[HOWTO] Avant-Window-Navigator (AWN)

[henrichg]

No to ma stve tiez, ne awn nema nieco take ako groupovanie okien rovnakej aplikacie.
Mna  hnevalo aj to, ze som nemohol spustit cez jednu ikonu viac terminalov, tak som sa naucil otvarat v terminali zalozky.
Inac vo Windows (vo firme) som si nainstaloval taky podobny dock, uz neviem ako sa vola, a na nom ma prave hnevalo to, co Ty potrebujes   Az tak som si na awn z domu zvykol. Ale vo firme uz som dal Ubuntu takze to mam vyriesene 

[Cendas]

qUAKERE Děkuji za radu dostal jsem se dále teď mi to píše chybu.

checking for PYGTK... configure: error: Package requirements (pygtk-2.0 >= 2.8.0) were not met:

No package 'pygtk-2.0' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables PYGTK_CFLAGS
and PYGTK_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.


Koukal jsem že už to tu někdo měl taky když napíšu do Synapticu Python headers najde mi to několik balíků ale netuším které konkrétně bych měl nainstalovat.

[qUAKER]

python-gtk2-dev

[krp3c]

No to ma stve tiez, ne awn nema nieco take ako groupovanie okien rovnakej aplikacie.
Mna  hnevalo aj to, ze som nemohol spustit cez jednu ikonu viac terminalov, tak som sa naucil otvarat v terminali zalozky.
Inac vo Windows (vo firme) som si nainstaloval taky podobny dock, uz neviem ako sa vola, a na nom ma prave hnevalo to, co Ty potrebujes   Az tak som si na awn z domu zvykol. Ale vo firme uz som dal Ubuntu takze to mam vyriesene 

Návrh na groupování oken stejné aplikace jsem zahlédl v launchpadu, označen jako nový. Doufejme, že se této vlastnosti brzo dočkáme 

[Cendas]

qUAKER Děkuji za radu ještě to chtělo dalších pár balíčků které jsem v Synapticu našel.
Už jsem došel až jsem kde bych potřeboval dál poradit.
Tady je výpis

Traceback (most recent call last):
  File "/usr/share/pygtk/2.0/codegen/codegen.py", line 1712, in <module>
    sys.exit(main(sys.argv))
  File "/usr/share/pygtk/2.0/codegen/codegen.py", line 1670, in main
    p.startParsing()
  File "/usr/share/pygtk/2.0/codegen/scmexpr.py", line 113, in startParsing
    for statement in statements:
  File "/usr/share/pygtk/2.0/codegen/scmexpr.py", line 27, in parse
    fp = open(filename, 'r')
IOError: [Errno 2] No such file or directory: '/usr/share/pygtk/2.0/defs/gconf.defs'
make[2]: *** [awn.c] Error 1
make[2]: Leaving directory `/home/cendas/awn-curvescd/pyawn'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/cendas/awn-curvescd'
make: *** [all] Error 2

[qUAKER]

sudo apt-get install build-essential automake1.9 autotools-dev bzr libxdamage-dev libxcomposite-dev libgnome2-common libgnome2-dev libgnome-desktop-dev libgnome-vfs-dev libgtk2.0-dev libwnck-dev libgconf2-dev libglib2.0-dev libdbus-glib-1-dev libgnomevfs2-0 libgnome-desktop-2 libgnome2-0 libwnck-common python-gtk2 python-gconf gnome-common python-dev python-gtk2-dev python-cairo-dev python-gnome2-dev

a po kompilaci

sudo ldconfig

[Cendas]

Ahoj tak jsem dal nainstalovat balíky a balík libgnome-vfs-dev mi to píše že nemůže najít.

[qUAKER]

nainstaluj místo toho tohle

sudo apt-get install gnome-common automake build-essential gtk-doc-tools libglib2.0-dev python2.5-dev bzr python-gtk2-dev python-cairo-dev libglade2-dev libdbus-glib-1-dev libgnome-desktop-dev libgnome-dev libgsf-gnome-1-dev libwnck-dev libsexy-dev libnotify-dev librsvg2-dev libgnome-menu-dev libgtop2-dev libvte-dev python-alsaaudio python-feedparser python-gnome2-extras-dev

ten balík byl posledně v Gutsy a v Hardy chybí

[Cendas]

Ahoj Tak jsem to nainstaloval spustil kompilaci na konci jsem dostal tenhle výpis.

creating avant-window-navigator
make[3]: Leaving directory `/home/cendas/awn-curvescd/src'
make[2]: Leaving directory `/home/cendas/awn-curvescd/src'
Making all in awn-applet-activation
make[2]: Entering directory `/home/cendas/awn-curvescd/awn-applet-activation'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/cendas/awn-curvescd/awn-applet-activation'
Making all in data
make[2]: Entering directory `/home/cendas/awn-curvescd/data'
Making all in active
make[3]: Entering directory `/home/cendas/awn-curvescd/data/active'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/cendas/awn-curvescd/data/active'
make[3]: Entering directory `/home/cendas/awn-curvescd/data'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/cendas/awn-curvescd/data'
make[2]: Leaving directory `/home/cendas/awn-curvescd/data'
Making all in applets
make[2]: Entering directory `/home/cendas/awn-curvescd/applets'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/cendas/awn-curvescd/applets'
Making all in po
make[2]: Entering directory `/home/cendas/awn-curvescd/po'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/cendas/awn-curvescd/po'
Making all in pyawn
make[2]: Entering directory `/home/cendas/awn-curvescd/pyawn'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/cendas/awn-curvescd/pyawn'
Making all in awn-manager
make[2]: Entering directory `/home/cendas/awn-curvescd/awn-manager'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/cendas/awn-curvescd/awn-manager'
make[2]: Entering directory `/home/cendas/awn-curvescd'
make[2]: Leaving directory `/home/cendas/awn-curvescd'
make[1]: Leaving directory `/home/cendas/awn-curvescd'

[qUAKER]

to je správně, teď už jen "sudo make install"

[Cendas]

Zkoušel jsem checkinstall
Napsalo mi to tohle

Installing with make install...

========================= Installation results ===========================
Making install in libawn
make[1]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[1]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
make  install-am
make[2]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[2]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
make[3]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[3]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
test -z "/usr/local/lib" || /bin/mkdir -p "/usr/local/lib"
 /bin/bash ../libtool   --mode=install /usr/bin/install -c  'libawn.la' '/usr/local/lib/libawn.la'
/usr/bin/install -c .libs/libawn.so.0.0.1 /usr/local/lib/libawn.so.0.0.1
(cd /usr/local/lib && { ln -s -f libawn.so.0.0.1 libawn.so.0 || { rm -f libawn.so.0 && ln -s libawn.so.0.0.1 libawn.so.0; }; })
(cd /usr/local/lib && { ln -s -f libawn.so.0.0.1 libawn.so || { rm -f libawn.so && ln -s libawn.so.0.0.1 libawn.so; }; })
/usr/bin/install -c .libs/libawn.lai /usr/local/lib/libawn.la
/usr/bin/install -c .libs/libawn.a /usr/local/lib/libawn.a
chmod 644 /usr/local/lib/libawn.a
chmod: changing permissions of `/usr/local/lib/libawn.a': No such file or directory
make[3]: *** [install-libLTLIBRARIES] Error 1
make[3]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make: *** [install-recursive] Error 1

****  Installation failed. Aborting package creation.

Cleaning up...OK

Bye.

[qUAKER]

Spustil jsi checkinstall se "sudo"?

[Cendas]

Spustil jsi checkinstall se "sudo"?

Spustil samodřejmě se sudo.

[qUAKER]

aha už vím..ty musíš tohle instalovat tam kde je AWN, tzn. do /usr.

Takže kompilace musí probíhat:


./configure --prefix=/usr(nebo ./autogen.sh --prefix=/usr, pokud existuje)
make
sudo checkinstall

[Cendas]

Ahoj tak jsem to zkusil jak jsi psal kompilace proběhla v pořádku ale sudo checkinstall skončil se stejnou chybou jako předtím.

[qUAKER]

pošli ten výpis

[Cendas]

Tady je ten výpis.

Installing with make install...

========================= Installation results ===========================
Making install in libawn
make[1]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[1]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
make  install-am
make[2]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[2]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
make[3]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[3]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
test -z "/usr/lib" || /bin/mkdir -p "/usr/lib"
 /bin/bash ../libtool   --mode=install /usr/bin/install -c  'libawn.la' '/usr/lib/libawn.la'
/usr/bin/install -c .libs/libawn.so.0.0.1 /usr/lib/libawn.so.0.0.1
(cd /usr/lib && { ln -s -f libawn.so.0.0.1 libawn.so.0 || { rm -f libawn.so.0 && ln -s libawn.so.0.0.1 libawn.so.0; }; })
(cd /usr/lib && { ln -s -f libawn.so.0.0.1 libawn.so || { rm -f libawn.so && ln -s libawn.so.0.0.1 libawn.so; }; })
/usr/bin/install -c .libs/libawn.lai /usr/lib/libawn.la
/usr/bin/install -c .libs/libawn.a /usr/lib/libawn.a
chmod 644 /usr/lib/libawn.a
chmod: changing permissions of `/usr/lib/libawn.a': No such file or directory
make[3]: *** [install-libLTLIBRARIES] Error 1
make[3]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make: *** [install-recursive] Error 1

****  Installation failed. Aborting package creation.

Cleaning up...OK

Bye.

[qUAKER]

zkus klasik make install

[Cendas]

Zkusil jsem je to skoro stejné.

cendas@cendas-desktop:~/awn-curvescd$ make install
Making install in libawn
make[1]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[1]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
make  install-am
make[2]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[2]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
make[3]: Entering directory `/home/cendas/awn-curvescd/libawn'
make[3]: Circular stamp-awn-enum-types.h <- awn-enum-types.h dependency dropped.
test -z "/usr/lib" || /bin/mkdir -p "/usr/lib"
 /bin/bash ../libtool   --mode=install /usr/bin/install -c  'libawn.la' '/usr/lib/libawn.la'
/usr/bin/install -c .libs/libawn.so.0.0.1 /usr/lib/libawn.so.0.0.1
/usr/bin/install: cannot remove `/usr/lib/libawn.so.0.0.1': Permission denied
make[3]: *** [install-libLTLIBRARIES] Error 1
make[3]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/cendas/awn-curvescd/libawn'
make: *** [install-recursive] Error 1

[qUAKER]

sudo make install

[Cendas]

Zkusil jsem ale stejně to mi vypsalo nějaké chyby.
Dám jsem jenom ty chyby celý výpis by byl dlouhý.

libtool: install: error: cannot install `awn.la' to a directory not ending in /usr/local/lib/python2.5/site-packages/awn
make[2]: *** [install-pyawnexecLTLIBRARIES] Error 1
make[2]: Leaving directory `/home/cendas/awn-curvescd/pyawn'
make[1]: *** [install-am] Error 2
make[1]: Leaving directory `/home/cendas/awn-curvescd/pyawn'
make: *** [install-recursive] Error 1

[qUAKER]

make install s configure do /usr

[Cendas]

Tak teď nevím jestli ti rozumím napíšu jak jsem postupoval.
Dal jsem

./autogen.sh --prefix=/usr
sudo make install

Taky se mi dnes awn po restartu spustil myslím že se nainstaloval ale nefunguje správně když na něm zmáčknu pravým tlačítkem a dám Nastavení Tak mi vyzkočí okno se správou "Sorry, Awn Manager closed unexpectedly"

[Cendas]

Ahoj qUAKERE tak už se mi podařilo to nainstalovat přidal jsem pomocí Synapticu nějaké balíky pro awn dal znova sudo make install a už se mi to nainstalovalo a funguje i nastavení.
Děkuji ti za pomoc a rady. 

[qUAKER]

to jsem rád