Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: nefunkcny compiz na JJ/amd780g [vyriesene]  (Přečteno 1471 krát)

mosqa

  • Stálý člen
  • **
  • Příspěvků: 854
nefunkcny compiz na JJ/amd780g [vyriesene]
« kdy: 11 Května 2009, 01:15:38 »
zdravim, compiz sice nepozuivam, ale ajtak by ma zaujimalo preco mi nejde, resp. ci stym niekto neriesil problem na jj a fglrx ati9.4 [hd3200], kedze tusim ze to bude mat aj daky suvis s prehravanim videa ktore je tiez problemove.. ak spustam compiz cez vzhlad-efekty prostredia, tak to chvilku zapina a potom vypise len: "nemozem povolit efekty prostredia".
vypis z terminalu:
Kód: [Vybrat]
mosqa@mosqa-desktop:~$ SKIP_CHECKS=yes compiz
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log
Detected PCI ID for VGA: Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
Checking for texture_from_pixmap: not present.
Trying again with indirect rendering:
Checking for texture_from_pixmap: present.
Checking for non power of two support: present.
Checking for Composite extension: present.
Checking screen 1Comparing resolution (1440x900) to maximum 3D texture size (8192): Passed.
Checking for Software Rasterizer: Not present.
Checking for nVidia: not present.
Checking for FBConfig: present.
Checking for Xgl: not present.
/usr/bin/compiz.real (core) - Error: Could not acquire compositing manager selection on screen 0 display ":0.0"
/usr/bin/compiz.real (core) - Fatal: No manageable screens found on display :0.0
moj xorg.conf:
Kód: [Vybrat]
Section "Monitor"
Identifier   "aticonfig-Monitor[0]-0"
Option     "VendorName" "ATI Proprietary Driver"
Option     "ModelName" "Generic Autodetecting Monitor"
Option     "DPMS" "true"
EndSection

Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device     "aticonfig-Device[0]-0"
Monitor    "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport   0 0
Depth     24
EndSubSection
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerLayout"
Identifier     "aticonfig Layout"
Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Device"
Identifier "aticonfig-Device[0]-0"
BusID "PCI:1:5:0"
Option "VideoOverlay"    "on"
Option "OpenGLOverlay"   "on"
Option "MigrationHeuristic" "greedy"
Driver "fglrx"
EndSection

Section "ServerFlags"
Option     "DontZap" "false"
EndSection

Section "DRI"
    Group      "video"
    Mode       0666
EndSection

Section "Extensions"
  Option       "Composite" "Enable"
EndSection
teraz som sa este trochu babral s ovladacmi, na slobodnom graficke rozhranie ani nespustim, predtym som mal instalovany podla wiki:
http://wiki.ubuntu.cz/Instalace%20nesvobodn%C3%BDch%20ovlada%C4%8D%C5%AF%20ATI%20(fglrx) metoda dva, teraz [po skuske so slobodnym driverom] som len priamo spustil stiahnuty ovladac [sh ati-driver-installer-*.run] a nahodil xorg.conf zo zalohy a mam len polovicne fps v glxgears, inac zatial vsetko rovnake [problemy s videom - vytazovanie cpu, nemoznost zapnut compiz..]
este pridavam fglrxinfo:
Kód: [Vybrat]
mosqa@mosqa-desktop:~$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 3200 Graphics
OpenGL version string: 2.1.8591
+
Kód: [Vybrat]
mosqa@mosqa-desktop:~$ glxinfo | grep direct
direct rendering: Yes

da sa stym nieco robit [uz len ten prepad fps v glxgears] alebo mam len cakat na novsie ovladace?
« Poslední změna: 11 Května 2009, 17:27:07 od mosqa »
AMD Athlon X2 4850e; GIGABYTE MA78GM-DS2H; IGP ATI HD3200; 2GB (KIT 2x1GB) DDR2 KINGSTON BOX; WD 6400AAKS; SAMSUNG SpinPoint F1 HD322HJ; SAMSUNG SH-S223F SATA; squeezy

olbrait

  • Stálý člen
  • **
  • Příspěvků: 814
  • Registered User #452059
Re: nefunkcny compiz na JJ/amd780g
« Odpověď #1 kdy: 11 Května 2009, 15:54:09 »
ten prepad fps je spôsobený tým, že teraz sa video zobrazuje so zapnutým compizom korektne (predtým ak si presunul okno s videom tak video zostalo na pôvodnommieste a ešte k tomu blikalo, teraz je to všetko v poriadku).
Ten xorg.conf ti vyzerá dosť zložito, v mojom je toho podstatne menej
Kód: [Vybrat]
Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
Defaultdepth 24
EndSection

Section "Module"
Load "glx"
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen "Default Screen"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection

Section "ServerFlags"
Option "DontZap" "False"
EndSection
laptop: HP COMPAQ 6735s, AMD QL-60, ATI HD3200, Ram 1754 MB, HDD 250 GB, Ubuntu 9.04 64bit, Debain Squeeze 64bit. ...Ubunt 9.10 64bit šlo do /dev/null/
desktop: MB SV KT 400, AMD Athlon 2000XP, MSI GeForce MX 440 64 MB, Ram 512 MB, HDD Maxtor 80 GB, Ubuntu 8.04.3
 Linuxák v mojom okolí

mosqa

  • Stálý člen
  • **
  • Příspěvků: 854
Re: nefunkcny compiz na JJ/amd780g
« Odpověď #2 kdy: 11 Května 2009, 17:26:47 »
nekamenujte ma som hlupak..v ubuntu tweak som mal povolene kompozitne efekty metacity, po ich zakazani je vsetko vyriesene [compiz, video, glxgears ako ma byt, w3 cez wine, ..]
AMD Athlon X2 4850e; GIGABYTE MA78GM-DS2H; IGP ATI HD3200; 2GB (KIT 2x1GB) DDR2 KINGSTON BOX; WD 6400AAKS; SAMSUNG SpinPoint F1 HD322HJ; SAMSUNG SH-S223F SATA; squeezy

olbrait

  • Stálý člen
  • **
  • Příspěvků: 814
  • Registered User #452059
Re: nefunkcny compiz na JJ/amd780g [vyriesene]
« Odpověď #3 kdy: 11 Května 2009, 18:24:39 »
pohoda, stáva sa. Niekedy až príliš často :)
laptop: HP COMPAQ 6735s, AMD QL-60, ATI HD3200, Ram 1754 MB, HDD 250 GB, Ubuntu 9.04 64bit, Debain Squeeze 64bit. ...Ubunt 9.10 64bit šlo do /dev/null/
desktop: MB SV KT 400, AMD Athlon 2000XP, MSI GeForce MX 440 64 MB, Ram 512 MB, HDD Maxtor 80 GB, Ubuntu 8.04.3
 Linuxák v mojom okolí

 

Provoz zaštiťuje spolek OpenAlt.