Kdyby mi byl někdo ochoten pomoct přikládám DMESG z Ubuntu 6.10 amd64, kde mi tuner funguje až na zvuk (vidím obraz v kaffeine)
[ 0.000000] Bootdata ok (command line is BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --)
[ 0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f9280
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff3040
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff30c0
[ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9680
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff95c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fff0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000
[ 0.000000] On node 0 totalpages: 515656
[ 0.000000] DMA zone: 2591 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:7 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ 82000000 size 32 MB
[ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
[ 0.000000] No AGP bridge found
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 0.000000] time.c: Detected 1809.292 MHz processor.
[ 44.137654] Console: colour VGA+ 80x25
[ 44.138824] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 44.140578] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 44.161106] Memory: 2053116k/2097088k available (2129k kernel code, 43584k reserved, 1424k data, 188k init)
[ 44.238325] Calibrating delay using timer specific routine.. 3620.79 BogoMIPS (lpj=7241593)
[ 44.238380] Security Framework v1.0.0 initialized
[ 44.238386] SELinux: Disabled at boot.
[ 44.238407] Mount-cache hash table entries: 256
[ 44.238540] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 44.238544] CPU: L2 Cache: 1024K (64 bytes/line)
[ 44.238547] CPU 0/0(1) -> Node 0 -> Core 0
[ 44.238562] SMP alternatives: switching to UP code
[ 44.238803] checking if image is initramfs... it is
[ 44.814513] Freeing initrd memory: 6259k freed
[ 44.818350] ACPI: Core revision 20060707
[ 44.820681] ACPI: Looking for DSDT ... not found!
[ 44.865289] Using local APIC timer interrupts.
[ 44.920468] result 12564534
[ 44.920470] Detected 12.564 MHz APIC timer.
[ 44.921232] Brought up 1 CPUs
[ 44.921259] testing NMI watchdog ... OK.
[ 44.961258] migration_cost=0
[ 44.961479] NET: Registered protocol family 16
[ 44.961503] ACPI: bus type pci registered
[ 44.965209] PCI: Using MMCONFIG at e0000000
[ 44.965229] PCI: No mmconfig possible on device 0:18
[ 44.972966] ACPI: Interpreter enabled
[ 44.972968] ACPI: Using IOAPIC for interrupt routing
[ 44.973523] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 44.973527] PCI: Probing PCI hardware (bus 00)
[ 44.979767] PCI: Ignoring BAR0-3 of IDE controller 0000:00:06.0
[ 44.980101] PCI: Transparent bridge - 0000:00:09.0
[ 44.980282] Boot video device is 0000:05:00.0
[ 44.980337] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 45.060244] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 45.062409] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 45.062806] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 45.063198] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 45.063590] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 45.063980] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 45.064372] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 45.064765] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 45.065166] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 45.065558] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 45.065951] ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 45.066343] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 45.066737] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 45.067129] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 45.067533] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 45.067940] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 45.068345] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 45.068788] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 45.069246] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 45.069682] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 45.070118] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 45.070455] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 45.070912] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 45.071364] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 45.071817] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 45.072268] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 45.072721] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 45.073178] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 45.073631] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 45.074086] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 45.074550] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 45.075013] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 45.075477] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 45.078456] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 45.078467] pnp: PnP ACPI init
[ 45.086293] pnp: PnP ACPI: found 12 devices
[ 45.086335] PCI: Using ACPI for IRQ routing
[ 45.086340] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 45.086442] PCI-DMA: Disabling IOMMU.
[ 45.086864] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[ 45.086868] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[ 45.086872] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
[ 45.086875] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
[ 45.086879] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
[ 45.086882] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
[ 45.087053] PCI: Bridge: 0000:00:09.0
[ 45.087056] IO window: a000-afff
[ 45.087059] MEM window: fa000000-fcffffff
[ 45.087062] PREFETCH window: fdf00000-fdffffff
[ 45.087065] PCI: Bridge: 0000:00:0b.0
[ 45.087067] IO window: 9000-9fff
[ 45.087070] MEM window: fde00000-fdefffff
[ 45.087073] PREFETCH window: fdd00000-fddfffff
[ 45.087076] PCI: Bridge: 0000:00:0c.0
[ 45.087078] IO window: 8000-8fff
[ 45.087081] MEM window: fdc00000-fdcfffff
[ 45.087084] PREFETCH window: fdb00000-fdbfffff
[ 45.087087] PCI: Bridge: 0000:00:0d.0
[ 45.087089] IO window: 7000-7fff
[ 45.087092] MEM window: fda00000-fdafffff
[ 45.087095] PREFETCH window: fd900000-fd9fffff
[ 45.087100] PCI: Bridge: 0000:00:0e.0
[ 45.087102] IO window: 6000-6fff
[ 45.087105] MEM window: f7000000-f9ffffff
[ 45.087108] PREFETCH window: d0000000-dfffffff
[ 45.087114] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 45.087120] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 45.087125] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 45.087130] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 45.087134] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 45.087170] NET: Registered protocol family 2
[ 45.124896] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 45.125285] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 45.127898] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 45.128555] TCP: Hash tables configured (established 262144 bind 65536)
[ 45.128558] TCP reno registered
[ 45.128905] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 45.129234] audit: initializing netlink socket (disabled)
[ 45.129243] audit(1178431145.000:1): initialized
[ 45.129384] VFS: Disk quotas dquot_6.5.1
[ 45.129402] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 45.129445] Initializing Cryptographic API
[ 45.129449] io scheduler noop registered
[ 45.129455] io scheduler anticipatory registered
[ 45.129464] io scheduler deadline registered
[ 45.129479] io scheduler cfq registered (default)
[ 45.130099] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 45.130104] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 45.130117] assign_interrupt_mode Found MSI capability
[ 45.130146] Allocate Port Service[0000:00:0b.0:pcie00]
[ 45.130183] Allocate Port Service[0000:00:0b.0:pcie03]
[ 45.130213] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 45.130216] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 45.130228] assign_interrupt_mode Found MSI capability
[ 45.130244] Allocate Port Service[0000:00:0c.0:pcie00]
[ 45.130269] Allocate Port Service[0000:00:0c.0:pcie03]
[ 45.130298] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 45.130301] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 45.130313] assign_interrupt_mode Found MSI capability
[ 45.130328] Allocate Port Service[0000:00:0d.0:pcie00]
[ 45.130356] Allocate Port Service[0000:00:0d.0:pcie03]
[ 45.130385] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 45.130388] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
[ 45.130400] assign_interrupt_mode Found MSI capability
[ 45.130415] Allocate Port Service[0000:00:0e.0:pcie00]
[ 45.130441] Allocate Port Service[0000:00:0e.0:pcie03]
[ 45.150636] Real Time Clock Driver v1.12ac
[ 45.150674] Linux agpgart interface v0.101 (c) Dave Jones
[ 45.150677] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 45.150781] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 45.151244] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 45.151400] mice: PS/2 mouse device common for all mice
[ 45.151879] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[ 45.152056] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 45.152059] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 45.152239] PNP: No PS/2 controller found. Probing ports directly.
[ 45.168676] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 45.168896] TCP bic registered
[ 45.168904] NET: Registered protocol family 1
[ 45.168909] NET: Registered protocol family 8
[ 45.168911] NET: Registered protocol family 20
[ 45.170574] ACPI: (supports S0 S1 S4 S5)
[ 45.170622] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 45.170642] Freeing unused kernel memory: 188k freed
[ 45.602356] input: AT Translated Set 2 keyboard as /class/input/input0
[ 45.645579] vga16fb: initializing
[ 45.645585] vga16fb: mapped to 0xffff8100000a0000
[ 45.782534] Console: switching to colour frame buffer device 80x25
[ 45.782539] fb0: VGA16 VGA frame buffer device
[ 46.819989] Capability LSM initialized
[ 46.847196] ACPI: Fan [FAN] (on)
[ 46.850265] ACPI Exception (acpi_processor-0693): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 46.850270] ACPI: Getting cpuindex for acpiid 0x1
[ 46.851304] ACPI: Thermal Zone [THRM] (22 C)
[ 47.151627] SCSI subsystem initialized
[ 47.155318] libata version 1.20 loaded.
[ 47.156358] sata_nv 0000:00:07.0: version 0.8
[ 47.156946] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 47.156952] GSI 16 sharing vector 0xD9 and IRQ 16
[ 47.156957] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217
[ 47.157154] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 47.157221] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 217
[ 47.157238] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 217
[ 47.361013] ata1: SATA link up 3.0 Gbps (SStatus 123)
[ 47.528816] ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
[ 47.528820] ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
[ 47.529073] nv_sata: Primary device added
[ 47.529075] nv_sata: Primary device removed
[ 47.529077] nv_sata: Secondary device added
[ 47.529079] nv_sata: Secondary device removed
[ 47.540792] ata1: dev 0 configured for UDMA/133
[ 47.540795] scsi0 : sata_nv
[ 47.748348] ata2: SATA link up 3.0 Gbps (SStatus 123)
[ 47.916150] ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
[ 47.916154] ata2: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
[ 47.916391] nv_sata: Primary device added
[ 47.916393] nv_sata: Primary device removed
[ 47.916395] nv_sata: Secondary device added
[ 47.916396] nv_sata: Secondary device removed
[ 47.928129] ata2: dev 0 configured for UDMA/133
[ 47.928131] scsi1 : sata_nv
[ 47.928588] Vendor: ATA Model: ST3250620AS Rev: 3.AA
[ 47.928596] Type: Direct-Access ANSI SCSI revision: 05
[ 47.933818] Vendor: ATA Model: ST3250620AS Rev: 3.AA
[ 47.933827] Type: Direct-Access ANSI SCSI revision: 05
[ 47.934455] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 47.934461] GSI 17 sharing vector 0xE1 and IRQ 17
[ 47.934466] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225
[ 47.934643] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 47.934691] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 225
[ 47.934707] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 225
[ 47.937493] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 47.937504] sda: Write Protect is off
[ 47.937507] sda: Mode Sense: 00 3a 00 00
[ 47.937519] SCSI device sda: drive cache: write back
[ 47.937563] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 47.937571] sda: Write Protect is off
[ 47.937573] sda: Mode Sense: 00 3a 00 00
[ 47.937585] SCSI device sda: drive cache: write back
[ 47.937590] sda: sda1 sda2 < sda5 >
[ 47.970506] sd 0:0:0:0: Attached scsi disk sda
[ 47.971076] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 47.971672] sdb: Write Protect is off
[ 47.971674] sdb: Mode Sense: 00 3a 00 00
[ 47.971691] SCSI device sdb: drive cache: write back
[ 47.971732] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 47.971740] sdb: Write Protect is off
[ 47.971742] sdb: Mode Sense: 00 3a 00 00
[ 47.971754] SCSI device sdb: drive cache: write back
[ 47.971757] sdb: sdb1 sdb2 < sdb5 >
[ 47.992321] sd 1:0:0:0: Attached scsi disk sdb
[ 48.139682] ata3: SATA link up 3.0 Gbps (SStatus 123)
[ 48.303490] ata3: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f
[ 48.303494] ata3: dev 0 ATA-7, max UDMA/133, 312581808 sectors: LBA48
[ 48.303584] nv_sata: Primary device added
[ 48.303586] nv_sata: Primary device removed
[ 48.303588] nv_sata: Secondary device added
[ 48.303590] nv_sata: Secondary device removed
[ 48.315466] ata3: dev 0 configured for UDMA/133
[ 48.315469] scsi2 : sata_nv
[ 48.519029] ata4: SATA link up 1.5 Gbps (SStatus 113)
[ 48.686569] ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
[ 48.686572] ata4: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
[ 48.686815] nv_sata: Primary device added
[ 48.686817] nv_sata: Primary device removed
[ 48.686818] nv_sata: Secondary device added
[ 48.686820] nv_sata: Secondary device removed
[ 48.698809] ata4: dev 0 configured for UDMA/133
[ 48.698812] scsi3 : sata_nv
[ 48.699251] Vendor: ATA Model: WDC WD1600JS-22N Rev: 10.0
[ 48.699259] Type: Direct-Access ANSI SCSI revision: 05
[ 48.699657] SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
[ 48.699667] sdc: Write Protect is off
[ 48.699669] sdc: Mode Sense: 00 3a 00 00
[ 48.699681] SCSI device sdc: drive cache: write back
[ 48.699720] SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
[ 48.699728] sdc: Write Protect is off
[ 48.699730] sdc: Mode Sense: 00 3a 00 00
[ 48.699742] SCSI device sdc: drive cache: write back
[ 48.699746] sdc:<4>nv_sata: Primary device added
[ 48.707643] nv_sata: Primary device removed
[ 48.707645] nv_sata: Secondary device added
[ 48.707647] nv_sata: Secondary device removed
[ 48.707660] sdc1 sdc2 <<4>nv_sata: Primary device added
[ 48.720946] nv_sata: Primary device removed
[ 48.720948] nv_sata: Secondary device added
[ 48.720950] nv_sata: Secondary device removed
[ 48.720956] sdc5<4>nv_sata: Primary device added
[ 48.730887] nv_sata: Primary device removed
[ 48.730889] nv_sata: Secondary device added
[ 48.730890] nv_sata: Secondary device removed
[ 48.730896] sdc6 >
[ 48.730974] sd 2:0:0:0: Attached scsi disk sdc
[ 48.731485] Vendor: ATA Model: ST3250620AS Rev: 3.AA
[ 48.731492] Type: Direct-Access ANSI SCSI revision: 05
[ 48.731917] SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
[ 48.731926] sdd: Write Protect is off
[ 48.731928] sdd: Mode Sense: 00 3a 00 00
[ 48.731940] SCSI device sdd: drive cache: write back
[ 48.731974] SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
[ 48.731982] sdd: Write Protect is off
[ 48.731984] sdd: Mode Sense: 00 3a 00 00
[ 48.731997] SCSI device sdd: drive cache: write back
[ 48.732000] sdd:<4>nv_sata: Primary device added
[ 48.736750] nv_sata: Primary device removed
[ 48.736752] nv_sata: Secondary device added
[ 48.736754] nv_sata: Secondary device removed
[ 48.736765] sdd1 sdd2 <<4>nv_sata: Primary device added
[ 48.750486] nv_sata: Primary device removed
[ 48.750488] nv_sata: Secondary device added
[ 48.750490] nv_sata: Secondary device removed
[ 48.750496] sdd5 >
[ 48.750552] sd 3:0:0:0: Attached scsi disk sdd
[ 48.751411] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[ 48.751426] NFORCE-CK804: chipset revision 242
[ 48.751429] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 48.751433] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[ 48.751441] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[ 48.751450] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[ 48.751457] Probing IDE interface ide0...
[ 49.325652] Probing IDE interface ide1...
[ 50.068453] hdc: HL-DT-STDVD-RAM GSA-H20L, ATAPI CD/DVD-ROM drive
[ 50.404408] ide1 at 0x170-0x177,0x376 on irq 15
[ 50.416204] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 50.416211] Uniform CD-ROM driver Revision: 3.20
[ 54.544803] Probing IDE interface ide0...
[ 54.579708] usbcore: registered new driver usbfs
[ 54.579730] usbcore: registered new driver hub
[ 54.580454] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 54.580935] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 54.580941] GSI 18 sharing vector 0xE9 and IRQ 18
[ 54.580946] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, low) -> IRQ 233
[ 54.581145] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 54.581150] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 54.581269] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 54.612626] ohci_hcd 0000:00:02.0: irq 233, io mem 0xfe02f000
[ 54.659812] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
[ 54.680572] ieee1394: Initialized config rom entry `ip1394'
[ 54.685278] usb usb1: configuration #1 chosen from 1 choice
[ 54.685375] hub 1-0:1.0: USB hub found
[ 54.685384] hub 1-0:1.0: 10 ports detected
[ 54.804452] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[ 54.804459] GSI 19 sharing vector 0x32 and IRQ 19
[ 54.804464] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 50
[ 54.804623] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 54.804628] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 54.804843] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 54.804871] ehci_hcd 0000:00:02.1: debug port 1
[ 54.804875] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 54.804885] ehci_hcd 0000:00:02.1: irq 50, io mem 0xfeb00000
[ 54.804891] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 54.805023] usb usb2: configuration #1 chosen from 1 choice
[ 54.805126] hub 2-0:1.0: USB hub found
[ 54.805134] hub 2-0:1.0: 10 ports detected
[ 54.924202] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 54.924206] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 217
[ 54.924212] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 54.924221] forcedeth: using HIGHDMA
[ 55.451474] eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0
[ 55.452264] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 55.452270] GSI 20 sharing vector 0x3A and IRQ 20
[ 55.452274] ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 58
[ 55.452279] PCI: Via IRQ fixup for 0000:01:0c.0, from 11 to 10
[ 55.509336] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[58] MMIO=[fcfff000-fcfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 55.774605] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 56.797441] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00009de413]
[ 63.520410] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 63.520415] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 63.520418] ide: failed opcode was: unknown
[ 63.520421] end_request: I/O error, dev hdc, sector 1414440
[ 63.520425] Buffer I/O error on device hdc, logical block 353610
[ 63.977030] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 63.977034] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 63.977036] ide: failed opcode was: unknown
[ 63.977039] end_request: I/O error, dev hdc, sector 1414440
[ 63.977041] Buffer I/O error on device hdc, logical block 353610
[ 64.432418] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 64.432422] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 64.432424] ide: failed opcode was: unknown
[ 64.432427] end_request: I/O error, dev hdc, sector 1414440
[ 64.432430] Buffer I/O error on device hdc, logical block 353610
[ 64.886410] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 64.886413] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 64.886416] ide: failed opcode was: unknown
[ 64.886418] end_request: I/O error, dev hdc, sector 1414440
[ 64.886421] Buffer I/O error on device hdc, logical block 353610
[ 65.339093] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 65.339097] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 65.339099] ide: failed opcode was: unknown
[ 65.339101] end_request: I/O error, dev hdc, sector 1414440
[ 65.339104] Buffer I/O error on device hdc, logical block 353610
[ 65.791078] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 65.791082] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 65.791084] ide: failed opcode was: unknown
[ 65.791086] end_request: I/O error, dev hdc, sector 1414440
[ 65.791089] Buffer I/O error on device hdc, logical block 353610
[ 65.966119] usb 1-2: configuration #1 chosen from 1 choice
[ 66.272981] usb 1-8: new full speed USB device using ohci_hcd and address 3
[ 66.484710] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 66.484715] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 66.484718] ide: failed opcode was: unknown
[ 66.484721] end_request: I/O error, dev hdc, sector 1414440
[ 66.484724] Buffer I/O error on device hdc, logical block 353610
[ 66.486252] usb 1-8: configuration #1 chosen from 1 choice
[ 66.500161] usbcore: registered new driver hiddev
[ 66.511302] input: Logitech USB Receiver as /class/input/input1
[ 66.511311] input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-8
[ 66.521260] input: Logitech USB Receiver as /class/input/input2
[ 66.521456] input,hiddev96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-8
[ 66.521466] usbcore: registered new driver usbhid
[ 66.521469] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 66.935553] hdc: command error: status=0x51 { DriveReady SeekComplete Error }
[ 66.935559] hdc: command error: error=0x50 { LastFailedSense=0x05 }
[ 66.935562] ide: failed opcode was: unknown
[ 66.935565] end_request: I/O error, dev hdc, sector 1414440
[ 66.935570] Buffer I/O error on device hdc, logical block 353610
[ 72.426444] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 72.462096] ISO 9660 Extensions: RRIP_1991A
[ 72.493568] Registering unionfs 1.1.4
[ 72.498772] loop: loaded (max 8 devices)
[ 72.625431] squashfs: version 3.0 (2006/03/15) Phillip Lougher
[ 116.461521] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 116.499434] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 116.628464] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 116.630088] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 116.958800] input: PC Speaker as /class/input/input3
[ 117.249233] FDC 0 is a post-1991 82077
[ 117.706972] parport: PnPBIOS parport detected.
[ 117.707018] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 117.769114] Linux video capture interface: v1.00
[ 118.334818] gameport: EMU10K1 is pci0000:01:09.1/gameport0, io 0xa800, speed 1197kHz
[ 119.332166] cx2388x v4l2 driver version 0.0.5 loaded
[ 119.332538] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 119.332543] GSI 21 sharing vector 0x42 and IRQ 21
[ 119.332549] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 66
[ 119.332589] CORE cx88[0]: subsystem: 107d:665f, board: WinFast DTV1000-T [card=35,autodetected]
[ 119.332593] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
[ 119.571559] Bluetooth: Core ver 2.8
[ 119.571563] NET: Registered protocol family 31
[ 119.571565] Bluetooth: HCI device and connection manager initialized
[ 119.571578] Bluetooth: HCI socket layer initialized
[ 119.574035] Bluetooth: HCI USB driver ver 2.9
[ 119.576089] usbcore: registered new driver hci_usb
[ 119.603072] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 66, latency: 32, mmio: 0xfa000000
[ 119.603209] cx88[0]/0: registered device video0 [v4l2]
[ 119.603236] cx88[0]/0: registered device vbi0
[ 119.641296] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 119.641328] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 119.641356] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 119.641384] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 120.012469] cx2388x dvb driver version 0.0.5 loaded
[ 120.012520] ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 66
[ 120.012529] cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 66, latency: 32, mmio: 0xfb000000
[ 120.012537] cx88[0]/2: cx2388x based dvb card
[ 120.014374] DVB: registering new adapter (cx88[0]).
[ 120.014378] DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
[ 120.023325] cx2388x blackbird driver version 0.0.5 loaded
[ 120.034708] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 58
[ 120.175979] ts: Compaq touchscreen protocol output
[ 121.032316] NET: Registered protocol family 17
[ 123.036357] NET: Registered protocol family 10
[ 123.036453] lo: Disabled Privacy Extensions
[ 123.036795] IPv6 over IPv4 tunneling driver
[ 131.921596] ACPI: Power Button (FF) [PWRF]
[ 131.921606] ACPI: Power Button (CM) [PWRB]
[ 132.144103] ibm_acpi: ec object not found
[ 132.166259] pcc_acpi: loading...
[ 133.406561] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.2)
[ 133.410831] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 133.713482] eth0: no IPv6 routers present
[ 139.570085] lp0: using parport0 (interrupt-driven).
[ 139.625489] ppdev: user-space parallel port driver
[ 224.481391] Bluetooth: L2CAP ver 2.8
[ 224.481395] Bluetooth: L2CAP socket layer initialized
[ 231.723739] Bluetooth: RFCOMM socket layer initialized
[ 231.723757] Bluetooth: RFCOMM TTY layer initialized
[ 231.723759] Bluetooth: RFCOMM ver 1.7
A DMESG z Ubuntu 7.04 Amd64, kde mi kaffeine nedetekuje vůbec tuner
[ 0.000000] Linux version 2.6.20-15-generic (root@yellow) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 06:17:24 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] Command line: root=UUID=8c571885-6c47-4973-82f5-a2f8e6b1ab5d ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f9280
[ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff3040
[ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff30c0
[ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9680
[ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff95c0
[ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fff0000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524272
[ 0.000000] On node 0 totalpages: 524175
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1086 pages reserved
[ 0.000000] DMA zone: 2857 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000f0000
[ 0.000000] Nosave address range: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515922
[ 0.000000] Kernel command line: root=UUID=8c571885-6c47-4973-82f5-a2f8e6b1ab5d ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 26.179674] Console: colour VGA+ 80x25
[ 26.180855] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 26.182609] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 26.182832] Checking aperture...
[ 26.182836] CPU 0: aperture @ 82000000 size 32 MB
[ 26.182838] Aperture too small (32 MB)
[ 26.187983] No AGP bridge found
[ 26.208567] Memory: 2053600k/2097088k available (2217k kernel code, 43100k reserved, 1162k data, 304k init)
[ 26.288308] Calibrating delay using timer specific routine.. 3620.79 BogoMIPS (lpj=7241589)
[ 26.288365] Security Framework v1.0.0 initialized
[ 26.288370] SELinux: Disabled at boot.
[ 26.288395] Mount-cache hash table entries: 256
[ 26.288536] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 26.288539] CPU: L2 Cache: 1024K (64 bytes/line)
[ 26.288542] CPU 0/0 -> Node 0
[ 26.288561] SMP alternatives: switching to UP code
[ 26.288842] Early unpacking initramfs... done
[ 26.627177] ACPI: Core revision 20060707
[ 26.629513] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 26.674058] Using local APIC timer interrupts.
[ 26.729237] result 12564537
[ 26.729239] Detected 12.564 MHz APIC timer.
[ 26.731605] Brought up 1 CPUs
[ 26.731645] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 26.731648] time.c: Detected 1809.292 MHz processor.
[ 26.731910] Time: 6:40:13 Date: 04/06/107
[ 26.731944] NET: Registered protocol family 16
[ 26.732021] ACPI: bus type pci registered
[ 26.732027] PCI: Using configuration type 1
[ 26.739827] ACPI: Interpreter enabled
[ 26.739830] ACPI: Using IOAPIC for interrupt routing
[ 26.740373] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 26.740379] PCI: Probing PCI hardware (bus 00)
[ 26.743160] PCI: Transparent bridge - 0000:00:09.0
[ 26.743369] Boot video device is 0000:05:00.0
[ 26.743430] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 26.822038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 26.824290] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.824677] ACPI: PCI Interrupt Link [LNK2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 26.825064] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 26.825450] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 26.825835] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.826222] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 26.826606] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.826992] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 26.827376] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 26.827770] ACPI: PCI Interrupt Link [LMCI] (IRQs *3 4 5 7 9 10 11 12 14 15)
[ 26.828156] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 26.828546] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 26.828930] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.829328] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 26.829727] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 26.830126] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 26.830567] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 26.831002] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 26.831437] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 26.831871] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 26.832202] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 26.832652] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 26.833099] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 26.833550] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
[ 26.833996] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 26.834445] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 26.834892] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 26.835340] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 26.835807] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 26.836265] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
[ 26.836725] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
[ 26.837182] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[ 26.840098] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 26.840107] pnp: PnP ACPI init
[ 26.847735] pnp: PnP ACPI: found 12 devices
[ 26.847781] PCI: Using ACPI for IRQ routing
[ 26.847785] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 26.847849] NET: Registered protocol family 8
[ 26.847851] NET: Registered protocol family 20
[ 26.848324] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[ 26.848328] pnp: 00:01: ioport range 0x4080-0x40ff has been reserved
[ 26.848331] pnp: 00:01: ioport range 0x4400-0x447f has been reserved
[ 26.848334] pnp: 00:01: ioport range 0x4480-0x44ff could not be reserved
[ 26.848337] pnp: 00:01: ioport range 0x4800-0x487f has been reserved
[ 26.848341] pnp: 00:01: ioport range 0x4880-0x48ff has been reserved
[ 26.848597] PCI: Bridge: 0000:00:09.0
[ 26.848599] IO window: a000-afff
[ 26.848603] MEM window: fa000000-fcffffff
[ 26.848606] PREFETCH window: fdf00000-fdffffff
[ 26.848609] PCI: Bridge: 0000:00:0b.0
[ 26.848611] IO window: 9000-9fff
[ 26.848614] MEM window: fde00000-fdefffff
[ 26.848617] PREFETCH window: fdd00000-fddfffff
[ 26.848619] PCI: Bridge: 0000:00:0c.0
[ 26.848622] IO window: 8000-8fff
[ 26.848625] MEM window: fdc00000-fdcfffff
[ 26.848628] PREFETCH window: fdb00000-fdbfffff
[ 26.848630] PCI: Bridge: 0000:00:0d.0
[ 26.848632] IO window: 7000-7fff
[ 26.848636] MEM window: fda00000-fdafffff
[ 26.848639] PREFETCH window: fd900000-fd9fffff
[ 26.848643] PCI: Bridge: 0000:00:0e.0
[ 26.848645] IO window: 6000-6fff
[ 26.848648] MEM window: f7000000-f9ffffff
[ 26.848651] PREFETCH window: d0000000-dfffffff
[ 26.848658] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 26.848665] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 26.848671] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 26.848676] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 26.848682] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 26.848719] NET: Registered protocol family 2
[ 26.887366] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 26.887745] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 26.890173] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 26.890781] TCP: Hash tables configured (established 262144 bind 65536)
[ 26.890784] TCP reno registered
[ 26.899417] checking if image is initramfs... it is
[ 27.534537] Freeing initrd memory: 6828k freed
[ 27.539173] audit: initializing netlink socket (disabled)
[ 27.539184] audit(1178433613.316:1): initialized
[ 27.539317] VFS: Disk quotas dquot_6.5.1
[ 27.539334] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 27.539376] io scheduler noop registered
[ 27.539378] io scheduler anticipatory registered
[ 27.539380] io scheduler deadline registered
[ 27.539391] io scheduler cfq registered (default)
[ 27.558176] PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
[ 27.558183] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 27.558190] PCI: Found disabled HT MSI Mapping on 0000:00:0c.0
[ 27.558197] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 27.558203] PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
[ 27.558210] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 27.558216] PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
[ 27.558223] PCI: Found enabled HT MSI Mapping on 0000:00:00.0
[ 27.558393] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 27.558412] assign_interrupt_mode Found MSI capability
[ 27.558416] Allocate Port Service[0000:00:0b.0:pcie00]
[ 27.558473] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 27.558492] assign_interrupt_mode Found MSI capability
[ 27.558494] Allocate Port Service[0000:00:0c.0:pcie00]
[ 27.558551] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 27.558569] assign_interrupt_mode Found MSI capability
[ 27.558572] Allocate Port Service[0000:00:0d.0:pcie00]
[ 27.558625] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 27.558643] assign_interrupt_mode Found MSI capability
[ 27.558645] Allocate Port Service[0000:00:0e.0:pcie00]
[ 27.580972] Real Time Clock Driver v1.12ac
[ 27.581012] Linux agpgart interface v0.102 (c) Dave Jones
[ 27.581015] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 27.581122] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.581610] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 27.581775] mice: PS/2 mouse device common for all mice
[ 27.582317] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 27.582516] input: Macintosh mouse button emulation as /class/input/input0
[ 27.582546] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 27.582550] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 27.582728] PNP: No PS/2 controller found. Probing ports directly.
[ 27.589961] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 27.589966] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 27.590047] TCP cubic registered
[ 27.590055] NET: Registered protocol family 1
[ 27.590181] ACPI: (supports S0 S1 S4 S5)
[ 27.590229] Magic number: 7:210:670
[ 27.590335] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 27.590405] Freeing unused kernel memory: 304k freed
[ 28.778576] Capability LSM initialized
[ 28.810423] ACPI: Fan [FAN] (on)
[ 28.813296] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[ 28.814302] ACPI: Thermal Zone [THRM] (22 C)
[ 29.265333] usbcore: registered new interface driver usbfs
[ 29.265353] usbcore: registered new interface driver hub
[ 29.265374] usbcore: registered new device driver usb
[ 29.266063] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 29.266529] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 29.266537] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
[ 29.266551] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 29.266554] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 29.266684] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 29.266700] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 29.303239] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
[ 29.357759] usb usb1: configuration #1 chosen from 1 choice
[ 29.357784] hub 1-0:1.0: USB hub found
[ 29.357793] hub 1-0:1.0: 10 ports detected
[ 29.370558] ieee1394: Initialized config rom entry `ip1394'
[ 29.463536] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 29.463545] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
[ 29.463558] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 29.463561] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 29.463584] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 29.463613] ehci_hcd 0000:00:02.1: debug port 1
[ 29.463616] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 29.463626] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000
[ 29.463632] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 29.463698] usb usb2: configuration #1 chosen from 1 choice
[ 29.463720] hub 2-0:1.0: USB hub found
[ 29.463727] hub 2-0:1.0: 10 ports detected
[ 29.526361] FDC 0 is a post-1991 82077
[ 29.571340] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
[ 29.571359] NFORCE-CK804: chipset revision 242
[ 29.571361] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 29.571367] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
[ 29.571374] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
[ 29.571382] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
[ 29.571390] Probing IDE interface ide0...
[ 30.141737] Probing IDE interface ide1...
[ 30.425250] usb 1-2: new full speed USB device using ohci_hcd and address 2
[ 30.880551] hdc: HL-DT-STDVD-RAM GSA-H20L, ATAPI CD/DVD-ROM drive
[ 31.216460] ide1 at 0x170-0x177,0x376 on irq 15
[ 31.226057] SCSI subsystem initialized
[ 31.232496] libata version 2.20 loaded.
[ 31.238169] sata_nv 0000:00:07.0: version 3.3
[ 31.238740] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 31.238748] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
[ 31.238759] sata_nv 0000:00:07.0: Using ADMA mode
[ 31.238772] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 31.238843] ata1: SATA max UDMA/133 cmd 0xffffc2000002e480 ctl 0xffffc2000002e4a0 bmdma 0x000000000001cc00 irq 21
[ 31.238887] ata2: SATA max UDMA/133 cmd 0xffffc2000002e580 ctl 0xffffc2000002e5a0 bmdma 0x000000000001cc08 irq 21
[ 31.238899] scsi0 : sata_nv
[ 31.707109] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 31.758432] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 31.758438] ata1.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 31.758441] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 31.824959] ata1.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 31.824964] ata1.00: configured for UDMA/133
[ 31.824972] scsi1 : sata_nv
[ 32.294124] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.342187] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 32.342192] ata2.00: ATA-7: ST3250620AS, 3.AAE, max UDMA/133
[ 32.342195] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 32.408707] ata2.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 32.408711] ata2.00: configured for UDMA/133
[ 32.408791] scsi 0:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 32.408799] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 32.409351] scsi 1:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 32.409357] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 32.410362] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 32.410370] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
[ 32.410381] sata_nv 0000:00:08.0: Using ADMA mode
[ 32.410395] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 32.410450] ata3: SATA max UDMA/133 cmd 0xffffc20000030480 ctl 0xffffc200000304a0 bmdma 0x000000000001b800 irq 20
[ 32.410491] ata4: SATA max UDMA/133 cmd 0xffffc20000030580 ctl 0xffffc200000305a0 bmdma 0x000000000001b808 irq 20
[ 32.410501] scsi2 : sata_nv
[ 32.881142] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.889282] ata3.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 32.889287] ata3.00: ATA-7: WDC WD1600JS-22NCB1, 10.02E02, max UDMA/133
[ 32.889290] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 32.901257] ata3.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 32.901261] ata3.00: configured for UDMA/133
[ 32.901267] scsi3 : sata_nv
[ 33.372319] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 33.423920] ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 33.423925] ata4.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133
[ 33.423928] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 33.490438] ata4.00: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168
[ 33.490442] ata4.00: configured for UDMA/133
[ 33.490516] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-22N 10.0 PQ: 0 ANSI: 5
[ 33.490523] ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 33.491075] scsi 3:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 33.491080] ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 33.493144] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 33.493147] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 23 (level, low) -> IRQ 23
[ 33.493153] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 33.493161] forcedeth: using HIGHDMA
[ 33.505419] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 33.505427] Uniform CD-ROM driver Revision: 3.20
[ 33.524083] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 33.524368] sda: Write Protect is off
[ 33.524370] sda: Mode Sense: 00 3a 00 00
[ 33.526326] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.527262] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[ 33.527633] sda: Write Protect is off
[ 33.527636] sda: Mode Sense: 00 3a 00 00
[ 33.527826] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.527831] sda: sda1 sda2 < sda5 >
[ 33.568498] sd 0:0:0:0: Attached scsi disk sda
[ 33.569141] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 33.569153] sdb: Write Protect is off
[ 33.569155] sdb: Mode Sense: 00 3a 00 00
[ 33.569170] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.569208] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
[ 33.569216] sdb: Write Protect is off
[ 33.569219] sdb: Mode Sense: 00 3a 00 00
[ 33.569233] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.569236] sdb: sdb1 sdb2 < sdb5 >
[ 33.603694] sd 1:0:0:0: Attached scsi disk sdb
[ 33.604340] SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
[ 33.604349] sdc: Write Protect is off
[ 33.604352] sdc: Mode Sense: 00 3a 00 00
[ 33.604365] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.604398] SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
[ 33.604406] sdc: Write Protect is off
[ 33.604408] sdc: Mode Sense: 00 3a 00 00
[ 33.604421] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.604424] sdc: sdc1 sdc2 < sdc5 sdc6 >
[ 33.642948] sd 2:0:0:0: Attached scsi disk sdc
[ 33.643750] SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
[ 33.643759] sdd: Write Protect is off
[ 33.643761] sdd: Mode Sense: 00 3a 00 00
[ 33.643775] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.643809] SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
[ 33.643817] sdd: Write Protect is off
[ 33.643819] sdd: Mode Sense: 00 3a 00 00
[ 33.643833] SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.643835] sdd: sdd1 sdd2 < sdd5 >
[ 33.676863] sd 3:0:0:0: Attached scsi disk sdd
[ 33.680099] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 33.680123] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 33.680141] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 33.680159] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 33.873845] Attempting manual resume
[ 33.873848] swsusp: Resume From Partition 8:5
[ 33.873850] PM: Checking swsusp image.
[ 33.874174] PM: Resume from disk failed.
[ 33.907880] kjournald starting. Commit interval 5 seconds
[ 33.907893] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.015447] eth0: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0
[ 34.015918] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 34.015926] ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 34.069067] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fcfff000-fcfff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 35.349130] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc00009de413]
[ 40.620664] usb 1-2: configuration #1 chosen from 1 choice
[ 40.927614] usb 1-8: new full speed USB device using ohci_hcd and address 3
[ 41.140765] usb 1-8: configuration #1 chosen from 1 choice
[ 43.816406] NET: Registered protocol family 17
[ 44.175031] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 44.175066] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 44.318418] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 44.320051] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 44.349341] Linux video capture interface: v2.00
[ 44.375566] cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
[ 44.375641] CORE cx88[0]: subsystem: 107d:665f, board: WinFast DTV1000-T [card=35,autodetected]
[ 44.375645] TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
[ 44.547216] cx88[0]/2: cx2388x 8802 Driver Manager
[ 44.547547] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 44.547556] ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 44.547565] cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 17, latency: 32, mmio: 0xfb000000
[ 44.571474] cx2388x v4l2 driver version 0.0.6 loaded
[ 44.641096] gameport: EMU10K1 is pci0000:01:09.1/gameport0, io 0xa800, speed 1198kHz
[ 44.641196] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
[ 44.641204] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 17, latency: 32, mmio: 0xfa000000
[ 44.641246] cx88[0]/0: registered device video0 [v4l2]
[ 44.641272] cx88[0]/0: registered device vbi0
[ 44.892799] parport: PnPBIOS parport detected.
[ 44.892852] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 44.902646] input: PC Speaker as /class/input/input1
[ 45.012223] Bluetooth: Core ver 2.11
[ 45.012281] NET: Registered protocol family 31
[ 45.012284] Bluetooth: HCI device and connection manager initialized
[ 45.012287] Bluetooth: HCI socket layer initialized
[ 45.017703] Bluetooth: HCI USB driver ver 2.9
[ 45.093022] nvidia: module license 'NVIDIA' taints kernel.
[ 45.096931] usb 1-2: USB disconnect, address 2
[ 45.096939] hci_usb: probe of 1-2:1.0 failed with error -62
[ 45.351804] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 45.351815] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
[ 45.351823] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 45.352033] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9755 Mon Feb 26 23:16:31 PST 2007
[ 45.523768] usb 1-2: new full speed USB device using ohci_hcd and address 4
[ 45.610638] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
[ 55.711051] usb 1-2: configuration #1 chosen from 1 choice
[ 55.717159] usbcore: registered new interface driver hci_usb
[ 55.717275] usbcore: registered new interface driver hiddev
[ 55.776991] input: Logitech USB Receiver as /class/input/input2
[ 55.777034] input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-8
[ 55.784021] input: Logitech USB Receiver as /class/input/input3
[ 55.784143] input,hiddev96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-8
[ 55.784158] usbcore: registered new interface driver usbhid
[ 55.784163] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 56.134559] fuse init (API version 7.8)
[ 56.160430] lp0: using parport0 (interrupt-driven).
[ 56.223333] Adding 6032368k swap on /dev/disk/by-uuid/69661f11-3ab1-4d6f-a01a-a6a49b65bb70. Priority:-1 extents:1 across:6032368k
[ 56.375901] EXT3 FS on sda1, internal journal
[ 56.682361] NET: Registered protocol family 10
[ 56.682448] lo: Disabled Privacy Extensions
[ 66.915522] eth0: no IPv6 routers present
[ 93.607351] kjournald starting. Commit interval 5 seconds
[ 93.607501] EXT3 FS on sdc1, internal journal
[ 93.607505] EXT3-fs: mounted filesystem with ordered data mode.
[ 100.584468] input: Power Button (FF) as /class/input/input4
[ 100.588792] ACPI: Power Button (FF) [PWRF]
[ 100.614015] input: Power Button (CM) as /class/input/input5
[ 100.618257] ACPI: Power Button (CM) [PWRB]
[ 100.670981] No dock devices found.
[ 100.729773] ibm_acpi: ec object not found
[ 100.826936] Using specific hotkey driver
[ 100.911285] pcc_acpi: loading...
[ 101.092978] powernow-k8: Found 1 AMD Opteron(tm) Processor 144 processors (version 2.00.00)
[ 101.097236] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 106.895755] Bluetooth: L2CAP ver 2.8
[ 106.895759] Bluetooth: L2CAP socket layer initialized
[ 107.081333] Bluetooth: RFCOMM socket layer initialized
[ 107.081348] Bluetooth: RFCOMM TTY layer initialized
[ 107.081350] Bluetooth: RFCOMM ver 1.8
[ 121.817669] eth0: no IPv6 routers present
Předem děkuji