0:1.0: 6 ports detected
[    0.700235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.700248] uhci_hcd: USB Universal Host Controller Interface driver
[    0.700269] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.700275] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.700278] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.700320] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.700364] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.700477] hub 3-0:1.0: USB hub found
[    0.700481] hub 3-0:1.0: 2 ports detected
[    0.700549] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.700554] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.700557] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.700590] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.700630] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.700746] hub 4-0:1.0: USB hub found
[    0.700750] hub 4-0:1.0: 2 ports detected
[    0.700811] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.700816] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.700819] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.700852] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.704052] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.704187] hub 5-0:1.0: USB hub found
[    0.704191] hub 5-0:1.0: 2 ports detected
[    0.704252] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.704257] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.704260] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.704296] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.704329] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.704440] hub 6-0:1.0: USB hub found
[    0.704444] hub 6-0:1.0: 2 ports detected
[    0.704507] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.704513] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.704516] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.704549] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.704582] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.704692] hub 7-0:1.0: USB hub found
[    0.704695] hub 7-0:1.0: 2 ports detected
[    0.704761] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.704768] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.704771] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.704808] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.704841] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.704949] hub 8-0:1.0: USB hub found
[    0.704952] hub 8-0:1.0: 2 ports detected
[    0.705081] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.707889] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.707895] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.708021] mousedev: PS/2 mouse device common for all mice
[    0.708142] rtc_cmos 00:03: RTC can wake from S4
[    0.708194] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.708217] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.708294] device-mapper: uevent: version 1.0.3
[    0.708366] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.708423] device-mapper: multipath: version 1.2.0 loaded
[    0.708426] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.708495] EISA: Probing bus 0 at eisa.0
[    0.708497] EISA: Cannot allocate resource for mainboard
[    0.708499] Cannot allocate resource for EISA slot 1
[    0.708501] Cannot allocate resource for EISA slot 2
[    0.708502] Cannot allocate resource for EISA slot 3
[    0.708504] Cannot allocate resource for EISA slot 4
[    0.708506] Cannot allocate resource for EISA slot 5
[    0.708507] Cannot allocate resource for EISA slot 6
[    0.708509] Cannot allocate resource for EISA slot 7
[    0.708510] Cannot allocate resource for EISA slot 8
[    0.708512] EISA: Detected 0 cards.
[    0.708559] cpuidle: using governor ladder
[    0.708561] cpuidle: using governor menu
[    0.708820] TCP cubic registered
[    0.708940] NET: Registered protocol family 10
[    0.709470] NET: Registered protocol family 17
[    0.709486] Registering the dns_resolver key type
[    0.709933] Using IPI No-Shortcut mode
[    0.710016] PM: Hibernation image not present or could not be loaded.
[    0.710028] registered taskstats version 1
[    0.710295]   Magic number: 11:138:121
[    0.710379] rtc_cmos 00:03: setting system clock to 2011-05-15 09:06:51 UTC (1305450411)
[    0.710382] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.710383] EDD information not available.
[    0.990591] ata4: SATA link down (SStatus 0 SControl 300)
[    1.001179] ata3: SATA link down (SStatus 0 SControl 300)
[    1.176017] usb 3-2: new low speed USB device using uhci_hcd and address 2
[    1.256017] Refined TSC clocksource calibration: 2500.088 MHz.
[    1.256023] Switching to clocksource tsc
[    1.456069] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.456083] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.464579] ata2.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133
[    1.464584] ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.468066] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.468082] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.472591] ata2.00: configured for UDMA/133
[    1.484370] ata1.00: ATA-8: WDC WD6401AALS-00L3B2, 01.03B01, max UDMA/133
[    1.484375] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.484384] ata1.01: ATAPI: ASUS    DRW-24B1LT, 1.01, max UDMA/100
[    1.492419] ata1.00: configured for UDMA/133
[    1.508123] ata1.01: configured for UDMA/100
[    1.508930] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5
[    1.509059] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.509062] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.509110] sd 0:0:0:0: [sda] Write Protect is off
[    1.509112] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.509190] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.510176] scsi 0:0:1:0: CD-ROM            ASUS     DRW-24B1LT       1.01 PQ: 0 ANSI: 5
[    1.524879] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.524884] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.524986] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    1.525036] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    1.525142] scsi 1:0:0:0: Direct-Access     ATA      WDC WD6401AALS-0 01.0 PQ: 0 ANSI: 5
[    1.525237] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.525261] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    1.525283] sd 1:0:0:0: [sdb] Write Protect is off
[    1.525285] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.525312] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.544665]  sdb: sdb1 sdb2 < sdb5 >
[    1.544951] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.553187]  sda: sda1 sda2 sda3 < sda5 > sda4
[    1.553539] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.553570] Freeing unused kernel memory: 700k freed
[    1.553807] Write protecting the kernel text: 5192k
[    1.553847] Write protecting the kernel read-only data: 2148k
[    1.573444] <30>udev[71]: starting version 167
[    1.631877] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.631889] ATL1E 0000:02:00.0: setting latency timer to 64
[    1.671077] Floppy drive(s): fd0 is 1.44M
[    1.688063] FDC 0 is a post-1991 82077
[    1.689489] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.692995] usbcore: registered new interface driver usbhid
[    1.692997] usbhid: USB HID core driver
[    1.744091] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    1.744186] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
[    1.744301] logitech 0003:046D:C512.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
[    1.776423] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
[    1.776552] logitech 0003:046D:C512.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input1
[    1.918199] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.244145] firewire_core: created device fw0: GUID 001e8c000180265c, S400
[    8.408678] <30>udev[292]: starting version 167
[    8.449616] lp: driver loaded but no devices found
[    8.487741] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    8.487747] Disabling lock debugging due to kernel taint
[    8.498116] Adding 1953788k swap on /dev/sda4.  Priority:-1 extents:1 across:1953788k
[    8.762102] type=1400 audit(1305450419.547:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=559 comm="apparmor_parser"
[    8.762864] type=1400 audit(1305450419.547:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559 comm="apparmor_parser"
[    8.763343] type=1400 audit(1305450419.547:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=559 comm="apparmor_parser"
[    8.764962] type=1400 audit(1305450419.551:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=565 comm="apparmor_parser"
[    8.765727] type=1400 audit(1305450419.551:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=565 comm="apparmor_parser"
[    8.766209] type=1400 audit(1305450419.551:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=565 comm="apparmor_parser"
[    8.848254] [fglrx] Maximum main memory to use for locked dma buffers: 1884 MBytes.
[    8.848961] [fglrx]   vendor: 1002 device: 95c5 count: 1
[    8.850377] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[    8.850390] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.850395] pci 0000:01:00.0: setting latency timer to 64
[    8.850816] [fglrx] Kernel PAT support is enabled
[    8.850840] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors
[    8.868033] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.916739] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    8.916785] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    8.916809] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.923462] SB-XFi 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.960946] hda_codec: ALC1200: BIOS auto-probing.
[    8.972648] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    8.972940] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    8.973002] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[    8.973025] HDA Intel 0000:01:00.1: setting latency timer to 64
[    9.115491] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    9.289586] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.340710] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    9.397991] vesafb: framebuffer at 0xd0000000, mapped to 0xf9c80000, using 5120k, total 5120k
[    9.397995] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    9.397996] vesafb: scrolling: redraw
[    9.397999] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    9.398164] Console: switching to colour frame buffer device 160x64
[    9.398194] fb0: VESA VGA frame buffer device
[    9.493912] ppdev: user-space parallel port driver
[    9.508445] type=1400 audit(1305450420.295:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=871 comm="apparmor_parser"
[    9.511505] type=1400 audit(1305450420.295:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=871 comm="apparmor_parser"
[    9.576564] ATL1E 0000:02:00.0: irq 45 for MSI/MSI-X
[    9.576720] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[    9.576787] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.576917] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   10.457090] type=1400 audit(1305450421.243:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=902 comm="apparmor_parser"
[   10.459732] type=1400 audit(1305450421.243:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=903 comm="apparmor_parser"
[   10.753586] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[   10.754323] [fglrx] Firegl kernel thread PID: 1056
[   10.754374] [fglrx] Firegl kernel thread PID: 1057
[   10.754424] [fglrx] Firegl kernel thread PID: 1058
[   10.754652] [fglrx] IRQ 46 Enabled
[   11.022162] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   11.025137] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[   11.098907] EXT4-fs (sda5): re-mounted. Opts: commit=0
[   11.104181] EXT4-fs (sdb5): re-mounted. Opts: commit=0
[   12.416949] [fglrx] Gart USWC size:628 M.
[   12.416952] [fglrx] Gart cacheable size:247 M.
[   12.416956] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   12.416958] [fglrx] Reserved FB block: Unshared offset:fe03000, size:1f9000
[   12.416960] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
[   16.919052] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
[   17.733070] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   17.735460] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[   17.737587] EXT4-fs (sda5): re-mounted. Opts: commit=0
[   17.739612] EXT4-fs (sdb5): re-mounted. Opts: commit=0
[   20.336009] eth0: no IPv6 routers present
[18074.912519] end_request: I/O error, dev fd0, sector 0
[29627.912028] usb 2-3: new high speed USB device using ehci_hcd and address 2

smurfik

  • Návštěvník
  • Příspěvků: 33
Re: Televizní karta MSI digivox Micro HD
« Odpověď #3 kdy: 21 Května 2011, 18:23:33 »
Také bych s tímto tunerem potřeboval pomoct:( problém je od nove verze jadra - co jsem pochopil.
Nasel jsem k tomu co by mohlo byt uzitecne:
http://forum.ubuntuusers.de/topic/baustelle-msi-digi-vox-mini-v3-0-realtek-chip/3/
http://wiki.ubuntuusers.de/MSI_DigiVox_mini_II#DigiVox-mini-II-V3-0-auch-DigiVox-mini-deluxe-ID-1d19-1101

Tady ma clovicek ovladace pro ten chip RTL2832U  na nove jadro, ale zrejmne ne pro tuner MSI
http://jms.id.au/wiki/EzcapDvbAdapter
...vse se tvari jako by to melo fungovat ale kdyz pak chci tuner spustit, kazdy program na sledovani TV se sekne.
 

 

Provoz zaštiťuje spolek OpenAlt.