WIFI notebook asus

[skaut1]

Zdravím,
přešel jsem z xpéček na ubuntu 10.10, s ničím nebyl problém, jen s wifinou. Mám kartu do pcmcia avaya, nejede a notebook asus A4708DBH wifi taky nejede. Pokud dám lspci tak ve výpisu je jen marwell ethernet, ale nedetekuje vůbec tu wifi. Přinejhorším můžu valit na drátu, ale přecejen když wifi tu je, tak proč to nevyužít.Poradí někdo? hledal jsem na foru, ale nedařilo se mi.

[jAster_BA]

Kód: [Vybrat]

lscpi | grep -i wireless a výpis sem.

[skaut1]

Kód: [Vybrat]

lscpi | grep -i wireless a výpis sem.

pepa@pepa-A4D:~$ lscpi | grep -i wireless
No command 'lscpi' found, did you mean:
 Command 'lscpu' from package 'util-linux' (main)
 Command 'lscp' from package 'nilfs-tools' (universe)
 Command 'lspci' from package 'pciutils' (main)
lscpi: command not found
 když bych dal lspci a jak jsi to napsal dál, tak to neudělá nic

[Rover623]

Abych to pochopil,máš kartu do picmac slotu která nefunguje a zároveň má ten notebook i vlastní Wi-fi která taky nefunguje.Nicméně k tomu notebooku se mi nedaří najít specifikaci té vnitřní Wi-fi karty,o výrobci nebo alespoň čipu nikde není ani píp,tak jsem se zaměřil na zprovoznění té externí a tady je postup http://www.abclinuxu.cz/hardware/pripojeni-na-sit/bezdratove/pcmcia/avaya-gold-pc-card

[skaut1]

Abych to pochopil,máš kartu do picmac slotu která nefunguje a zároveň má ten notebook i vlastní Wi-fi která taky nefunguje.Nicméně k tomu notebooku se mi nedaří najít specifikaci té vnitřní Wi-fi karty,o výrobci nebo alespoň čipu nikde není ani píp,tak jsem se zaměřil na zprovoznění té externí a tady je postup http://www.abclinuxu.cz/hardware/pripojeni-na-sit/bezdratove/pcmcia/avaya-gold-pc-card

jj, tak to je. interní a ani externí zatím nevalí, zkusím tu externí dle tvých instrukcí a pak dám vědět. zatím díky

[jAster_BA]

Kód: [Vybrat]

lscpi | grep -i wireless a výpis sem.

pepa@pepa-A4D:~$ lscpi | grep -i wireless
No command 'lscpi' found, did you mean:
 Command 'lscpu' from package 'util-linux' (main)
 Command 'lscp' from package 'nilfs-tools' (universe)
 Command 'lspci' from package 'pciutils' (main)
lscpi: command not found
 když bych dal lspci a jak jsi to napsal dál, tak to neudělá nic

Áno má to byť lspci...skús sem dať výpis

Kód: [Vybrat]

lspci -nnk

[skaut1]

Kód: [Vybrat]

lscpi | grep -i wireless a výpis sem.

pepa@pepa-A4D:~$ lscpi | grep -i wireless
No command 'lscpi' found, did you mean:
 Command 'lscpu' from package 'util-linux' (main)
 Command 'lscp' from package 'nilfs-tools' (universe)
 Command 'lspci' from package 'pciutils' (main)
lscpi: command not found
 když bych dal lspci a jak jsi to napsal dál, tak to neudělá nic

výpis :
pepa@pepa-A4D:~$ lspci -nnk
00:00.0 Host bridge [0600]: nVidia Corporation nForce3 Host Bridge [10de:00d1] (rev a4)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
   Kernel driver in use: agpgart-amd64
   Kernel modules: amd64-agp
00:01.0 ISA bridge [0601]: nVidia Corporation nForce3 LPC Bridge [10de:00d0] (rev f6)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
00:01.1 SMBus [0c05]: nVidia Corporation nForce3 SMBus [10de:00d4] (rev a4)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
   Kernel driver in use: nForce2_smbus
   Kernel modules: i2c-nforce2
00:02.0 USB Controller [0c03]: nVidia Corporation nForce3 USB 1.1 [10de:00d7] (rev a5)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
   Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation nForce3 USB 1.1 [10de:00d7] (rev a5)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
   Kernel driver in use: ohci_hcd
00:02.2 USB Controller [0c03]: nVidia Corporation nForce3 USB 2.0 [10de:00d8] (rev a2)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
   Kernel driver in use: ehci_hcd
00:06.0 Multimedia audio controller [0401]: nVidia Corporation nForce3 Audio [10de:00da] (rev a2)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1983]
   Kernel driver in use: Intel ICH
   Kernel modules: snd-intel8x0
00:06.1 Modem [0703]: nVidia Corporation nForce3 Audio [10de:00d9] (rev a2)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1856]
   Kernel modules: snd-intel8x0m
00:08.0 IDE interface [0101]: nVidia Corporation nForce3 IDE [10de:00d5] (rev a5)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
   Kernel driver in use: pata_amd
   Kernel modules: pata_amd
00:0a.0 PCI bridge [0604]: nVidia Corporation nForce3 PCI Bridge [10de:00dd] (rev a2)
   Kernel modules: shpchp
00:0b.0 PCI bridge [0604]: nVidia Corporation nForce3 AGP Bridge [10de:00d2] (rev a4)
   Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
   Kernel driver in use: k8temp
   Kernel modules: k8temp
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M9+ 5C61 [Radeon Mobility 9200 (AGP)] [1002:5c61] (rev 01)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1732]
   Kernel driver in use: radeon
   Kernel modules: radeon, radeonfb
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
   Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:173c]
   Kernel driver in use: skge
   Kernel modules: skge
02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
   Subsystem: ASUSTeK Computer Inc. Asus A4K and Z81K notebooks, possibly others ( mid-2005 machines ) [1043:1987]
   Kernel driver in use: yenta_cardbus
   Kernel modules: yenta_socket
02:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
   Kernel driver in use: firewire_ohci
   Kernel modules: firewire-ohci, ohci1394
02:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]
   Kernel driver in use: sdhci-pci
   Kernel modules: sdhci-pci
02:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
   Subsystem: ASUSTeK Computer Inc. Device [1043:1987]

Áno má to byť lspci...skús sem dať výpis

Kód: [Vybrat]

lspci -nnk

[jAster_BA]

Nainštalujeme hwinfo

Kód: [Vybrat]

sudo apt-get install hwinfo a potom

Kód: [Vybrat]

hwinfo --wlan a

Kód: [Vybrat]

hwinfo --pcmcia

[skaut1]

Nainštalujeme hwinfo

Kód: [Vybrat]

sudo apt-get install hwinfo a potom

Kód: [Vybrat]

hwinfo --wlan a

Kód: [Vybrat]

hwinfo --pcmcia

tak jsem nainstaloval hwinfo dle instrukci, pak spustil dalsi dva příkazy.. karta zatím ještě nepracuje.. výpis zde..
pepa@pepa-A4D:~$ hwinfo --wlan
> hal.1: read hal dataprocess 1568: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
22: PCMCIA 00.0: 0282 WLAN controller                           
  [Created at pcmcia.84]
  Unique ID: YGy2.jrBDbmL7DWA
  Parent ID: GA8e.ooft8hokfRB
  SysFS ID: /devices/pci0000:00/0000:00:0a.0/0000:02:01.0/0.0
  SysFS BusID: 0.0
  Hardware Class: network
  Model: "Avaya Communication Avaya Wireless PC Card"
  Hotplug: CardBus
  Socket: 0
  Vendor: pcmcia 0x0156 "Avaya Communication"
  Device: pcmcia 0x0002 "Avaya Wireless PC Card"
  Features: WLAN
  Module Alias: "pcmcia:m0156c0002f06fn00pfn00paD8A43B78pb0D341169pcD27DEB1Apd00000000"
  Driver Info #0:
    Driver Status: hostap_cs is not active
    Driver Activation Cmd: "modprobe hostap_cs"
  Driver Info #1:
    Driver Status: orinoco_cs is active
    Driver Activation Cmd: "modprobe orinoco_cs"
  Extra Info: Avaya Communication, Avaya Wireless PC Card, Version 01.01
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #17 (CardBus bridge)
pepa@pepa-A4D:~$ hwinfo --pcmcia
> hal.1: read hal dataprocess 1577: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
22: PCMCIA 00.0: 0282 WLAN controller                           
  [Created at pcmcia.84]
  Unique ID: YGy2.jrBDbmL7DWA
  Parent ID: GA8e.ooft8hokfRB
  SysFS ID: /devices/pci0000:00/0000:00:0a.0/0000:02:01.0/0.0
  SysFS BusID: 0.0
  Hardware Class: network
  Model: "Avaya Communication Avaya Wireless PC Card"
  Hotplug: CardBus
  Socket: 0
  Vendor: pcmcia 0x0156 "Avaya Communication"
  Device: pcmcia 0x0002 "Avaya Wireless PC Card"
  Features: WLAN
  Module Alias: "pcmcia:m0156c0002f06fn00pfn00paD8A43B78pb0D341169pcD27DEB1Apd00000000"
  Driver Info #0:
    Driver Status: hostap_cs is not active
    Driver Activation Cmd: "modprobe hostap_cs"
  Driver Info #1:
    Driver Status: orinoco_cs is active
    Driver Activation Cmd: "modprobe orinoco_cs"
  Extra Info: Avaya Communication, Avaya Wireless PC Card, Version 01.01
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #17 (CardBus bridge)

[jAster_BA]

Našiel som dačo

Kód: [Vybrat]

...You have moved agere_ap_fw.bin and agere_sta_fw.bin from /lib/firmware to /
Now agere_ap_fw.bin and agere_sta_fw.bin will not be loaded by orinoco_cs driver module
http://ubuntuforums.org/showthread.php?t=1593250&page=3 skús najskôr

Kód: [Vybrat]

modprobe hostap_cs

[skaut1]

Našiel som dačo

Kód: [Vybrat]

...You have moved agere_ap_fw.bin and agere_sta_fw.bin from /lib/firmware to /
Now agere_ap_fw.bin and agere_sta_fw.bin will not be loaded by orinoco_cs driver module
http://ubuntuforums.org/showthread.php?t=1593250&page=3 skús najskôr

Kód: [Vybrat]

modprobe hostap_cs

neumim nejak extra anglicky a zatim jsem to stale nerozchodil. vypada to, ze tu provrtam zed a budu pichly jen na kabelu,ten aspon jde,nebo bych zkusil jeste si pujcit nejakou jinou kartu, ktera by tam treba sla.

[jAster_BA]

Kludne na to použi google prekladač a rob to čo sa tam radí.