Problem s grafikou [vyřešeno]

[meatbug]

Myslim si ze nemozem nastavit obnovovaciu frekvenciu monitoru mam Hansol 730ED a v systeme>sprava>screens and graphics a tam mam defaultne vybraty nejaky iny...skusal som nastavovat nieco v tych grafickych nastaveniach a v xorg.conf a narobilo mi tam trosku paseku, no ono mi to samo generuje dalsie (ja to chapem ako zalohy) kde tam je xorg.conf.1 a pod...no proste nemozem nastavit viac ako 70 nieco...teraz mam 50Hz...pozrite:

Kód: [Vybrat]

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Apr 16 20:37:13 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
Load "glx"
Load "v4l"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "sk"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
Identifier "730ED"
Vendorname "Hansol Electronics"
Modelname "Hansol Electronics Mazellan17px"
Horizsync 30.0-85.0
Vertrefresh 50.0-120.0
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
Gamma 1.0
EndSection

Section "Device"
Identifier "nVidia Corporation NV17 [GeForce4 MX 440]"
Boardname "NVIDIA GeForce4 (generic)"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
Vendorname "NVIDIA"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation NV17 [GeForce4 MX 440]"
Monitor "730ED"
Defaultdepth 24
Option "AddARGBVisuals" "True"
Option "AddARGBGLXVisuals" "True"
Option "NoLogo" "True"
SubSection "Display"
Depth 24
Virtual 1792 1344
Modes "1024x768@60" "1024x768@43" "1024x768@70" "1152x864@75" "1024x768@75" "1280x1024@75" "1024x768@85" "1280x960@60" "832x624@75" "1280x1024@60" "800x600@60" "1280x960@75" "800x600@85" "1400x1050@60" "800x600@75" "1400x1050@75" "800x600@72" "1600x1200@65" "800x600@56" "1600x1200@60" "640x480@85" "1792x1344@60" "640x480@75" "640x480@72" "640x480@60"
EndSubSection
EndSection

Section "device" #   
Identifier "device1"
Boardname "NVIDIA GeForce4 (generic)"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
Vendorname "NVIDIA"
EndSection
Section "screen" #   
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
SubSection "Display"
Depth 24
Modes "640x480@60" "640x480@72" "640x480@75" "640x480@85" "800x600@56" "800x600@72" "800x600@75" "800x600@85" "800x600@60" "832x624@75" "1024x768@85" "1024x768@75" "1024x768@70" "1024x768@60" "1024x768@43" "1152x864@75" "1280x960@60" "1280x1024@60" "1400x1050@60"
EndSubSection
EndSection
Section "monitor" #   
Identifier "monitor1"
Vendorname "Plug 'n' Play"
Modelname "Plug 'n' Play"
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
pomozte mi prosim...kontaktoval som sa aj na inom fore, a vraveli ze v tom xorgu mozem nastavit aj frekvenciu ale neviem ako...help...

[TIBOR]

Ak pouzivas nvidia ovladac

Kód: [Vybrat]

Driver "nvidia"tak modeline uz nieje funkcne. Namiesto modeline pouziva ovladac nvidia nastavenie metamodes. Toto mam ja.

Kód: [Vybrat]

Option         "metamodes" "1280x1024_60 +0+0; 1280x1024 +0+0; 1024x768 +0+0; 832x624 +0+0; 800x600 +0+0; 640x480 +0+0"Nastavuje sa to cez nastoj nvidia-settings.

[meatbug]

proste poradte mi co mam spravit s tymto xorg.conf - ved to tam vyzera hrozne....plz..

[TIBOR]

Tazko radit lebo kazdy model gr. karty sa moze spravat inak.
Ale ak chces radu v prvom rade si zalohuj terajsi xorg.conf.
Potom mozes odstranit z tvojho xorg.conf riadky

Kód: [Vybrat]

modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
  modeline  "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
  modeline  "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
  modeline  "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsyncTieto riadky

Kód: [Vybrat]

Virtual 1792 1344
Modes "1024x768@60" "1024x768@43" "1024x768@70" "1152x864@75" "1024x768@75" "1280x1024@75" "1024x768@85" "1280x960@60" "832x624@75" "1280x1024@60" "800x600@60" "1280x960@75" "800x600@85" "1400x1050@60" "800x600@75" "1400x1050@75" "800x600@72" "1600x1200@65" "800x600@56" "1600x1200@60" "640x480@85" "1792x1344@60" "640x480@75" "640x480@72" "640x480@60"nahrad tymto

Kód: [Vybrat]

       Modes      "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"Dalej neviem naco tam mas tie "device", "screen" a monitor konciace s # mozes ich skusit zakomentovat.
Dalej zisti si z manualu vertikalnu a horizontalnu frekvenciu pre tvoj monitor a zadaj ich v sekcii

Kód: [Vybrat]

Section "Monitor"
Identifier "730ED"
Vendorname "Hansol Electronics"
Modelname "Hansol Electronics Mazellan17px"
Horizsync 30.0-85.0
Vertrefresh 50.0-120.0Ak ti s tymto nabehne graficke prostredie spusti terminal a zadaj

Kód: [Vybrat]

sudo nvidia-settingsa nastav si vsetko v grafike a daj to ulozit do xorg.conf
Pripadne si mozes vygenerovat novy xorg.conf prikazom

Kód: [Vybrat]

sudo dpkg-reconfigure xserver-xorgEste ta upozornim ze aknastavis pouzivanie ovladaca nvidia prestane ti system-predvolby-rozlisenie obrazovky spravne zobrazovat frekvenciu monitora.
Spravnu frekvenciu zistis bud v menu monitora v casti information alebo v terminali prikazom

Kód: [Vybrat]

nvidia-settings -q RefreshRate
Este na koniec na ukazku moj xorg.conf

Kód: [Vybrat]

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder26)  Wed Sep 12 14:29:53 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Uncomment if you have a wacom tablet
# InputDevice     "stylus" "SendCoreEvents"
# InputDevice     "cursor" "SendCoreEvents"
# InputDevice     "eraser" "SendCoreEvents"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "JT198x6"
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "JEN JT198x6"
    HorizSync       30.0 - 80.0
    VertRefresh     50.0 - 75.0
EndSection

Section "Device"
    Identifier     "nVidia Corporation NV44A [GeForce 6200]"
    Driver         "nvidia"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    BusID          "PCI:1:0:0"
    Option "VBERestore" "yes"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6200"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    BusID          "PCI:1:0:0"
    Option "VBERestore" "yes"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV44A [GeForce 6200]"
    Monitor        "JT198x6"
    DefaultDepth    24
    SubSection     "Display"
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024_60 +0+0; 1280x1024 +0+0; 1024x768 +0+0; 832x624 +0+0; 800x600 +0+0; 640x480 +0+0"
EndSection


[meatbug]

a este ako mam zalohovat xorg? (som lama)

[TIBOR]

Napriklad v terminali prikazom

Kód: [Vybrat]

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_zalohakde cestu na zalohovany subor(/etc/X11/xorg.conf_zaloha) si mozes zmenit.
Alebo normalne pretiahnutim suboru xorg.conf na miesto kam mozes zapisovat(napr. home alebo iny disk)

[meatbug]

a este taky detail aky editor mam pouzit v terminali aby som mohol editovat xorg.conf ked aj tak je len na citanie a nemozem ho editnut...

[meatbug]

POMOC toto sa mi teraz stalo omg: nevidim horne tlacitka na minimalizovanie a pod..
len som predtym cez terminal spustal prikaz sudo nvidia-settings ci co a tam som iba nastavil 85Hz a ulozil do xorg.conf restartol a toto  sa mi stalo...no este predtym som odinstaloval screens and graphic lebo kvoli tomu mi to urobilo bordel v tomto xorgu...takto vyzera...





nemozem ani terminal zapnut, ak ho zapnem tak mam uplne bielu ozbrazovku nic iba bielu cast...omg..

[TIBOR]

Tak toto su priznaky toho ze ti nabehlo 3d akcelerovane prostredie ale s chybami. Malo by to prestat po tom co ho vypnes.
Pravym klik na plochu-zmenit vlastnosti plochy-vizualne efekty-ziadne. Pripadne vyskusat v prihlasovacej obrazovke nastavit start zachranneho gnome.
Ak to spojazdnis daj sem tvoj novy xorg.conf a pozrieme co stym. Pri nvidiach to obycajne byva ze ti tam chybaju perametre
 

Kód: [Vybrat]

   Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"ktore si tam mal ovsem teraz neviem ci su tam.

[meatbug]

no a stale neviem ako editnut XORG.CONF

[TIBOR]

Prepac. Ak si v grafike napises v terminali

Kód: [Vybrat]

sudo gedit /etc/X11/xorg.confco znamena sudo ze das programu pravo zapisovat na miesta disku kde to bezny uzivatel nemoze. gedit je program na upravu textovych dokumentov, /etc/X11/ je cesta k suboru a xorg.conf je subor ktori sa ti otvori.
V konzole mozes pouzit napriklad textovy editor nano

Kód: [Vybrat]

sudo nano /etc/X11/xorg.confpripadne program mc ktori je spravcom suborov pre prikazovy riadok a cez F4 umoznuje editovat textove subory

Kód: [Vybrat]

sudo mcViac o postupoch najdes na wiki alebo pomocou vyhladavania.

[meatbug]

NO spravil som to trosku inak nejak som sa vynasiel...nejak som sa nastavil na roota a mal som tam zalohovany subor xorg.conf.1 ten som skopiroval na plochu a editol nieco podla predchadzajucich odpovedi tu...potom cez terminal som to prepisal na xorg.conf a hned aj nahradil povodny xorg.conf...Teraz to vyzera tak skuste skontrolovat..:

Kód: [Vybrat]

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Mon Apr 16 20:38:05 PDT 2007

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Hansol 730ED"
    HorizSync       30.0 - 72.0
    VertRefresh     50.0 - 130.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce4 MX 440"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "metamodes" "CRT: 1024x768_85 +0+0; CRT: 1024x768 +0+0; CRT: 800x600 +0+0; CRT: 640x480 +0+0"
    SubSection     "Display"
        Depth       24
        Modes      "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Teraz to vyzera v pohode aspon podla mna a ak dam prikaz sudo nvidia-settings -q ResfreshRate tak mi vypise toto:

Kód: [Vybrat]

  Attribute 'RefreshRate' (meatbug:0.0; display device: CRT-0): 85,00 Hz.
    'RefreshRate' is an integer attribute.
    'RefreshRate' is a read-only attribute.
    'RefreshRate' is display device specific.
    'RefreshRate' can use the following target types: X Screen, GPU.
chcel som 85 Hz myslim ze je to aj tak nie? NO ALE! ak idem cez system>rozlisenie obrazovky tak pozrite:



Je to Okej???

[TIBOR]

Podla tohto sudo nvidia-settings -q ResfreshRate ides na 85Hz. Ak ich mas nastavene je to OK.
Ako som pisal hore pri ovladaci nvidia si nastavenie rozlisenia obrazovky nevsimaj.
U mna
  Attribute 'RefreshRate' (t-desktop:0.0; display device: CRT-0): 60,02 Hz.
    'RefreshRate' is an integer attribute.
    'RefreshRate' is a read-only attribute.
    'RefreshRate' is display device specific.
    'RefreshRate' can use the following target types: X Screen, GPU.

a v grafike 50Hz.

Podla toho xorg.conf mas teraz vypnute efekty?

[meatbug]

nie...efekty som zapol vsetky mozne co sa mi pacili ide mi to v pohode ako ukazuje xorg.conf a ten posledny screen...no...DUFAM ze problem je vyrieseny alebo nie? 

[TIBOR]

Zrejme ano. Nezabudni si znovu zalohovat xorg.conf pre pripad ze sa to rozhadze pri dalsich experimentoch.