Tak se do toho dáme.
Začal jsem znovu a /etc/grub.d/00_header jsem upravil takto (dle zmiňovaného návodu):
#! /bin/sh -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009 Free Software Foundation, Inc.
#
# GRUB is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# GRUB is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with GRUB. If not, see <http://www.gnu.org/licenses/>.
transform="s,x,x,"
prefix=/usr
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
grub_prefix=`echo /boot/grub | sed ${transform}`
. ${libdir}/grub/grub-mkconfig_lib
# Do this as early as possible, since other commands might depend on it.
# (e.g. the `loadfont' command might need lvm or raid modules)
for i in ${GRUB_PRELOAD_MODULES} ; do
echo "insmod $i"
done
if [ "x${GRUB_DEFAULT}" = "x" ] ; then GRUB_DEFAULT=0 ; fi
if [ "x${GRUB_DEFAULT}" = "xsaved" ] ; then GRUB_DEFAULT='${saved_entry}' ; fi
if [ "x${GRUB_TIMEOUT}" = "x" ] ; then GRUB_TIMEOUT=5 ; fi
if [ "x${GRUB_GFXMODE}" = "x" ] ; then GRUB_GFXMODE=640x480 ; fi
cat << EOF
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="${GRUB_DEFAULT}"
if [ \${prev_saved_entry} ]; then
saved_entry=\${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
EOF
case ${GRUB_TERMINAL_INPUT}:${GRUB_TERMINAL_OUTPUT} in
serial:* | *:serial)
if ! test -e ${grub_prefix}/serial.mod ; then
echo "Serial terminal not available on this platform." >&2 ; exit 1
fi
if [ "x${GRUB_SERIAL_COMMAND}" = "x" ] ; then
grub_warn "Requested serial terminal but GRUB_SERIAL_COMMAND is unspecified. Default parameters will be used."
GRUB_SERIAL_COMMAND=serial
fi
echo "${GRUB_SERIAL_COMMAND}"
;;
esac
case x${GRUB_TERMINAL_INPUT} in
x)
# Just use the native terminal
;;
x*)
cat << EOF
if terminal_input ${GRUB_TERMINAL_INPUT} ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_input
terminal ${GRUB_TERMINAL_INPUT}
fi
EOF
;;
esac
case x${GRUB_TERMINAL_OUTPUT} in
xgfxterm)
# Make the font accessible
prepare_grub_to_access_device `${grub_probe} --target=device ${GRUB_FONT_PATH}`
cat << EOF
if loadfont `make_system_path_relative_to_its_root ${GRUB_FONT_PATH}` ; then
set gfxmode=${GRUB_GFXMODE}
set gfxpayload=keep
insmod gfxmod
insmod ${GRUB_VIDEO_BACKEND}
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
EOF
;;
x)
# Just use the native terminal
;;
x*)
cat << EOF
if terminal_output ${GRUB_TERMINAL_OUTPUT} ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal ${GRUB_TERMINAL_OUTPUT}
fi
EOF
;;
esac
cat << EOF
if [ \${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=${GRUB_TIMEOUT}
fi
EOF
V podstatě šlo o přidání řádky set gfxpayload=keep.
Pak jsem přidal požadované rozlišení do /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=3
GRUB_HIDDEN_TIMEOUT_QUIET=false
GRUB_TIMEOUT="3"
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX=""
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=1280x800
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entrys
#GRUB_DISABLE_LINUX_RECOVERY="true"
Zkoušel jsem i jiné a i ve formátu 0x0367, ale výsledek je pořád stejný. Při bootu se mi totiž zobrazí hláška
error: unknown command 'terminal'a pak se pokračuje v malém a ošklivém rozlišení.
Koukal jsem, že jednomu člověku ze jmenovaného threadu to dělalo také, ale na jeho postupu nevidím vůbec žádnou odlišnost od hlavního navrhovaného postupu, takže nevím, co bych měl udělat jinak.
Ještě přiložím cat /proc/cmdline:
BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=1b1de681-2bf9-4d63-9073-64aa97271d65 ro quiet
A vygenerovaný grub.cfg:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 1b1de681-2bf9-4d63-9073-64aa97271d65
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x800
set gfxpayload=keep
insmod gfxmod
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=3
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Debian, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 1b1de681-2bf9-4d63-9073-64aa97271d65
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=1b1de681-2bf9-4d63-9073-64aa97271d65 ro quiet
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Debian, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 1b1de681-2bf9-4d63-9073-64aa97271d65
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=1b1de681-2bf9-4d63-9073-64aa97271d65 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if sleep --verbose --interruptible 3 ; then
set timeout=0
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
Už si vážně nevím rady a přitom to vypadalo na velmi jednoduchou opravu. Díky za případné rady.
Téma: Rozlišení konzole (Přečteno 9153 krát)
