Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: dell d505 a rozlišení LCD  (Přečteno 1323 krát)

horac

  • Návštěvník
  • Příspěvků: 2
dell d505 a rozlišení LCD
« kdy: 09 Března 2007, 14:48:04 »
ahoj,

mám dotaz, v notebooku dell latitude D505 s grafikou INTEL 82852/855GM mám displej s rozlišením 1400x1050, ale UBUNTU stále nedokážu přesvědčit abych rozlišení dosáhl... stále jen 1280x1024

V systém-volby-rozlišení obrazovky je v nabídce jen 1280x1024, 1024x768, 800x600 a 640x480...

V xorg.conf je ale zase jen 1400x1050

Sem začátečník a nevím si rady :-) takže prosím o návod (nejlépe krok po kroku)

díky

P.S. zkoušel jsem přidat do sekce Monitor v xorg.conf řádku

# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
        Modeline "1400x1050_60.00"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync

ale to pak grafický režim nenaběhnul vůbec...



výpis původního xorg.conf

-----------------------------------------------------------------------------------------------------------------------

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
   FontPath   "/usr/share/X11/fonts/misc"
   FontPath   "/usr/share/X11/fonts/cyrillic"
   FontPath   "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath   "/usr/share/X11/fonts/Type1"
   FontPath   "/usr/share/X11/fonts/100dpi"
   FontPath   "/usr/share/X11/fonts/75dpi"
   FontPath   "/usr/share/fonts/X11/misc"
   # path to defoma fonts
   FontPath   "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load   "i2c"
   Load   "bitmap"
   Load   "ddc"
   Load   "dri"
   Load   "extmod"
   Load   "freetype"
   Load   "glx"
   Load   "int10"
   Load   "type1"
   Load   "vbe"
EndSection

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "CoreKeyboard"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "cz"
   Option      "XkbOptions"   "lv3:ralt_switch"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
   Option      "Device"      "/dev/input/mice"
   Option      "Protocol"      "ExplorerPS/2"
   Option      "ZAxisMapping"      "4 5"
   Option      "Emulate3Buttons"   "true"
EndSection

Section "InputDevice"
   Identifier   "Synaptics Touchpad"
   Driver      "synaptics"
   Option      "SendCoreEvents"   "true"
   Option      "Device"      "/dev/psaux"
   Option      "Protocol"      "auto-dev"
   Option      "HorizScrollDelta"   "0"
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "stylus"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "stylus"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "eraser"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "eraser"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"
  Driver        "wacom"
  Identifier    "cursor"
  Option        "Device"        "/dev/wacom"          # Change to
                                                      # /dev/input/event
                                                      # for USB
  Option        "Type"          "cursor"
  Option        "ForceDevice"   "ISDV4"               # Tablet PC ONLY
EndSection

Section "Device"
   Identifier   "Intel Corporation 82852/855GM Integrated Graphics Device"
   Driver      "i810"
   BusID      "PCI:0:2:0"
EndSection

Section "Monitor"
   Identifier   "Generic Monitor"
   Option      "DPMS"
   HorizSync   28-70
   VertRefresh   43-60
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Device      "Intel Corporation 82852/855GM Integrated Graphics Device"
   Monitor      "Generic Monitor"
   DefaultDepth   16
   SubSection "Display"
      Depth      1
      Modes      "1400x1050"
   EndSubSection
   SubSection "Display"
      Depth      4
      Modes      "1400x1050"
   EndSubSection
   SubSection "Display"
      Depth      8
      Modes      "1400x1050"
   EndSubSection
   SubSection "Display"
      Depth      15
      Modes      "1400x1050"
   EndSubSection
   SubSection "Display"
      Depth      16
      Modes      "1400x1050"
   EndSubSection
   SubSection "Display"
      Depth      24
      Modes      "1400x1050"
   EndSubSection
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
   InputDevice   "Generic Keyboard"
   InputDevice   "Configured Mouse"
   InputDevice     "stylus" "SendCoreEvents"
   InputDevice     "cursor" "SendCoreEvents"
   InputDevice     "eraser" "SendCoreEvents"
   InputDevice   "Synaptics Touchpad"
EndSection

Section "DRI"
   Mode   0666
EndSection

------------------------------------------------------------------------------

 

Provoz zaštiťuje spolek OpenAlt.