GDM - černá obrazovka [vyřešeno]

[MaJJ]

Zdravím,

mám problém s GDM - když spustím počítač a doběhnou ty příkazy, tak by se mělo nastartovat (to GDM). Přehraje se mi takové to cvaknutí - když se načte - jenže vidím jen černou obrazovku. Mám ten pocit, že se to děje i při přepnutí na konzoli (Ctrl+Alt+F1). Pokud normálně zadám svoje jméno, odentruju, heslo, odentruju, tak mi v pohodě najede GNOME tak, jak má.

Pokud najedu z GRUBu recovery mode, tak se mi přihlásí do konzole root, napíšu startx a vše je v pohodě.

Nevíte, čím to může být? Tady je log:

Kód: [Vybrat]

X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Linux Ubuntu (xorg-server 2:1.3.0.0.dfsg-12ubuntu8)
Current Operating System: Linux linux 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686
Build Date: 29 September 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 14 06:16:07 2007
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(II) Module already built-in
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(EE) fglrx(0): === [swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
(II) Module already built-in
[atiddx] ASYNCIO init succeed!
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server

[c4pp4]

Chtělo by to dát sem obsah /etc/X11/xorg.conf a také informaci, jaké rozlišení používáte v Gnome. Spouštění Xserveru z "recovery mode" je docela bezpečnostní riziko.

[MaJJ]

Tady to je. Používám 1600x1200.

Kód: [Vybrat]

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
Load "GLcore"
Load "v4l"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "SyncMaster"
Vendorname "Samsung"
Modelname "Samsung SyncMaster 204T/204Ts/214T,SyncMaster Magic CX201Ts(Digital)"
Horizsync 30-81
Vertrefresh 56-75
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection

Section "Device"
Identifier "Generic Video Card"
Boardname "ati"
Busid "PCI:5:0:0"
Driver "fglrx"
Screen 0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "SyncMaster"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 1600 1200
Modes "800x600@75" "800x600@60" "800x600@72" "832x624@75" "800x600@56" "1024x768@75" "640x480@75" "1024x768@70" "640x480@72" "1024x768@60" "640x480@60" "1152x864@75" "1280x1024@75" "1280x960@60" "1280x1024@60" "1280x960@75" "1400x1050@60" "1600x1200@65" "1600x1200@60"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Disable"
EndSection

Section "device" # 
Identifier "device1"
Boardname "VESA driver (generic)"
Busid "PCI:5:0:1"
Driver "vesa"
Screen 0
EndSection
Section "screen" # 
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60" "640x480@72" "640x480@75" "800x600@56" "800x600@72" "800x600@75" "800x600@60" "832x624@75" "1024x768@75" "1024x768@70" "1024x768@60" "1152x864@75" "1280x1024@75" "1280x960@60" "1280x1024@60" "1280x960@75" "1400x1050@60" "1600x1200@65" "1600x1200@60"
EndSubSection
EndSection
Section "monitor" # 
Identifier "monitor1"
Vendorname "Samsung"
Modelname "Samsung SyncMaster 204T/204Ts/214T,SyncMaster Magic CX201Ts(Digital)"
Horizsync 30-81
Vertrefresh 56-75
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection

[c4pp4]

Section "Screen"
   Identifier   "Default Screen"
   Device      "Generic Video Card"
   Monitor      "SyncMaster"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
      Virtual   1600   1200
      Modes      "800x600@75"   "800x600@60"   "800x600@72"   "832x624@75"   "800x600@56"   "1024x768@75"   "640x480@75"   "1024x768@70"   "640x480@72"   "1024x768@60"   "640x480@60"   "1152x864@75"   "1280x1024@75"   "1280x960@60"   "1280x1024@60"   "1280x960@75"   "1400x1050@60"   "1600x1200@65"   "1600x1200@60"
   EndSubSection
EndSection

Za předpokladu, že monitor podporuje rozlišení 1600x1200 při vertikální frekvenci 65Hz a že řádky "modeline" v sekci "Monitor" s identifikátorem "SyncMaster" jsou korektní, výše citovanou sekci bych přepsal takto:

Section "Screen"
   Identifier   "Default Screen"
   Device      "Generic Video Card"
   Monitor      "SyncMaster"
   Defaultdepth   24
   SubSection "Display"
      Depth   24
#      Virtual   1600   1200
#      Modes      "800x600@75"   "800x600@60"   "800x600@72"   "832x624@75"   "800x600@56"   "1024x768@75"   "640x480@75"   "1024x768@70"   "640x480@72"   "1024x768@60"   "640x480@60"   "1152x864@75"   "1280x1024@75"   "1280x960@60"   "1280x1024@60"   "1280x960@75"   "1400x1050@60"   "1600x1200@65"   "1600x1200@60"
      Modes   "1600x1200@65"
   EndSubSection
EndSection

[MaJJ]

díky, už to funguje (sice jsem se trochu lekl, když jsem to nastavil, restartoval Xka, GDM naběhl, ale samotné GNOME už ne ; vypl a zapl jsem PC a bylo to už v pohodě).

a ... abych nezačínal nový thread ...
strašně pomalu se mi objevuje to okno s vypínáním (menu > vypnout, nebo jak to je) ... a poté, co naběhne, tak tam je jen restartovat + vypnout (a nahoře samozřejmě odhlásit atd.), když to zruším a znova nechám naběhnout, už tam je i hibernovat atd. (ale jede to pořád stejně pomalu) ... nějaké nápady co s tím?

[c4pp4]

Napadá mě, jestli to není následek používání xserveru z recovery mode, ale čistě jen hádám.

[anicka]

... abych nezačínal nový thread ... :D
strašně pomalu se mi objevuje to okno s vypínáním (menu > vypnout, nebo jak to je) ... a poté, co naběhne, tak tam je jen restartovat + vypnout (a nahoře samozřejmě odhlásit atd.), když to zruším a znova nechám naběhnout, už tam je i hibernovat atd. (ale jede to pořád stejně pomalu) ... nějaké nápady co s tím?

Taky by nebylo od věci, kdybyste napsal, jak jste PC vypínal? Jestli korektně přes volbu vypnutí/ukončení činnosti PC anebo brutálně ON/OFF či klávesou SysRQ (více viz Magická klávesa SysRQ)?

Tip - nepomohl by reinstall GDM?

[MaJJ]

No tak já to vypínám tím oknem, klasicky. Párkrát mi ale určitě ruply nervy (čekání na to okno) a vypl jsem to natvrdo ... ale to bylo až potom, co se to zpomalilo.