Ahoj, jak jsem již psal výše, mám problém s xrandr a to takový, že mi vůbec nevypisuje ostatní možnosti připojení zařízení (VGA,...), ani když je do výstupu zapojeno (LCD tv). Tady nějaké info:
roman@enterprise:~$ xrandr --verbose
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1050
default connected 1680x1050+0+0 (0x93) normal (normal) 0mm x 0mm
Identifier: 0x92
Timestamp: 3302816
Subpixel: horizontal rgb
Clones:
CRTC: 0
CRTCs: 0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
1680x1050 (0x93) 105.8MHz *current
h: width 1680 start 0 end 0 total 1680 skew 0 clock 63.0KHz
v: height 1050 start 0 end 0 total 1050 clock 60.0Hz
1680x1050 (0x94) 88.2MHz
h: width 1680 start 0 end 0 total 1680 skew 0 clock 52.5KHz
v: height 1050 start 0 end 0 total 1050 clock 50.0Hz
1440x900 (0x95) 77.8MHz
h: width 1440 start 0 end 0 total 1440 skew 0 clock 54.0KHz
v: height 900 start 0 end 0 total 900 clock 60.0Hz
1400x1050 (0x96) 88.2MHz
h: width 1400 start 0 end 0 total 1400 skew 0 clock 63.0KHz
v: height 1050 start 0 end 0 total 1050 clock 60.0Hz
1280x1024 (0x97) 78.6MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 61.4KHz
v: height 1024 start 0 end 0 total 1024 clock 60.0Hz
1280x960 (0x98) 73.7MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 57.6KHz
v: height 960 start 0 end 0 total 960 clock 60.0Hz
1280x768 (0x99) 59.0MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 46.1KHz
v: height 768 start 0 end 0 total 768 clock 60.0Hz
1280x720 (0x9a) 55.3MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 43.2KHz
v: height 720 start 0 end 0 total 720 clock 60.0Hz
1280x720 (0x9b) 46.1MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 36.0KHz
v: height 720 start 0 end 0 total 720 clock 50.0Hz
1152x864 (0x9c) 59.7MHz
h: width 1152 start 0 end 0 total 1152 skew 0 clock 51.8KHz
v: height 864 start 0 end 0 total 864 clock 60.0Hz
1024x768 (0x9d) 47.2MHz
h: width 1024 start 0 end 0 total 1024 skew 0 clock 46.1KHz
v: height 768 start 0 end 0 total 768 clock 60.0Hz
1024x600 (0x9e) 36.9MHz
h: width 1024 start 0 end 0 total 1024 skew 0 clock 36.0KHz
v: height 600 start 0 end 0 total 600 clock 60.0Hz
1024x480 (0x9f) 29.5MHz
h: width 1024 start 0 end 0 total 1024 skew 0 clock 28.8KHz
v: height 480 start 0 end 0 total 480 clock 60.0Hz
800x600 (0xa0) 28.8MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 36.0KHz
v: height 600 start 0 end 0 total 600 clock 60.0Hz
800x480 (0xa1) 23.0MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 28.8KHz
v: height 480 start 0 end 0 total 480 clock 60.0Hz
720x480 (0xa2) 20.7MHz
h: width 720 start 0 end 0 total 720 skew 0 clock 28.8KHz
v: height 480 start 0 end 0 total 480 clock 60.0Hz
640x480 (0xa3) 18.4MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 28.8KHz
v: height 480 start 0 end 0 total 480 clock 60.0Hz
640x400 (0xa4) 15.4MHz
h: width 640 start 0 end 0 total 640 skew 0 clock 24.0KHz
v: height 400 start 0 end 0 total 400 clock 60.0Hz
512x384 (0xa5) 11.8MHz
h: width 512 start 0 end 0 total 512 skew 0 clock 23.0KHz
v: height 384 start 0 end 0 total 384 clock 60.0Hz
400x300 (0xa6) 7.2MHz
h: width 400 start 0 end 0 total 400 skew 0 clock 18.0KHz
v: height 300 start 0 end 0 total 300 clock 60.0Hz
320x240 (0xa7) 4.6MHz
h: width 320 start 0 end 0 total 320 skew 0 clock 14.4KHz
v: height 240 start 0 end 0 total 240 clock 60.0Hz
320x200 (0xa8) 3.8MHz
h: width 320 start 0 end 0 total 320 skew 0 clock 12.0KHz
v: height 200 start 0 end 0 total 200 clock 60.0Hz
1280x1024 (0xcf) 61.6MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 48.1KHz
v: height 1024 start 0 end 0 total 1024 clock 47.0Hz
1280x1024 (0xd0) 56.4MHz
h: width 1280 start 0 end 0 total 1280 skew 0 clock 44.0KHz
v: height 1024 start 0 end 0 total 1024 clock 43.0Hz
1152x864 (0xd1) 46.8MHz
h: width 1152 start 0 end 0 total 1152 skew 0 clock 40.6KHz
v: height 864 start 0 end 0 total 864 clock 47.0Hz
1152x864 (0xd2) 42.8MHz
h: width 1152 start 0 end 0 total 1152 skew 0 clock 37.2KHz
v: height 864 start 0 end 0 total 864 clock 43.0Hz
1024x768 (0xd3) 33.8MHz
h: width 1024 start 0 end 0 total 1024 skew 0 clock 33.0KHz
v: height 768 start 0 end 0 total 768 clock 43.0Hz
800x600 (0xd4) 26.9MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 33.6KHz
v: height 600 start 0 end 0 total 600 clock 56.0Hz
800x600 (0xd5) 22.6MHz
h: width 800 start 0 end 0 total 800 skew 0 clock 28.2KHz
v: height 600 start 0 end 0 total 600 clock 47.0Hz
Dále můj xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "off"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "amdcccle-Monitor[1]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "UseFastTLS" "2"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "amdcccle-Device[1]-1"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "amdcccle-Screen[1]-1"
Device "amdcccle-Device[1]-1"
Monitor "amdcccle-Monitor[1]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Dříve po připojení LCD tv a použití příkazu xrandr --output LCD --off --output CRT1 --auto se vypl displej na noťasu a následně zapla plocha na tv, teď přikaz neudělá nic, což silně souvisí i s hláškou po použití Systém/Volby/Displej: Zdá se, že váš grafický ovladač nepodporuje rozšíření nezbytná pro použití tohoto nástroje. Chcete místo něj použít nástroj výrobce vašeho grafického ovladače?. No tak zvolím ano, spustí se amdcccle, kde upravím rozlišení tv, na které mi už teď jede plocha, ale xrandr furt vidí jen ten dispej noťasu. Můj horký tip na favorita problému je xorg.conf, ale nevím co s ním, aby vše fungovalo jako dřív.
Předem díky za jakékoli info. Roman
[attachment deleted by admin]
Téma: Problém s xrandr (Přečteno 1372 krát)
