Zyxel NWD2105 USB WLAN @ xubuntu 11.04

[merlo]

Zdravim, mohl by mi prosim nekdo poradit, jak tento adapter (Zyxel NWD2105) zprovoznit v xubuntu, konkretne 11.04?

Jedine co jsem doposud nasel je tento navod na instalaci ovladace,

Here you can download the Driver for Zyxel NWD2105 USB Wlan Stick

Its working fine under Linux e.g. Ubuntu...

To Install just use:
cd /usr/src
wget http://eimer.ch/nwd2105.tar
tar xf nwd2105.tar
cd 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO
make
make install


After you have installed everything, you have to configure the Stick by editing the File: /etc/Wireless/RT2870STA/RT2870STA.dat

Then fire up the interface with "ifconfig ra0 192.168.0.2 netmask 255.255.255.0 up"

If the System really hangs now, just unplug the USB Stick and change the configuration, because he isnt able to connect to the Accesspoint. Do this until the ifconfig up works and the Stick is ready to use (Check State with "iwconfig")

If the Driver dont loads from it self, load the module manuall by "modprobe rt3070sta"

Be sure that you have installed Kernel headers!
This is the original Ralink Driver with some small modifications that it runs with the Zyxel USB Stick
And big thanks to some forums and Ralink for the sources

have a lot of fun...

Contact me under cyberbob a't eimer.ch

ale bohuzel si s tim vubec nevim rady. Nenasel jsem ani ten "system profiler", ktery v 10.10 byl (pokud se nepletu).

Predem dekuji.

[jAster_BA]

Aký SP? Stačí

Kód: [Vybrat]

cd /usr/src
wget http://eimer.ch/nwd2105.tar
tar xf nwd2105.tar
cd 2011_0107_RT3070_RT3370_Linux_STA_v2.5.0.1_DPO
make
make install
A potom editovať RT2870STA.dat

[merlo]

Po zadani druheho prikazu mi to vyhodi chybu "operace zamitnuta":

EDIT: Zapomnel jsem na sudo, nicmene opravdu netusim jak nakonfigurovat onen soubor.

Kód: [Vybrat]

#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
ChannelGeography=1
SSID=11n-AP
NetworkType=Infra
WirelessMode=5
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
PktAggregate=0
WmmCapable=1
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
AutoRoaming=0
RoamThreshold=70
APSDCapable=0
APSDAC=0;0;0;0
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=0
HT_MpduDensity=4
HT_BW=1
HT_BADecline=0
HT_AutoBA=1
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
HT_DisallowTKIP=1
HT_STBC=0
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0
AntDiversity=0
BeaconLostTime=4
FtSupport=0
Wapiifname=ra0
WapiPsk=
WapiPskType=
WapiUserCertPath=
WapiAsCertPath=
PSP_XLINK_MODE=0
WscManufacturer=
WscModelName=
WscDeviceName=
WscModelNumber=
WscSerialNumber=
RadioOn=1



[jAster_BA]

A nepíše sa dakde o tom ako to upraviť?

[merlo]

Na te strance ne. Ja ji nasel pres google.

Kód: [Vybrat]

http://eimer.ch/nwd2105.html
Nejake info je treba zde:

Kód: [Vybrat]

http://forums.opensuse.org/english/get-help-here/hardware/408382-help-install-driver.html
nebo obecne po zadani RT2870STA.dat do Google.

A tady snad nejpodrobneji:

Kód: [Vybrat]

http://forum.ubuntu.cz/index.php?topic=50116.0;wap2

[jAster_BA]

Možno lahšia cesta by bola použiť ndiswrapper.