moc děkuji!
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 339f4771-9c9b-4422-b17c-042466269a71 root
set
prefix=($root)/boot/grub---------------------------------------------------
-----------------------------.
=> No known boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdb2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 320,1 GB, 320 072 933 376 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 38 913, celkem 625 142 448 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 583,196,671 583,194,624 7 NTFS / exFAT / HPFS
/dev/sda2 583,196,672 625,135,615 41,938,944 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 120,0 GB, 120 034 123 776 bajtů
hlav: 255, sektorů na stopu: 63, cylindrů: 14 593, celkem 234 441 648 sektorů
Jednotky = sektory po 1 * 512 = 512 bajtech
Velikost sektoru (logického/fyzického): 512 bajtů / 512 bajtů
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 70 192,485,835 192,485,766 7 NTFS / exFAT / HPFS
/dev/sdb2 192,487,424 234,430,463 41,943,040 83 Linux
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 A2BEF850BEF81E8B ntfs DATA
/dev/sda2 b10363f8-c0d2-4801-ac4a-efe95ec1d757 ext4
/dev/sdb1 0660917060916769 ntfs Windows7_OS
/dev/sdb2 339f4771-9c9b-4422-b17c-042466269a71 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda2 /home ext4 (rw,commit=0)
/dev/sdb2 / ext4 (rw,errors=remount-ro,commit=0)
=========================== sdb2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="${saved_entry}"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
set locale_dir=($root)/boot/grub/locale
set lang=cs_CZ
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
insmod jpeg
if background_image /boot/grub/ThrowingStones.jpg; then
true
else
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
savedefault
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=339f4771-9c9b-4422-b17c-042466269a71 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
echo 'Loading Linux 2.6.38-11-generic ...'
linux /boot/vmlinuz-2.6.38-11-generic root=UUID=339f4771-9c9b-4422-b17c-042466269a71 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-11-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
savedefault
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=339f4771-9c9b-4422-b17c-042466269a71 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=339f4771-9c9b-4422-b17c-042466269a71 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdb,msdos2)'
search --no-floppy --fs-uuid --set=root 339f4771-9c9b-4422-b17c-042466269a71
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os {
savedefault
insmod part_msdos
insmod ntfs
set root='(/dev/sdb,msdos1)'
search --no-floppy --fs-uuid --set=root 0660917060916769
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb2 during installation
UUID=339f4771-9c9b-4422-b17c-042466269a71 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda2 during installation
UUID=b10363f8-c0d2-4801-ac4a-efe95ec1d757 /home ext4 defaults 0 2
/dev/sdb2 / ext4 discard,defaults,noatime 0 1
--------------------------------------------------------------------------------
=================== sdb2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
103.919696808 = 111.582924800 boot/grub/core.img 1
102.096446991 = 109.625225216 boot/grub/grub.cfg 1
94.445865631 = 101.410476032 boot/initrd.img-2.6.38-11-generic 2
93.730468750 = 100.642324480 boot/initrd.img-2.6.38-8-generic 2
93.699531555 = 100.609105920 boot/vmlinuz-2.6.38-11-generic 1
103.917972565 = 111.581073408 boot/vmlinuz-2.6.38-8-generic 1
94.445865631 = 101.410476032 initrd.img 2
93.730468750 = 100.642324480 initrd.img.old 2
93.699531555 = 100.609105920 vmlinuz 1
103.917972565 = 111.581073408 vmlinuz.old 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown MBR on /dev/sdb
00000000 eb 0e 03 00 04 00 c0 02 00 00 00 00 00 00 4e 50 |..............NP|
00000010 fa 33 c0 bc 00 66 8e d0 50 07 50 1f fb fc be 09 |.3...f..P.P.....|
00000020 00 89 14 bf 00 08 be 00 7c b9 00 01 f3 a5 50 bf |........|.....P.|
00000030 34 08 57 cb bb 00 06 be 02 08 0f b6 0c b8 01 02 |4.W.............|
00000040 ba 80 00 cd 13 ba 05 00 bf 00 06 b9 00 02 e8 24 |...............$|
00000050 01 b9 05 00 bb 00 12 be 00 06 03 f1 e8 ff 00 eb |................|
00000060 0a b3 01 be a7 12 88 1c e9 89 00 e8 2d 00 3c 01 |............-.<.|
00000070 74 ef e8 52 00 3c 01 74 e8 ba 04 00 bf 00 0a b9 |t..R.<.t........|
00000080 a7 08 e8 f0 00 e8 35 05 e9 88 01 be 05 08 0a 04 |......5.........|
00000090 88 04 b1 01 bb 00 08 e8 b9 00 c3 be 00 06 e8 17 |................|
000000a0 00 be 23 06 80 3c 00 74 0c 3c 00 74 08 b0 02 e8 |..#..<.t.<.t....|
000000b0 d9 ff b0 01 c3 b0 00 c3 b9 00 02 4e 32 c0 8b d9 |...........N2...|
000000c0 8a 10 32 c2 e2 f8 c3 b9 05 00 51 b8 00 02 f7 e1 |..2.......Q.....|
000000d0 05 00 08 8b f0 e8 e0 ff 5e 56 0f b6 8c 05 06 e3 |........^V......|
000000e0 04 38 c1 75 06 59 e2 e2 b0 00 c3 59 b0 01 e8 9a |.8.u.Y.....Y....|
000000f0 ff b0 01 c3 be 07 08 0f b6 0c b8 01 02 bb 00 7c |...............||
00000100 ba 80 00 cd 13 be 00 7c e8 ad ff be 06 08 0f b6 |.......|........|
00000110 0c e3 1c 38 c1 74 18 b0 04 e8 6f ff be af 07 e8 |...8.t....o.....|
00000120 8c 02 be a7 12 80 3c 01 74 03 e8 0a 01 cd 18 be |......<.t.......|
00000130 be 09 bf be 7d b9 20 00 f3 a5 ba 04 00 bf 00 7c |....}. ........||
00000140 b9 be 01 e8 2f 00 be 09 00 8b 14 33 c0 50 bf 00 |..../......3.P..|
00000150 7c 57 cb 32 ed b8 01 03 ba 80 00 cd 13 c3 51 4e ||W.2..........QN|
00000160 0f b6 0c e3 08 b8 01 02 ba 80 00 cd 13 81 eb 00 |................|
00000170 02 59 e2 ea c3 52 57 51 b8 00 bb cd 1a 72 2b 66 |.Y...RWQ.....r+f|
00000180 83 f8 00 75 25 81 f9 02 01 7c 1f 66 81 fb 54 43 |...u%....|.f..TC|
00000190 50 41 75 16 33 c0 8e c0 66 33 f6 b8 07 bb 66 33 |PAu.3...f3....f3|
000001a0 c9 66 33 d2 59 5f 5a cd 1a c3 59 5f 5a c3 00 00 |.f3.Y_Z...Y_Z...|
000001b0 6d 00 00 00 00 62 7a 99 d6 3a 4c 34 00 00 80 01 |m....bz..:L4....|
000001c0 08 00 07 fe ff ff 46 00 00 00 86 19 79 0b 00 fe |......F.....y...|
000001d0 ff ff 83 fe ff ff 00 20 79 0b 00 00 80 02 00 00 |....... y.......|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
unlzma: Decoder error
Téma: dualboot z mSata [vyřešeno] (Přečteno 2227 krát)
