Autor Téma: Enemy Territory-opengl, pomalost (Přečteno 3599 krát)

comgen · « **kdy:** 19 Července 2006, 17:37:29 »

Spustim "et" , ihned spadne, hlasi

musim napsat+set r_allowSoftwareGL 1
***********************************************************
You are using software Mesa (no hardware acceleration)!
Driver DLL used: libGL.so.1
If this is intentional, add
"+set r_allowSoftwareGL 1"
to the command line when starting the game.
***********************************************************
pak se to spusti, ale nemožně se to seká...

Nevíte co s tim? Na ub5.10 to fachalo ok...

nikola · « **Odpověď #1 kdy:** 19 Července 2006, 17:58:39 »

Nainstalovat ovladač pro grafickou kartu.

comgen · « **Odpověď #2 kdy:** 19 Července 2006, 20:32:18 »

pri instalaci ovladace to chce:
save your X config file and run aticonfig....

Jak to mam uložit?

comgen · « **Odpověď #3 kdy:** 19 Července 2006, 21:40:33 »

nainstalovano a nic se nezmenilo..

nikola · « **Odpověď #4 kdy:** 19 Července 2006, 22:30:00 »

Zkus sem hodit obsah souboru xorg.conf, třeba na něco přijdeme. Jinak nějaké postupy instalace jsou tady: http://wiki.ubuntu.cz/Grafick%C3%A9_karty_ATI?highlight=%28ati%29

comgen · « **Odpověď #5 kdy:** 19 Července 2006, 23:19:27 »

Section "ServerLayout"
   Identifier "Default Layout"
   Screen 0 "aticonfig-Screen[0]" 0 0
   InputDevice "Generic Keyboard"
   InputDevice "Configured Mouse"
   InputDevice "stylus" "SendCoreEvents"
   InputDevice "cursor" "SendCoreEvents"
   InputDevice "eraser" "SendCoreEvents"
EndSection

Section "Files"

   # path to defoma fonts
   FontPath "/usr/share/X11/fonts/misc"
   FontPath "/usr/share/X11/fonts/cyrillic"
   FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
   FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
   FontPath "/usr/share/X11/fonts/Type1"
   FontPath "/usr/share/X11/fonts/100dpi"
   FontPath "/usr/share/X11/fonts/75dpi"
   FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
   Load "i2c"
   Load "bitmap"
   Load "ddc"
   Load "dri"
   Load "extmod"
   Load "freetype"
   Load "glx"
   Load "int10"
   Load "type1"
   Load "vbe"
EndSection

Section "InputDevice"
   Identifier "Generic Keyboard"
   Driver "kbd"
   Option    "CoreKeyboard"
   Option    "XkbRules" "xorg"
   Option    "XkbModel" "pc105"
   Option    "XkbLayout" "cz"
EndSection

Section "InputDevice"
   Identifier "Configured Mouse"
   Driver "mouse"
   Option    "CorePointer"
   Option    "Device" "/dev/input/mice"
   Option    "Protocol" "ExplorerPS/2"
   Option    "ZAxisMapping" "4 5"
   Option    "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
   Identifier "stylus"
   Driver "wacom"
   Option    "Device" "/dev/wacom" # Change to
   Option    "Type" "stylus"
   Option    "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
   Identifier "eraser"
   Driver "wacom"
   Option    "Device" "/dev/wacom" # Change to
   Option    "Type" "eraser"
   Option    "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

# /dev/input/event
# for USB
   Identifier "cursor"
   Driver "wacom"
   Option    "Device" "/dev/wacom" # Change to
   Option    "Type" "cursor"
   Option    "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
   Identifier "Generic Monitor"
   Option    "DPMS"
EndSection

Section "Monitor"
   Identifier "aticonfig-Monitor[0]"
   Option    "VendorName" "ATI Proprietary Driver"
   Option    "ModelName" "Generic Autodetecting Monitor"
   Option    "DPMS" "true"
EndSection

Section "Device"
   Identifier "ATI Technologies, Inc. RV280 [Radeon 9200 SE]"
   Driver "ati"
   BusID "PCI:2:0:0"
EndSection

Section "Device"
   Identifier "aticonfig-Device[0]"
   Driver "fglrx"
   Option    "VideoOverlay" "on"
   Option    "OpenGLOverlay" "off"
EndSection

Section "Screen"
   Identifier "Default Screen"
   Device "ATI Technologies, Inc. RV280 [Radeon 9200 SE]"
   Monitor "Generic Monitor"
   DefaultDepth 24
   SubSection "Display"
      Depth 1
      Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "1x1"
   EndSubSection
   SubSection "Display"
      Depth 4
      Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "1x1"
   EndSubSection
   SubSection "Display"
      Depth 8
      Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "1x1"
   EndSubSection
   SubSection "Display"
      Depth 15
      Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "1x1"
   EndSubSection
   SubSection "Display"
      Depth 16
      Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "1x1"
   EndSubSection
   SubSection "Display"
      Depth 24
      Modes "1280x1024" "1024x768" "832x624" "800x600" "640x480" "1x1"
   EndSubSection
EndSection

Section "Screen"
   Identifier "aticonfig-Screen[0]"
   Device "aticonfig-Device[0]"
   Monitor "aticonfig-Monitor[0]"
   DefaultDepth 24
   SubSection "Display"
      Viewport 0 0
      Depth 24
   EndSubSection
EndSection

Section "DRI"
   Mode 0666
EndSection

nikola · « **Odpověď #6 kdy:** 20 Července 2006, 10:08:50 »

Máš tam nějakej zmatek - 2x Section"Device", jednou s ovladačem fglrx a jednou ati. Zkus to upravit asi takhle (jednu sekci zakomentuj)

Kód: [Vybrat]

Section "Monitor"
    Identifier   "Generic Monitor"
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

#Section "Device"
#   Identifier  "ATI Technologies, Inc. RV280 [Radeon 9200 SE]"
#  Driver      "ati"
#    BusID       "PCI:2:0:0"
#EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]"
    Driver      "fglrx"
    BusID       "PCI:2:0:0"
    Option        "VideoOverlay" "on"
    Option        "OpenGLOverlay" "off"
EndSection

Jestli máš Kubuntu, jde to nastavit i přes klikátko v "Nastavení systému"

comgen · « **Odpověď #7 kdy:** 20 Července 2006, 12:01:51 »

nene, pak mi na tom neco nefungovalo

nikola · « **Odpověď #8 kdy:** 20 Července 2006, 12:13:07 »

Nemůžeš tam mít oba drivery, to bys musel mít 2 karty. Překopíroval jsi BusID? Driver je jeden, akorát pro 2 monitory. Ještě bych zkusil zakomentovat první sekci "Monitor". A nebo jednodušeji

Kód: [Vybrat]

sudo dpkg-reconfigure xserver-xorgJako ovladač zvol fglrx, měl by se vygenerovat nový xorg.conf (ten starý si raději zazálohuj).

comgen · « **Odpověď #9 kdy:** 20 Července 2006, 16:24:25 »

sudo dpkg-reconfigure xserver-xorg

Když mě to vždycky spadne po nastaveni monitoru..

Robert · « **Odpověď #10 kdy:** 21 Července 2006, 08:17:15 »

správný postup je napsán je na wiki, v návodech pro instalaci binárního ovladače (fglrx) pro karty ati.

Newkiller · « **Odpověď #11 kdy:** 23 Července 2006, 20:13:48 »

skus spustit aticonfig

Flux$ · « **Odpověď #12 kdy:** 13 Srpna 2006, 12:11:20 »

Nainstaluj patch ET pak to pojede normalne .

http://wiki.ubuntu.cz/Enemy_Territory

install patch

Kód: [Vybrat]

wget -c http://ftp.games.skynet.be/pub/wolfenstein/et-linux-2.60-update.x86.run

cd    /home/a kde je stazenej patch

sudo sh ./et-linux-2.60-update.x86.run

:O

Autor Téma: Enemy Territory-opengl, pomalost (Přečteno 3599 krát)

Newkiller