Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Potřebuju pomoc s postfixem. [vyřešeno]  (Přečteno 3477 krát)

bamboo

  • Návštěvník
  • Příspěvků: 4
Potřebuju pomoc s postfixem. [vyřešeno]
« kdy: 01 Února 2009, 00:48:15 »
Čau,

mám problém s postfixem, řešil jsem ho 2 dny ale spíš jsem to zhoršil. Jedná se o toto:

Potřebuji nastavit SASL na SMTP, jenom jméno a heslo (nemusí být TLS) Potřebuji abych mohl z jakékoliv adresy posílat cokoliv kamkoliv. Jediná překážka aby byla jméno a heslo.

Moje nastavení:

master.cf:

Kód: [Vybrat]
#
# Postfix master process configuration file.  For details on the format
# of the file, see the master(5) manual page (command: "man 5 master").
#
# Do not forget to execute "postfix reload" after editing this file.
#
# ==========================================================================
# service type  private unpriv  chroot  wakeup  maxproc command + args
#               (yes)   (yes)   (yes)   (never) (100)
# ==========================================================================
smtp      inet  n       -       -       -       -       smtpd
smtps     inet  n       -       -       -       -       smtpd
#628      inet  n       -       -       -       -       qmqpd
pickup    fifo  n       -       -       60      1       pickup
cleanup   unix  n       -       -       -       0       cleanup
qmgr      fifo  n       -       n       300     1       qmgr
#qmgr     fifo  n       -       -       300     1       oqmgr
tlsmgr    unix  -       -       -       1000?   1       tlsmgr
rewrite   unix  -       -       -       -       -       trivial-rewrite
bounce    unix  -       -       -       -       0       bounce
defer     unix  -       -       -       -       0       bounce
trace     unix  -       -       -       -       0       bounce
verify    unix  -       -       -       -       1       verify
flush     unix  n       -       -       1000?   0       flush
proxymap  unix  -       -       n       -       -       proxymap
proxywrite unix -       -       n       -       1       proxymap
smtp      unix  -       -       -       -       -       smtp
# When relaying mail as backup MX, disable fallback_relay to avoid MX loops
relay     unix  -       -       -       -       -       smtp
-o smtp_fallback_relay=
#       -o smtp_helo_timeout=5 -o smtp_connect_timeout=5
showq     unix  n       -       -       -       -       showq
error     unix  -       -       -       -       -       error
retry     unix  -       -       -       -       -       error
discard   unix  -       -       -       -       -       discard
local     unix  -       n       n       -       -       local
virtual   unix  -       n       n       -       -       virtual
lmtp      unix  -       -       -       -       -       lmtp
anvil     unix  -       -       -       -       1       anvil
scache    unix  -       -       -       -       1       scache
#
# ====================================================================
# Interfaces to non-Postfix software. Be sure to examine the manual
# pages of the non-Postfix software to find out what options it wants.
#
# Many of the following services use the Postfix pipe(8) delivery
# agent.  See the pipe(8) man page for information about ${recipient}
# and other message envelope options.
# ====================================================================
#
# maildrop. See the Postfix MAILDROP_README file for details.
# Also specify in main.cf: maildrop_destination_recipient_limit=1
#
maildrop  unix  -       n       n       -       -       pipe
  flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient}
#
# See the Postfix UUCP_README file for configuration details.
#
uucp      unix  -       n       n       -       -       pipe
  flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient)
#
# Other external delivery methods.
#
ifmail    unix  -       n       n       -       -       pipe
  flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient)
bsmtp     unix  -       n       n       -       -       pipe
  flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient
scalemail-backend unix - n n - 2 pipe
  flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension}
mailman   unix  -       n       n       -       -       pipe
  flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py
  ${nexthop} ${user}

main.cf
Kód: [Vybrat]
# See /usr/share/postfix/main.cf.dist for a commented, more complete version


# Debian specific:  Specifying a file name will cause the first
# line of that file to be used as the name.  The Debian default
# is /etc/mailname.
#myorigin = /etc/mailname

smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
biff = no

# appending .domain is the MUA's job.
append_dot_mydomain = no

# Uncomment the next line to generate "delayed mail" warnings
#delay_warning_time = 4h

readme_directory = no

# TLS parameters
smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache
smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache

# See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for
# information on enabling SSL in the smtp client.

alias_maps = hash:/etc/aliases
alias_database = hash:/etc/aliases
myorigin = /etc/mailname
mydestination = prodatainfo.cz, localhost, come-n-play.cz
mailbox_command = procmail -a "$EXTENSION"
mailbox_size_limit = 0
recipient_delimiter = +
smtpd_delay_reject = no
virtual_maps = hash:/etc/postfix/virtual
smtpd_sasl_auth_enable = yes
smtpd_sasl_security_options = noanonymous
smtpd_sasl_local_domain = $mydestination
broken_sasl_auth_clients = yes
smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd

sasl-passwd (postmap jsem udělal)
Kód: [Vybrat]
* user:pass

Logy

mail.log (stejné jako mail.info)
Kód: [Vybrat]
Feb  1 00:54:05 Server postfix/master[4344]: daemon started -- version 2.5.1, configuration /etc/postfix
Feb  1 00:54:09 Server dovecot: Dovecot v1.0.10 starting up
Feb  1 00:54:42 Server postfix/smtpd[4527]: connect from unknown[77.48.121.138]
Feb  1 00:54:46 Server postfix/smtpd[4529]: connect from unknown[77.48.121.138]
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: SASL authentication failure: Password verification failed
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: unknown[77.48.121.138]: SASL PLAIN authentication failed: authentication failure
Feb  1 00:54:50 Server postfix/smtpd[4527]: disconnect from unknown[77.48.121.138]
Feb  1 00:54:53 Server postfix/smtpd[4529]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Feb  1 00:54:53 Server postfix/smtpd[4529]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Feb  1 00:54:53 Server postfix/smtpd[4529]: warning: SASL authentication failure: Password verification failed
Feb  1 00:54:53 Server postfix/smtpd[4529]: warning: unknown[77.48.121.138]: SASL PLAIN authentication failed: authentication failure
Feb  1 00:54:53 Server postfix/smtpd[4529]: lost connection after AUTH from unknown[77.48.121.138]
Feb  1 00:54:53 Server postfix/smtpd[4529]: disconnect from unknown[77.48.121.138]

mail.err je prázdný

mail.warn
Kód: [Vybrat]
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: SASL authentication failure: Password verification failed
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: unknown[77.48.121.138]: SASL PLAIN authentication failed: authentication failure
Feb  1 00:54:53 Server postfix/smtpd[4529]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Feb  1 00:54:53 Server postfix/smtpd[4529]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory
Feb  1 00:54:53 Server postfix/smtpd[4529]: warning: SASL authentication failure: Password verification failed
Feb  1 00:54:53 Server postfix/smtpd[4529]: warning: unknown[77.48.121.138]: SASL PLAIN authentication failed: authentication failure


Kdyby byl někdo tak laskav a pomohl mi s tím? Kdyby bylo třeba další info tak dodám.

Díky
« Poslední změna: 02 Února 2009, 08:49:08 od Pavel Půlpán »

Martin - ViPEr*CZ*

Re: Potřebuju pomoc s postfixem.
« Odpověď #1 kdy: 01 Února 2009, 08:18:42 »
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory

Neexistuje asi databáze ze který se maj číst ty uživatelé ;)
Open source is gold way... Mint 17.2, Debian 8.1 Jessie| Ubuntu Wiki (návody) | Google vyhledávač | Qt4 návody

bamboo

  • Návštěvník
  • Příspěvků: 4
Re: Potřebuju pomoc s postfixem.
« Odpověď #2 kdy: 01 Února 2009, 10:17:17 »
Feb  1 00:54:50 Server postfix/smtpd[4527]: warning: SASL authentication problem: unable to open Berkeley db /etc/sasldb2: No such file or directory

Neexistuje asi databáze ze který se maj číst ty uživatelé ;)

To už jsem taky řešil.
     1) to kecá, ten soubor tam je
     2) nevim co je to zač, jak tam ty uživatele přidat
     3) k tomu účelu by měl sloužit soubor sasl-passwd

Martin - ViPEr*CZ*

Re: Potřebuju pomoc s postfixem.
« Odpověď #3 kdy: 01 Února 2009, 10:49:56 »
Open source is gold way... Mint 17.2, Debian 8.1 Jessie| Ubuntu Wiki (návody) | Google vyhledávač | Qt4 návody

bamboo

  • Návštěvník
  • Příspěvků: 4
Re: Potřebuju pomoc s postfixem.
« Odpověď #4 kdy: 01 Února 2009, 21:21:10 »
No strávil jsem nad tím další den, ale nepohnul jsem s tím. Akorát jsem si uvědomil, že to bude lepší udělat autentifikaci přes DOVECOT. Nemohl by mi někdo, kdo to konkrétně na verzi Ubuntu 8.04 Hardy Heron už dělal, napsat postup. Googlení mi nepomohlo. Prostě je to na mě moc.



bamboo

  • Návštěvník
  • Příspěvků: 4
Re: Potřebuju pomoc s postfixem.
« Odpověď #5 kdy: 02 Února 2009, 00:05:53 »
Tak pánové díky (i když moc nemam za co), nevim ani jak a proč, ale už to začalo chodit a dokonce podle toho jak jsem chtěl. Díky za ten odkaz, pomohl.

marshall1727

  • Aktivní člen
  • *
  • Příspěvků: 307
Re: Potřebuju pomoc s postfixem. [vyřešeno]
« Odpověď #6 kdy: 09 Února 2009, 00:21:12 »
možná jsem řešil něco podobného
Kód: [Vybrat]
http://forum.ubuntu.cz/index.php/topic,31226.msg234498.html#msg234498
--
koupil jsem si nový server a ladím ho. proto to zde spamuju. (2xXeon5110; IntelServerBoard S5000PSL; 2x2x1GbECC;4xRaptor150G)

 

Provoz zaštiťuje spolek OpenAlt.