neslobodny 3D ovladac grafiky nvidia a rozlisenie obrazu

[rolo]

mam dalsi problem, s ktorym su uz ale poradit neviem.

po instalacii neslobodneho ovladaca 3D akceleratora nvidia sa mi neda nastavit ine rozlisenie obrazu ako max 640x480 a obnovovacia frekvencia max 55Hz. pritom povodne slo uplne v pohode 1024x768 a 85Hz (monitor Belinea).

skusal som menit ovladace, ale ziadna zmena... ;-(

rolo

[donny]

Použijte klávesovou zkratku Alt-F2 k vyvolání spouštěcího dialogu. Pokud používáte Ubuntu, zadejte gksudo nvidia-settings, pokud pouzivate Kubuntu, správný příkaz je kdesu nvidia-settings.

V sekci X Server Display Configuration si vyberte požadované rozlišení, nezapomeňte poté stisknout tlačítko Save to X Configuration File (aby se nastavení uložilo) a samozřejmě Apply, aby se změny hned projevily.

[rolo]

ahoj,

problem je, ze mi uvadza, ze monitor je maxdata a aj tak je tam max rozlisenie 640x480, naviac je iba moznost auto.

okrem toho sa nemozem dostat na dolnu cast okien, pretoze mi ich zobrazuje mimo plochu a neda sa nascrolovat.

skusam si nainstalovat nove ovladace nvidia z ich stranky, po zadani prikazu sh NVIDIA-Linux-x86-171.06-pkg1.run chce odo mna, ze potrebuje byt prihlaseny ako root, zatial neviem ako to urobit...

rolo

[donny]

pokud potrebujete spustit prikaz jako root, staci, kdyz pred prikazem uvedete kouzelne sluvko sudo. Vizte http://wiki.ubuntu.cz/Root%20sudo

Pokud chcete posunout okno, melo by to jit tak, ze stisknete Alt a pak kliknete nekam do okna a "pretahnete" ho.

[rolo]

tak som zistil, ze s tou instalaciou noveho ovladaca nie je az taka sranda...

na nvidia strankach je sice i navod pre uplnych zaciatocnikov, je ale univerzalny pre linuxy obecne. ako konkretne teda treba postupovat pri kubuntu (napr s tym vypnutim x serveru, opengl, atd)?

dakujem

rolo

[donny]

V repozitari najdete aktulani ovladace, nemusite je instalovat ze stranek vyrobce, akorat si zbytecne pridelavate praci.

Edit: a bavime se o stejnem nastavovacim okne (na obr. je rozbalene menu Resolution)?

[rolo]

tak sa mi podarilo nastavit rozlisenie 1024x768, ale frekvencia je max 60hz (to blikanie je hodne neprijemne). taktiez v nastaveni monitoru cez Nastaveni systemu -> Monitor&Display sa ovladac zmenil na nv a monitor spat na Maxdata (povodne som nastavoval ovladac geforce series 6 a monitor belinea 10 20 30).

dalsi problem je pri startovacej obrazovke ubuntu - tri stvrtiny obrazu proste nevidim, su mimo monitor. vidim len pravu hornu stvrtinu, co je v podstate modra obrazovka a cast prihlasovacieho okna... 

rolo

[donny]

spusťte přes alt-F2 kdesu kate /etc/X11/xorg.conf (doufám, že jsem se trefil do názvu souboru) a pošlete mi sem jeho výpis.

[rolo]

(oprava k predch sprave - lavu hornu stvrtinu obrazu, nie pravu. sorry)

tak tu je ten vypis:

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder3)  Wed Sep 12 14:30:30 PDT 2007

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

   # Uncomment if you have a wacom tablet
   #   InputDevice     "stylus"   "SendCoreEvents"
   #   InputDevice     "cursor"   "SendCoreEvents"
   #   InputDevice     "eraser"   "SendCoreEvents"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
    Load           "v4l"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "cz"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/input/wacom"
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Obecný monitor"
    VendorName     "Plug 'n' Play"
    ModelName      "Plug 'n' Play"
    Gamma           1
    ModeLine       "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection

Section "Monitor"
    Identifier     "monitor1"
    VendorName     "Plug 'n' Play"
    ModelName      "Plug 'n' Play"
    Gamma           1
    ModeLine       "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Maxdata (RogenTech)"
    HorizSync       31.5 - 53.7
    VertRefresh     56.0 - 85.0
    Gamma           1
    ModeLine       "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine       "640x480@72" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
    ModeLine       "640x480@75" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    ModeLine       "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "832x624@75" 57.3 832 864 928 1152 624 625 628 667 -hsync -vsync
    ModeLine       "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    ModeLine       "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
    ModeLine       "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
    ModeLine       "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    ModeLine       "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine       "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
    ModeLine       "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    ModeLine       "1280x960@75" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    ModeLine       "1400x1050@60" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    ModeLine       "1400x1050@75" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    ModeLine       "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    ModeLine       "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
EndSection

Section "Device"
    Identifier     "nVidia Corporation NV44A [GeForce 6200]"
    Driver         "nvidia"
    VendorName     "NVIDIA"
    BoardName      "NVIDIA GeForce 6800 (generic)"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"
    Identifier     "device1"
    Driver         "nvidia"
    VendorName     "NVIDIA"
    BoardName      "NVIDIA GeForce 6 Series"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 6200"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "nVidia Corporation NV44A [GeForce 6200]"
    Monitor        "Obecný monitor"
    DefaultDepth    24
    SubSection     "Display"
        Virtual     640 480
        Depth       24
        Modes      "640x480@60"
    EndSubSection
EndSection

Section "Screen"

   #         
    Identifier     "screen1"
    Device         "device1"
    Monitor        "monitor1"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "640x480@60"
    EndSubSection
EndSection

Section "Screen"

   # Removed Option "metamodes" "640x480_85 +0+0; 640x480@60 +0+0"
# Removed Option "metamodes" "640x480_85 +0+0; 1024x768 +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1024x768 +0+0; 640x480_85 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

[donny]

ještě potřebuju přesný název a typ monitoru

[rolo]

monitor:

Belinea, model no. 10 20 30 (vyrobca Maxdata)

[Pepe999]

Ted jsem zrovna psal vedle do vlakna.
Postup:
1. stahnout ovladace: http://www.nvidia.com/object/linux_display_ia32_169.12.html
2. odinstaluj nvidia-glx-new(ja to udelal)
3. restart a nasledne zvol recovery mode a na konci zadej heslo pro root, cimz se dostanes do terminalu(spis prikazovej radek) s pravy roota.
4. cd /home/adresar s nvidia driverem...
5. sh NVIDIA(stiskni TAB hned pri prvnim pismenku, pokud je spravne, doplni se celej nazev souboru)
6. enter a postupuj podle instrukci...
Takto jsem dnes nainstalil vyse uvedeny ovladac pro nVidia Go 7300 a je zda se plne funkcni, vcetne nvidia-settings v aplikacich/system tools
Mam sice taky max 60Hz, ale rozliseni 1280x800, ktere je pro tento monitor(Seiko na laptopu) maximalni..

[rolo]

ahoj,

tak som postupoval podla tohto navodu a zlyhalo mi to na tom, ze mu chyba nieco u kernelu (libc header)... 

samozrejme mi teraz nejde kubuntu nabootovat ani v normalnom mode, len cez cd.

co s tym?

rolo

[rolo]

na http://us.download.nvidia.com/XFree86/Linux-x86/169.12/README/chapter-04-section-03.html som nasiel:

Installing the Kernel Interface
The NVIDIA kernel module has a kernel interface layer that must be compiled specifically for each kernel. NVIDIA distributes the source code to this kernel interface layer, as well as precompiled versions for many of the kernels provided by popular Linux distributions.
When the installer is run, it will determine if it has a precompiled kernel interface for the kernel you are running. If it does not have one, it will check if there is one on the NVIDIA FTP site (assuming you have an Internet connection), and download it. If one cannot be downloaded, either because the FTP site cannot be reached or because one is not provided, the installer will check your system for the required kernel sources and compile the interface for you. You must have the source code for your kernel installed for compilation to work. On most systems, this means that you will need to locate and install the correct kernel-source, kernel-headers, or kernel-devel package; on some distributions, no additional packages are required (e.g. Fedora Core 3, Red Hat Enterprise Linux 4).
After the correct kernel interface has been identified (either included in the .run file, downloaded, or compiled from source code), the kernel interface will be linked with the closed-source portion of the NVIDIA kernel module. This requires that you have a linker installed on your system. The linker, usually /usr/bin/ld, is part of the binutils package. You must have a linker installed prior to installing the NVIDIA driver.

podla vsetkeho musim urobit tu zvyraznenu cast.

ako?

rolo

[qUAKER]

spusť příkaz

sudo apt-get install linux-headers-generic

a pak zopakuj postup.

[Pepe999]

na http://us.download.nvidia.com/XFree86/Linux-x86/169.12/README/chapter-04-section-03.html som nasiel:

Installing the Kernel Interface
The NVIDIA kernel module has a kernel interface layer that must be compiled specifically for each kernel. NVIDIA distributes the source code to this kernel interface layer, as well as precompiled versions for many of the kernels provided by popular Linux distributions.
When the installer is run, it will determine if it has a precompiled kernel interface for the kernel you are running. If it does not have one, it will check if there is one on the NVIDIA FTP site (assuming you have an Internet connection), and download it. If one cannot be downloaded, either because the FTP site cannot be reached or because one is not provided, the installer will check your system for the required kernel sources and compile the interface for you. You must have the source code for your kernel installed for compilation to work. On most systems, this means that you will need to locate and install the correct kernel-source, kernel-headers, or kernel-devel package; on some distributions, no additional packages are required (e.g. Fedora Core 3, Red Hat Enterprise Linux 4).
After the correct kernel interface has been identified (either included in the .run file, downloaded, or compiled from source code), the kernel interface will be linked with the closed-source portion of the NVIDIA kernel module. This requires that you have a linker installed on your system. The linker, usually /usr/bin/ld, is part of the binutils package. You must have a linker installed prior to installing the NVIDIA driver.

podla vsetkeho musim urobit tu zvyraznenu cast.

ako?

rolo

Co znamena ze nemuzu nabootovat?? Pokud je problem s driverem, system by mel normalne nabehnout i bez neho v low graphics mode. Kdyz budes v live cd, tak smaz v grubu systemu "splash" na konci u kernelu, kterej ma bootovat. Tim system bude startovat v textovym rezimu a uvidis, kde je problem. Co se tyce te zvyraznene hlasky, tak linux-headers bys mel mit asi nainstalovane a ten kernel-devel-package jsem nemel a nemam a funguje to. Nicmene bych zkusil po uspesnem bootu reinstall linux-headers a zkusil znova..

[rolo]

tak uz mi to bootuje...

ale - ten driver sa stale neda nainstalovat, stale pise ze mu ten spravny kernel ci header chyba a nemoze pokracovat (automaticky download nenajde to co potrebuje)

skusal som (re)instal linux-headers-generic, pise ale ze tie su v poriadku nainstalovane

tak neviem...

[Marek_]

co linux-restricted-modules?

[rolo]

stale nefunguje...

takto vypada log z nvidia-installer.log:

/nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Wed Apr 16 11:16:48 2008

option status:
  license pre-accepted    : false
  update                  : false
  force update            : false
  expert                  : false
  uninstall               : false
  driver info             : false
  precompiled interfaces  : true
  no ncurses color        : false
  query latest version    : false
  OpenGL header files     : true
  no questions            : false
  silent                  : false
  no recursion            : false
  no backup               : false
  kernel module only      : false
  sanity                  : false
  add this kernel         : false
  no runlevel check       : false
  no network              : false
  no ABI note             : false
  no RPMs                 : false
  no kernel module        : false
  force SELinux           : default
  no X server check       : false
  force tls               : (not specified)
  X install prefix        : (not specified)
  X library install path  : (not specified)
  X module install path   : (not specified)
  OpenGL install prefix   : (not specified)
  OpenGL install libdir   : (not specified)
  utility install prefix  : (not specified)
  utility install libdir  : (not specified)
  doc install prefix      : (not specified)
  kernel name             : (not specified)
  kernel include path     : (not specified)
  kernel source path      : (not specified)
  kernel output path      : (not specified)
  kernel install path     : (not specified)
  proc mount point        : /proc
  ui                      : (not specified)
  tmpdir                  : /tmp
  ftp mirror              : ftp://download.nvidia.com
  RPM file list           : (not specified)

Using: nvidia-installer ncurses user interface
-> You appear to be running in runlevel 1; this may cause problems.  For exampl
   e: some distributions that use devfs do not run the devfs daemon in runlevel
   1, making it difficult for `nvidia-installer` to correctly setup the kernel
   module configuration files.  It is recommended that you quit installation no
   w and switch to runlevel 3 (`telinit 3`) before installing.
   
   Quit installation now? (select 'No' to continue installation) (Answer: No)
-> License accepted.
-> No precompiled kernel interface was found to match your kernel; would you li
   ke the installer to attempt to download a kernel interface for your kernel f
   rom the NVIDIA ftp site (ftp://download.nvidia.com)? (Answer: Yes)
-> No matching precompiled kernel interface was found on the NVIDIA ftp site;
   this means that the installer will need to compile a kernel interface for
   your kernel.
ERROR: You do not appear to have libc header files installed on your system.
       Please install your distribution's libc development package.
ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find suggestions
       on fixing installation problems in the README available on the Linux
       driver download page at www.nvidia.com.

rolo

[Pepe999]

Hmm, to se mi nechce verit, ze nefunguje restricted driver a ani nejdou nainstalovat originalni ovladace. Jeste 8 dni a zkusil bych Hardyho, treba s vyssim kernelem problem nebude...

[qUAKER]

podle celý hlášky vím kde je problém

musíš nainstalovat balík linux-libc-dev