Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: po prechode na ubuntu 10.10 nenasla sa web camera  (Přečteno 1225 krát)

tesla

  • Návštěvník
  • Příspěvků: 31
po prechode na ubuntu 10.10 nenasla sa web camera
« kdy: 16 Října 2010, 08:51:36 »
mam taky problem presiel som na ubuntu 10.10 a v nastaveniach skype mi neukazuje ziadnu web cameru. Pouzivam NB sony vaio a pod ubuntu 9.10 a menej som s tym nikdy nemal problem... nevie niekto poradit?
« Poslední změna: 16 Října 2010, 09:10:12 od tesla »
Ubuntu 8.04, Asus A6 Vm, Intel 1,8  centrino, 1024 RAM, nVidia Geforce Go 7300

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po prechode na ubuntu 10.10 nenasla sa web camera
« Odpověď #1 kdy: 16 Října 2010, 16:30:15 »
Nahraješ prosím někam, třeba na Ubuntu pastebin, výpis z Terminálu z příkazů
Kód: [Vybrat]
lsusb
dmesg
http://www.openstreetmap.org - mapy celého světa "wiki style"

tesla

  • Návštěvník
  • Příspěvků: 31
Re: po prechode na ubuntu 10.10 nenasla sa web camera
« Odpověď #2 kdy: 16 Října 2010, 17:40:34 »
t pref]
[    0.264609] pci 0000:00:1c.2: PCI bridge to [bus 07-07]
[    0.264613] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
[    0.264620] pci 0000:00:1c.2:   bridge window [mem 0xf8000000-0xf80fffff]
[    0.264626] pci 0000:00:1c.2:   bridge window [mem 0x84200000-0x843fffff 64bit pref]
[    0.264635] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
[    0.264639] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.264646] pci 0000:00:1c.3:   bridge window [mem 0xf6000000-0xf7ffffff]
[    0.264652] pci 0000:00:1c.3:   bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.264662] pci 0000:09:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.264666] pci 0000:09:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.264669] pci 0000:09:04.0: BAR 0: assigned [mem 0xf8206000-0xf8206fff]
[    0.264676] pci 0000:09:04.0: BAR 0: set to [mem 0xf8206000-0xf8206fff] (PCI address [0xf8206000-0xf8206fff]
[    0.264680] pci 0000:09:04.0: BAR 13: assigned [io  0x6000-0x60ff]
[    0.264683] pci 0000:09:04.0: BAR 14: assigned [io  0x6400-0x64ff]
[    0.264685] pci 0000:09:04.0: CardBus bridge to [bus 0a-0d]
[    0.264687] pci 0000:09:04.0:   bridge window [io  0x6000-0x60ff]
[    0.264694] pci 0000:09:04.0:   bridge window [io  0x6400-0x64ff]
[    0.264700] pci 0000:09:04.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.264707] pci 0000:09:04.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.264713] pci 0000:00:1e.0: PCI bridge to [bus 09-0a]
[    0.264717] pci 0000:00:1e.0:   bridge window [io  0x6000-0x6fff]
[    0.264724] pci 0000:00:1e.0:   bridge window [mem 0xf8200000-0xf82fffff]
[    0.264730] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.264757]   alloc irq_desc for 16 on node -1
[    0.264760]   alloc kstat_irqs on node -1
[    0.264768] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.264777] pci 0000:00:1c.0: setting latency timer to 64
[    0.264790]   alloc irq_desc for 17 on node -1
[    0.264791]   alloc kstat_irqs on node -1
[    0.264796] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.264802] pci 0000:00:1c.1: setting latency timer to 64
[    0.264814]   alloc irq_desc for 18 on node -1
[    0.264816]   alloc kstat_irqs on node -1
[    0.264820] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.264826] pci 0000:00:1c.2: setting latency timer to 64
[    0.264838]   alloc irq_desc for 19 on node -1
[    0.264840]   alloc kstat_irqs on node -1
[    0.264843] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.264849] pci 0000:00:1c.3: setting latency timer to 64
[    0.264860] pci 0000:00:1e.0: setting latency timer to 64
[    0.264894] pci 0000:09:04.0: power state changed by ACPI to D0
[    0.264903] pci 0000:09:04.0: power state changed by ACPI to D0
[    0.264911]   alloc irq_desc for 20 on node -1
[    0.264913]   alloc kstat_irqs on node -1
[    0.264917] pci 0000:09:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.264925] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.264928] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.264931] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.264933] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[    0.264936] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.264939] pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
[    0.264941] pci_bus 0000:06: resource 1 [mem 0xf8100000-0xf81fffff]
[    0.264944] pci_bus 0000:06: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
[    0.264946] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
[    0.264949] pci_bus 0000:07: resource 1 [mem 0xf8000000-0xf80fffff]
[    0.264951] pci_bus 0000:07: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
[    0.264954] pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
[    0.264957] pci_bus 0000:08: resource 1 [mem 0xf6000000-0xf7ffffff]
[    0.264959] pci_bus 0000:08: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[    0.264962] pci_bus 0000:09: resource 0 [io  0x6000-0x6fff]
[    0.264965] pci_bus 0000:09: resource 1 [mem 0xf8200000-0xf82fffff]
[    0.264967] pci_bus 0000:09: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.264970] pci_bus 0000:09: resource 4 [io  0x0000-0xffff]
[    0.264972] pci_bus 0000:09: resource 5 [mem 0x00000000-0xffffffff]
[    0.264975] pci_bus 0000:0a: resource 0 [io  0x6000-0x60ff]
[    0.264977] pci_bus 0000:0a: resource 1 [io  0x6400-0x64ff]
[    0.264980] pci_bus 0000:0a: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.264982] pci_bus 0000:0a: resource 3 [mem 0x88000000-0x8bffffff]
[    0.265034] NET: Registered protocol family 2
[    0.265116] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.265438] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.266027] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.266326] TCP: Hash tables configured (established 131072 bind 65536)
[    0.266329] TCP reno registered
[    0.266332] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.266345] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.266449] NET: Registered protocol family 1
[    0.266473] pci 0000:00:02.0: Boot video device
[    0.266651] PCI: CLS 64 bytes, default 64
[    0.266687] Simple Boot Flag at 0x36 set to 0x1
[    0.266906] cpufreq-nforce2: No nForce2 chipset.
[    0.266940] Scanning for low memory corruption every 60 seconds
[    0.267070] audit: initializing netlink socket (disabled)
[    0.267083] type=2000 audit(1287249992.260:1): initialized
[    0.278243] highmem bounce pool size: 64 pages
[    0.278249] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.279887] VFS: Disk quotas dquot_6.5.2
[    0.279956] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.280613] fuse init (API version 7.14)
[    0.280711] msgmni has been set to 1683
[    0.281033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.281037] io scheduler noop registered
[    0.281039] io scheduler deadline registered
[    0.281052] io scheduler cfq registered (default)
[    0.281200] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.281261]   alloc irq_desc for 40 on node -1
[    0.281263]   alloc kstat_irqs on node -1
[    0.281278] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.281396] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.281451]   alloc irq_desc for 41 on node -1
[    0.281453]   alloc kstat_irqs on node -1
[    0.281463] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.281581] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.281636]   alloc irq_desc for 42 on node -1
[    0.281638]   alloc kstat_irqs on node -1
[    0.281649] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.281768] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.281822]   alloc irq_desc for 43 on node -1
[    0.281824]   alloc kstat_irqs on node -1
[    0.281834] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.281976] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.281994] Firmware did not grant requested _OSC control
[    0.282003] Firmware did not grant requested _OSC control
[    0.282010] Firmware did not grant requested _OSC control
[    0.282017] Firmware did not grant requested _OSC control
[    0.282039] Firmware did not grant requested _OSC control
[    0.282046] Firmware did not grant requested _OSC control
[    0.282053] Firmware did not grant requested _OSC control
[    0.282060] Firmware did not grant requested _OSC control
[    0.282069] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.282178] intel_idle: MWAIT substates: 0x22220
[    0.282181] intel_idle: does not run on family 6 model 15
[    0.282479] ACPI: AC Adapter [ACAD] (on-line)
[    0.282558] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.282718] ACPI: Lid Switch [LID0]
[    0.282769] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.282779] ACPI: Power Button [PWRB]
[    0.283310] ACPI: acpi_idle registered with cpuidle
[    0.291902] Monitor-Mwait will be used to enter C-1 state
[    0.292251] Monitor-Mwait will be used to enter C-2 state
[    0.292261] Marking TSC unstable due to TSC halts in idle
[    0.292938] Switching to clocksource hpet
[    0.305542] thermal LNXTHERM:01: registered as thermal_zone0
[    0.305551] ACPI: Thermal Zone [ATF0] (74 C)
[    0.306383] thermal LNXTHERM:02: registered as thermal_zone1
[    0.306394] ACPI: Thermal Zone [DTS0] (78 C)
[    0.307236] thermal LNXTHERM:03: registered as thermal_zone2
[    0.307244] ACPI: Thermal Zone [DTS1] (75 C)
[    0.307375] ERST: Table is not found!
[    0.307654] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.309438] brd: module loaded
[    0.310051] loop: module loaded
[    0.310251] ata_piix 0000:00:1f.1: version 2.13
[    0.310268] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    0.310275] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[    0.310286]   alloc irq_desc for 22 on node -1
[    0.310288]   alloc kstat_irqs on node -1
[    0.310295] ata_piix 0000:00:1f.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.310342] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.313338] ACPI: Battery Slot [BAT1] (battery present)
[    0.313352] isapnp: Scanning for PnP cards...
[    0.318878] scsi0 : ata_piix
[    0.362599] scsi1 : ata_piix
[    0.363303] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.363307] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.363366] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.363376] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    0.363516] ata2: port disabled. ignoring.
[    0.443768] Freeing initrd memory: 10512k freed
[    0.520048] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.520179] scsi2 : ata_piix
[    0.520282] scsi3 : ata_piix
[    0.521430] ata3: SATA max UDMA/133 cmd 0x18d0 ctl 0x18c4 bmdma 0x18b0 irq 22
[    0.521434] ata4: SATA max UDMA/133 cmd 0x18c8 ctl 0x18c0 bmdma 0x18b8 irq 22
[    0.521843] Fixed MDIO Bus: probed
[    0.521884] PPP generic driver version 2.4.2
[    0.521981] tun: Universal TUN/TAP device driver, 1.6
[    0.521984] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.522099] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.522130]   alloc irq_desc for 23 on node -1
[    0.522132]   alloc kstat_irqs on node -1
[    0.522142] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.522169] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.522174] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.522213] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.522235] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.522252] ehci_hcd 0000:00:1d.7: debug port 1
[    0.526151] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.526167] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8644000
[    0.530580] ata1.00: ATAPI: MATSHITADVD-RAM UJ-852S, 1.50, max UDMA/33
[    0.541039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.541172] hub 1-0:1.0: USB hub found
[    0.541179] hub 1-0:1.0: 8 ports detected
[    0.541279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.541295] uhci_hcd: USB Universal Host Controller Interface driver
[    0.541344] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.541352] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.541356] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.541392] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.541431] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
[    0.541560] hub 2-0:1.0: USB hub found
[    0.541565] hub 2-0:1.0: 2 ports detected
[    0.541634] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.541641] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.541646] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.541686] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.541714] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    0.541841] hub 3-0:1.0: USB hub found
[    0.541845] hub 3-0:1.0: 2 ports detected
[    0.541916] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    0.541924] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.541928] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.541964] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.541992] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001860
[    0.542127] hub 4-0:1.0: USB hub found
[    0.542131] hub 4-0:1.0: 2 ports detected
[    0.542201] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.542209] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.542213] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.542249] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.542277] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[    0.542403] hub 5-0:1.0: USB hub found
[    0.542408] hub 5-0:1.0: 2 ports detected
[    0.542555] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.544752] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.544759] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.544893] mice: PS/2 mouse device common for all mice
[    0.545457] ata1.00: configured for UDMA/33
[    0.545575] rtc_cmos 00:07: RTC can wake from S4
[    0.545618] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    0.545651] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.545768] device-mapper: uevent: version 1.0.3
[    0.545894] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    0.545967] device-mapper: multipath: version 1.1.1 loaded
[    0.545970] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.546098] EISA: Probing bus 0 at eisa.0
[    0.546105] Cannot allocate resource for EISA slot 1
[    0.546108] Cannot allocate resource for EISA slot 2
[    0.546110] Cannot allocate resource for EISA slot 3
[    0.546113] Cannot allocate resource for EISA slot 4
[    0.546115] Cannot allocate resource for EISA slot 5
[    0.546117] Cannot allocate resource for EISA slot 6
[    0.546128] EISA: Detected 0 cards.
[    0.546267] cpuidle: using governor ladder
[    0.546360] cpuidle: using governor menu
[    0.546710] TCP cubic registered
[    0.546856] NET: Registered protocol family 10
[    0.547268] lo: Disabled Privacy Extensions
[    0.547534] NET: Registered protocol family 17
[    0.548172] Using IPI No-Shortcut mode
[    0.548257] PM: Resume from disk failed.
[    0.548273] registered taskstats version 1
[    0.548689]   Magic number: 14:404:441
[    0.548734] pcieport 0000:00:1c.2: hash matches
[    0.548810] rtc_cmos 00:07: setting system clock to 2010-10-16 17:26:32 UTC (1287249992)
[    0.548814] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.548816] EDD information not available.
[    0.568093] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.668842] isapnp: No Plug & Play device found
[    0.670808] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-852S  1.50 PQ: 0 ANSI: 5
[    0.675359] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.675365] Uniform CD-ROM driver Revision: 3.20
[    0.675569] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.675648] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.695848] ata3.00: ATA-7: SAMSUNG HM160JI, AD100-11, max UDMA/100
[    0.695855] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.704532] ata3.00: configured for UDMA/100
[    0.704756] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HM160JI  AD10 PQ: 0 ANSI: 5
[    0.704986] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    0.704998] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    0.705051] sd 2:0:0:0: [sda] Write Protect is off
[    0.705054] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.705115] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.705411]  sda: sda1 < sda5 > sda2 sda3 sda4
[    0.767642] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.767660] Freeing unused kernel memory: 684k freed
[    0.768113] Write protecting the kernel text: 4932k
[    0.768166] Write protecting the kernel read-only data: 1976k
[    0.786656] udev[87]: starting version 163
[    0.897165]   alloc irq_desc for 21 on node -1
[    0.897169]   alloc kstat_irqs on node -1
[    0.897178] firewire_ohci 0000:09:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.910707] sky2: driver version 1.28
[    0.910752] sky2 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.910767] sky2 0000:07:00.0: setting latency timer to 64
[    0.910804] sky2 0000:07:00.0: Yukon-2 FE chip revision 1
[    0.910915]   alloc irq_desc for 44 on node -1
[    0.910917]   alloc kstat_irqs on node -1
[    0.910935] sky2 0000:07:00.0: irq 44 for MSI/MSI-X
[    0.940073] sky2 0000:07:00.0: eth0: addr 00:13:a9:8d:ff:c0
[    0.953111] firewire_ohci: Added fw-ohci device 0000:09:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[    1.100057] usb 1-6: new high speed USB device using ehci_hcd and address 4
[    1.436834] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.456204] firewire_core: created device fw0: GUID 08004603024a5d1b, S400
[    1.593069] usb 2-1: new full speed USB device using uhci_hcd and address 2
[    2.024053] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    2.444159] usb 5-2: new full speed USB device using uhci_hcd and address 2
[   12.853778] udev[385]: starting version 163
[   12.925558] Adding 2216932k swap on /dev/sda5.  Priority:-1 extents:1 across:2216932k
[   12.949494] lp: driver loaded but no devices found
[   12.951627] intel_rng: FWH not detected
[   13.015626] leds_ss4200: no LED devices found
[   13.153740] yenta_cardbus 0000:09:04.0: CardBus bridge found [104d:81e6]
[   13.153768] yenta_cardbus 0000:09:04.0: Using CSCINT to route CSC interrupts to PCI
[   13.153771] yenta_cardbus 0000:09:04.0: Routing CardBus interrupts to PCI
[   13.153778] yenta_cardbus 0000:09:04.0: TI: mfunc 0x01a21b22, devctl 0x64
[   13.154057] Linux agpgart interface v0.103
[   13.157124] cfg80211: Calling CRDA to update world regulatory domain
[   13.157728] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[   13.158957] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[   13.167673] sony-laptop: Sony Programmable IO Control Driver v0.6.
[   13.167692] sony-laptop: detected Type3 model
[   13.233732] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   13.252481] Bluetooth: Core ver 2.15
[   13.252537] NET: Registered protocol family 31
[   13.252540] Bluetooth: HCI device and connection manager initialized
[   13.252542] Bluetooth: HCI socket layer initialized
[   13.285653] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   13.285768] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[   13.286408] Linux video capture interface: v2.00
[   13.290469] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:1835)
[   13.295655] cfg80211: World regulatory domain updated:
[   13.295659]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   13.295662]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.295665]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.295669]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   13.295671]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.295674]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   13.305279] input: UVC Camera (05ca:1835) as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input3
[   13.305357] usbcore: registered new interface driver uvcvideo
[   13.305360] USB Video Class driver (v0.1.0)
[   13.308470] usbcore: registered new interface driver btusb
[   13.349348] input: Sony Vaio Keys as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:34/SNY6001:00/input/input4
[   13.349444] input: Sony Vaio Jogdial as /devices/virtual/input/input5
[   13.349535] sony-laptop: device allocated minor is 55
[   13.350623] acpi device:04: registered as cooling_device2
[   13.350746] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
[   13.350816] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   13.352071] usbcore: registered new interface driver hiddev
[   13.355964] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input7
[   13.356072] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1/input0
[   13.359215] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input8
[   13.359958] generic-usb 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1/input1
[   13.365186] sony-laptop: Sony Notebook Control Driver v0.6.
[   13.365194] sony-laptop: brightness ignored, must be controlled by ACPI video driver
[   13.372964] generic-usb 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1/input2
[   13.372994] usbcore: registered new interface driver usbhid
[   13.372997] usbhid: USB HID core driver
[   13.398737] yenta_cardbus 0000:09:04.0: ISA IRQ mask 0x0cb8, PCI irq 20
[   13.398742] yenta_cardbus 0000:09:04.0: Socket status: 30000006
[   13.398747] pci_bus 0000:09: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[   13.398759] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [io  0x6000-0x6fff]
[   13.398763] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x6000-0x6fff: excluding 0x6000-0x60ff 0x6400-0x64ff
[   13.408719] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0xf8200000-0xf82fffff]
[   13.408724] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8200000-0xf82fffff: excluding 0xf8200000-0xf820ffff
[   13.408741] yenta_cardbus 0000:09:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[   13.408827] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[   13.426860] tifm_7xx1 0000:09:04.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   13.452183] [drm] Initialized drm 1.1.0 20060810
[   13.475134] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   13.475138] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[   13.475210] iwl3945 0000:06:00.0: power state changed by ACPI to D0
[   13.475225] iwl3945 0000:06:00.0: power state changed by ACPI to D0
[   13.475243] iwl3945 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.475258] iwl3945 0000:06:00.0: setting latency timer to 64
[   13.502687] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.502697] i915 0000:00:02.0: setting latency timer to 64
[   13.523024] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9
[   13.524335] type=1400 audit(1287242805.473:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=707 comm="apparmor_parser"
[   13.525125] type=1400 audit(1287242805.473:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=707 comm="apparmor_parser"
[   13.525566] type=1400 audit(1287242805.473:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=707 comm="apparmor_parser"
[   13.538067] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[   13.546657] iwl3945 0000:06:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[   13.546662] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   13.546781]   alloc irq_desc for 45 on node -1
[   13.546783]   alloc kstat_irqs on node -1
[   13.546817] iwl3945 0000:06:00.0: irq 45 for MSI/MSI-X
[   13.560155] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   13.561948] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[   13.562705] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   13.563327] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   13.564398] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xdc000-0xfffff
[   13.564468] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   13.564646] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   13.564716] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   13.575382] [drm] set up 7M of stolen space
[   13.583714] phy0: Selected rate control algorithm 'iwl-3945-rs'
[   13.584487] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   13.585746] [drm] initialized overlay support
[   13.762878] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   14.377319] Console: switching to colour frame buffer device 160x50
[   14.381203] fb0: inteldrmfb frame buffer device
[   14.381205] drm: registered panic notifier
[   14.381208] Slow work thread pool: Starting up
[   14.381304] Slow work thread pool: Ready
[   14.381316] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   14.381608] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   14.382845] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   14.382857] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   14.382921]   alloc irq_desc for 46 on node -1
[   14.382924]   alloc kstat_irqs on node -1
[   14.382940] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   14.382982] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.456607] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.456840] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.886872] ppdev: user-space parallel port driver
[   14.906419] type=1400 audit(1287242806.853:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1085 comm="apparmor_parser"
[   14.910204] type=1400 audit(1287242806.857:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1086 comm="apparmor_parser"
[   14.911175] type=1400 audit(1287242806.857:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1086 comm="apparmor_parser"
[   14.911585] type=1400 audit(1287242806.857:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1086 comm="apparmor_parser"
[   14.917696] type=1400 audit(1287242806.865:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1096 comm="apparmor_parser"
[   14.918293] type=1400 audit(1287242806.865:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1088 comm="apparmor_parser"
[   14.918610] type=1400 audit(1287242806.865:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1096 comm="apparmor_parser"
[   14.921226] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9
[   15.001452] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.005670] sky2 0000:07:00.0: eth0: enabling interface
[   15.006140] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.169665] Bluetooth: L2CAP ver 2.14
[   15.169668] Bluetooth: L2CAP socket layer initialized
[   15.174897] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.174900] Bluetooth: BNEP filters: protocol multicast
[   15.179653] Bluetooth: SCO (Voice Link) ver 0.6
[   15.179656] Bluetooth: SCO socket layer initialized
[   15.456982] Bluetooth: RFCOMM TTY layer initialized
[   15.456988] Bluetooth: RFCOMM socket layer initialized
[   15.456991] Bluetooth: RFCOMM ver 1.11
[   16.933698] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   18.579423] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[   23.147363] wlan0: authenticate with 00:22:b0:0d:63:d6 (try 1)
[   23.150146] wlan0: authenticated
[   23.150646] wlan0: associate with 00:22:b0:0d:63:d6 (try 1)
[   23.153298] wlan0: RX AssocResp from 00:22:b0:0d:63:d6 (capab=0x411 status=0 aid=1)
[   23.153302] wlan0: associated
[   23.154779] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   30.990339] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[   33.177016] wlan0: no IPv6 routers present
[   33.662487] lo: Disabled Privacy Extensions
Ubuntu 8.04, Asus A6 Vm, Intel 1,8  centrino, 1024 RAM, nVidia Geforce Go 7300

arrange

  • Závislák
  • ***
  • Příspěvků: 4031
  • "jdu s hlavou vztyčenou..."
Re: po prechode na ubuntu 10.10 nenasla sa web camera
« Odpověď #3 kdy: 16 Října 2010, 17:48:47 »
Ta kamera je tam normálně vidět jako funkční.
Zkus vypnout Skype, přejmenovat adresář ~/.Skype na ~/.Skype.zaloha, spusť Skype znova, a spusť test videa.
Pokud nepomůže, vyzkoušej funkčnost kamery v jiném programu.
http://forum.ubuntu.cz/index.php?topic=30530.0
http://www.openstreetmap.org - mapy celého světa "wiki style"

tesla

  • Návštěvník
  • Příspěvků: 31
Re: po prechode na ubuntu 10.10 nenasla sa web camera
« Odpověď #4 kdy: 16 Října 2010, 17:56:39 »
vdaka to premenovanie pomohlo..  ;)
Ubuntu 8.04, Asus A6 Vm, Intel 1,8  centrino, 1024 RAM, nVidia Geforce Go 7300

 

Provoz zaštiťuje spolek OpenAlt.