TV tuner Asus My Cinema P7131Dual

[bubanek]

Ahoj,
je nějaká šance pod UBUNTEM (6.06) rozchodit TV kartu Asus My Cinema P7131Dual?
Díky

[kozzi11]

no snad by to melo jit s modulem saa7134

[bubanek]

Stáhnul jsem to, rozbalil to, ale teď nevím co s tím :oops:
Nevíte někdo nějakej návod?

Tak jsem někde našel toto SAA7133 Video Broadcast Decoder (to je ta TV karta).
Pomůže to nějak?

[kozzi11]

nemusel si nic stahovat jen si mel zadat sudo modprobe saa7134  a potom sem hod vypis prikazu dmesg

[bubanek]

bubanek@bubanek-desktop:~$ sudo modprobe saa7134
bubanek@bubanek-desktop:~$ dmesg
[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5130
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 VIAK8                                 ) @ 0x000f6a90
[17179569.184000] ACPI: RSDT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
[17179569.184000] ACPI: FADT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
[17179569.184000] ACPI: MADT (v001 VIAK8  AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff77c0
[17179569.184000] ACPI: DSDT (v001 VIAK8  AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:12 APIC version 16
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2010.469 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.200000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.200000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)[17179569.220000] Memory: 1028808k/1048512k available (1976k kernel code, 18936k reserved, 606k data, 288k init, 131008k highmem)
[17179569.220000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.300000] Calibrating delay using timer specific routine.. 4025.56 BogoMIPS (lpj=8051132)
[17179569.300000] Security Framework v1.0.0 initialized
[17179569.300000] SELinux:  Disabled at boot.
[17179569.300000] Mount-cache hash table entries: 512
[17179569.300000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.300000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[17179569.300000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[17179569.300000] CPU: L2 Cache: 512K (64 bytes/line)
[17179569.300000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
[17179569.300000] mtrr: v2.0 (20020519)
[17179569.300000] CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 02
[17179569.300000] Enabling fast FPU save and restore... done.
[17179569.300000] Enabling unmasked SIMD FPU exception support... done.
[17179569.300000] Checking 'hlt' instruction... OK.
[17179569.316000] checking if image is initramfs... it is
[17179569.800000] Freeing initrd memory: 6616k freed
[17179569.812000] ACPI: Looking for DSDT ... not found!
[17179569.812000] ENABLING IO-APIC IRQs
[17179569.816000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179569.956000] NET: Registered protocol family 16
[17179569.956000] EISA bus registered
[17179569.956000] ACPI: bus type pci registered
[17179569.960000] PCI: PCI BIOS revision 2.10 entry at 0xfb320, last bus=1
[17179569.960000] PCI: Using configuration type 1
[17179569.960000] ACPI: Subsystem revision 20051216
[17179569.964000] ACPI: Interpreter enabled
[17179569.964000] ACPI: Using IOAPIC for interrupt routing
[17179569.964000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179569.964000] PCI: Probing PCI hardware (bus 00)
[17179569.968000] Boot video device is 0000:01:00.0
[17179569.968000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.012000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[17179570.012000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[17179570.012000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[17179570.016000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.016000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.016000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.016000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.016000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[17179570.016000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[17179570.016000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[17179570.016000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[17179570.016000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[17179570.020000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.020000] pnp: PnP ACPI init
[17179570.024000] pnp: PnP ACPI: found 13 devices
[17179570.024000] PnPBIOS: Disabled by ACPI PNP
[17179570.024000] PCI: Using ACPI for IRQ routing
[17179570.024000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.052000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[17179570.052000] pnp: 00:01: ioport range 0x40f0-0x40ff could not be reserved
[17179570.052000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved
[17179570.052000] PCI: Bridge: 0000:00:01.0
[17179570.052000]   IO window: a000-afff
[17179570.052000]   MEM window: f4000000-f5ffffff
[17179570.052000]   PREFETCH window: e0000000-efffffff
[17179570.052000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.052000] audit: initializing netlink socket (disabled)
[17179570.052000] audit(1158680383.052:1): initialized
[17179570.052000] highmem bounce pool size: 64 pages
[17179570.052000] VFS: Disk quotas dquot_6.5.1
[17179570.052000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.052000] Initializing Cryptographic API
[17179570.052000] io scheduler noop registered
[17179570.052000] io scheduler anticipatory registered
[17179570.052000] io scheduler deadline registered
[17179570.052000] io scheduler cfq registered
[17179570.052000] isapnp: Scanning for PnP cards...
[17179570.408000] isapnp: No Plug & Play device found
[17179570.416000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179570.424000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.424000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.424000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179570.424000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.424000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.424000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.424000] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.424000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.424000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.424000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.424000] mice: PS/2 mouse device common for all mice
[17179570.428000] EISA: Probing bus 0 at eisa.0
[17179570.428000] Cannot allocate resource for EISA slot 4
[17179570.428000] Cannot allocate resource for EISA slot 5
[17179570.428000] EISA: Detected 0 cards.
[17179570.428000] NET: Registered protocol family 2
[17179570.464000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179570.476000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.476000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[17179570.476000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.476000] TCP: Hash tables configured (established 262144 bind 65536)
[17179570.476000] TCP reno registered
[17179570.476000] TCP bic registered
[17179570.476000] NET: Registered protocol family 1
[17179570.476000] NET: Registered protocol family 8
[17179570.476000] NET: Registered protocol family 20
[17179570.476000] Using IPI Shortcut mode
[17179570.476000] ACPI wakeup devices:
[17179570.476000] PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 UAR1 LPT1
[17179570.476000] ACPI: (supports S0 S1 S4 S5)
[17179570.476000] Freeing unused kernel memory: 288k freed
[17179570.516000] vga16fb: initializing
[17179570.516000] vga16fb: mapped to 0xc00a0000
[17179570.624000] Console: switching to colour frame buffer device 80x25
[17179570.624000] fb0: VGA16 VGA frame buffer device
[17179571.644000] Capability LSM initialized
[17179572.208000] SCSI subsystem initialized
[17179572.212000] ACPI: bus type scsi registered
[17179572.212000] libata version 1.20 loaded.
[17179572.212000] sata_via 0000:00:0f.0: version 1.1
[17179572.212000] **** SET: Misaligned resource pointer: df857a02 Type 07 Len 0
[17179572.212000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[17179572.212000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[17179572.212000] ACPI: PCI Interrupt 0000:00:0f.0 -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179572.212000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9
[17179572.212000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179572.212000] ata1: SATA max UDMA/133 cmd 0xB000 ctl 0xB402 bmdma 0xC000 irq 169
[17179572.212000] ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma 0xC008 irq 169
[17179572.376000] ata1: dev 0 cfg 00:427a 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:407f 93:0000
[17179572.376000] ata1: dev 0 ATA-7, max UDMA/133, 488397168 sectors: LBA48
[17179572.376000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe98a0
[17179572.380000] ata1: dev 0 configured for UDMA/133
[17179572.380000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe98a0
[17179572.384000] scsi0 : sata_via
[17179572.548000] ata2: dev 0 cfg 00:0040 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:80ff 93:0000
[17179572.548000] ata2: dev 0 ATA-7, max UDMA7, 78159215 sectors: LBA48
[17179572.548000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe98a0
[17179572.552000] ata2: dev 0 configured for UDMA/133
[17179572.552000] sata_get_dev_handle: SATA dev addr=0xf0000, handle=0xdffe98a0
[17179572.556000] scsi1 : sata_via
[17179572.556000]   Vendor: ATA       Model: WDC WD2500KS-00M  Rev: 02.0
[17179572.556000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179572.556000]   Vendor: ATA       Model: SAMSUNG HD040GJ   Rev: ZG10
[17179572.556000]   Type:   Direct-Access                      ANSI SCSI revision: 05
[17179572.564000] Driver 'sd' needs updating - please use bus_type methods
[17179572.568000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[17179572.568000] SCSI device sda: drive cache: write back
[17179572.568000] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
[17179572.568000] SCSI device sda: drive cache: write back
[17179572.568000]  sda: sda1
[17179572.580000] sd 0:0:0:0: Attached scsi disk sda
[17179572.580000] SCSI device sdb: 78159215 512-byte hdwr sectors (40018 MB)
[17179572.584000] SCSI device sdb: drive cache: write back
[17179572.588000] SCSI device sdb: 78159215 512-byte hdwr sectors (40018 MB)
[17179572.588000] SCSI device sdb: drive cache: write back
[17179572.588000]  sdb: sdb1 sdb2
[17179572.616000] sd 1:0:0:0: Attached scsi disk sdb
[17179572.744000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179572.744000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[17179572.744000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179572.744000] VP_IDE: chipset revision 6
[17179572.744000] VP_IDE: not 100% native mode: will probe irqs later
[17179572.744000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[17179572.744000]     ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:pio, hdb:pio
[17179572.744000]     ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:pio, hdd:pio
[17179572.744000] Probing IDE interface ide0...
[17179573.608000] hda: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
[17179574.392000] hdb: HL-DT-ST GCE-8527B, ATAPI CD/DVD-ROM drive
[17179574.488000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.488000] Probing IDE interface ide1...
[17179575.068000] hda: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
[17179575.068000] Uniform CD-ROM driver Revision: 3.20
[17179575.076000] hdb: ATAPI 52X CD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33)
[17179575.176000] usbcore: registered new driver usbfs
[17179575.176000] usbcore: registered new driver hub
[17179575.176000] USB Universal Host Controller Interface driver v2.3
[17179575.176000] **** SET: Misaligned resource pointer: dfa9d6c2 Type 07 Len 0
[17179575.176000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[17179575.176000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[17179575.176000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.176000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1
[17179575.176000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179575.176000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[17179575.176000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000cc00
[17179575.176000] hub 1-0:1.0: USB hub found
[17179575.176000] hub 1-0:1.0: 2 ports detected
[17179575.280000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.280000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1
[17179575.280000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179575.280000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[17179575.280000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d000
[17179575.280000] hub 2-0:1.0: USB hub found
[17179575.280000] hub 2-0:1.0: 2 ports detected
[17179575.384000] ACPI: PCI Interrupt 0000:00:10.2 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.384000] PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 1
[17179575.384000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179575.384000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[17179575.384000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d400
[17179575.384000] hub 3-0:1.0: USB hub found
[17179575.384000] hub 3-0:1.0: 2 ports detected
[17179575.488000] ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.488000] PCI: Via IRQ fixup for 0000:00:10.3, from 5 to 1
[17179575.488000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179575.488000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[17179575.488000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000d800
[17179575.488000] hub 4-0:1.0: USB hub found
[17179575.488000] hub 4-0:1.0: 2 ports detected
[17179575.520000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[17179575.592000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[17179575.592000] PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 1
[17179575.592000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179575.592000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[17179575.592000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xf6001000
[17179575.592000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179575.592000] hub 5-0:1.0: USB hub found
[17179575.592000] hub 5-0:1.0: 8 ports detected
[17179575.720000] Probing IDE interface ide1...
[17179576.044000] usb 1-1: device not accepting address 2, error -71
[17179576.304000] Attempting manual resume
[17179576.312000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179576.312000] EXT3-fs: write access will be enabled during recovery.
[17179576.700000] EXT3-fs: recovery complete.
[17179576.700000] kjournald starting.  Commit interval 5 seconds
[17179576.708000] EXT3-fs: mounted filesystem with ordered data mode.
[17179577.236000] usb 5-1: new high speed USB device using ehci_hcd and address 2
[17179577.368000] hub 5-1:1.0: USB hub found
[17179577.368000] hub 5-1:1.0: 4 ports detected
[17179577.896000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[17179584.588000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179584.588000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[17179586.044000] Linux agpgart interface v0.101 (c) Dave Jones
[17179586.044000] agpgart: Detected AGP bridge 0
[17179586.048000] agpgart: AGP aperture is 64M @ 0xf0000000
[17179586.160000] Linux video capture interface: v1.00
[17179586.220000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179586.220000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179586.220000] saa7133[0]: found at 0000:00:0a.0, rev: 208, irq: 185, latency: 32, mmio: 0xf6000000
[17179586.220000] saa7133[0]: subsystem: 1043:4862, board: ASUSTeK P7131 Dual [card=78,autodetected]
[17179586.220000] saa7133[0]: board init: gpio is 40000
[17179586.356000] saa7133[0]: i2c eeprom 00: 43 10 62 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[17179586.356000] saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
[17179586.356000] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d6 ff ff ff ff
[17179586.356000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179586.356000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
[17179586.356000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179586.356000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179586.356000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179586.356000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179586.456000] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[17179586.504000] tuner 1-004b: setting tuner address to 61
[17179586.544000] tuner 1-004b: tuner: type set to tda8290+75a
[17179586.584000] Real Time Clock Driver v1.12
[17179586.612000] saa7133[0]: registered device video0 [v4l2]
[17179586.612000] saa7133[0]: registered device vbi0
[17179586.612000] saa7133[0]: registered device radio0
[17179586.620000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179586.660000] Floppy drive(s): fd0 is 1.44M
[17179586.672000] 8139too Fast Ethernet driver 0.9.27
[17179586.672000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 185
[17179586.672000] eth0: RealTek RTL8139 at 0xf89d4000, 00:14:85:b4:ec:74, IRQ 185
[17179586.672000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[17179586.676000] FDC 0 is a post-1991 82077
[17179586.684000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179586.704000] saa7134 ALSA driver for DMA sound loaded
[17179586.704000] saa7133[0]/alsa: saa7133[0] at 0xf6000000 irq 185 registered as card -1
[17179586.732000] **** SET: Misaligned resource pointer: f7024102 Type 07 Len 0
[17179586.732000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[17179586.732000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[17179586.732000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 193
[17179586.732000] PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 1
[17179586.732000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179586.784000] input: PC Speaker as /class/input/input1
[17179586.792000] parport: PnPBIOS parport detected.
[17179586.792000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179587.252000] usbcore: registered new driver snd-usb-audio
[17179587.260000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179587.344000] drivers/usb/media/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Logitech QC Communicate STX
[17179587.436000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[17179587.580000] ts: Compaq touchscreen protocol output
[17179587.672000] NET: Registered protocol family 10
[17179587.672000] lo: Disabled Privacy Extensions
[17179587.672000] IPv6 over IPv4 tunneling driver
[17179587.828000] usbcore: registered new driver spca5xx
[17179587.828000] drivers/usb/media/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
[17179588.316000] lp0: using parport0 (interrupt-driven).
[17179588.376000] Adding 522104k swap on /dev/sdb2.  Priority:-1 extents:1 across:522104k
[17179588.556000] EXT3 FS on sdb1, internal journal
[17179588.704000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179588.704000] md: bitmap version 4.39
[17179589.080000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179589.376000] cdrom: open failed.
[17179589.680000] cdrom: open failed.
[17179589.680000] cdrom: open failed.
[17179589.988000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179590.016000] NTFS volume version 3.1.
[17179591.668000] NET: Registered protocol family 17
[17179595.744000] ACPI: Power Button (FF) [PWRF]
[17179595.744000] ACPI: Power Button (CM) [PWRB]
[17179595.824000] ibm_acpi: ec object not found
[17179595.848000] pcc_acpi: loading...
[17179596.292000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[17179596.292000] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x6 (1400 mV)
[17179596.292000] powernow-k8:    1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[17179596.292000] cpu_init done, current fid 0xc, vid 0x6
[17179598.476000] eth0: no IPv6 routers present
[17179599.996000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[17179599.996000] [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
[17179599.996000] [fglrx] module loaded - fglrx 8.25.18 [May 18 2006] on minor 0[17179600.248000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
[17179601.120000] [fglrx] Internal AGP support requested, but kernel AGP support active.
[17179601.120000] [fglrx] Have to use kernel AGP support to avoid conflicts.
[17179601.120000] [fglrx] AGP detected, AgpState   = 0x1f000a1b (hardware caps of chipset)
[17179601.120000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179601.120000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179601.120000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179601.120000] [fglrx] AGP enabled,  AgpCommand = 0x1f000312 (selected caps)
[17179601.168000] [fglrx] total      GART = 67108864
[17179601.168000] [fglrx] free       GART = 51113984
[17179601.168000] [fglrx] max single GART = 51113984
[17179601.168000] [fglrx] total      LFB  = 126873600
[17179601.168000] [fglrx] free       LFB  = 116387840
[17179601.168000] [fglrx] max single LFB  = 116387840
[17179601.168000] [fglrx] total      Inv  = 0
[17179601.168000] [fglrx] free       Inv  = 0
[17179601.168000] [fglrx] max single Inv  = 0
[17179601.168000] [fglrx] total      TIM  = 0
[17179601.644000] ppdev: user-space parallel port driver
[17179602.096000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179602.096000] apm: overridden by ACPI.
[17179604.808000] Bluetooth: Core ver 2.8
[17179604.808000] NET: Registered protocol family 31
[17179604.808000] Bluetooth: HCI device and connection manager initialized
[17179604.808000] Bluetooth: HCI socket layer initialized
[17179604.832000] Bluetooth: L2CAP ver 2.8
[17179604.832000] Bluetooth: L2CAP socket layer initialized
[17179604.880000] Bluetooth: RFCOMM socket layer initialized
[17179604.880000] Bluetooth: RFCOMM TTY layer initialized
[17179604.880000] Bluetooth: RFCOMM ver 1.7

[kozzi11]

no tak to znamena ze je vse ok. ted uz jen nainstalit program pro sledovani tv napriklad tvtime

[bubanek]

tvtime se mi nechce spustit
nejdřív se hodně dlouho startuje, ale potom se stejně nezapne

[bubanek]

Ted jsem zkousel MYTHTV a hlásilo to, že nemůže najít kartu. Taky nefunguje příkaz scan, píše mi to, že karta neexistuje
Co s tím?

[Tomáš]

Tak mam podobnej problém, zkoušel jsem to rozchodit podle tohoto návodu a taky podle tohoto, výsledek ale je, že se karta pravděpodobně nějak moc nenainstalovala
hlásí to totiž tuhle chybu "main:1884: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file o r directory" a prý to znamená, že karta nefunguje správně
a aby toho nebylo málo, tak mi přestal fungovat zvuk, hlásí to něco jako že nemam správně zvolenej HW ale nevim jak to změnit
může prosím někdo helpnout??? dík

[Tomáš]

jo ještě sem pozapomněl...mam ubuntu 6.10

[Tomáš]

tak zvuk už běží
TVkarta se nejak castecne nainstalovala takze ji ted mam jako dalsi zvukovej HW
kazdopadne televizi se mi nedari zprovoznit

[Tomáš]

tak uz sem se trochu posunul
kdyz dam "scan dvb.conf > channels.conf"
tak mi to vypise tohle

oem@ubuntu:~$ scan dvb.conf > channels.conf
scanning dvb.conf
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 506000000 0 2 9 3 1 2 0
initial transponder 674000000 0 2 9 3 1 2 0
initial transponder 818000000 0 2 9 3 1 2 0
>>> tune to: 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 506000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 674000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 818000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.

[LS]

Jak jste prisel na obsah souboru dvb.conf?

Ja mam nastaveno toto (viz. http://forum.ubuntu.cz/viewtopic.php?id=2898 )

Kód: [Vybrat]

# DVB-T Praha (Prague, Czech Republic)
# T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy
# Multiplex A, channel 25, Ceske Radiokomunikace
T 506000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE
# Multiplex B, channel 46, Czech Digital Group
T 674000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE
# Multiplex C, channel 64, Telefonica O2 Czech Republic
T 818000000 8MHz 2/3 NONE QAM64 8k 1/8 NONE

[Tomáš]

presne podle toho navodu sem postupoval a obsah souboru mam stejny

[Tomáš]

tak jsem zkusil pouzit obsah souboru channels.conf a pokracoval dal s instalaci a nastavenim mythtv, tvari se ze je vsechno OK ale kdyz dam "Watch TV" tak to hodi hlasku

MythTV is already using all available inputs for the channel you selected. If you want to watch an in-progress recording, select one from the playback menu. If you want to watch live TV, cancel one of the in-progress recordings from the delete menu.

a s tim si teda vubec nevim rady, sem to prohledaval ale nic o tom ze bych nekde neco nahraval sem nenasel

[Tomáš]

Podle tohohle popisu na ABClinuxu je podpora kompletní, mozna mam teda jenom s nastavenim MythTV
muzete teda nekdo doporucit nejakej jednodussi softik na DVB-T
dik

[LS]

mplayer uplne staci

Kód: [Vybrat]

mplayer dvb://CT1

[outsider765]

nooooooo mam podobnej problem...
scan hlasa: "main:1884: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file o r directory"

jeste doplnim dmesg:

Kód: [Vybrat]

[17179569.184000] Linux version 2.6.15-27-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Dec 8 17:51:56 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000]  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196592
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 192496 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 FIC                                   ) @ 0x000f6820
[17179569.184000] ACPI: RSDT (v001 FIC    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
[17179569.184000] ACPI: FADT (v001 FIC    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
[17179569.184000] ACPI: DBGP (v001 FIC    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff6d40
[17179569.184000] ACPI: DSDT (v001 FIC    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x4008
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] Found and enabled local APIC!
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 1500.207 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.528000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.528000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.564000] Memory: 768820k/786368k available (1976k kernel code, 16888k reserved, 606k data, 288k init, 0k highmem)
[17179569.564000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.644000] Calibrating delay using timer specific routine.. 3003.75 BogoMIPS (lpj=6007511)
[17179569.644000] Security Framework v1.0.0 initialized
[17179569.644000] SELinux:  Disabled at boot.
[17179569.644000] Mount-cache hash table entries: 512
[17179569.644000] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179569.644000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
[17179569.644000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179569.644000] CPU: L2 cache: 256K
[17179569.644000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
[17179569.644000] mtrr: v2.0 (20020519)
[17179569.644000] CPU: Intel(R) Pentium(R) 4 CPU 1500MHz stepping 0a
[17179569.644000] Enabling fast FPU save and restore... done.
[17179569.644000] Enabling unmasked SIMD FPU exception support... done.
[17179569.644000] Checking 'hlt' instruction... OK.
[17179569.660000] checking if image is initramfs... it is
[17179570.624000] Freeing initrd memory: 6616k freed
[17179570.648000] ACPI: Looking for DSDT ... not found!
[17179570.652000] ACPI: setting ELCR to 0200 (from 0a20)
[17179570.760000] NET: Registered protocol family 16
[17179570.760000] EISA bus registered
[17179570.760000] ACPI: bus type pci registered
[17179570.772000] PCI: PCI BIOS revision 2.10 entry at 0xfaf70, last bus=2
[17179570.772000] PCI: Using configuration type 1
[17179570.772000] ACPI: Subsystem revision 20051216
[17179570.784000] ACPI: Interpreter enabled
[17179570.784000] ACPI: Using PIC for interrupt routing
[17179570.784000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.784000] PCI: Probing PCI hardware (bus 00)
[17179570.788000] PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
[17179570.788000] PCI quirk: region 4080-40bf claimed by ICH4 GPIO
[17179570.788000] Boot video device is 0000:01:00.0
[17179570.788000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.788000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.820000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179570.820000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.820000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.820000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.820000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.824000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.824000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.824000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.824000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.828000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.828000] pnp: PnP ACPI init
[17179570.836000] pnp: PnP ACPI: found 15 devices
[17179570.836000] PnPBIOS: Disabled by ACPI PNP
[17179570.836000] PCI: Using ACPI for IRQ routing
[17179570.836000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.864000] pnp: 00:00: ioport range 0x280-0x287 has been reserved
[17179570.864000] pnp: 00:02: ioport range 0x4000-0x40bf could not be reserved
[17179570.864000] PCI: Bridge: 0000:00:01.0
[17179570.864000]   IO window: disabled.
[17179570.864000]   MEM window: e4000000-e5ffffff
[17179570.864000]   PREFETCH window: d0000000-dfffffff
[17179570.864000] PCI: Bridge: 0000:00:1e.0
[17179570.864000]   IO window: c000-cfff
[17179570.864000]   MEM window: e6000000-e60fffff
[17179570.864000]   PREFETCH window: disabled.
[17179570.864000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.864000] audit: initializing netlink socket (disabled)
[17179570.864000] audit(1168869726.864:1): initialized
[17179570.864000] VFS: Disk quotas dquot_6.5.1
[17179570.864000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.864000] Initializing Cryptographic API
[17179570.864000] io scheduler noop registered
[17179570.864000] io scheduler anticipatory registered
[17179570.864000] io scheduler deadline registered
[17179570.864000] io scheduler cfq registered
[17179570.864000] isapnp: Scanning for PnP cards...
[17179571.220000] isapnp: No Plug & Play device found
[17179571.248000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[17179571.248000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[17179571.256000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.256000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.256000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.256000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.256000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.260000] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.264000] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179571.264000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.264000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.264000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.264000] mice: PS/2 mouse device common for all mice
[17179571.264000] EISA: Probing bus 0 at eisa.0
[17179571.264000] Cannot allocate resource for EISA slot 4
[17179571.264000] Cannot allocate resource for EISA slot 5
[17179571.264000] EISA: Detected 0 cards.
[17179571.264000] NET: Registered protocol family 2
[17179571.308000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.320000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.320000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[17179571.320000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.320000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.320000] TCP reno registered
[17179571.320000] TCP bic registered
[17179571.320000] NET: Registered protocol family 1
[17179571.320000] NET: Registered protocol family 8
[17179571.320000] NET: Registered protocol family 20
[17179571.320000] Using IPI Shortcut mode
[17179571.320000] ACPI wakeup devices:
[17179571.320000] SLPB PCI0 HUB0 USB0 USB1 MODM UAR1 UAR2 PS2K
[17179571.320000] ACPI: (supports S0 S1 S4 S5)
[17179571.320000] Freeing unused kernel memory: 288k freed
[17179571.412000] vga16fb: initializing
[17179571.412000] vga16fb: mapped to 0xc00a0000
[17179571.572000] Console: switching to colour frame buffer device 80x25
[17179571.572000] fb0: VGA16 VGA frame buffer device
[17179572.600000] Capability LSM initialized
[17179572.784000] ACPI: Fan [FAN] (on)
[17179572.792000] ACPI: Processor [CPU0] (supports 2 throttling states)
[17179572.800000] ACPI: Thermal Zone [THRM] (40 C)
[17179574.044000] ICH2: IDE controller at PCI slot 0000:00:1f.1
[17179574.044000] ICH2: chipset revision 18
[17179574.044000] ICH2: not 100% native mode: will probe irqs later
[17179574.044000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
[17179574.044000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[17179574.044000] Probing IDE interface ide0...
[17179574.332000] hda: ST3402111A, ATA DISK drive
[17179575.004000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179575.004000] Probing IDE interface ide1...
[17179575.740000] hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
[17179576.524000] hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
[17179576.580000] ide1 at 0x170-0x177,0x376 on irq 15
[17179576.608000] hda: max request size: 1024KiB
[17179576.656000] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[17179576.688000] hda: cache flushes supported
[17179576.688000]  hda: hda1 hda2 < hda5 >
[17179576.748000] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[17179576.748000] Uniform CD-ROM driver Revision: 3.20
[17179576.764000] hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179577.096000] usbcore: registered new driver usbfs
[17179577.096000] usbcore: registered new driver hub
[17179577.100000] USB Universal Host Controller Interface driver v2.3
[17179577.100000] **** SET: Misaligned resource pointer: dfa74302 Type 07 Len 0
[17179577.100000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[17179577.100000] PCI: setting IRQ 11 as level-triggered
[17179577.100000] ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[17179577.100000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179577.100000] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[17179577.104000] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[17179577.104000] uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
[17179577.104000] hub 1-0:1.0: USB hub found
[17179577.104000] hub 1-0:1.0: 2 ports detected
[17179577.120000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[17179577.208000] **** SET: Misaligned resource pointer: eec20ec2 Type 07 Len 0
[17179577.208000] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[17179577.208000] ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
[17179577.208000] PCI: Setting latency timer of device 0000:00:1f.4 to 64
[17179577.208000] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[17179577.208000] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[17179577.208000] uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000d800
[17179577.208000] hub 2-0:1.0: USB hub found
[17179577.208000] hub 2-0:1.0: 2 ports detected
[17179577.312000] ACPI: PCI Interrupt 0000:02:04.0[b] -> Link [LNK1] -> GSI 11 (level, low) -> IRQ 11
[17179577.312000] ohci_hcd 0000:02:04.0: OHCI Host Controller
[17179577.312000] ohci_hcd 0000:02:04.0: new USB bus registered, assigned bus number 3
[17179577.312000] ohci_hcd 0000:02:04.0: irq 11, io mem 0xe6012000
[17179577.368000] hub 3-0:1.0: USB hub found
[17179577.368000] hub 3-0:1.0: 2 ports detected
[17179577.472000] **** SET: Misaligned resource pointer: eec208c2 Type 07 Len 0
[17179577.472000] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
[17179577.472000] ACPI: PCI Interrupt 0000:02:04.1[C] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
[17179577.472000] ohci_hcd 0000:02:04.1: OHCI Host Controller
[17179577.472000] ohci_hcd 0000:02:04.1: new USB bus registered, assigned bus number 4
[17179577.472000] ohci_hcd 0000:02:04.1: irq 11, io mem 0xe6013000
[17179577.528000] hub 4-0:1.0: USB hub found
[17179577.528000] hub 4-0:1.0: 2 ports detected
[17179577.632000] **** SET: Misaligned resource pointer: eec205c2 Type 07 Len 0
[17179577.632000] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[17179577.632000] ACPI: PCI Interrupt 0000:02:04.2[D] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[17179577.632000] ohci_hcd 0000:02:04.2: OHCI Host Controller
[17179577.632000] ohci_hcd 0000:02:04.2: new USB bus registered, assigned bus number 5
[17179577.632000] ohci_hcd 0000:02:04.2: irq 11, io mem 0xe6014000
[17179577.688000] hub 5-0:1.0: USB hub found
[17179577.688000] hub 5-0:1.0: 2 ports detected
[17179577.792000] **** SET: Misaligned resource pointer: eec202c2 Type 07 Len 0
[17179577.792000] ACPI: PCI Interrupt Link [LNK0] enabled at IRQ 11
[17179577.792000] ACPI: PCI Interrupt 0000:02:04.3[A] -> Link [LNK0] -> GSI 11 (level, low) -> IRQ 11
[17179577.792000] ehci_hcd 0000:02:04.3: EHCI Host Controller
[17179577.792000] ehci_hcd 0000:02:04.3: debug port 1
[17179577.792000] PCI: cache line size of 128 is not supported by device 0000:02:04.3
[17179577.816000] ehci_hcd 0000:02:04.3: new USB bus registered, assigned bus number 6
[17179577.816000] ehci_hcd 0000:02:04.3: irq 11, io mem 0xe6015000
[17179577.816000] ehci_hcd 0000:02:04.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.816000] hub 6-0:1.0: USB hub found
[17179577.816000] hub 6-0:1.0: 6 ports detected
[17179578.060000] Attempting manual resume
[17179578.140000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.164000] kjournald starting.  Commit interval 5 seconds
[17179578.560000] usb 6-6: new high speed USB device using ehci_hcd and address 3
[17179579.000000] usb 4-1: new low speed USB device using ohci_hcd and address 3
[17179590.508000] Linux agpgart interface v0.101 (c) Dave Jones
[17179590.512000] agpgart: Detected an Intel i845 Chipset.
[17179590.516000] agpgart: AGP aperture is 64M @ 0xe0000000
[17179590.584000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179590.588000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179590.612000] hw_random: RNG not detected
[17179591.856000] nvidia: module license 'NVIDIA' taints kernel.
[17179591.864000] **** SET: Misaligned resource pointer: eec16502 Type 07 Len 0
[17179591.868000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[17179591.868000] PCI: setting IRQ 5 as level-triggered
[17179591.868000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[17179591.868000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8776  Mon Oct 16 21:56:04 PDT 2006
[17179591.868000] Linux video capture interface: v1.00
[17179591.908000] 8139too Fast Ethernet driver 0.9.27
[17179591.908000] ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
[17179591.908000] eth0: RealTek RTL8139 at 0xf08fa000, 00:30:4f:25:f4:78, IRQ 11
[17179591.908000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[17179591.920000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179591.980000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179591.980000] **** SET: Misaligned resource pointer: eaf9ea02 Type 07 Len 0
[17179591.980000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[17179591.980000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[17179591.980000] saa7133[0]: found at 0000:02:02.0, rev: 209, irq: 11, latency: 32, mmio: 0xe6010000
[17179591.980000] saa7133[0]: subsystem: 1043:4876, board: UNKNOWN/GENERIC [card=0,autodetected]
[17179591.980000] saa7133[0]: board init: gpio is 0
[17179592.116000] saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[17179592.116000] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[17179592.116000] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
[17179592.116000] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179592.116000] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
[17179592.116000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179592.116000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179592.116000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179592.116000] saa7133[0]: registered device video0 [v4l2]
[17179592.116000] saa7133[0]: registered device vbi0
[17179593.340000] input: PC Speaker as /class/input/input1
[17179593.352000] Real Time Clock Driver v1.12
[17179593.500000] parport: PnPBIOS parport detected.
[17179593.500000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[17179593.536000] SCSI subsystem initialized
[17179593.560000] usbcore: registered new driver hiddev
[17179593.580000] Initializing USB Mass Storage driver...
[17179593.584000] input: HID 0d62:0535 as /class/input/input2
[17179593.584000] input: USB HID v1.10 Mouse [HID 0d62:0535] on usb-0000:02:04.1-1
[17179593.584000] usbcore: registered new driver usbhid
[17179593.584000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179593.584000] scsi0 : SCSI emulation for USB Mass Storage devices
[17179593.584000] usb-storage: device found at 3
[17179593.584000] usb-storage: waiting for device to settle before scanning
[17179593.584000] usbcore: registered new driver usb-storage
[17179593.584000] USB Mass Storage support registered.
[17179593.640000] **** SET: Misaligned resource pointer: eb34f6c2 Type 07 Len 0
[17179593.640000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[17179593.640000] PCI: setting IRQ 9 as level-triggered
[17179593.640000] ACPI: PCI Interrupt 0000:00:1f.5[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179593.640000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[17179593.672000] saa7134 ALSA driver for DMA sound loaded
[17179593.672000] saa7133[0]/alsa: saa7133[0] at 0xe6010000 irq 11 registered as card -1
[17179593.888000] ts: Compaq touchscreen protocol output
[17179593.916000] Floppy drive(s): fd0 is 1.44M
[17179593.932000] FDC 0 is a post-1991 82077
[17179593.956000] intel8x0_measure_ac97_clock: measured 55214 usecs
[17179593.956000] intel8x0: clocking to 48000
[17179594.692000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179595.192000] lp0: using parport0 (interrupt-driven).
[17179595.296000] Adding 1614492k swap on /dev/hda5.  Priority:-1 extents:1 across:1614492k
[17179595.484000] EXT3 FS on hda1, internal journal
[17179595.788000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179595.788000] md: bitmap version 4.39
[17179596.424000] NET: Registered protocol family 10
[17179596.424000] lo: Disabled Privacy Extensions
[17179596.424000] IPv6 over IPv4 tunneling driver
[17179596.540000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[17179597.100000] cdrom: open failed.
[17179597.628000] cdrom: open failed.
[17179597.668000] cdrom: open failed.
[17179598.584000]   Vendor: Generic   Model: USB SD Reader     Rev: 1.00
[17179598.584000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179598.588000]   Vendor: Generic   Model: USB CF Reader     Rev: 1.01
[17179598.588000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179598.592000]   Vendor: Generic   Model: USB SM Reader     Rev: 1.02
[17179598.592000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179598.596000]   Vendor: Generic   Model: USB MS Reader     Rev: 1.03
[17179598.596000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179598.612000] usb-storage: device scan complete
[17179598.744000] Driver 'sd' needs updating - please use bus_type methods
[17179598.752000] sd 0:0:0:0: Attached scsi removable disk sda
[17179598.760000] sd 0:0:0:1: Attached scsi removable disk sdb
[17179598.776000] sd 0:0:0:2: Attached scsi removable disk sdc
[17179598.808000] sd 0:0:0:3: Attached scsi removable disk sdd
[17179598.868000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179598.868000] sd 0:0:0:1: Attached scsi generic sg1 type 0
[17179598.868000] sd 0:0:0:2: Attached scsi generic sg2 type 0
[17179598.872000] sd 0:0:0:3: Attached scsi generic sg3 type 0
[17179600.776000] NET: Registered protocol family 17
[17179605.876000] ACPI: Power Button (FF) [PWRF]
[17179605.876000] ACPI: Power Button (CM) [PWRB]
[17179605.876000] ACPI: Sleep Button (CM) [SLPB]
[17179606.056000] ibm_acpi: ec object not found
[17179606.104000] pcc_acpi: loading...
[17179607.148000] eth0: no IPv6 routers present
[17179618.400000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[17179618.404000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[17179618.404000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[17179620.264000] ppdev: user-space parallel port driver
[17179620.680000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179620.680000] apm: overridden by ACPI.
[17179621.020000] /dev/vmmon[4770]: Module vmmon: registered with major=10 minor=165
[17179621.024000] /dev/vmmon[4770]: Module vmmon: initialized
[17179621.168000] /dev/vmnet: open called by PID 4793 (vmnet-bridge)
[17179621.168000] /dev/vmnet: hub 0 does not exist, allocating memory.
[17179621.168000] /dev/vmnet: port on hub 0 successfully opened
[17179621.168000] bridge-eth0: enabling the bridge
[17179621.168000] bridge-eth0: up
[17179621.168000] bridge-eth0: already up
[17179621.172000] bridge-eth0: attached
[17179621.252000] /dev/vmnet: open called by PID 4807 (vmnet-natd)
[17179621.252000] /dev/vmnet: hub 8 does not exist, allocating memory.
[17179621.252000] /dev/vmnet: port on hub 8 successfully opened
[17179621.716000] Bluetooth: Core ver 2.8
[17179621.716000] NET: Registered protocol family 31
[17179621.716000] Bluetooth: HCI device and connection manager initialized
[17179621.716000] Bluetooth: HCI socket layer initialized
[17179621.808000] Bluetooth: L2CAP ver 2.8
[17179621.808000] Bluetooth: L2CAP socket layer initialized
[17179621.860000] Bluetooth: RFCOMM socket layer initialized
[17179621.860000] Bluetooth: RFCOMM TTY layer initialized
[17179621.860000] Bluetooth: RFCOMM ver 1.7
[17179631.224000] /dev/vmnet: open called by PID 5021 (vmnet-netifup)
[17179631.224000] /dev/vmnet: hub 1 does not exist, allocating memory.
[17179631.224000] /dev/vmnet: port on hub 1 successfully opened
[17179631.232000] /dev/vmnet: open called by PID 5022 (vmnet-netifup)
[17179631.232000] /dev/vmnet: port on hub 8 successfully opened
[17179631.368000] /dev/vmnet: open called by PID 5047 (vmnet-dhcpd)
[17179631.368000] /dev/vmnet: port on hub 1 successfully opened
[17179631.372000] /dev/vmnet: open called by PID 5048 (vmnet-dhcpd)
[17179631.372000] /dev/vmnet: port on hub 8 successfully opened
[17179641.612000] vmnet1: no IPv6 routers present
[17179642.240000] vmnet8: no IPv6 routers present
[17179673.880000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179673.916000] ISOFS: changing to secondary root
[17183908.284000] cdrom: open failed.
[17183908.304000] cdrom: open failed.
[17183978.124000] cdrom: open failed.
[17185171.688000] cdrom: open failed.
[17185171.728000] cdrom: open failed.
[17186432.636000] saa7134 ALSA driver for DMA sound unloadedlinux mam jen dva mesice, tak na to prosim berte ohled ;-)

[Tomáš]

Omlouvam se, kdyz sem googlil abych to rozbehal (bohuzel zatim neuspesne) tak jsem nekde nasel ze nekdy nestaci

Kód: [Vybrat]

sudo modprobe saa7134ale chce to navic

Kód: [Vybrat]

sudo modprobe saa7134-dvbno a pak jsem o to v euforii nejak zapomnel podelit

[outsider765]

to sotek81: kdyz ses od te hlasky, kterou to ted hazi me, nejak posunul, mohl by si mi, plssssssssssssss, napsat jak??

[outsider765]

plssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssss

[Tomáš]

no prave tim ze sem dal sudo modprobe saa7134 7134-dvb

kartu to pak tak nejak z casti naslo a scanovani probiha jak jsem posilal vyse

[outsider765]

saa7133[0]: subsystem: 1043:4862, board: ASUSTeK P7131 Dual [card=78,autodetected]

.. ja tam mam board: NEZNAMY  card=0.. vsichni ostatni tam maj tohle.. modprobe saa7134 7134-dvb nepomohlo a tak me napadlo, zda to nemuze byt timhle???

[outsider765]

noo zkousel jsem "modprobe saa7134 card=78" a nic..

[Tomáš]

Aha, toho jsem si predtim nevsimul, tvoje karta ma novejsi revizi a ta potrebuje nakej patch na ovladace, viz tohle

je mi lito, ale jsem linuxovej zacatecnik takze vic asi nepomuzu