update-grub.real tam je...
update-grub.real
#!/bin/bash
#
# Insert a list of installed kernels in a grub config file
# Copyright 2001 Wichert Akkerman <wichert@linux.com>
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# Contributors:
# Jason Thomas <jason@debian.org>
# David B.Harris <dbarclay10@yahoo.ca>
# Marc Haber <mh@zugschlus.de>
# Crispin Flowerday <crispin@zeus.com>
# Abort on errors
set -e
host_os=`uname -s | tr '[A-Z]' '[a-z]'`
abort() {
message=$@
echo >&2
echo -e "$message" >&2
echo >&2
exit 1
}
find_grub_dir ()
{
echo -n "Searching for GRUB installation directory ... " >&2
for d in $grub_dirs ; do
if [ -d "$d" ] ; then
grub_dir="$d"
break
fi
done
if [ -z "$grub_dir" ] ; then
abort "No GRUB directory found.\n To create a template run 'mkdir /boot/grub' first.\n To install grub, install it manually or try the 'grub-install' command.\n ### Warning, grub-install is used to change your MBR. ###"
else
echo "found: $grub_dir" >&2
fi
echo $grub_dir
}
find_device ()
{
mount_point=$1
# Autodetect current root device
device=
if [ -f /etc/fstab ] ; then
while read DEV MNT FOO; do
if `echo "$DEV" | grep -q "^#"`; then
continue
fi
if [ "$MNT" = "$mount_point" ]; then
device="$DEV";
fi
done < /etc/fstab
fi
if [ -n "$device" ] ; then
case "$device" in
LABEL=* | UUID=*)
device=`readlink -f "$(findfs $device)"`
;;
*)
device=`readlink -f "$device"`
;;
esac
fi
echo $device
}
find_root_device ()
{
device=$(find_device "/")
if [ -z "$device" ]; then
echo "Cannot determine root device. Assuming /dev/hda1" >&2
echo "This error is probably caused by an invalid /etc/fstab" >&2
device=/dev/hda1
fi
echo $device
}
# Usage: convert_raid1 os_device
# Checks if os_device is a software raid1.
# If so, converts to first physical device in array.
convert_raid1 ()
{
case $1 in
/dev/md[0-9])
: ;; # Continue
*)
return 1 ;;
esac
[ -x /sbin/mdadm ] || return 1
# Check that the raid device is raid1
raidlevel=$(mdadm -D -b $1 | grep "^ARRAY" | \
sed "s/^.*level=//" | cut -d" " -f1)
[ "$raidlevel" = "raid1" ] || return 1
# Take only the first device that makes up the raid
raiddev=$(mdadm -D $1 | grep -A1 "Number" | grep "dev" \
| sed "s/^.*\(\/dev\/.*\)$/\1/")
[ -n "$raiddev" ] || return 1
echo $raiddev
return 0
}
# Usage: convert os_device
# Convert an OS device to the corresponding GRUB drive.
# This part is OS-specific.
convert () {
# First, check if the device file exists.
if test -e "$1"; then
:
else
echo "$1: Not found or not a block device." 1>&2
exit 1
fi
host_os=`uname -s | tr '[[:upper:]]' '[[:lower:]]'`
# Break the device name into the disk part and the partition part.
case "$host_os" in
linux)
tmp_disk=`echo "$1" | sed -e 's%\([sh]d[[:lower:]]\)[0-9]*$%\1%' \
-e 's%\(fd[0-9]*\)$%\1%' \
-e 's%/part[0-9]*$%/disc%' \
-e 's%\(c[0-7]d[0-9]*\).*$%\1%'`
tmp_part=`echo "$1" | sed -e 's%.*/[sh]d[[:lower:]]\([0-9]*\)$%\1%' \
-e 's%.*/fd[0-9]*$%%' \
-e 's%.*/floppy/[0-9]*$%%' \
-e 's%.*/\(disc\|part\([0-9]*\)\)$%\2%' \
-e 's%.*c[0-7]d[0-9]*p*%%'`
;;
gnu)
tmp_disk=`echo "$1" | sed 's%\([sh]d[0-9]*\).*%\1%'`
tmp_part=`echo "$1" | sed "s%$tmp_disk%%"` ;;
freebsd|*/kfreebsd)
tmp_disk=`echo "$1" | sed 's%r\{0,1\}\([saw]d[0-9]*\).*$%\1%' \
| sed 's%r\{0,1\}\(da[0-9]*\).*$%\1%'`
tmp_part=`echo "$1" \
| sed "s%.*/r\{0,1\}[saw]d[0-9]\(s[0-9]*[a-h]\)%\1%" \
| sed "s%.*/r\{0,1\}da[0-9]\(s[0-9]*[a-h]\)%\1%"`
;;
netbsd|*/knetbsd)
tmp_disk=`echo "$1" | sed 's%r\{0,1\}\([sw]d[0-9]*\).*$%r\1d%' \
| sed 's%r\{0,1\}\(fd[0-9]*\).*$%r\1a%'`
tmp_part=`echo "$1" \
| sed "s%.*/r\{0,1\}[sw]d[0-9]\([abe-p]\)%\1%"`
;;
*)
echo "update-grub does not support your OS yet." 1>&2
exit 1 ;;
esac
# Get the drive name.
tmp_drive=`grep -v '^#' $device_map | grep "$tmp_disk *$" \
| sed 's%.*\(([hf]d[0-9][a-z0-9,]*)\).*%\1%'`
# If not found, print an error message and exit.
if test "x$tmp_drive" = x; then
echo "$1 does not have any corresponding BIOS drive." 1>&2
exit 1
fi
if test "x$tmp_part" != x; then
# If a partition is specified, we need to translate it into the
# GRUB's syntax.
case "$host_os" in
linux)
echo "$tmp_drive" | sed "s%)$%,`expr $tmp_part - 1`)%" ;;
gnu)
if echo $tmp_part | grep "^s" >/dev/null; then
tmp_pc_slice=`echo $tmp_part \
| sed "s%s\([0-9]*\)[a-z]*$%\1%"`
tmp_drive=`echo "$tmp_drive" \
| sed "s%)%,\`expr "$tmp_pc_slice" - 1\`)%"`
fi
if echo $tmp_part | grep "[a-z]$" >/dev/null; then
tmp_bsd_partition=`echo "$tmp_part" \
| sed "s%[^a-z]*\([a-z]\)$%\1%"`
tmp_drive=`echo "$tmp_drive" \
| sed "s%)%,$tmp_bsd_partition)%"`
fi
echo "$tmp_drive" ;;
freebsd|*/kfreebsd)
if echo $tmp_part | grep "^s" >/dev/null; then
tmp_pc_slice=`echo $tmp_part \
| sed "s%s\([0-9]*\)[a-h]*$%\1%"`
tmp_drive=`echo "$tmp_drive" \
| sed "s%)%,\`expr "$tmp_pc_slice" - 1\`)%"`
fi
if echo $tmp_part | grep "[a-h]$" >/dev/null; then
tmp_bsd_partition=`echo "$tmp_part" \
| sed "s%s\{0,1\}[0-9]*\([a-h]\)$%\1%"`
tmp_drive=`echo "$tmp_drive" \
| sed "s%)%,$tmp_bsd_partition)%"`
fi
echo "$tmp_drive" ;;
netbsd|*/knetbsd)
if echo $tmp_part | grep "^[abe-p]$" >/dev/null; then
tmp_bsd_partition=`echo "$tmp_part" \
| sed "s%\([a-p]\)$%\1%"`
tmp_drive=`echo "$tmp_drive" \
| sed "s%)%,$tmp_bsd_partition)%"`
fi
echo "$tmp_drive" ;;
esac
else
# If no partition is specified, just print the drive name.
echo "$tmp_drive"
fi
}
# Usage: convert_default os_device
# Convert an OS device to the corresponding GRUB drive.
# Calls OS-specific convert, and returns a default of
# (hd0,0) if anything goes wrong
convert_default () {
# Check if device is software raid1 array
if tmp_dev=$(convert_raid1 $1 2>/dev/null) ; then
: # Use device returned by convert_raid1
else
tmp_dev=$1
fi
if tmp=$(convert $tmp_dev 2>/dev/null) ; then
echo $tmp
else
echo "(hd0,0)"
fi
}
## Configuration Options
# directory's to look for the grub installation and the menu file
grub_dirs="/boot/grub /boot/boot/grub"
# The grub installation directory
grub_dir=$(find_grub_dir)
# Full path to the menu.lst
menu_file_basename=menu.lst
menu_file=$grub_dir/$menu_file_basename
# the device for the / filesystem
root_device=$(find_root_device)
# the device for the /boot filesystem
boot_device=$(find_device "/boot")
# Full path to the device.map
device_map=$grub_dir/device.map
# Default kernel options, overidden by the kopt statement in the menufile.
kopt="root=$root_device ro"
# Title
title="Debian GNU/`uname -s | sed -e s,GNU/,,g`"
# should update-grub remember the default entry
updatedefaultentry="false"
# Drive(in GRUB terms) where the kernel is located. Overridden by the
# kopt statement in menufile.
# if we don't have a device.map then we can't use the convert function.
if test -f "$device_map" ; then
if test -z "$boot_device" ; then
grub_root_device=$(convert_default "$root_device")
else
grub_root_device=$(convert_default "$boot_device")
fi
else
grub_root_device="(hd0,0)"
fi
# should grub create the alternative boot options in the menu
alternative="true"
# should grub lock the alternative boot options in the menu
lockalternative="false"
# additional options to use with the default boot option, but not with the
# alternatives
defoptions=""
# should grub lock the old kernels
lockold="false"
# Xen hypervisor options to use with the default Xen boot option
xenhopt=""
# Xen Linux kernel options to use with the default Xen boot option
xenkopt="console=tty0"
# options to use with the alternative boot options
altoptions="(single-user mode) single"
# controls howmany kernels are listed in the config file,
# this does not include the alternative kernels
howmany="all"
# should grub create a memtest86 entry
memtest86="true"
# stores the command line arguments
command_line_arguments=$1
# read user configuration
if test -f "/etc/default/grub" ; then
. /etc/default/grub
fi
# Default options to use in a new config file. This will only be used if $menu_file
# doesn't already exist. Only edit the lines between the two "EOF"s. The others are
# part of the script.
newtemplate=$(tempfile)
cat > "$newtemplate" <<EOF
# $menu_file_basename - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5
# Pretty colours
color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 \$1\$gLhU0/\$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
EOF
## End Configuration Options
# Make sure we use the standard sorting order
LC_COLLATE=C
# Magic markers we use
start="### BEGIN AUTOMAGIC KERNELS LIST"
end="### END DEBIAN AUTOMAGIC KERNELS LIST"
startopt="## ## Start Default Options ##"
endopt="## ## End Default Options ##"
# Extract options from config file
ExtractMenuOpt()
{
opt=$1
sed -ne "/^$start\$/,/^$end\$/ {
/^$startopt\$/,/^$endopt\$/ {
/^# $opt=/ {
s/^# $opt=\(.*\)\$/\1/
p
}
}
}" $menu
}
GetMenuOpts()
{
opt=$1
sed -ne "/^$start\$/,/^$end\$/ {
/^$startopt\$/,/^$endopt\$/ {
/^# $opt=/ {
p
}
}
}" $menu
}
ExtractMenuOpts()
{
opt=$1
GetMenuOpts $opt | sed "s/^# $opt=\(.*\)\$/\1=\"\2\"/"
}
GetMenuOpt()
{
opt=$1
value=$2
tmp=$(ExtractMenuOpt "$opt")
[ -z "$tmp" ] || value="$tmp"
echo $value
}
# Compares two version strings A and B
# Returns -1 if A<B
# 0 if A==B
# 1 if A>B
# This compares version numbers of the form
# 2.4.14.2 > 2.4.14
# 2.4.14random = 2.4.14-random > 2.4.14-ac10 > 2.4.14 > 2.4.14-pre2 >
# 2.4.14-pre1 > 2.4.13-ac99
CompareVersions()
{
#Changes the line something-x.y.z into somthing-x.y.z.q
#This is to ensure that kernels with a .q is treated as higher than the ones without
#First a space is put after the version number
v1=$(echo $1 | sed -e 's!^\(.*-\([0-9]\+\.\)\{2,3\}[0-9]\+\)\(.*\)!\1 \3!g')
v2=$(echo $2 | sed -e 's!^\(.*-\([0-9]\+\.\)\{2,3\}[0-9]\+\)\(.*\)!\1 \3!g')
#If the version number only has 3 digits then put in another .0
v1=$(echo $v1 | sed -e 's!^\(.*-\([0-9]\+\.\)\{2\}[0-9]\+\)\( .*\)!\1.0 \3!g')
v2=$(echo $v2 | sed -e 's!^\(.*-\([0-9]\+\.\)\{2\}[0-9]\+\)\( .*\)!\1.0 \3!g')
# Then split the version number and remove any '.' 's or dashes
v1=$(echo $v1 | sed -e 's![-\.]\+! !g' -e 's!\([0-9]\)\([[:alpha:]]\)!\1 \2!')
v2=$(echo $v2 | sed -e 's![-\.]\+! !g' -e 's!\([0-9]\)\([[:alpha:]]\)!\1 \2!')
# we weight different kernel suffixes here
# ac = 50
# pre = -50
# rc = -40
# test = -60
# others are given 99
v1=$(echo $v1 | sed -e 's! k7! 786 !g' -e 's! ac! 50 !g' -e 's! rc! -40 !g' -e 's! pre! -50 !g' -e 's! test! -60 !g' -e 's![^-0-9 ]\+!99!g')
v2=$(echo $v2 | sed -e 's! k7! 786 !g' -e 's! ac! 50 !g' -e 's! rc! -40 !g' -e 's! pre! -50 !g' -e 's! test! -60 !g' -e 's![^-0-9 ]\+!99!g')
result=0; v1finished=0; v2finished=0;
while [ $result -eq 0 ] && [ $v1finished -eq 0 ] && [ $v2finished -eq 0 ];
do
if [ "$v1" = "" ]; then
v1comp=0; v1finished=1
else
set -- $v1; v1comp=$1; shift; v1=$*
fi
if [ "$v2" = "" ]; then
v2comp=0; v2finished=1
else
set -- $v2; v2comp=$1; shift; v2=$*
fi
set +e
result=`expr $v1comp - $v2comp`
result=`expr substr $result 1 2`
set -e
if [ $result -gt 0 ]; then result=1
elif [ $result -lt 0 ]; then result=-1
fi
done
# finally return the result
echo $result
}
# looks in the directory specified for an initrd image with the version specified
FindInitrdName()
{
# strip trailing slashes
directory=$(echo $1 | sed -e 's#/*$##')
version=$2
# initrd
# initrd.img
# initrd-lvm
# .*.gz
initrdName=""
names="initrd initrd.img initrd-lvm"
compressed="gz"
for n in $names ; do
# make sure we haven't already found it
if [ -z "$initrdName" ] ; then
if [ -f "$directory/$n$version" ] ; then
initrdName="$n$version"
break
else
for c in $compressed ; do
if [ -f "$directory/$n$version.$c" ] ; then
initrdName="$n$version.$c"
break
fi
done
fi
else
break
fi
done
# return the result
echo $initrdName
}
get_kernel_opt()
{
kernel_version=$1
version=$(echo $kernel_version | sed 's/^[^0-9]*//')
version=$(echo $version | sed 's/[-\+\.]/_/g')
if [ -n "$version" ] ; then
while [ -n "$version" ] ; do
currentOpt="$(eval "echo \${kopt_$version}")"
if [ -n "$currentOpt" ] ; then
break
fi
version=$(echo $version | sed 's/_\?[^_]*$//')
done
fi
if [ -z "$currentOpt" ] ; then
currentOpt=$kopt
fi
echo $currentOpt
}
write_kernel_entry()
{
local kernel_version; kernel_version=$1; shift
local recovery_desc; recovery_desc=$1; shift
local lock_alternative; lock_alternative=$1; shift
local grub_root_device; grub_root_device=$1; shift
local kernel; kernel=$1; shift
local kernel_options; kernel_options=$1; shift
local recovery_suffix; recovery_suffix=$1; shift
local initrd; initrd=$1; shift
#local savedefault; savedefault=$1; shift
shift
local lockold; lockold=$1; shift
local hypervisor
if [ -n "$1" ]; then
# Hypervisor.
hypervisor=$1; shift
local hypervisor_image; hypervisor_image=$1; shift
local hypervisor_version; hypervisor_version=$1; shift
local hypervisor_options; hypervisor_options=$1; shift
fi
echo -n "title " >> $buffer
if [ -n "$hypervisor" ]; then
echo -n "$hypervisor $hypervisor_version / " >> $buffer
fi
echo -n "$title" >> $buffer
if [ -n "$kernel_version" ]; then
echo -n ", kernel $kernel_version" >> $buffer
fi
if [ -n "$recovery_desc" ]; then
echo -n " $recovery_desc" >> $buffer
fi
echo >> $buffer
# lock the alternative options
if test x"$lock_alternative" = x"true" ; then
echo "lock" >> $buffer
fi
# lock the old entries
if test x"$lockold" = x"true" ; then
echo "lock" >> $buffer
fi
echo "root $grub_root_device" >> $buffer
echo -n "kernel " >> $buffer
if [ -n "$hypervisor" ]; then
echo -n "$hypervisor_image" >> $buffer
if [ -n "$hypervisor_options" ]; then
echo -n " $hypervisor_options" >> $buffer
fi
echo >> $buffer
echo -n "module " >> $buffer
fi
echo -n "$kernel" >> $buffer
if [ -n "$kernel_options" ]; then
echo -n " $kernel_options" >> $buffer
fi
if [ -n "$recovery_desc" ]; then
echo -n " $recovery_suffix" >> $buffer
fi
echo >> $buffer
if [ -n "$initrd" ]; then
if [ -n "$hypervisor" ]; then
echo -n "module " >> $buffer
else
echo -n "initrd " >> $buffer
fi
echo "$initrd" >> $buffer
fi
echo >> $buffer
}
echo -n "Testing for an existing GRUB $menu_file_basename file ... " >&2
# Test if our menu file exists
if [ -f "$menu_file" ] ; then
menu="$menu_file"
rm -f $newtemplate
unset newtemplate
echo "found: $menu_file" >&2
cp -f "$menu_file" "$menu_file~"
else
# if not ask user if they want us to create one
menu="$menu_file"
echo >&2
echo >&2
echo -n "Could not find $menu_file file. " >&2
if [ "-y" = "$command_line_arguments" ] ; then
echo >&2
echo "Generating $menu_file" >&2
answer=y
else
echo -n "Would you like $menu_file generated for you? " >&2
echo -n "(y/N) " >&2
read answer
fi
case "$answer" in
y* | Y*)
cat "$newtemplate" > $menu_file
rm -f $newtemplate
unset newtemplate
;;
*)
abort "Not creating $menu_file as you wish"
;;
esac
fi
# Extract the kernel options to use
kopt=$(GetMenuOpt "kopt" "$kopt")
# Set the kernel 2.6 option only for fresh install
test -z "$(GetMenuOpt "kopt" "")" && kopt_2_6="root=$root_device ro"
# Extract options for specific kernels
opts="$(ExtractMenuOpts "\(kopt_[[:alnum:]_]\+\)")"
test -z "$opts" || eval "$opts"
CustomKopts=$(GetMenuOpts "\(kopt_[[:alnum:]_]\+\)")
# Extract the grub root
grub_root_device=$(GetMenuOpt "groot" "$grub_root_device")
# Extract the old recovery value
alternative=$(GetMenuOpt "recovery" "$alternative")
# Extract the alternative value
alternative=$(GetMenuOpt "alternative" "$alternative")
# Extract the lockalternative value
lockalternative=$(GetMenuOpt "lockalternative" "$lockalternative")
# Extract the additional default options
defoptions=$(GetMenuOpt "defoptions" "$defoptions")
# Extract the lockold value
lockold=$(GetMenuOpt "lockold" "$lockold")
# Extract Xen hypervisor options
xenhopt=$(GetMenuOpt "xenhopt" "$xenhopt")
# Extract Xen Linux kernel options
xenkopt=$(GetMenuOpt "xenkopt" "$xenkopt")
# Extract the howmany value
howmany=$(GetMenuOpt "howmany" "$howmany")
# Extract the memtest86 value
memtest86=$(GetMenuOpt "memtest86" "$memtest86")
# Extract the updatedefaultentry option
updatedefaultentry=$(GetMenuOpt "updatedefaultentry" "$updatedefaultentry")
# Generate the menu options we want to insert
buffer=$(tempfile)
echo $start >> $buffer
echo "## lines between the AUTOMAGIC KERNELS LIST markers will be modified" >> $buffer
echo "## by the debian update-grub script except for the default options below" >> $buffer
echo >> $buffer
echo "## DO NOT UNCOMMENT THEM, Just edit them to your needs" >> $buffer
echo >> $buffer
echo "## ## Start Default Options ##" >> $buffer
echo "## default kernel options" >> $buffer
echo "## default kernel options for automagic boot options" >> $buffer
echo "## If you want special options for specific kernels use kopt_x_y_z" >> $buffer
echo "## where x.y.z is kernel version. Minor versions can be omitted." >> $buffer
echo "## e.g. kopt=root=/dev/hda1 ro" >> $buffer
echo "## kopt_2_6_8=root=/dev/hdc1 ro" >> $buffer
echo "## kopt_2_6_8_2_686=root=/dev/hdc2 ro" >> $buffer
echo "# kopt=$kopt" >> $buffer
if [ -n "$CustomKopts" ] ; then
echo "$CustomKopts" >> $buffer
elif [ -n "$kopt_2_6" ] && [ "$kopt" != "$kopt_2_6" ]; then
echo "# kopt_2_6=$kopt_2_6" >> $buffer
fi
echo >> $buffer
echo "## default grub root device" >> $buffer
echo "## e.g. groot=(hd0,0)" >> $buffer
echo "# groot=$grub_root_device" >> $buffer
echo >> $buffer
echo "## should update-grub create alternative automagic boot options" >> $buffer
echo "## e.g. alternative=true" >> $buffer
echo "## alternative=false" >> $buffer
echo "# alternative=$alternative" >> $buffer
echo >> $buffer
echo "## should update-grub lock alternative automagic boot options" >> $buffer
echo "## e.g. lockalternative=true" >> $buffer
echo "## lockalternative=false" >> $buffer
echo "# lockalternative=$lockalternative" >> $buffer
echo >> $buffer
echo "## additional options to use with the default boot option, but not with the" >> $buffer
echo "## alternatives" >> $buffer
echo "## e.g. defoptions=vga=791 resume=/dev/hda5" >> $buffer
echo "# defoptions=$defoptions" >> $buffer
echo >> $buffer
echo "## should update-grub lock old automagic boot options" >> $buffer
echo "## e.g. lockold=false" >> $buffer
echo "## lockold=true" >> $buffer
echo "# lockold=$lockold" >> $buffer
echo >> $buffer
echo "## Xen hypervisor options to use with the default Xen boot option" >> $buffer
echo "# xenhopt=$xenhopt" >> $buffer
echo >> $buffer
echo "## Xen Linux kernel options to use with the default Xen boot option" >> $buffer
echo "# xenkopt=$xenkopt" >> $buffer
echo >> $buffer
echo "## altoption boot targets option" >> $buffer
echo "## multiple altoptions lines are allowed" >> $buffer
echo "## e.g. altoptions=(extra menu suffix) extra boot options" >> $buffer
echo "## altoptions=(single-user) single" >> $buffer
if ! grep -q "^# altoptions" $menu ; then
echo "# altoptions=$altoptions" >> $buffer
else
grep "^# altoptions" $menu >> $buffer
fi
echo >> $buffer
echo "## controls how many kernels should be put into the $menu_file_basename" >> $buffer
echo "## only counts the first occurence of a kernel, not the" >> $buffer
echo "## alternative kernel options" >> $buffer
echo "## e.g. howmany=all" >> $buffer
echo "## howmany=7" >> $buffer
echo "# howmany=$howmany" >> $buffer
echo >> $buffer
echo "## should update-grub create memtest86 boot option" >> $buffer
echo "## e.g. memtest86=true" >> $buffer
echo "## memtest86=false" >> $buffer
echo "# memtest86=$memtest86" >> $buffer
echo >> $buffer
echo "## should update-grub adjust the value of the default booted system" >> $buffer
echo "## can be true or false" >> $buffer
echo "# updatedefaultentry=$updatedefaultentry" >> $buffer
echo >> $buffer
echo "## ## End Default Options ##" >> $buffer
echo >> $buffer
echo -n "Searching for splash image ... " >&2
current_splash=`grep '^splashimage=' ${menu_file} || true`
splashimage_path="splashimage=${grub_root_device}${grub_dir##${boot_device:+/boot}}/splash.xpm.gz"
if [ `sed -e "/^$start/,/^$end/d" $menu_file | grep -c '^splashimage='` != "0" ] ; then
#checks for splashscreen defined outside the autoupdated part
splashimage=$(grep '^splashimage=' ${menu_file})
echo "found: ${splashimage##*=}" >&2
echo >&2
elif [ -f "${grub_dir}/splash.xpm.gz" ] && [ "$current_splash" = "" ]; then
echo "found: /boot/grub/splash.xpm.gz" >&2
echo "$splashimage_path" >> $buffer
echo >> $buffer
elif [ -f "${grub_dir}/splash.xpm.gz" ] && [ "$current_splash" = "$splashimage_path" ]; then
echo "found: /boot/grub/splash.xpm.gz" >&2
echo "$splashimage_path" >> $buffer
echo >> $buffer
elif [ "$current_splash" != "" ] && [ "$current_splash" != "$splashimage_path" ]; then
echo "found but preserving previous setting: $(grep '^splashimage=' ${menu_file})" >&2
echo "$current_splash" >> $buffer
echo >> $buffer
else
echo "none found, skipping ..." >&2
fi
xenKernels=""
for ver in `grep -l CONFIG_XEN_PRIVILEGED_GUEST=y /boot/config* | sed -e s%/boot/config-%%`; do
# ver is a kernel version
kern="/boot/vmlinuz-$ver"
if [ -r $kern ] ; then
newerKernels=""
for i in $xenKernels ; do
res=$(CompareVersions "$kern" "$i")
if [ "$kern" != "" ] && [ "$res" -gt 0 ] ; then
newerKernels="$newerKernels $kern $i"
kern=""
else
newerKernels="$newerKernels $i"
fi
done
if [ "$kern" != "" ] ; then
newerKernels="$newerKernels $kern"
fi
xenKernels="$newerKernels"
fi
done
sortedKernels=""
for kern in $(/bin/ls -1vr /boot | grep -v "dpkg-*" | grep -v "xen" | grep "^vmlinuz-") ; do
# found a kernel
if `echo "$xenKernels" | grep -q $kern` ; then
continue
fi
# not a Xen kernel
kern="/boot/$kern"
newerKernels=""
for i in $sortedKernels ; do
res=$(CompareVersions "$kern" "$i")
if [ "$kern" != "" ] && [ "$res" -gt 0 ] ; then
newerKernels="$newerKernels $kern $i"
kern=""
else
newerKernels="$newerKernels $i"
fi
done
if [ "$kern" != "" ] ; then
newerKernels="$newerKernels $kern"
fi
sortedKernels="$newerKernels"
done
if test -f "/boot/vmlinuz.old" ; then
sortedKernels="/boot/vmlinuz.old $sortedKernels"
fi
if test -f "/boot/vmlinuz" ; then
sortedKernels="/boot/vmlinuz $sortedKernels"
fi
hypervisors=""
for hyp in /boot/xen-*.gz; do
if [ ! -h "$hyp" ] && [ -f "$hyp" ]; then
hypervisors="$hypervisors `basename "$hyp"`"
fi
done
# figure out where grub looks for the kernels at boot time
kernel_dir=/boot
if [ -n "$boot_device" ] ; then
kernel_dir=
fi
#Finding the value the default line
use_grub_set_default="false"
if test "$updatedefaultentry" = "true" ; then
defaultEntryNumber=$(sed -ne 's/^[[:blank:]]*default[[:blank:]]*\(.*\).*/\1/p' $menu)
if [ "$defaultEntryNumber" = "saved" ] ; then
defaultEntryNumber=$(sed 'q' "$grub_dir/default")
use_grub_set_default="true"
fi
if test -n "$defaultEntryNumber"; then
defaultEntryNumberPlusOne=$(expr $defaultEntryNumber \+ 1);
defaultEntry=$(grep "^[[:blank:]]*title" $menu | sed -ne "${defaultEntryNumberPlusOne}p" | sed -ne ";s/^[[:blank:]]*title[[:blank:]]*//p")
defaultEntry=$(echo $defaultEntry | sed -e "s/[[:blank:]]*$//") # don't trust trailing blanks
else
notChangeDefault="yes"
fi
else
notChangeDefault="yes"
fi
case "$host_os" in
freebsd|*/kfreebsd)
if test -e /boot/loader.gz ; then
kernel=/boot/loader.gz
else
kernel=/boot/loader
fi
write_kernel_entry "" "" "" "$grub_root_device" "$kernel" "" "" "" "true" ""
;;
esac
## heres where we start writing out the kernel entries
counter=0
# Xen entries first.
for hypervisor in $hypervisors; do
hypVersion=`basename "$hypervisor" .gz | sed s%xen-%%`
for kern in $xenKernels ; do
if test ! x"$howmany" = x"all" ; then
if [ $counter -gt $howmany ] ; then
break
fi
fi
kernelName=$(basename $kern)
kernelVersion=$(echo $kernelName | sed -e 's/vmlinuz//')
initrdName=$(FindInitrdName "/boot" "$kernelVersion")
initrd=""
kernel=$kernel_dir/$kernelName
if [ -n "$initrdName" ] ; then
initrd=$kernel_dir/$initrdName
fi
echo "Found Xen hypervisor $hypVersion, kernel: $kernel"
kernelVersion=$(echo $kernelVersion | sed -e 's/^-//')
currentOpt=$(get_kernel_opt $kernelVersion)
write_kernel_entry "$kernelVersion" '' '' "$grub_root_device" \
"$kernel" "$currentOpt $xenkopt" '' "$initrd" true '' \
Xen "$kernel_dir/$hypervisor" "$hypVersion" "$xenhopt"
done
done
for kern in $sortedKernels ; do
counter=$(($counter + 1))
if test ! x"$howmany" = x"all" ; then
if [ $counter -gt $howmany ] ; then
break
fi
fi
kernelName=$(basename $kern)
kernelVersion=$(echo $kernelName | sed -e 's/vmlinuz//')
initrdName=$(FindInitrdName "/boot" "$kernelVersion")
initrd=""
kernel=$kernel_dir/$kernelName
if [ -n "$initrdName" ] ; then
initrd=$kernel_dir/$initrdName
fi
echo "Found kernel: $kernel" >&2
if [ "$kernelName" = "vmlinuz" ]; then
if [ -L "/boot/$kernelName" ]; then
kernelVersion=`readlink -f "/boot/$kernelName"`
kernelVersion=$(echo $kernelVersion | sed -e 's/.*vmlinuz-//')
kernelVersion="$kernelVersion Default"
else
kernelVersion="Default"
fi
fi
if [ "$kernelName" = "vmlinuz.old" ]; then
if [ -L "/boot/$kernelName" ]; then
kernelVersion=`readlink -f "/boot/$kernelName"`
kernelVersion=$(echo $kernelVersion | sed -e 's/.*vmlinuz-//')
kernelVersion="$kernelVersion Previous"
else
kernelVersion="Previous"
fi
fi
kernelVersion=$(echo $kernelVersion | sed -e 's/^-//')
currentOpt=$(get_kernel_opt $kernelVersion)
do_lockold=$lockold
# do not lockold for the first entry
[ $counter -eq 1 ] && do_lockold=false
write_kernel_entry "$kernelVersion" "" "" "$grub_root_device" "$kernel" \
"$currentOpt $defoptions" "" "$initrd" "true" "$do_lockold"
# insert the alternative boot options
if test ! x"$alternative" = x"false" ; then
# for each altoptions line do this stuff
sed -ne 's/# altoptions=\(.*\)/\1/p' $buffer | while read line; do
descr=$(echo $line | sed -ne 's/\(([^)]*)\)[[:space:]]\(.*\)/\1/p')
suffix=$(echo $line | sed -ne 's/\(([^)]*)\)[[:space:]]\(.*\)/\2/p')
test x"$lockalternative" = x"true" && do_lockold=false
write_kernel_entry "$kernelVersion" "$descr" "$lockalternative" \
"$grub_root_device" "$kernel" "$currentOpt" "$suffix" "$initrd" \
"true" "$do_lockold"
done
fi
done
memtest86names="memtest86 memtest86+"
if test ! x"$memtest86" = x"false" ; then
for name in $memtest86names ; do
if test -f "/boot/$name.bin" ; then
kernelVersion="$name"
kernel="$kernel_dir/$name.bin"
currentOpt=
initrd=
echo "Found kernel: $kernel" >&2
write_kernel_entry "$kernelVersion" "" "" "$grub_root_device" \
"$kernel" "$currentOpt" "" "$initrd" "false" ""
fi
done
fi
echo $end >> $buffer
echo -n "Updating $menu ... " >&2
# Insert the new options into the menu
if ! grep -q "^$start" $menu ; then
cat $buffer >> $menu
rm -f $buffer
else
umask 077
sed -e "/^$start/,/^$end/{
/^$start/r $buffer
d
}
" $menu > $menu.new
cat $menu.new > $menu
rm -f $buffer $menu.new
fi
# Function to update the default value
set_default_value() {
if [ "$use_grub_set_default" = "true" ] ; then
grub-set-default $1
else
value="$1"
newmenu=$(tempfile)
sed -e "s/^[[:blank:]]*default[[:blank:]]*[[:digit:]]*\(.*\)/default ${value}\1/;b" $menu > $newmenu
cat $newmenu > $menu
rm -f $newmenu
unset newmenu
fi
}
#Updating the default number
if test -z "$notChangeDefault"; then
newDefaultNumberPlusOne=$(grep "^[[:blank:]]*title[[:blank:]]*" $menu | grep -n "${defaultEntry}" | cut -f1 -d ":" | sed -ne "1p")
if test -z "$newDefaultNumberPlusOne"; then
echo "Previous default entry removed, resetting to 0">&2
set_default_value "0"
elif test -z "$defaultEntry"; then
echo "Value of default value matches no entry, resetting to 0" >&2
set_default_value "0"
else
if test "$newDefaultNumberPlusOne" = "1"; then
newDefaultNumber="0"
else
newDefaultNumber=$(expr $newDefaultNumberPlusOne - 1)
fi
echo "Updating the default booting kernel">&2
set_default_value "$newDefaultNumber"
fi
fi
echo "done" >&2
echo >&2
Téma: E: linux-image-2.6.24-23-generic: podproces vrátil chybový status 2 (Přečteno 4241 krát)