Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Externí disk nefunguje přes USB 3.0  (Přečteno 7225 krát)

Chorches

  • Návštěvník
  • Příspěvků: 4
Externí disk nefunguje přes USB 3.0
« kdy: 28 Srpna 2014, 09:50:08 »
Ahoj,
chtěl bych poprosit o pomoc s připojením externího disku přes USB 3.0.

Mám disk Samsung M3 Portable 1TB a když ho připojím do portu USB 2.0, vše funguje jak má, když ho připojím do portu USB 3.0, tak se "nechytne" - neobjeví se v Nautilu, neobjeví se v "/media" ani v "/dev". Pouze z kern.logu jsem vyčetl, že ho systém nějak zaznamenal. Rovněž jsem zkusil příkaz dmesg, jehož výsledek přikládám. Jsou tam asi vidět nějaké chyby, ale tomu už nerozumím.
Jinak USB 3.0 porty jsou snad v pořádku, což vyvozuji z toho, že obyčejná flashka v nich funguje bez problémů.
Rovněž jsem disk zkoušel na jiném počítači s Win8 přes USB 3.0, a funguje bez problému.
Taky jsem zkoušel připojit doma jiný externí disk (Transcend), a výsledek stejný, nepomohl ani zdvojený USB kabel.
Systém je 12.04, aktualizace pouštím pravidelně.
Udělal jsem i aktualizaci BIOSu a zkoušel nějaká nastavení ohledně USB portů, nic nepomáhá.

Za jakoukoliv radu moc děkuji.
Jirka

[příloha smazaná administrátorem]

RRRadek Neužil

  • Člen občanského sdružení Ubuntu ČR a placené komunitní podpory
  • Administrátor fóra
  • Závislák
  • ******
  • Příspěvků: 4672
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #1 kdy: 28 Srpna 2014, 10:30:39 »
Já bych to viděl na nedostatečné napětí v tom USB3 portu, i když zdvojený kabel by měl v tomto případě pomoci kdy nejdříve zapojit napájecí do USB2 a až potom datový do USB3, ale i tak to není jistota že to bude fungovat. Potom je možnost externě napájený USB hub viz...
http://www.alza.cz/premiumcord-4-portovy-d249572.htm
http://www.alza.cz/icy-box-ac610-d2121041.htm
http://www.alza.cz/hama-14-s-napajenim-d466469.htm

Taky u některých externích disků je možnost připojit přímo adaptér viz foto... potom k němu stačí koupit dostatečně silný adaptér kdy 5V 2A musí stačit.
http://reviewthetech.com/wp-content/uploads/2011/07/nexstar6.jpg

Ještě existuje možnost měnit napětí u některých počítačů ale to je složitější a od jádra 2,6 to je asi vše úplně jinak.
PS: omluvte moji češtinu není to moje silná stránka, snažím se hlavně vystihnou podstatu problému. ;)

Savalas

  • Aktivní člen
  • *
  • Příspěvků: 409
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #2 kdy: 28 Srpna 2014, 11:07:11 »
Pro me pod ubuntu USB3 proste normalne nefunguje http://forum.ubuntu.cz/index.php?topic=71793.msg518885#msg518885 , jedine, skuz si dat s tim pripojenym diskem restart, obcas se mi to podarilo takhle primet k slusne cinost a logy byly bez "xHCI xhci_drop_endpoint called with disabled ep".
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

Chorches

  • Návštěvník
  • Příspěvků: 4
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #3 kdy: 29 Srpna 2014, 09:26:51 »
Díky moc za odpovědi, tak teď jsem vlastně rád, že to funguje aspoň přes tu USB 2.0  ;)
Dvojitý drát opravdu nepomohl a ty další varianty nemám jak vyzkoušet a ani mi to nepřijde moc nadějné.
Myslím si správně, že většině lidí externí disky přes USB 3.0 fungujou normálně?
Možná je to dáno základní deskou, je to ASUS P8H67. V manuálu píšou u USB 3.0 portu, že je podporován jen ve Windowsech, tak teď tomu už i věřím  ;)

marun

  • Stálý člen
  • **
  • Příspěvků: 601
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #4 kdy: 29 Srpna 2014, 12:33:03 »
zapoj disk do usb3 počkej chvíli (i delší) a pak nám sem dej výstup z
Kód: [Vybrat]
lsusb -va
Kód: [Vybrat]
lspci -k
a taky mě napadlo jestli není nějaká zmínka v biosu o xhci popřípadě *hci

RRRadek Neužil

  • Člen občanského sdružení Ubuntu ČR a placené komunitní podpory
  • Administrátor fóra
  • Závislák
  • ******
  • Příspěvků: 4672
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #5 kdy: 29 Srpna 2014, 13:55:06 »
Já používám svůj externí disk 2,5" na USB3 každý den, a vzhledem k tomu že ho používám na zálohování dat přes live usb Ubuntu tak to mám otestováno na desítkách počítačů a všude mi to doposavad fungovalo. Jen jsem jednomu zákazníkovy řešil že mu to nefungovalo na jednom tabletonotebooku kde se musel připojit externí zdroj aby to utáhlo.
PS: omluvte moji češtinu není to moje silná stránka, snažím se hlavně vystihnou podstatu problému. ;)

Myrmica

  • Závislák
  • ***
  • Příspěvků: 1701
    • MYRMICA
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #6 kdy: 29 Srpna 2014, 14:40:49 »
Hodilo by se dát i výpis chvíli po zapnutí disku do USB:
Kód: [Vybrat]
dmesg | grep "USB" | tail -25
Stolní strojek: OS– UBUNTU 16.04 x86_64, MB ASUS P8 Z68-V/GEN3, Intel® Core™ i5-3470 CPU @ 3.20GHz × 4 , 16GiB DDR3, GeForce GTX 670...
Notebook: ASUS U53Jc OS– UBUNTU 16.04 x86_64, Windows 7, Processor – Intel Core i5-460M (2,53 GHz), Graphics – switchable NVIDIA GeForce 310M and Intel GMA HD

Chorches

  • Návštěvník
  • Příspěvků: 4
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #7 kdy: 29 Srpna 2014, 18:21:17 »
Přikládám výsledky.

Kód: [Vybrat]
mycomp@mycomp-desktop:~$ lsusb -v

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.02
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.02
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            3.02
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         3
  bMaxPacketSize0         9
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0003 3.0 root hub
  bcdDevice            3.02
  iManufacturer           3
  iProduct                2
  iSerial                 1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           31
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
        bMaxBurst               0

Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 Intel Corp.
  idProduct          0x0024 Integrated Rate Matching Hub
  bcdDevice            0.00
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         1 Single TT
  bMaxPacketSize0        64
  idVendor           0x8087 Intel Corp.
  idProduct          0x0024 Integrated Rate Matching Hub
  bcdDevice            0.00
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval              12

Bus 002 Device 003: ID 03f0:2e24 Hewlett-Packard LP2275w Monitor Hub
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0 Unused
  bDeviceProtocol         2 TT per port
  bMaxPacketSize0        64
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x2e24 LP2275w Monitor Hub
  bcdDevice            0.00
  iManufacturer           0
  iProduct                0
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           41
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      1 Single TT
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       1
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      2 TT per port
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0001  1x 1 bytes
        bInterval              12

Bus 002 Device 004: ID 0458:002e KYE Systems Corp. (Mouse Systems)
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x0458 KYE Systems Corp. (Mouse Systems)
  idProduct          0x002e
  bcdDevice            1.10
  iManufacturer           2
  iProduct                1
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.10
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              10

Bus 004 Device 002: ID 04e8:61b6 Samsung Electronics Co., Ltd
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               3.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         9
  idVendor           0x04e8 Samsung Electronics Co., Ltd
  idProduct          0x61b6
  bcdDevice           13.01
  iManufacturer           1
  iProduct                2
  iSerial                 3
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           44
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              6
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0400  1x 1024 bytes
        bInterval               0
        bMaxBurst              15




mycomp@mycomp-desktop:~$ lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Subsystem: ASUSTeK Computer Inc. Device 844d
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Kernel driver in use: mei
Kernel modules: mei
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 8444
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.7 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation H67 Express Chipset Family LPC Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 844d
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Kernel modules: i2c-i801
03:00.0 IDE interface: VIA Technologies, Inc. VT6415 PATA IDE Host Controller
Subsystem: ASUSTeK Computer Inc. M5A88-V EVO
Kernel driver in use: pata_via
Kernel modules: pata_via
04:00.0 USB controller: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
Subsystem: ASUSTeK Computer Inc. Device 8488
Kernel driver in use: xhci_hcd
05:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)
Subsystem: ASUSTeK Computer Inc. Device 847e
Kernel driver in use: atl1c
Kernel modules: atl1c
06:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 01)




mycomp@mycomp-desktop:~$ dmesg | grep "USB" | tail -25
[    1.287335] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.287441] hub 2-0:1.0: USB hub found
[    1.287481] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.287487] uhci_hcd: USB Universal Host Controller Interface driver
[    1.287558] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    1.297385] hub 3-0:1.0: USB hub found
[    1.297450] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[    1.297524] hub 4-0:1.0: USB hub found
[    1.583131] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.715664] hub 1-1:1.0: USB hub found
[    1.826933] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.959509] hub 2-1:1.0: USB hub found
[    2.230689] usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
[    2.323663] hub 2-1.5:1.0: USB hub found
[    2.394675] usb 2-1.6: new low-speed USB device number 4 using ehci_hcd
[    2.531804] generic-usb 0003:0458:002E.0001: input,hidraw0: USB HID v1.10 Mouse [Genius NetScroll + Traveler] on usb-0000:00:1d.0-1.6/input0
[    2.531824] usbhid: USB HID core driver
[   24.675312] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[   24.691668] Initializing USB Mass Storage driver...
[   24.691962] USB Mass Storage support registered.
[   56.033529] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[   87.079394] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  118.029657] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  148.979755] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
[  179.929760] usb 4-1: reset SuperSpeed USB device number 2 using xhci_hcd
mycomp@mycomp-desktop:~$

V BIOSu mám volby, týkající se USB:

Legacy USB Support [Enabled]
Legacy USB3.0 Support [Enabled]
EHCI Hand-off [Disabled]  (píšou, že zapíná podporu pro OS bez funkce EHCI hand-off, zkoušel jsem změnit, nepomohlo)
Asmedia USB 3.0 Controller [Enabled]

Díky za pomoc.

marun

  • Stálý člen
  • **
  • Příspěvků: 601
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #8 kdy: 29 Srpna 2014, 19:21:15 »
podle lsusb ten disk vidí ale je tam divná hodnota max power = 2mA (myš žere víc)
napadá mě jestli není poškozený kabel (pro usb3 jsou tam další piny)
a) zkus ten disk s tím kabelem na jiném pc s usb3
b) zkus tento disk s jiným kabelem na stejném pc

Chorches

  • Návštěvník
  • Příspěvků: 4
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #9 kdy: 29 Srpna 2014, 20:36:36 »
Obojí jsem zkoušel, disk i s mým kabelem na noťasu s Win8 chodilo na usb3 v pohodě.
Disk ani se zapůjčeným zdvojeným kabelem na domácím Ubuntu nic.
Ještě jsem možná nenapsal, že ten disk se normálně roztočí a kontrolka svítí, a na to by myslím 2mA nestačily
« Poslední změna: 29 Srpna 2014, 20:44:06 od Chorches »

Savalas

  • Aktivní člen
  • *
  • Příspěvků: 409
Re:Externí disk nefunguje přes USB 3.0
« Odpověď #10 kdy: 29 Srpna 2014, 20:45:19 »
XHCI problem se kablikama nevyresi, problem je v jadru https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1271268 (nebo jine), jedina moznost pouzivat USB2, ale me jaksik ctecka de strcit jen do interniho USB3 a tak mam za 500 jen ozdobu, tak dokat to se to nevyresi, aby nezlobil system, ji musim mit vypojenou.
Kubuntu 18.04/AMD RYZEN 5 3600, Asus PRIME X370-PRO, ASUS DUAL GeForce RTX2060S O8G EVO, RAM Kingston 2x16GB DDR4 2666MHz CL16, 2xWD Caviar Blue 1TB+Seagate BarraCuda 2TB/LVM mirror, Samsung 970 EVO PLUS 250GB, Seasonic M12II-620 Evo, Evolveo Sigma T2, DVD-R/+R Asus DRW-24D5MT, APC Back-UPS ES 700, Eizo EV2450

 

Provoz zaštiťuje spolek OpenAlt.