Prosíme přihlašte se nebo zaregistrujte.

Přihlašte se svým uživatelským jménem a heslem.
Vaše pomoc je stále potřeba!

Autor Téma: Zmena rozlisenia prihlasovacej obrazovky- help  (Přečteno 3116 krát)

Andrej Galbavý

  • Návštěvník
  • Příspěvků: 87
Zmena rozlisenia prihlasovacej obrazovky- help
« kdy: 29 Října 2006, 19:14:32 »
Cavec lidi, neviem ako mam zmenit rozlisenie prihlasovacej obrazovky v Ubuntu 6.06.1, ide o to, ze pouzivam rozlisenie v gnome 1024x768, a rozlisenie prihlasovacej obrazovky je asi 800x600 ( tipujem), az tak by mi to nevadilo, ale problem je v tom, ze mam posunuty obraz dolava a musel by som ho na monitore nastavit, ale pri spusteni Gnome by sa mi opet posunul obraz. Predtym to fungovalo bez problemov, neviem preco sa mi to zmenilo.

No mozno som sa dobre nevyjadril, potrebujem zmenit rozlisenie obrazovky gdm temy, alebo inak povedane prihlasovacej obrazovky, lebo je to strasne posunute do strany. Hladal som na webe, ale nic rozumne som nenasiel, ak vie niekto ako na to, budem rad, za pripadne rady dakujem.

Andrej Galbavý

  • Návštěvník
  • Příspěvků: 87
Zmena rozlisenia prihlasovacej obrazovky- help
« Odpověď #1 kdy: 01 Listopadu 2006, 17:43:44 »
neviete teda nikto ako sa to da opravit, lebo dost ma to stve... :-(

LS

  • Závislák
  • ***
  • Příspěvků: 3849
    • http://linux.euweb.cz
Zmena rozlisenia prihlasovacej obrazovky- help
« Odpověď #2 kdy: 01 Listopadu 2006, 17:55:41 »
Upravte rozliseni primo v /etc/X11/xorg.conf. Smazte vsechna rozliseni pro vsechny barevne hloubky, nechte tam jen to ktere pozadujete.

Andrej Galbavý

  • Návštěvník
  • Příspěvků: 87
Zmena rozlisenia prihlasovacej obrazovky- help
« Odpověď #3 kdy: 01 Listopadu 2006, 18:09:14 »
Citace: lukas.svoboda
Upravte rozliseni primo v /etc/X11/xorg.conf. Smazte vsechna rozliseni pro vsechny barevne hloubky, nechte tam jen to ktere pozadujete.
Toto je moj xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
  FontPath "/usr/share/X11/fonts/misc"
  FontPath "/usr/share/X11/fonts/cyrillic"
  FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
  FontPath "/usr/share/X11/fonts/Type1"
  FontPath "/usr/share/X11/fonts/100dpi"
  FontPath "/usr/share/X11/fonts/75dpi"
  # path to defoma fonts
  FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "sk"
  option "XkbVariant" "qwerty"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/wacom"# Change to
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/wacom"# Change to
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/wacom"# Change to
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "Device"
  identifier "NVIDIA Corporation NV5 [RIVA TNT2/TNT2 Pro]"
  boardname "nv"
  busid "PCI:1:0:0"
  driver "nvidia"
  screen 0
EndSection

Section "Monitor"
  identifier "Generic Monitor"
  vendorname "ADI"
  modelname "ADI MicroScan 4V"
  HorizSync 30-64
  VertRefresh 50-95
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x768@54" 64.995 1152 1178 1314 1472 768 771 777 806 +hsync +vsync
  modeline  "1280x854" 80.0 1280 1309 1460 1636 854 857 864 896 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "NVIDIA Corporation NV5 [RIVA TNT2/TNT2 Pro]"
  Monitor "Generic Monitor"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    virtual 1280 1024
    modes "1280x960@60" "1280x1024@60" "1280x854" "1152x768@54" "1024x768@43" "1024x768@60" "1024x768@70" "1024x768@75" "832x624@75" "800x600@60" "800x600@85" "800x600@75" "800x600@72" "800x600@56" "640x480@85" "640x480@75" "640x480@72" "640x480@60"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "ServerFlags"
EndSection


V ktorej sekcii to mam zmenit, screen, alebo monitor ?

Rudovsky Jan

  • Návštěvník
  • Příspěvků: 30
    • http://www.stylovyweb.cz
Zmena rozlisenia prihlasovacej obrazovky- help
« Odpověď #4 kdy: 01 Listopadu 2006, 23:25:28 »
Screen

Andrej Galbavý

  • Návštěvník
  • Příspěvků: 87
Zmena rozlisenia prihlasovacej obrazovky- help
« Odpověď #5 kdy: 02 Listopadu 2006, 18:10:55 »
Super, pomohlo to, uz ma to nerozculuje ....
Vdaka za pomoc, TEMA VYRIESENA.

TiToX

  • Návštěvník
  • Příspěvků: 10
Zmena rozlisenia prihlasovacej obrazovky- help
« Odpověď #6 kdy: 23 Ledna 2007, 22:47:07 »
no do ... vtaka a ja mam ten isty problem ale tento postup u man nic neviriesil a neviem co s tym  PROSIIIIMMMM poradte


Section "Module"
  Load "i2c"
  Load "bitmap"
  Load "ddc"
  Load "extmod"
  Load "freetype"
  Load "int10"
  Load "type1"
  Load "vbe"
  load "glx"
  load "GLcore"
  load "v4l"
EndSection

Section "InputDevice"
  Identifier "Generic Keyboard"
  Driver "kbd"
  option "CoreKeyboard"
  option "XkbRules" "xorg"
  option "XkbModel" "pc105"
  option "XkbLayout" "sk"
  option "XkbOptions" "lv3:ralt_switch"
  option "XkbVariant" "qwerty"
EndSection

Section "InputDevice"
  Identifier "Configured Mouse"
  Driver "mouse"
  option "CorePointer"
  option "Device" "/dev/input/mice"
  option "Protocol" "ExplorerPS/2"
  option "ZAxisMapping" "4 5"
  option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "stylus"
  option "Device" "/dev/wacom"# Change to
  option "Type" "stylus"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "eraser"
  option "Device" "/dev/wacom"# Change to
  option "Type" "eraser"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "InputDevice"
  Driver "wacom"
  Identifier "cursor"
  option "Device" "/dev/wacom"# Change to
  option "Type" "cursor"
  option "ForceDevice" "ISDV4"# Tablet PC ONLY
  # /dev/input/event
  # for USB
EndSection

Section "Device"
  identifier "ATI Technologies, Inc. RV280 [Radeon 9200]"
  boardname "ati"
  busid "PCI:2:0:0"
  driver "ati"
  screen 0
  option "MergedFB" "off"
EndSection

Section "Monitor"
  identifier "PHILIPS 107P"
  vendorname "Plug 'n' Play"
  modelname "Plug 'n' Play"
  modeline  "1024x768@85" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  gamma 1.0
EndSection

Section "Screen"
  Identifier "Default Screen"
  Device "ATI Technologies, Inc. RV280 [Radeon 9200]"
  Monitor "PHILIPS 107P"
  DefaultDepth 24
  SubSection "Display"
    depth 24
    virtual 1024 768
    modes "1024x768@85"
  EndSubSection
EndSection

Section "ServerLayout"
  Identifier "Default Layout"
  screen 0 "Default Screen" 0 0
  InputDevice "Generic Keyboard"
  InputDevice "Configured Mouse"
  InputDevice "stylus" "SendCoreEvents"
  InputDevice "cursor" "SendCoreEvents"
  InputDevice "eraser" "SendCoreEvents"
EndSection

Section "DRI"
  Mode 0666
EndSection
Section "device" #  
  identifier "device1"
  boardname "ati"
  busid "PCI:2:0:0"
  driver "ati"
  screen 1
  option "MergedFB" "off"
EndSection
Section "screen" #  
  identifier "screen1"
  device "device1"
  defaultdepth 24
  monitor "monitor1"
  SubSection "Display"
    depth 24
    modes "1024x768@85"
  EndSubSection
EndSection
Section "monitor" #  
  identifier "monitor1"
  vendorname "Plug 'n' Play"
  modelname "Plug 'n' Play"
  modeline  "1024x768@85" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  gamma 1.0
EndSection
Section "ServerFlags"
EndSection
Ubuntu 6,10  + Kubuntu-desktop - - - - Yea

TiToX

  • Návštěvník
  • Příspěvků: 10
Zmena rozlisenia prihlasovacej obrazovky- help
« Odpověď #7 kdy: 25 Ledna 2007, 14:22:39 »
Moja prihasovacia obrazovka ma stale 640x480 a nejde to niako zmenit ani upravov  /etc/X11/xorg.conf   som to nezmenil .ako na to  ?
Ubuntu 6,10  + Kubuntu-desktop - - - - Yea

 

Provoz zaštiťuje spolek OpenAlt.