Monitor LG L1952S - out of range [vyřešeno]

[Gomez]

Dobry den,
mam problem s timto monitorem. Ten pri nabehnuti systemu zcerna a napíse tuto chybu: "out of range 74,9KHz/60Hz". Zkousel jsem nainstalovat ovladace fglrx podle zdejsi wiki a nastavit frekvence podle manualu monitoru do sekce monitor v /etc/X11/xorg.conf ,ale nic nepomohlo.
Poradí mi někdo co s tím???

Děkuji

[LS]

Rozliseni mate nastavene jake? Postele prosim cely xorg.conf.

[Gomez]

xorg.conf je:

Kód: [Vybrat]

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
Identifier     "Default Layout"
Screen      0  "aticonfig-Screen[0]" 0 0
InputDevice    "Generic Keyboard"
InputDevice    "Configured Mouse"
InputDevice    "stylus" "SendCoreEvents"
InputDevice    "cursor" "SendCoreEvents"
InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

# path to defoma fonts
FontPath     "/usr/share/fonts/X11/misc"
FontPath     "/usr/share/fonts/X11/cyrillic"
FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath     "/usr/share/fonts/X11/Type1"
FontPath     "/usr/share/fonts/X11/100dpi"
FontPath     "/usr/share/fonts/X11/75dpi"
FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
Load  "i2c"
Load  "bitmap"
Load  "ddc"
Load  "dri"
Load  "extmod"
Load  "freetype"
Load  "glx"
Load  "int10"
Load  "vbe"
EndSection

Section "InputDevice"
Identifier  "Generic Keyboard"
Driver      "kbd"
Option    "CoreKeyboard"
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc105"
Option    "XkbLayout" "cz"
Option    "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
Identifier  "Configured Mouse"
Driver      "mouse"
Option    "CorePointer"
Option    "Device" "/dev/input/mice"
Option    "Protocol" "ImPS/2"
Option    "ZAxisMapping" "4 5"
Option    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier  "stylus"
Driver      "wacom"
Option    "Device" "/dev/input/wacom"
Option    "Type" "stylus"
Option    "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier  "eraser"
Driver      "wacom"
Option    "Device" "/dev/input/wacom"
Option    "Type" "eraser"
Option    "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier  "cursor"
Driver      "wacom"
Option    "Device" "/dev/input/wacom"
Option    "Type" "cursor"
Option    "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
Identifier   "Obecný monitor"
HorizSync    30.0 - 83.0
VertRefresh  56.0 - 75.0
Option    "DPMS"
EndSection

Section "Monitor"
Identifier   "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection

Section "Device"
Identifier  "ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)]"
Driver      "ati"
BusID       "PCI:5:0:0"
EndSection

Section "Device"
Identifier  "aticonfig-Device[0]"
Driver      "fglrx"
EndSection

Section "Screen"
Identifier "Default Screen"
Device     "ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)]"
Monitor    "Obecný monitor"
DefaultDepth     24
SubSection "Display"
Depth     1
Modes    "2560x864" "1528x1528" "1184x1310" "1024x768" "800x600" "672x1824" "640x480" "632x632"
EndSubSection
SubSection "Display"
Depth     4
Modes    "2560x864" "1528x1528" "1184x1310" "1024x768" "800x600" "672x1824" "640x480" "632x632"
EndSubSection
SubSection "Display"
Depth     8
Modes    "2560x864" "1528x1528" "1184x1310" "1024x768" "800x600" "672x1824" "640x480" "632x632"
EndSubSection
SubSection "Display"
Depth     15
Modes    "2560x864" "1528x1528" "1184x1310" "1024x768" "800x600" "672x1824" "640x480" "632x632"
EndSubSection
SubSection "Display"
Depth     16
Modes    "2560x864" "1528x1528" "1184x1310" "1024x768" "800x600" "672x1824" "640x480" "632x632"
EndSubSection
SubSection "Display"
Depth     24
Modes    "2560x864" "1528x1528" "1184x1310" "1024x768" "800x600" "672x1824" "640x480" "632x632"
EndSubSection
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]"
Device     "aticonfig-Device[0]"
Monitor    "aticonfig-Monitor[0]"
DefaultDepth     24
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection

Section "DRI"
Mode         0666
EndSection

Section "Extensions"
Option "Composite" "Disable"
EndSection

[LS]

Cast Section "Screen" upravte takto:

Kód: [Vybrat]

Section "Screen"
    Identifier "Default Screen"
    Device     "ATI Technologies Inc R480 [Radeon X800 GTO (PCIE)]"
    Monitor    "Obecný monitor"
    DefaultDepth     24
    SubSection "Display"
        Depth     24
        Modes    "1024x768"
    EndSubSection
EndSectionmisto "1024x768" nastavte pozadovane rozliseni, ulozte a restartujte pocitac.

Nastaveni ovladace - Driver "ati" zkuste zmenit na Driver "radeon"

[Gomez]

zkousel jsem rozliseni 1280x1024 a 1024x768, nastaveni ovladace jsou ruzne kombinoval s rozlisenim...nicmene nic se nezmenilo a monitor stale vypisu tu samou chybovou hlasku

jeste jsem si vsimnul, ze kdyz zadam v recovery-modu prikaz "glxinfo |grep direct" vypise se dalsi chyba "Error: unable to open display(null)"...tak nevim jestli to ma s tim neco spolecneho.

[Jony]

V xorg.conf máš dvě sekce/dva monitory, zkus i u toho "autoconfigu" nacpat natvrdo ty H/V frekvence, třeba to pomůže =)... nebo připoj monitor na druhý výstup VGA karty (pokud to není tv-out)...

[zenith]

Měl jsem podobný problém s LG194WT po přidání nativního rozlišení monitoru 1440x900 do xorg.conf

Mě pomohlo nahrát zálohu xorg.conf, nabootovat s ní, přidat nativní rozlišení (Ve vašem případě 1280 x 1024), restart, změna rozlišení v nastavení a restart. Možná je moje rada jen čeření vody, ale třeba pomůže.

[Gomez]

Tak nakonec se mi to podarilo vyresit kombinaci vasich rad:

1)nahral jsem zpet original souboru xorg.conf
2)nastavil jsem pozadovane frekvence v sekci monitor
3)nastavil jsem pozadovane rozliseni v sekci screen
4)jako ovladac v sekci device jsem nastavil fglrx

vsem vam moc dekuji za vase rady a vas cas

[Jony]

Tak si to dobře zapamatuj, příště můžeš poradit Ty =)