CONKY

[karel kudrna]

otevři to jako root

Kód: [Vybrat]

gksudo gedit /etc/X11/xorg.conf

[kafooo]

nebo

Kód: [Vybrat]

gksudo nautilus

[Rawen]

moje vypilované:

http://rawen.kvstudio.com/temp/Screenshot.png

Kód: [Vybrat]

# set to yes if you want Conky to be forked in the background
background yes

# X font when Xft is disabled, you can pick one with program xfontsel
#font 5x7
#font 6x10
#font 7x13
#font 8x13
#font 9x15
#font *mintsmild.se*
#font -misc-fixed-bold-*-*-*-*-*-*-*-*-*-*-*


# Use Xft?
use_xft yes

# Set conky on the bottom of all other applications
on_bottom yes

# Xft font when Xft is enabled
#xftfont Bitstream Vera Sans Mono:size=8
xftfont Monospace:size=8

# Text alpha when using Xft
xftalpha 0.8

# Print everything to stdout?
# out_to_console no

# MPD host/port
# mpd_host localhost
# mpd_port 6600
# mpd_password tinker_bell

# Print everything to console?
# out_to_console no

# mail spool
mail_spool $MAIL

# Update interval in seconds
update_interval 5.0

# This is the number of times Conky will update before quitting.
# Set to zero to run forever.
total_run_times 0

# Use pseudo transparency with own_window?
own_window_transparent yes

# Create own window instead of using desktop (required in nautilus) - override
own_window yes
own_window_hints undecorated skip_taskbar skip_pager
own_window_type override

# If own_window_transparent is set to no, you can set the background colour here
own_window_colour hotpink

# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes

# Minimum size of text area
minimum_size 20 5

# Draw shades?
draw_shades yes

# Draw outlines?
draw_outline no

# Draw borders around text
draw_borders no

# Stippled borders?
stippled_borders 1

# border margins
border_margin 1

# border width
border_width 1

# Default colors and also border colors
default_color white
default_shade_color black
default_outline_color black

# Text alignment, other possible values are commented
#alignment top_left
#alignment top_right
alignment bottom_left
#alignment bottom_right
#alignment none

# Gap between borders of screen and text
# same thing as passing -x at command line
gap_x 12
gap_y 40

# Subtract file system buffers from used memory?
no_buffers yes

# set to yes if you want all text to be in uppercase
uppercase no

# number of cpu samples to average
# set to 1 to disable averaging
cpu_avg_samples 2

# number of net samples to average
# set to 1 to disable averaging
net_avg_samples 2

# Force UTF8? note that UTF8 support required XFT
override_utf8_locale no


# Add spaces to keep things from moving about?  This only affects certain objects.
use_spacer no

#   mldonkey_hostname     Hostname for mldonkey stuff, defaults to localhost
#   mldonkey_port         Mldonkey port, 4001 default
#   mldonkey_login        Mldonkey login, default none
#   mldonkey_password     Mldonkey password, default none

# boinc (seti) dir
# seti_dir /opt/seti

# variable is given either in format $variable or in ${variable}. Latter
# allows characters right after the variable and must be used in network
# stuff because of an argument

# stuff after 'TEXT' will be formatted on screen

TEXT
${color ec551e}
$nodename - $sysname $kernel on $machine
$time

${color}$stippled_hr
${color 6aaaea}Uptime:$color $uptime ${color 6aaaea}- Load:$color $loadavg
${color 6aaaea}CPU Usage:${color} $cpu% ${cpubar}
${color}${cpugraph white}
${color 6aaaea}RAM Usage:$color $mem/$memmax - $memperc% ${membar}
${color 6aaaea}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
$color$stippled_hr
${color 6aaaea}Networking:
 Down:${color} ${downspeed eth1} k/s${color 9aa3dc} ${offset 80} ${color 6aaaea}Up:${color} ${upspeed eth1} k/s
${color}${downspeedgraph eth1 32,150 white} ${color}${upspeedgraph eth1 32,150 white}
$stippled_hr
${color 6aaaea}Total Down: ${color}${totaldown eth1}  ${color 6aaaea}Total Up: ${color}${totalup eth1}
${color 6aaaea}Free disc space: ${color}$fs_free_perc%
${color 6aaaea}GPU Temp: ${color}${execi 30 nvidia-settings -q [gpu:0]/GPUCoreTemp | grep '):' | awk '{print $4}' | sed 's/\.//'} C
${color}$stippled_hr
${color 6aaaea}Processes:$color $processes  ${color 6aaaea}Running:$color $running_processes

${color ec551e}Name              PID     CPU%   MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color 9aa3dc} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color 9aa3dc} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color 9aa3dc} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color 9aa3dc} ${top name 5} ${top pid 5} ${top cpu 5} ${top mem 5}

${color ec551e}Mem usage
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color 9aa3dc} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color 9aa3dc} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color 9aa3dc} ${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
${color 9aa3dc} ${top_mem name 5} ${top_mem pid 5} ${top_mem cpu 5} ${top_mem mem 5}


[drude]

Tak už jsem ty conky zprovoznil ale mám další problém. Když je vypnu a chci upravit a vložín nějaký zdejší kód a znovu zapnu nic se nestane mám stále ty samí.  

[karel kudrna]

Tak už jsem ty conky zprovoznil ale mám další problém. Když je vypnu a chci upravit a vložín nějaký zdejší kód a znovu zapnu nic se nestane mám stále ty samí. 

zřejmě drobný problém s http://wiki.ubuntu.cz/Root_sudo?highlight=%28sudo%29

[premet]

Tak se přidávám se svým conky  .
http://img520.imageshack.us/img520/561/obrazovkaup9.png

Kód: [Vybrat]

stippled_borders 0
border_margin 6
border_width 1


own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

double_buffer yes

use_spacer yes
use_xft yes

update_interval 1.0

minimum_size 5 5

draw_shades no

draw_outline no
draw_borders no

xftfont sans:size=8.5

uppercase no

default_color FFFFFF
 
alignment top_left

gap_x 10
gap_y 40

TEXT
$color
${color 000000}SYSTEM ${hr 1}
${color FFFFFF} $nodename $sysname $kernel on $machine
${color 000000}CPU ${hr 1}
${color FFFFFF} CPU: ${cpu cpu0}%
${cpubar cpu0 10,350}
${color 000000}Top Processes${hr 1}
${color 000000}Name               ${alignr}     CPU%
${color FFFFFF}${top name 1}      ${alignr} ${top cpu 1}
${color FFFFFF}${top name 2}      ${alignr} ${top cpu 2}
${color FFFFFF}${top name 3}      ${alignr} ${top cpu 3}
${color 000000}UPTIME ${hr 1} $color
${color FFFFFF}${alignc} $uptime
${color 000000}MEMORY ${hr 1}
${color 000000}RAM: ${alignc}  $mem ${alignr}  max: $memmax
${color 000000}Top Memory${hr 1}
${color FFFFFF}${membar 6}$color
${color 000000}Name               ${alignr}     MEM%
${color FFFFFF}${top_mem name 1}      ${alignr} ${top_mem mem 1}
${color FFFFFF}${top_mem name 2}      ${alignr} ${top_mem mem 2}
${color FFFFFF}${top_mem name 3}      ${alignr} ${top_mem mem 3}
${color 000000}Info HDD Memory${hr 1}$color
${color 000000}System: ${color FFFFFF} ${fs_free /}  ${alignr} ${fs_used /} / ${fs_size /}
${fs_bar 6 /}$color
${color 000000}Home:     ${color FFFFFF} ${fs_free /home} ${alignr}  ${fs_used /home} / ${fs_size /home}
${fs_bar 6 /home}$color
${color 000000}My book:   ${color FFFFFF}   ${fs_free /media/My Book_} ${alignr}  ${fs_used /media/My Book_} / ${fs_size /media/My Book_}
${fs_bar 6 /media/My Book_}$color
${color 000000}NETWORK ${hr 1}$color
${color 000000}IP addres: ${color FFFFFF}${alignr}${addr eth0}
${color 000000}Down: ${color FFFFFF}${downspeed eth0} ${color 000000} KiB/s ${color 000000} ${alignr} Up: ${color FFFFFF}${upspeed eth0} ${color 000000}KiB/s
${color 000000}Down: ${color FFFFFF} ${totaldown eth0} ${color 000000} ${alignr}Up: ${color FFFFFF}  ${totalup eth0}
${downspeedgraph eth0 30,150 ff841f 000000} ${alignr}${upspeedgraph eth0 30,150 ff841f 000000}
$color$stippled_hr${if_running amarokapp}
${color}${alignc}Now Playing${color white}
${alignc}${execi 10 ~/.amarok artist}
${alignc}${execi 10 ~/.amarok title}
${execibar 1 ~/.amarok progress}
${alignc}"${execi 10 ~/.amarok album}"
${alignc}${execi 10 ~/.amarok year} - ${color white}${alignc}${execi 10 ~/.amarok genre}
$color$stippled_hr


[Cepela]

Muzete mi nekdo poradit, co mam pridat do Conky, aby mi to ukazovalo teplotu CPU a HDD? V jinych programech mi to na ntb v pohode bezi, tak by to mohlo jit i tady.

[karel kudrna]

Muzete mi nekdo poradit, co mam pridat do Conky, aby mi to ukazovalo teplotu CPU a HDD? V jinych programech mi to na ntb v pohode bezi, tak by to mohlo jit i tady.

hledej v konfiguracích a screenech, vypadá to asi takhle

Kód: [Vybrat]

CPU Temp: ${acpitemp}C pokud ti ovšem šlape acpi. nebo prohledej tohle
http://conky.sourceforge.net/variables.html
mě se tohle zrovna nedaří, ale v jiných programech mi to šlape.

[Cepela]

Diky za radu, uz mi to slape jak hodinky.

[Cepela]

Tak mam jeste jednu otazku, kterym parametrem se nastavuje sirka toho okna, nejak to nemuzu naji.

[Cepela]

Beru zpet, uz sem to vyresil, precijenom nejsem tak blbej jak sem si myslel. Stacilo zmenit velikosti vsech grafu co mam v tom configu. 

[Marcel 'Maky' Šuška]

Muzete mi nekdo poradit, co mam pridat do Conky, aby mi to ukazovalo teplotu CPU a HDD? V jinych programech mi to na ntb v pohode bezi, tak by to mohlo jit i tady.

Napište, co jste do conek dal, aby vám to ukazovalo teplotu, tohle mne zajímá. Taky se pochlubte se scrrrenem.

[Cepela]

To co mi na predchozi strance poradil Kudrna:

Kód: [Vybrat]

CPU Temp: ${acpitemp}C a behalo to okamzite bez problemu.
Spis se mi ukazal dalsi problem, mam conky dane aby se spoustelo hned po startu, coz i funguje, ale pokazde mi prekryje ostatni okna, tak ho musim vypnout a znovu zapnout a pak uz to bezi normalne na plose.
Tady je spoustec, tak jak sem ho napsal podle navodu:

Kód: [Vybrat]

#!/bin/sh
sleep 20
conky

A bych se tedy taky trochu pochlubil, tak takle to vypada u me:


a konfigurak:

Kód: [Vybrat]

own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

double_buffer yes

use_spacer no
use_xft yes

update_interval 1.0

maximum_size 150 5

draw_shades no

draw_outline no
draw_borders no


xftfont ae_AlMothnna:size=6

uppercase no

default_color ff9730

alignment bottom_right

gap_x 8
gap_y 30

TEXT
$color
${color 80d62b}SYSTEM ${hr 1}
${color ff9730} $nodename $sysname $kernel on $machine
${color 80d62b}CPU ${hr 1}
${color ff9730} CPU1: ${cpu cpu0}% ${alignr} CPU2: ${cpu cpu1}% 
${cpubar cpu0 10,110} ${alignr} ${cpubar cpu0 10,110}
${cpugraph cpu0 30,110 ff841f 80d62b } ${alignr} ${cpugraph cpu1 30,110 ff841f 80d62b}
CPU Temp: ${acpitemp}C
${color 80d62b}Top Processes${hr 1}
${color 80d62b}Name               ${alignr}     CPU%
${color ff9730}${top name 1}      ${alignr} ${top cpu 1}
${color ff9730}${top name 2}      ${alignr} ${top cpu 2}
${color ff9730}${top name 3}      ${alignr} ${top cpu 3}
${color 80d62b}UPTIME ${hr 1} $color
${color ff9730}${alignc} $uptime
${color 80d62b}MEMORY / SWAP ${hr 1}
${color ff9730}RAM: ${alignc}  $mem ${alignr}  max: $memmax
${color ff9730}${membar 6}$color
${color ff9730}Swap: ${alignc} $swap  ${alignr}  max: $swapmax
${color ff9730}${swapbar 6}$color
${color 80d62b}Info HDD Memory${hr 1}$color
${color ff9730}System:  ${fs_free /}  ${alignr} ${fs_used /} / ${fs_size /}
${fs_bar 6 /}$color
${color ff9730}Home:      ${fs_free /home} ${alignr}  ${fs_used /home} / ${fs_size /home}
${fs_bar 6 /media/Data}$color
${color ff9730}Windows:      ${fs_free /media/sda2} ${alignr}  ${fs_used /media/sda2} / ${fs_size /media/sda2}
${fs_bar 6 /media/extData}$color
${color 80d62b}PROCESSES ${hr 1}$color
${color ff9730}Total: $processes ${alignr}Running: $running_processes
${color 80d62b}WI-FI ${hr 1}$color
${color ff9730}IP addres:${alignr}${addr eth1}
${color ff9730}Down: ${color 80d62b} ${downspeed eth1} ${color ff9730} KiB/s ${alignr} Up: ${color 80d62b}${upspeed eth1}${color ff9730} KiB/s
${color ff9730}Down: ${totaldown eth1} ${alignr}Up:  ${totalup eth1}
${downspeedgraph eth1 30,110 ff841f 80d62b} ${alignr}${upspeedgraph eth1 30,110 ff841f 80d62b}
${color 80d62b}CABLE ${hr 1}$color
${color ff9730}IP addres:${alignr}${addr eth0}
${color ff9730}Down: ${color 80d62b} ${downspeed eth0} ${color ff9730} KiB/s ${alignr} Up: ${color 80d62b}${upspeed eth0}${color ff9730} KiB/s
${color ff9730}Down: ${totaldown eth0} ${alignr}Up:  ${totalup eth0}
${downspeedgraph eth0 30,110 ff841f 80d62b} ${alignr}${upspeedgraph eth0 30,110 ff841f 80d62b}Zatim si stim hraju prvni den, tak uvidime. Taky omluvte ten bordel na plose, jeste sem nestihl uklidit.

Propo, jak tam pracuje to oznamovani o novem mailu???

[Cepela]

Tak stim prekryvanim oken po startu uz sem si taky pomohl sam, kdyz se k tomu nikdo nemel. Zadal sem totiz do automatickeho spusteni misto linku na vytvoreny spoustec prikaz conky a tudiz se to spoustelo bez toho opozdeni po startu. Ja se snad s tim tucnakem nakonec i naucim. 

[karel kudrna]

hezký to máš, už ti to jde.

[Zelvuska]

Zdravim!
Snad jsem to prosel dost peclive a nebudu se tedy s dotazem opakovat. Kdyztak se omlouvam.
Chtel bych do conek dostat teplotu procesoru (konkretne C2D). Acpitemp nefunguje (ukazuje 0) a pres lmsensors se k tomu nemuzu nejak dostat... Nize prikladam vypis ze sensors. Dale by me zajimalo, jestli nekdo netusi co je to Temp 2. Temp 1 by mela byt deska, ale tu dvojku netusim.

Kód: [Vybrat]

it8718-isa-0290
Adapter: ISA adapter
in0:       +1.28 V  (min =  +0.00 V, max =  +4.08 V)   
in1:       +1.87 V  (min =  +0.00 V, max =  +4.08 V)   
in2:       +3.23 V  (min =  +0.00 V, max =  +4.08 V)   
in3:       +2.88 V  (min =  +0.00 V, max =  +4.08 V)   
in4:       +0.54 V  (min =  +0.00 V, max =  +4.08 V)   
in5:       +0.00 V  (min =  +0.00 V, max =  +4.08 V)   ALARM
in6:       +0.06 V  (min =  +0.00 V, max =  +4.08 V)   
in7:       +3.07 V  (min =  +0.00 V, max =  +4.08 V)   
in8:       +3.15 V
fan1:      690 RPM  (min =    0 RPM)                   
fan2:      953 RPM  (min =    0 RPM)                   
fan3:        0 RPM  (min =    0 RPM)                   
temp1:       +47°C  (low  =  +127°C, high =  +127°C)   sensor = thermistor   
temp2:       +39°C  (low  =  +127°C, high =   +70°C)   sensor = diode   
temp3:        -2°C  (low  =  +127°C, high =  +127°C)   sensor = thermistor   
vid:      +0.000 V

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +43°C  (high =   +85°C)                   

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +43°C  (high =   +85°C)                   

Jeste jeden dotaz: Jak zadat do conky cestu, ktera obsahuje mezery? Karta v telefonu se mi totiz pripojuje jako PHONE CARD a nemuzu to tam zadat. Uvozovky to nebere a lomitko taky neslo. Jen jeste pro upresneni v mtab je to dokonce jako /media/PHONE\040CARD, takze tomu moc nerozumim.

Dekuju za rady a pokud uz to tu nekde je, tak se omlouvam.

[karel kudrna]

to s tou teplotou řeším už chvíli, ale trochu jsem se zasek. acpitemp nefunguje, když nejede acpi, takže notebookáři jedou, ostatní ne.tak snad dneska...

[mafrk]

Tak se taky pochlubím               - s připojenou flaškou a spuštěným amarokem
    

Kód: [Vybrat]

stippled_borders 0
border_margin 6
border_width 1
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
double_buffer yes
use_spacer no
use_xft yes
update_interval 5.0
minimum_size 200 50
draw_shades no
draw_outline no
draw_borders no
xftfont Sans bold:size=9
uppercase no
default_color 0000cd
alignment top_right
gap_x 10
gap_y 40

TEXT
${alignc}${color black}- - - - - - ${color darkblue}Systém ${color black}- - - - - -
${font Sans bold:size=7}${alignc}${color 1e90ff}$sysname-$kernel-$machine
${alignc}${color black}- - - - - -${color darkblue} Datum - čas ${color black}- - - - - -
${font Sans bold:size=12}${alignc}${color 1e90ff}${time %e %B %G}
${font Sans bold:size=16}${alignc}${color 1e90ff}${time %H:%M:%S}${font Sans bold:size=7}
${alignc}${color black}- - - - - -${color darkblue} Doba běhu ${color black}- - - - - -
${alignc}${color 1e90ff}$uptime
${alignc}${color black}- - - - - -${color darkblue} CPU ${color black}- - - - - -
${alignc}${color}1-CPU ${color 1e90ff}${cpu cpu0}%    ${color 1e90ff}${freq_g cpu1}${color}GHz
${alignc}${color}2-CPU ${color 1e90ff}${cpu cpu1}%    ${color 1e90ff}${freq_g cpu2}${color}GHz
${color}${cpugraph cpu0 20,100 000000 ffffff}${alignr}${cpugraph cpu1 20,100 000000 ffffff}
${alignc}${color black}- - - - - - ${color darkblue}Procesy${color black}- - - - - -
${color}Total: ${color 1e90ff}$processes ${color}${alignr}Running:${color 1e90ff} $running_processes
${color 1e90ff}${top name 1}      ${alignr} ${top_mem cpu 1}
${color}${top name 2}      ${alignr} ${top cpu 2}
${color}${top name 3}      ${alignr} ${top cpu 3}
${color}${top name 4}      ${alignr} ${top cpu 4}
${alignc}${color black}- - - - - -${color darkblue} Paměť ${color black}- - - - - -
${color 1e90ff}${top_mem name 1}${alignr}${top_mem mem 1}
${color}${top_mem name 2}${alignr}${top_mem mem 2}
${color}${top_mem name 3}${alignr}${top_mem mem 3}
${color}${top_mem name 4}${alignr}${top_mem mem 4}
${alignc}${color black}- - - - - -${color darkblue} Paměť/Swap ${color black}- - - - - -
${color}RAM: ${color 1e90ff}$mem${alignr}${color}max: ${color 1e90ff}$memmax
${color}${membar 6}
${color}Swap: ${color 1e90ff}$swap${alignr}${color}max: ${color 1e90ff}2.00GiB
${color}${swapbar 6}
${alignc}${color black}- - - - - -${color darkblue} HDD / ${color black}- - - - - -
${color}Zbývá:${alignr}${fs_free /}
${color 1e90ff}${fs_used_perc /}%${alignr}${fs_free_perc /}%
${color}${fs_bar 6 /}
${alignc}${color black}- - - - - -${color darkblue} HDD /home ${color black}- - - - - -
${color}Zbývá:${alignr}${fs_free /home}
${color 1e90ff}${fs_used_perc /home}%${alignr}${fs_free_perc /home}%
${color}${fs_bar 6 /home}
${if_mounted /media/disk}${alignc}${color black}- - - - - -${color darkblue} Flash ${color black}- - - - - -
${color}Celkem:${alignr}${fs_size /media/disk/}
${color}Volno:${alignr}${fs_free /media/disk/}
${color 1e90ff}${fs_used_perc /media/disk/}%  ${alignr}${fs_free_perc /media/disk/}%
${color}${fs_bar /media/disk/}$endif
${alignc}${color black}- - - - - -${color darkblue} Síť ${color black}- - - - - -
${color}Přícozí: ${color 1e90ff}${downspeed eth0}${color}KB ${alignr}${color} Odchozí: ${color 1e90ff}${upspeed eth0}${color}KB
${color}Přijato ${totaldown eth0}${alignr}${color}Odesláno ${totalup eth0}
${downspeedgraph eth0 20,90 000000 ffffff} ${alignr}${upspeedgraph eth0 20,90 000000 ffffff}
${alignc}${color black}- - - - - - ${color darkblue}Porty a Spojení${color black} - - - - - -
${color}Příchozí: ${color 1e90ff}${tcp_portmon 1 42768 count}${color}${alignr}Odchozí: ${color 1e90ff}${tcp_portmon 32768 61000 count}
${color}Příchozí spojení ${alignr}Port
 ${color 1e90ff}${tcp_portmon 1 42768 rhost 0}${alignr}${tcp_portmon 1 42768 lservice 0}
  ${color 1e90ff}${tcp_portmon 1 42768 rhost 1}${alignr}${tcp_portmon 1 42768 lservice 1}
   ${color 1e90ff}${tcp_portmon 1 42768 rhost 2}${alignr}${tcp_portmon 1 42768 lservice 2}
${color}Odchozí spojení ${alignr} Služby/Porty
 ${color 1e90ff}${tcp_portmon 32768 65535 rhost 0}${alignr}${tcp_portmon 32768 65535 rservice 0}
  ${color 1e90ff}${tcp_portmon 32768 65535 rhost 1}${alignr}${tcp_portmon 32768 65535 rservice 1}
   ${color 1e90ff}${tcp_portmon 32768 65535 rhost 2}${alignr}${tcp_portmon 32768 65535 rservice 2}
${if_running amarokapp}${alignc}${color black}- - - - - - ${color darkblue}Amarok${color black} - - - - - -
${font Sans bold:size=6}${color white}${alignc}${execi 5 ~/.conky/amarok artist}
${alignc}${execi 5 ~/.conky/amarok title}
${execibar 1 ~/.conky/amarok progress}
${alignc}${execi 5 ~/.conky/amarok year} - ${color white}${alignc}${execi 10 ~/.conky/amarok genre}
${color}Sbírka info${font Sans bold:size=7}
${color}Sbírek: ${color 1e90ff}${execi 60 ~/.conky/amarok totalCompilations}${color}${alignc}Alb: ${color 1e90ff}${execi 60 ~/.conky/amarok totalAlbums}${alignr}${color}Žánrů: ${color 1e90ff}${execi 60 ~/.conky/amarok totalGenres}
${color}Interpretů: ${color 1e90ff}${execi 60 ~/.conky/amarok totalArtists}${alignr}${color}Stop: ${color 1e90ff}${execi 60 ~/.conky/amarok totalTracks}

${color}Nejčastější ve sbírkách
${color}Inerpret: ${color 1e90ff}${execi 10 ~/.conky/amarok most_songs_by_artist}${alignr}${execi 10 ~/.conky/amarok most_songs_by_artist_n}
${color}Žánr: ${color 1e90ff}${execi 10 ~/.conky/amarok most_songs_are_genre}${alignr}${execi 10 ~/.conky/amarok most_songs_are_genre_n}

${color}Alba: ${color 1e90ff}${execi 10 ~/.conky/amarok most_albums_by_artist}${alignr}${execi 10 ~/.conky/amarok most_albums_by_artist_n}
${color}Žánr: ${color 1e90ff}${execi 10 ~/.conky/amarok most_albums_are_genre}${alignr}${execi 10 ~/.conky/amarok most_albums_are_genre_n}$endif

[p.dohny]

Přidávám též svůj výtvor:

Kód: [Vybrat]

own_window yes
own_window_type override
own_window_transparent no
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

double_buffer yes

use_spacer no
use_xft yes

update_interval 1.0

maximum_size 150 5

draw_shades no

draw_outline no
draw_borders no


xftfont ae_AlMothnna:size=5

uppercase no

default_color ff9730

alignment bottom_right

gap_x 5
gap_y 30

TEXT
${color 80d62b}Procesor ${hr 1}
${color ff9730} CPU1: ${cpu cpu0}% ${alignr} CPU2: ${cpu cpu1}% 
${cpubar cpu0 10,110} ${alignr} ${cpubar cpu0 10,110}
${cpugraph cpu0 30,110 ff841f 80d62b } ${alignr} ${cpugraph cpu1 30,110 ff841f 80d62b}
CPU Temp: ${acpitemp}C
${color 80d62b}Bezici procesy${hr 1}
${color 80d62b}Name               ${alignr}     CPU%
${color ff9730}${top name 1}      ${alignr} ${top cpu 1}
${color ff9730}${top name 2}      ${alignr} ${top cpu 2}
${color 80d62b}Pocitac je zapnut ${hr 1} $color
${color ff9730}${alignc} $uptime
${color 80d62b}MEMORY / SWAP ${hr 1}
${color ff9730}RAM: ${alignc}  $mem ${alignr}  max: $memmax
${color ff9730}${membar 6}$color
${color ff9730}Swap: ${alignc} $swap  ${alignr}  max: $swapmax
${color ff9730}${swapbar 6}$color
${color 80d62b}Info HDD Memory${hr 1}$color
${color ff9730}System:  ${fs_free /}  ${alignr} ${fs_used /} / ${fs_size /}
${fs_bar 6 /}$color
${color 80d62b}LAN ${hr 1}$color
${color ff9730}IP addres:${alignr}${addr eth0}
${color ff9730}Down: ${color 80d62b} ${downspeed eth0} ${color ff9730} KiB/s ${alignr} Up: ${color 80d62b}${upspeed eth0}${color ff9730} KiB/s
${color ff9730}Down: ${totaldown eth0} ${alignr}Up:  ${totalup eth0}
${downspeedgraph eth0 30,110 ff841f 80d62b} ${alignr}${upspeedgraph eth0 30,110 ff841f 80d62b}
${color 80d62b}WI-FI ${hr 1}$color
${color ff9730}IP addres:${alignr}${addr eth1}
${color ff9730}Down: ${color 80d62b} ${downspeed eth1} ${color ff9730} KiB/s ${alignr} Up: ${color 80d62b}${upspeed eth1}${color ff9730} KiB/s
${color ff9730}Down: ${totaldown eth1} ${alignr}Up:  ${totalup eth1}
${downspeedgraph eth1 30,110 ff841f 80d62b} ${alignr}${upspeedgraph eth1 30,110 ff841f 80d62b}

[attachment deleted by admin]

[Zelvuska]

to s tou teplotou řeším už chvíli, ale trochu jsem se zasek. acpitemp nefunguje, když nejede acpi, takže notebookáři jedou, ostatní ne.tak snad dneska...

Tak jsem na to konecne prisel! Teda neni to muj napad, ale nasel sem to na nejakem foru. Stacila tahle jednoducha syntaxe:

Core 1: ${execi 1 sensors | grep "Core 0" | cut -c15-18}C ${alignr}Core 2: ${execi 1 sensors | grep "Core 1" | cut -c15-18}C

[Pavlinaxx]

Jeste jeden dotaz: Jak zadat do conky cestu, ktera obsahuje mezery? Karta v telefonu se mi totiz pripojuje jako PHONE CARD a nemuzu to tam zadat. Uvozovky to nebere a lomitko taky neslo. Jen jeste pro upresneni v mtab je to dokonce jako /media/PHONE\040CARD, takze tomu moc nerozumim.

Dekuju za rady a pokud uz to tu nekde je, tak se omlouvam.

Nevím to teď jistě ale mám pocit,že obrácené lomítko se používá místo mezery

[karel kudrna]

Zelvuska: to už jsem zkoušel ,ale u mě to nezabralo...našel jsem návod jak rozchodit acpi snadno a rychle, tak se o to dneska pokusím

[Zelvuska]

Nevím to teď jistě ale mám pocit,že obrácené lomítko se používá místo mezery

Jojo, to uz jsem taky rozchodil, ale on byl problem v tom, ze v mtab to bylo jako "PHONE\040CARD" a kdyz jsem mel prikaz if_mounted, tak to jenom se zpetnym lomitkem nefungovalo, tam to chtelo i to 040, ale zase ve velikostech to nebehalo, takze sem to musel naroubovat.
Konecny vysledek je, ze v if_mounted to mam s tim "\040" a v fs_free (a podobnych) to mam "\ ".

Ale dekuju za rady

[kotz]

Zatím nic neukážu , spuštění mi skončí chybou

Kód: [Vybrat]

/proc/i8k doesn't exist! use insmod to make sure the kernel driver is loaded...Nevíte co s tím?
Grafiku mám intel a Compiz nepoužívám.

[karel kudrna]

i8k je na měření teploty?